diff options
author | Ard Biesheuvel <ard.biesheuvel@linaro.org> | 2018-12-18 14:10:12 +0100 |
---|---|---|
committer | Ard Biesheuvel <ard.biesheuvel@linaro.org> | 2018-12-20 12:41:21 +0100 |
commit | 5afabd5ec373f1e37e9b6cdd85b68e08e8f016fb (patch) | |
tree | ba71f92221e852e82b8345c93c3ffb445b9c024c /ArmPlatformPkg | |
parent | e3fa3d83e7c7e8830b31c9d916c0206a71bf2b48 (diff) | |
download | edk2-5afabd5ec373f1e37e9b6cdd85b68e08e8f016fb.zip edk2-5afabd5ec373f1e37e9b6cdd85b68e08e8f016fb.tar.gz edk2-5afabd5ec373f1e37e9b6cdd85b68e08e8f016fb.tar.bz2 |
ArmPlatformPkg/SP805WatchdogDxe: switch to interrupt mode
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Diffstat (limited to 'ArmPlatformPkg')
-rw-r--r-- | ArmPlatformPkg/ArmPlatformPkg.dec | 1 | ||||
-rw-r--r-- | ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c | 100 | ||||
-rw-r--r-- | ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf | 6 |
3 files changed, 80 insertions, 27 deletions
diff --git a/ArmPlatformPkg/ArmPlatformPkg.dec b/ArmPlatformPkg/ArmPlatformPkg.dec index 5f67e74..44c00bd 100644 --- a/ArmPlatformPkg/ArmPlatformPkg.dec +++ b/ArmPlatformPkg/ArmPlatformPkg.dec @@ -70,6 +70,7 @@ ## SP805 Watchdog
gArmPlatformTokenSpaceGuid.PcdSP805WatchdogBase|0x0|UINT32|0x00000023
gArmPlatformTokenSpaceGuid.PcdSP805WatchdogClockFrequencyInHz|32000|UINT32|0x00000021
+ gArmPlatformTokenSpaceGuid.PcdSP805WatchdogInterrupt|0|UINT32|0x0000002E
## PL011 UART
gArmPlatformTokenSpaceGuid.PL011UartClkInHz|24000000|UINT32|0x0000001F
diff --git a/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c b/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c index 12c2f0a..5bbb12a 100644 --- a/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c +++ b/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c @@ -21,12 +21,17 @@ #include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Protocol/HardwareInterrupt.h>
#include <Protocol/WatchdogTimer.h>
#include "SP805Watchdog.h"
-STATIC EFI_EVENT mEfiExitBootServicesEvent;
+STATIC EFI_EVENT mEfiExitBootServicesEvent;
+STATIC EFI_HARDWARE_INTERRUPT_PROTOCOL *mInterrupt;
+STATIC EFI_WATCHDOG_TIMER_NOTIFY mWatchdogNotify;
+STATIC UINT32 mTimerPeriod;
/**
Make sure the SP805 registers are unlocked for writing.
@@ -65,6 +70,33 @@ SP805Lock ( }
}
+STATIC
+VOID
+EFIAPI
+SP805InterruptHandler (
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ SP805Unlock ();
+ MmioWrite32 (SP805_WDOG_INT_CLR_REG, 0); // write of any value clears the irq
+ SP805Lock ();
+
+ mInterrupt->EndOfInterrupt (mInterrupt, Source);
+
+ //
+ // The notify function should be called with the elapsed number of ticks
+ // since the watchdog was armed, which should exceed the timer period.
+ // We don't actually know the elapsed number of ticks, so let's return
+ // the timer period plus 1.
+ //
+ if (mWatchdogNotify != NULL) {
+ mWatchdogNotify (mTimerPeriod + 1);
+ }
+
+ gRT->ResetSystem (EfiResetCold, EFI_TIMEOUT, 0, NULL);
+}
+
/**
Stop the SP805 watchdog timer from counting down by disabling interrupts.
**/
@@ -149,9 +181,16 @@ SP805RegisterHandler ( IN EFI_WATCHDOG_TIMER_NOTIFY NotifyFunction
)
{
- // ERROR: This function is not supported.
- // The hardware watchdog will reset the board
- return EFI_INVALID_PARAMETER;
+ if (mWatchdogNotify == NULL && NotifyFunction == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (mWatchdogNotify != NULL && NotifyFunction != NULL) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ mWatchdogNotify = NotifyFunction;
+ return EFI_SUCCESS;
}
/**
@@ -202,19 +241,16 @@ SP805SetTimerPeriod ( SP805Stop ();
} else {
// Calculate the Watchdog ticks required for a delay of (TimerTicks * 100) nanoseconds
- // The SP805 will count down to ZERO once, generate an interrupt and
- // then it will again reload the initial value and start again.
- // On the second time when it reaches ZERO, it will actually reset the board.
- // Therefore, we need to load half the required delay.
+ // The SP805 will count down to zero and generate an interrupt.
