edk2/BaseTools:

  Reference BaseTools source for gcc instructions & scripts.


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@4997 6f19259b-4bc3-4df7-8a09-765794883524

4 files changed, 15 insertions, 354 deletions

diff --git a/BaseTools/building-gcc.txt b/BaseTools/building-gcc.txt
new file mode 100644
index 0000000..886e2da
--- /dev/null
+++ b/BaseTools/building-gcc.txt
@@ -0,0 +1,15 @@
+To use GCC with the BaseTools project for edk2 based development purposes,
+you will need to build a GCC based cross-compiler (in addition to binutils).
+
+Instructions for building GCC for this purpose can be found under the
+BaseTools source tree.  (In addition to the instructions, you will also
+find scripts to help automate the build process.)
+
+If you do not have a tianocore.org account, you can make use of the 'guest'
+account with an empty password.
+
+In a web browser, you can 'browse' the relavent source at this location:
+ https://buildtools.tianocore.org/source/browse/buildtools/trunk/BaseTools/gcc
+
+Or, with subversion, you can download the relavent source with this command:
+ svn co https://buildtools.tianocore.org/svn/buildtools/trunk/BaseTools/gcc
diff --git a/BaseTools/gcc/README.txt b/BaseTools/gcc/README.txt
deleted file mode 100644
index 3b9428d..0000000
--- a/BaseTools/gcc/README.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-You may run these scripts to build a Tiano Cross compiler. They have been

-tested on Cygwin, OS X and Linux. You must modify these scripts to make them

-work on your system. You may need to install additional tools on your system to

-make the scripts work.

-

-You will need

-

-  A recent version (3.0 or later should be fine) of gcc that is able to produce

-    executables for the machine that you want to run this compiler on (the host

-    machine).

-  wget or curl

-  tar

-  bzip

-  gzip

-  bash

-  and possibly others

-

-CYGWIN Notes

-

-You should setup cygwin to use binmode on all mounts. When you initially

-install cygwin it gives you the choice of Unix file mode (recommended) or DOS

-file mode. Unix mode will cause all the cygwin directories to be mounted in

-binmode, while DOS will mount the dirs in textmode. Here is an example of a

-cygwin install where the dirs are (properly) mounted in binmode.

-

-C:\cygwin\bin on /usr/bin type user (binmode)

-C:\cygwin\lib on /usr/lib type user (binmode)

-c:\workspace on /workspace type system (binmode)

-C:\cygwin on / type user (binmode)

-

-If you use textmode, it is likely that the build will fail in a way that is

-hard to debug.

-

-Cygwin is pretty slow, so it is not recommended for large builds.

