diff options
author | Evan Lloyd <evan.lloyd@arm.com> | 2016-06-15 13:52:41 +0100 |
---|---|---|
committer | Ard Biesheuvel <ard.biesheuvel@linaro.org> | 2016-06-15 16:15:50 +0200 |
commit | f63005282cc59f76b050c0be0813345cf7d54171 (patch) | |
tree | 1586901911d4f742016afa76ee405fe01bbf7c69 /ArmPlatformPkg/Include | |
parent | ca0aad698212bed2b65b4569cfeabcf7f0a7e88a (diff) | |
download | edk2-f63005282cc59f76b050c0be0813345cf7d54171.zip edk2-f63005282cc59f76b050c0be0813345cf7d54171.tar.gz edk2-f63005282cc59f76b050c0be0813345cf7d54171.tar.bz2 |
ArmPlatformPkg: Add support to configure PL011 UART clock
On some platforms the UART clock is not the same for all the serial
ports. The PL011 driver must be capable of handling serial ports with
different clock rates, so must not rely on a PCD for the clock rate.
This patch allows the UART clock rate to be passed as a parameter
to PL011UartInitializePort(), which is called from the serial port
library. This patch also contains the corresponding changes in the
serial port library.
The PCD in Drivers/PL011Uart is replaced by an extra parameter for
PL011UartInitializePort. The PCD is moved to Library/PL011SerialPortLib
to supply the value to pass.
A corresponding patch to ArmVirtPkg is included in the same bundle to
align that with these changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Diffstat (limited to 'ArmPlatformPkg/Include')
-rw-r--r-- | ArmPlatformPkg/Include/Drivers/PL011Uart.h | 17 |
1 files changed, 10 insertions, 7 deletions
diff --git a/ArmPlatformPkg/Include/Drivers/PL011Uart.h b/ArmPlatformPkg/Include/Drivers/PL011Uart.h index a4a6b4c..36ea9d6 100644 --- a/ArmPlatformPkg/Include/Drivers/PL011Uart.h +++ b/ArmPlatformPkg/Include/Drivers/PL011Uart.h @@ -89,26 +89,28 @@ #define PL011_UARTPID2_VER(X) (((X) >> 4) & 0xF)
#define PL011_VER_R1P4 0x2
-/*
+/**
Initialise the serial port to the specified settings.
All unspecified settings will be set to the default values.
- @param UartBase The base address of the serial device.
- @param BaudRate The baud rate of the serial device. If the
+ @param[in] UartBase The base address of the serial device.
+ @param[in] UartClkInHz The clock in Hz for the serial device.
+ Ignored if the PCD PL011UartInteger is not 0
+ @param[in out] BaudRate The baud rate of the serial device. If the
baud rate is not supported, the speed will be
reduced to the nearest supported one and the
variable's value will be updated accordingly.
- @param ReceiveFifoDepth The number of characters the device will
+ @param[in out] ReceiveFifoDepth The number of characters the device will
buffer on input. Value of 0 will use the
device's default FIFO depth.
- @param Parity If applicable, this is the EFI_PARITY_TYPE
+ @param[in out] Parity If applicable, this is the EFI_PARITY_TYPE
that is computed or checked as each character
is transmitted or received. If the device
does not support parity, the value is the
default parity value.
- @param DataBits The number of data bits in each character.
- @param StopBits If applicable, the EFI_STOP_BITS_TYPE number
+ @param[in out] DataBits The number of data bits in each character.
+ @param[in out] StopBits If applicable, the EFI_STOP_BITS_TYPE number
of stop bits per character.
If the device does not support stop bits, the
value is the default stop bit value.
@@ -123,6 +125,7 @@ RETURN_STATUS EFIAPI
PL011UartInitializePort (
IN UINTN UartBase,
+ IN UINT32 UartClkInHz,
IN OUT UINT64 *BaudRate,
IN OUT UINT32 *ReceiveFifoDepth,
IN OUT EFI_PARITY_TYPE *Parity,
|