Renamed ArmPlatformPkg/ArmVirtualizationPkg into ArmVirtPkg

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17537 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 389 insertions, 0 deletions

diff --git a/ArmVirtPkg/ArmVirtQemu.fdf b/ArmVirtPkg/ArmVirtQemu.fdf
new file mode 100644
index 0000000..73d088a
--- /dev/null
+++ b/ArmVirtPkg/ArmVirtQemu.fdf
@@ -0,0 +1,389 @@
+#

+#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.

+#  Copyright (c) 2014, Linaro Limited. All rights reserved.

+#

+#  This program and the accompanying materials

+#  are licensed and made available under the terms and conditions of the BSD License

+#  which accompanies this distribution.  The full text of the license may be found at

+#  http://opensource.org/licenses/bsd-license.php

+#

+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+#

+

+################################################################################

+#

+# FD Section

+# The [FD] Section is made up of the definition statements and a

+# description of what goes into  the Flash Device Image.  Each FD section

+# defines one flash "device" image.  A flash device image may be one of

+# the following: Removable media bootable image (like a boot floppy

+# image,) an Option ROM image (that would be "flashed" into an add-in

+# card,) a System "Flash"  image (that would be burned into a system's

+# flash) or an Update ("Capsule") image that will be used to update and

+# existing system flash.

+#

+################################################################################

+

+[FD.QEMU_EFI]

+BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM

+Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device

+ErasePolarity = 1

+

+# This one is tricky, it must be: BlockSize * NumBlocks = Size

+BlockSize     = 0x00001000

+NumBlocks     = 0x200

+

+################################################################################

+#

+# Following are lists of FD Region layout which correspond to the locations of different

+# images within the flash device.

+#

+# Regions must be defined in ascending order and may not overlap.

+#

+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

+# the pipe "|" character, followed by the size of the region, also in hex with the leading

+# "0x" characters. Like:

+# Offset|Size

+# PcdOffsetCName|PcdSizeCName

+# RegionType <FV, DATA, or FILE>

+#

+################################################################################

+

+#

+# UEFI has trouble dealing with FVs that reside at physical address 0x0.

+# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the

+# real FV at offset 0x1000

+#

+0x00000000|0x00001000

+DATA = {

+!if $(ARCH) == AARCH64

+  0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM

+!else

+  0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM

+!endif

+}

+

+0x00001000|0x001ff000

+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize

+FV = FVMAIN_COMPACT

+

+

+################################################################################

+#

+# FV Section

+#

+# [FV] section is used to define what components or modules are placed within a flash

+# device file.  This section also defines order the components and modules are positioned

+# within the image.  The [FV] section consists of define statements, set statements and

+# module statements.

+#

+################################################################################

+

+[FV.FvMain]

+BlockSize          = 0x40

+NumBlocks          = 0         # This FV gets compressed so make it just big enough

+FvAlignment        = 16        # FV alignment and FV attributes setting.

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  APRIORI DXE {

+    INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

+    INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf

+  }

+  INF MdeModulePkg/Core/Dxe/DxeMain.inf

+  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf

+  INF ArmVirtPkg/VirtFdtDxe/VirtFdtDxe.inf

+

+  #

+  # PI DXE Drivers producing Architectural Protocols (EFI Services)

+  #

+  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf

+  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf

+  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf

+  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

+  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf

+!if $(SECURE_BOOT_ENABLE) == TRUE

+  INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf

+  INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf

+!else

+  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf

+!endif

+  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf

+  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf

+  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf

+  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

+  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

+

+  #

+  # Multiple Console IO support

+  #

+  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf

+  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf

+  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf

+  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

+  INF EmbeddedPkg/SerialDxe/SerialDxe.inf

+

+  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf

+  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf

+!if $(SECURE_BOOT_ENABLE) == TRUE

+  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashAuthenticatedDxe.inf

+!else

+  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf

+!endif

+  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf

+

+  #

+  # FAT filesystem + GPT/MBR partitioning

+  #

+  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

+  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

+  INF FatBinPkg/EnhancedFatDxe/Fat.inf

+  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

+

+  #

+  # Platform Driver

+  #

+  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf

+  INF OvmfPkg/VirtioNetDxe/VirtioNet.inf

+  INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf

+

+  #

+  # UEFI application (Shell Embedded Boot Loader)