-

diff --git a/BaseTools/gcc/tianoCross-gcc-4.1 b/BaseTools/gcc/tianoCross-gcc-4.1
deleted file mode 100755
index d23ae16..0000000
--- a/BaseTools/gcc/tianoCross-gcc-4.1
+++ /dev/null
@@ -1,147 +0,0 @@
-#!/bin/bash
-
-#
-# Get, build and install the latest cross-development tools and libraries
-#
-
-###
-### CYGWIN :: Make sure that cygwin is mouting its file systems in binmode.
-###
-
-#
-# Specify the architectures for which the tools are to be built
-# To build for single target: ARCHS="m68k"
-#
-ARCHS="${ARCHS:-i386}"
-
-# Let's be nice
-renice 10 -p $$
-
-# If any thing goes wrong, we'll bail out.
-set -e
-
-#
-# Specify the versions
-#
-GCC=gcc-4.1.0
-BINUTILS=binutils-2.18
-CYGWIN_SNAP=20071108 # You may need to find a more recent version.
-export PATH=/bin:/usr/bin
-
-#
-# Where to install
-#
-PREFIX="${PREFIX:-/opt/tiano/}"
-
-#
-# Where to get the GNU tools
-#
-BINUTILS_URL=http://mirrors.kernel.org/gnu/binutils/${BINUTILS}.tar.bz2
-GCC_URL=http://mirrors.kernel.org/gnu/gcc/$GCC/$GCC.tar.bz2
-CYG_LOC=http://cygwin.com/snapshots/cygwin-src-${CYGWIN_SNAP}.tar.bz2
-
-# If your site uses proxy servers, un-comment the following lines
-# and change the server name to your site's proxy server and proxy port.
-# export http_proxy=http://proxyservername.mycompany.com:911
-# export ftp_proxy=http://proxyservername.mycompany.com:911
-
-#
-# Uncomment one of the following depending upon which your system provides
-#
-#GET_COMMAND="curl --remote-name"
-GET_COMMAND="wget -c -nc --no-directories --retr-symlinks "
-
-#
-# Allow environment to override some programs
-#
-MAKE="${MAKE:-make}"
-export MAKE
-SHELL="${SHELL:-/bin/sh}"
-export SHELL
-
-#
-# Get the source
-# If you don't have curl on your machine, try using
-#     wget --passive-ftp --no-directories --retr-symlinks <<url>>
-# If that doesn't work, try without the --passive-ftp option.
-#
-getSource() {
-    ${GET_COMMAND} "${BINUTILS_URL}" &
-    ${GET_COMMAND}  "${GCC_URL}" &
-    ${GET_COMMAND}  "${CYG_LOC}" &
-    wait
-}
-
-#
-# Unpack the source
-#
-unpackSource() {
-    (rm -rf "${BINUTILS}"
-    tar jxf "${BINUTILS}.tar.bz2"
-    ) &
-
-    (rm -rf "${GCC}"
-    tar jxf "${GCC}.tar.bz2"
-    ) &
-
-    (rm -rf cygwin-snapshot-${CYGWIN_SNAP}-1/
-    tar jxf cygwin-src-${CYGWIN_SNAP}.tar.bz2
-    ) &
-
-    wait
-}
-
-CONF_SHELL="${CONF_SHELL:-/bin/bash}"
-# CONF_SHELL="${CONF_SHELL:-echo}"
-
-#
-# Build
-#
-build() {
-    for arch in $ARCHS
-    do (
-        export targ=${arch}-tiano-pe
-        export pref=${PREFIX}${targ}
-        export PATH="${pref}/bin:$PATH"
-
-        ( mkdir -p build-binutils-$targ
-        cd build-binutils-$targ
-        "${CONF_SHELL}" "../${BINUTILS}/configure" \
-            --disable-nls "--target=${targ}" "--prefix=${pref}"
-        ${MAKE} -j1 -w all
-        ${MAKE} -w install
-        ) >> ${targ}.log 2>&1 &&
-
-        (
-            mkdir -p $pref/$targ/sys-include;
-            cp -fr cygwin-snapshot-${CYGWIN_SNAP}-1/newlib/libc/include/* $pref/$targ/sys-include
-            cp -fr cygwin-snapshot-${CYGWIN_SNAP}-1/winsup/cygwin/include/* $pref/$targ/sys-include
-        ) &&
-
-        ( mkdir -p build-gcc-$targ
-        cd build-gcc-$targ
-        "${CONF_SHELL}" "../${GCC}/configure" "--target=${targ}" "--prefix=${pref}" \
-            --with-gnu-as --with-gnu-ld --with-newlib --verbose \
-            --disable-libssp \
-            --disable-nls --enable-languages=c
-        ${MAKE} -j1 -w all
-        ${MAKE} -w install 
-        ) >> ${targ}.log 2>&1
-    ) &
