ArmPlatformPkg: Added initial support for the FVP Base and Foundation Models

The FVP Base Model has GICv3 support.
UEFI SEC does limited configuration of GICv3 if present. This is required for Linux to use GICv3.
UEFI itself uses the GICv3 in legacy mode (GICv2).

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Olivier Martin <olivier.martin@arm.com>



git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14824 6f19259b-4bc3-4df7-8a09-765794883524

1 files changed, 327 insertions, 0 deletions

diff --git a/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf
new file mode 100644
index 0000000..7f62c24
--- /dev/null
+++ b/ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.fdf
@@ -0,0 +1,327 @@
+#

+#  Copyright (c) 2011 - 2013, ARM Limited. All rights reserved.

+#

+#  This program and the accompanying materials

+#  are licensed and made available under the terms and conditions of the BSD License

+#  which accompanies this distribution.  The full text of the license may be found at

+#  http://opensource.org/licenses/bsd-license.php

+#

+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,

+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

+#

+

+################################################################################

+#

+# FD Section

+# The [FD] Section is made up of the definition statements and a

+# description of what goes into  the Flash Device Image.  Each FD section

+# defines one flash "device" image.  A flash device image may be one of

+# the following: Removable media bootable image (like a boot floppy

+# image,) an Option ROM image (that would be "flashed" into an add-in

+# card,) a System "Flash"  image (that would be burned into a system's

+# flash) or an Update ("Capsule") image that will be used to update and

+# existing system flash.

+#

+################################################################################

+

+[FD.FVP_AARCH64_EFI_SEC]

+BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in SecureROM.

+Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).

+ErasePolarity = 1

+

+# This one is tricky, it must be: BlockSize * NumBlocks = Size

+BlockSize     = 0x00001000

+NumBlocks     = 0x4000

+

+################################################################################

+#

+# Following are lists of FD Region layout which correspond to the locations of different

+# images within the flash device.

+#

+# Regions must be defined in ascending order and may not overlap.

+#

+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by

+# the pipe "|" character, followed by the size of the region, also in hex with the leading

+# "0x" characters. Like:

+# Offset|Size

+# PcdOffsetCName|PcdSizeCName

+# RegionType <FV, DATA, or FILE>

+#

+################################################################################

+

+0x00000000|0x00080000

+gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize

+FV = FVMAIN_SEC

+

+[FD.FVP_AARCH64_EFI]

+BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in Flash0.

+Size          = 0x04000000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the device (64MiB).

+ErasePolarity = 1

+

+# This one is tricky, it must be: BlockSize * NumBlocks = Size

+BlockSize     = 0x00001000

+NumBlocks     = 0x4000

+

+0x00000000|0x00280000

+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize

+FV = FVMAIN_COMPACT

+

+################################################################################

+#

+# FV Section

+#

+# [FV] section is used to define what components or modules are placed within a flash

+# device file.  This section also defines order the components and modules are positioned

+# within the image.  The [FV] section consists of define statements, set statements and

+# module statements.

+#

+################################################################################

+

+[FV.FVMAIN_SEC]

+FvBaseAddress      = 0x0  # Secure ROM

+FvForceRebase      = TRUE

+FvAlignment        = 16

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  INF ArmPlatformPkg/Sec/Sec.inf

+

+

+[FV.FvMain]

+BlockSize          = 0x40

+NumBlocks          = 0         # This FV gets compressed so make it just big enough

+FvAlignment        = 16        # FV alignment and FV attributes setting.