+  #

+  INF ShellPkg/Application/Shell/Shell.inf

+

+  #

+  # Bds

+  #

+  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf

+!ifdef INTEL_BDS

+  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf

+  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf

+  INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf

+!else

+  INF ArmPlatformPkg/Bds/Bds.inf

+!endif

+

+  #

+  # Networking stack

+  #

+  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf

+  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf

+  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf

+  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf

+  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf

+  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf

+  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf

+  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf

+  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf

+

+  #

+  # SCSI Bus and Disk Driver

+  #

+  INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf

+  INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf

+

+  #

+  # ACPI Support

+  #

+  INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf

+  INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf

+

+  #

+  # PCI support

+  #

+  INF ArmVirtPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf

+  INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf

+  INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf

+

+  #

+  # Video support

+  #

+  INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf

+  INF OvmfPkg/PlatformDxe/Platform.inf

+

+  #

+  # USB Support

+  #

+  INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf

+  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf

+  INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf

+  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf

+

+!ifdef INTEL_BDS

+  #

+  # TianoCore logo (splash screen)

+  #

+  FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {

+    SECTION RAW = MdeModulePkg/Logo/Logo.bmp

+  }

+!endif

+

+[FV.FVMAIN_COMPACT]

+FvAlignment        = 16

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  APRIORI PEI {

+    INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf

+  }

+  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf

+  INF MdeModulePkg/Core/Pei/PeiMain.inf

+  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf

+  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf

+  INF ArmPkg/Drivers/CpuPei/CpuPei.inf

+  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf

+!if $(SECURE_BOOT_ENABLE) == TRUE

+  INF SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf

+!else

+  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf

+!endif

+  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

+

+  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {

+    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {

+      SECTION FV_IMAGE = FVMAIN

+    }

+  }

+

+

+################################################################################

+#

+# Rules are use with the [FV] section's module INF type to define

+# how an FFS file is created for a given INF file. The following Rule are the default

+# rules for the different module type. User can add the customized rules to define the

+# content of the FFS file.

+#

+################################################################################

+

+

+############################################################################

+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #

+############################################################################

+#

+#[Rule.Common.DXE_DRIVER]

+#  FILE DRIVER = $(NAMED_GUID) {

+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+#    COMPRESS PI_STD {

+#      GUIDED {

+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+#        UI       STRING="$(MODULE_NAME)" Optional

+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+#      }

+#    }

+#  }

+#

+############################################################################

+

+[Rule.Common.SEC]

+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

+    TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.PEI_CORE]

+  FILE PEI_CORE = $(NAMED_GUID) {

+    TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI     STRING ="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM]

+  FILE PEIM = $(NAMED_GUID) {

+     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex

+     TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi

+     UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM.TIANOCOMPRESSED]

+  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {

+    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex

+    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {

+      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+      UI        STRING="$(MODULE_NAME)" Optional

+    }

+  }

+

+[Rule.Common.DXE_CORE]

+  FILE DXE_CORE = $(NAMED_GUID) {

+    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_RUNTIME_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_APPLICATION]

+  FILE APPLICATION = $(NAMED_GUID) {

+    UI     STRING ="$(MODULE_NAME)"     Optional

+    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.UEFI_DRIVER.BINARY]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX DXE_DEPEX Optional      |.depex

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.UEFI_APPLICATION.BINARY]

+  FILE APPLICATION = $(NAMED_GUID) {

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.USER_DEFINED.ACPITABLE]

+  FILE FREEFORM = $(NAMED_GUID) {

+    RAW       ACPI                    |.acpi

+    RAW       ASL                     |.aml

+    UI        STRING="$(MODULE_NAME)" Optional

+  }