//
- // WatchdogTicks = ((TimerPeriod * 100 * SP805_CLOCK_FREQUENCY) / 1GHz) / 2 ;
+ // WatchdogTicks = ((TimerPeriod * 100 * SP805_CLOCK_FREQUENCY) / 1GHz);
//
// i.e.:
//
- // WatchdogTicks = (TimerPeriod * SP805_CLOCK_FREQUENCY) / 20 MHz ;
+ // WatchdogTicks = (TimerPeriod * SP805_CLOCK_FREQUENCY) / 10 MHz ;
Ticks64bit = MultU64x32 (TimerPeriod, PcdGet32 (PcdSP805WatchdogClockFrequencyInHz));
- Ticks64bit = DivU64x32 (Ticks64bit, 20000000);
+ Ticks64bit = DivU64x32 (Ticks64bit, 10 * 1000 * 1000);
// The registers in the SP805 are only 32 bits
if (Ticks64bit > MAX_UINT32) {
@@ -233,9 +269,12 @@ SP805SetTimerPeriod ( SP805Start ();
}
+ mTimerPeriod = TimerPeriod;
+
EXIT:
// Ensure the watchdog is locked before exiting.
SP805Lock ();
+ ASSERT_EFI_ERROR (Status);
return Status;
}
@@ -262,25 +301,11 @@ SP805GetTimerPeriod ( OUT UINT64 *TimerPeriod
)
{
- UINT64 ReturnValue;
-
if (TimerPeriod == NULL) {
return EFI_INVALID_PARAMETER;
}
- // Check if the watchdog is stopped
- if ((MmioRead32 (SP805_WDOG_CONTROL_REG) & SP805_WDOG_CTRL_INTEN) == 0) {
- // It is stopped, so return zero.
- ReturnValue = 0;
- } else {
- // Convert the Watchdog ticks into TimerPeriod
- // Ensure 64bit arithmetic throughout because the Watchdog ticks may already
- // be at the maximum 32 bit value and we still need to multiply that by 600.
- ReturnValue = MultU64x32 (MmioRead32 (SP805_WDOG_LOAD_REG), 600);
- }
-
- *TimerPeriod = ReturnValue;
-
+ *TimerPeriod = mTimerPeriod;
return EFI_SUCCESS;
}
@@ -343,6 +368,11 @@ SP805Initialize ( EFI_STATUS Status;
EFI_HANDLE Handle;
+ // Find the interrupt controller protocol. ASSERT if not found.
+ Status = gBS->LocateProtocol (&gHardwareInterruptProtocolGuid, NULL,
+ (VOID **)&mInterrupt);
+ ASSERT_EFI_ERROR (Status);
+
// Unlock access to the SP805 registers
SP805Unlock ();
@@ -350,13 +380,31 @@ SP805Initialize ( SP805Stop ();
// Set the watchdog to reset the board when triggered
+ // This is a last resort in case the interrupt handler fails
if ((MmioRead32 (SP805_WDOG_CONTROL_REG) & SP805_WDOG_CTRL_RESEN) == 0) {
MmioOr32 (SP805_WDOG_CONTROL_REG, SP805_WDOG_CTRL_RESEN);
}
+ // Clear any pending interrupts
+ MmioWrite32 (SP805_WDOG_INT_CLR_REG, 0); // write of any value clears the irq
+
// Prohibit any rogue access to SP805 registers
SP805Lock ();
+ if (PcdGet32 (PcdSP805WatchdogInterrupt) > 0) {
+ Status = mInterrupt->RegisterInterruptSource (mInterrupt,
+ PcdGet32 (PcdSP805WatchdogInterrupt),
+ SP805InterruptHandler);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: failed to register watchdog interrupt - %r\n",
+ __FUNCTION__, Status));
+ return Status;
+ }
+ } else {
+ DEBUG ((DEBUG_WARN, "%a: no interrupt specified, running in RESET mode only\n",
+ __FUNCTION__));
+ }
+
//
// Make sure the Watchdog Timer Architectural Protocol has not been installed in the system yet.
// This will avoid conflicts with the universal watchdog
diff --git a/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf b/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf index c3971fb..0e744de 100644 --- a/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf +++ b/ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf @@ -27,6 +27,7 @@ [Packages]
ArmPkg/ArmPkg.dec
ArmPlatformPkg/ArmPlatformPkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
MdePkg/MdePkg.dec
[LibraryClasses]
@@ -35,13 +36,16 @@ IoLib
UefiBootServicesTableLib
UefiDriverEntryPoint
+ UefiRuntimeServicesTableLib
[Pcd]
gArmPlatformTokenSpaceGuid.PcdSP805WatchdogBase
gArmPlatformTokenSpaceGuid.PcdSP805WatchdogClockFrequencyInHz
+ gArmPlatformTokenSpaceGuid.PcdSP805WatchdogInterrupt
[Protocols]
+ gHardwareInterruptProtocolGuid ## ALWAYS_CONSUMES
gEfiWatchdogTimerArchProtocolGuid ## ALWAYS_PRODUCES
[Depex]
- TRUE
+ gHardwareInterruptProtocolGuid
|