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  INF MdeModulePkg/Core/Dxe/DxeMain.inf

+

+  #

+  # PI DXE Drivers producing Architectural Protocols (EFI Services)

+  #

+  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf

+  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf

+  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf

+  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf

+  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf

+  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf

+  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf

+  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf

+  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf

+  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

+

+  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf

+

+  #

+  # Multiple Console IO support

+  #

+  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf

+  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf

+  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf

+  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf

+  INF EmbeddedPkg/SerialDxe/SerialDxe.inf

+

+  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf

+  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf

+  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf

+!ifndef ARM_FOUNDATION_FVP

+  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf

+!endif

+  INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf

+

+  #

+  # Semi-hosting filesystem

+  #

+  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf

+

+  #

+  # FAT filesystem + GPT/MBR partitioning

+  #

+  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf

+  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf

+  INF FatBinPkg/EnhancedFatDxe/Fat.inf

+  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

+

+!ifndef ARM_FOUNDATION_FVP

+  #

+  # Multimedia Card Interface

+  #

+  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf

+  INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf

+!endif

+

+  #

+  # UEFI application (Shell Embedded Boot Loader)

+  #

+  INF ShellBinPkg/UefiShell/UefiShell.inf

+

+  #

+  # Bds

+  #

+  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf

+  INF ArmPlatformPkg/Bds/Bds.inf

+

+

+[FV.FVMAIN_COMPACT]

+FvAlignment        = 16

+ERASE_POLARITY     = 1

+MEMORY_MAPPED      = TRUE

+STICKY_WRITE       = TRUE

+LOCK_CAP           = TRUE

+LOCK_STATUS        = TRUE

+WRITE_DISABLED_CAP = TRUE

+WRITE_ENABLED_CAP  = TRUE

+WRITE_STATUS       = TRUE

+WRITE_LOCK_CAP     = TRUE

+WRITE_LOCK_STATUS  = TRUE

+READ_DISABLED_CAP  = TRUE

+READ_ENABLED_CAP   = TRUE

+READ_STATUS        = TRUE

+READ_LOCK_CAP      = TRUE

+READ_LOCK_STATUS   = TRUE

+

+  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf

+  INF MdeModulePkg/Core/Pei/PeiMain.inf

+  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf

+  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf

+  INF ArmPkg/Drivers/CpuPei/CpuPei.inf

+  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf

+  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf

+  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf

+  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf

+

+  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {

+    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {

+      SECTION FV_IMAGE = FVMAIN

+    }

+  }

+

+

+################################################################################

+#

+# Rules are use with the [FV] section's module INF type to define

+# how an FFS file is created for a given INF file. The following Rule are the default

+# rules for the different module type. User can add the customized rules to define the

+# content of the FFS file.

+#

+################################################################################

+

+

+############################################################################

+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #

+############################################################################

+#

+#[Rule.Common.DXE_DRIVER]

+#  FILE DRIVER = $(NAMED_GUID) {

+#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+#    COMPRESS PI_STD {

+#      GUIDED {

+#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+#        UI       STRING="$(MODULE_NAME)" Optional

+#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+#      }

+#    }

+#  }

+#

+############################################################################

+

+[Rule.Common.SEC]

+  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {

+    TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.PEI_CORE]

+  FILE PEI_CORE = $(NAMED_GUID) {

+    TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI     STRING ="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM]

+  FILE PEIM = $(NAMED_GUID) {

+     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex

+     TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi

+     UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.PEIM.TIANOCOMPRESSED]

+  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {

+    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex

+    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {

+      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi

+      UI        STRING="$(MODULE_NAME)" Optional

+    }

+  }

+

+[Rule.Common.DXE_CORE]

+  FILE DXE_CORE = $(NAMED_GUID) {

+    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI       STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.DXE_RUNTIME_DRIVER]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex

+    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi

+    UI           STRING="$(MODULE_NAME)" Optional

+  }

+

+[Rule.Common.UEFI_APPLICATION]

+  FILE APPLICATION = $(NAMED_GUID) {

+    UI     STRING ="$(MODULE_NAME)"     Optional

+    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi

+  }

+

+[Rule.Common.UEFI_DRIVER.BINARY]

+  FILE DRIVER = $(NAMED_GUID) {

+    DXE_DEPEX DXE_DEPEX Optional      |.depex

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }

+

+[Rule.Common.UEFI_APPLICATION.BINARY]

+  FILE APPLICATION = $(NAMED_GUID) {

+    PE32      PE32                    |.efi

+    UI        STRING="$(MODULE_NAME)" Optional

+    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)

+  }