-    done
-
-    wait
-}
-
-
-
-#
-# Do everything
-#
-# Comment out any activities you wish to omit
-#
-getSource
-unpackSource
-build
-
-
diff --git a/BaseTools/gcc/x86_64-mingw-gcc-build b/BaseTools/gcc/x86_64-mingw-gcc-build
deleted file mode 100755
index 74ac870..0000000
--- a/BaseTools/gcc/x86_64-mingw-gcc-build
+++ /dev/null
@@ -1,172 +0,0 @@
-#!/bin/bash
-
-#
-# Build a mingw64 compiler for doing x64 compiles.
-#
-
-###
-### CYGWIN :: Make sure that cygwin is mouting its file systems in binmode.
-###
-
-#
-# Specify the architectures for which the tools are to be built
-#
-TARGS="${TARGS:-x86_64-pc-mingw32}"
-
-# Let's be nice
-renice 10 -p $$
-
-# If any thing goes wrong, we'll bail out.
-set -e
-
-#
-# Specify the versions
-#
-GCC_VERSION=4.3-20071207
-BINUTILS_VERSION=2.17.50.0.18
-MINGW_HEADERS_VERSION=20070802
-
-_GCC_=gcc-${GCC_VERSION}
-_BINUTILS_=binutils-${BINUTILS_VERSION}
-_MINGW_HEADERS_=mingw-w64-headers-${MINGW_HEADERS_VERSION}
-
-export PATH=/bin:/usr/bin:/usr/local/bin
-
-#
-# Where to install
-#
-PREFIX="${PREFIX:-/opt/tiano/}"
-
-#
-# Where to get the GNU tools
-#
-BINUTILS_URL=http://www.kernel.org/pub/linux/devel/binutils/${_BINUTILS_}.tar.bz2
-GCC_URL=ftp://gd.tuwien.ac.at/gnu/gcc/snapshots/${GCC_VERSION}/${_GCC_}.tar.bz2
-MINGW_HEADERS_URL=http://superb-west.dl.sourceforge.net/sourceforge/mingw/${_MINGW_HEADERS_}.tar.bz2
-
-#
-# If your site uses proxy servers, un-comment the following lines
-# and change the server name to your site's proxy server and proxy port.
-# export http_proxy=http://proxyservername.mycompany.com:911
-# export ftp_proxy=http://proxyservername.mycompany.com:911
-
-#
-# Uncomment one of the following depending upon which your system provides
-#
-#GET_COMMAND="curl --remote-name"
-GET_COMMAND="wget -c -nc --no-directories --retr-symlinks "
-
-#
-# Allow environment to override some programs
-#
-MAKE="${MAKE:-make}"
-export MAKE
-SHELL="${SHELL:-/bin/sh}"
-export SHELL
-
-#
-# Get the source
-# If you don't have curl on your machine, try using
-#     wget --passive-ftp --no-directories --retr-symlinks <<url>>
-# If that doesn't work, try without the --passive-ftp option.
-#
-getSource() {
-    ${GET_COMMAND}  "${BINUTILS_URL}"
-    ${GET_COMMAND}  "${GCC_URL}"
-    ${GET_COMMAND}  "${MINGW_HEADERS_URL}"
-    wait
-}
-
-#
-# Unpack the source
-#
-unpackSource() {
-    (rm -rf "${_BINUTILS_}"
-    tar jxf "${_BINUTILS_}.tar.bz2"
-    )
-
-    (rm -rf "${_GCC_}"
-    tar jxf "${_GCC_}.tar.bz2"
-    )
-
-    (rm -rf "include"
-    tar jxf "${_MINGW_HEADERS_}.tar.bz2"
-    )
-
-    wait
-}
-
-CONF_SHELL="${CONF_SHELL:-/bin/bash}"
-# CONF_SHELL="${CONF_SHELL:-echo}"
-
-#
-# Build
-#
-build() {
-    for targ in $TARGS
-    do (
-        export pref=${PREFIX}${targ}
-        export PATH="${pref}/bin:$PATH"
-        rm -f ${targ}.log
-
-        (
-	    rm -rf build-binutils-$targ
-	    mkdir -p build-binutils-$targ
-            cd build-binutils-$targ
-            "${CONF_SHELL}" "../${_BINUTILS_}/configure" \
-                --disable-nls "--target=${targ}" "--prefix=${pref}"
-            ${MAKE} -j1 -w all
-            ${MAKE} -w install
-        ) >> ${targ}.log 2>&1 
-
-        (
-            mkdir -p $pref/$targ/include;
-	    cp -fr include/* $pref/$targ/include
-	    ln -s $pref/$targ $pref/mingw
-	    ln -s $pref/$targ/include $pref/$targ/sys-include
-        ) 
-
-
-        (
-	    rm -rf build-gcc-$targ
-	    mkdir -p build-gcc-$targ
-            cd build-gcc-$targ
-            "${CONF_SHELL}" "../${_GCC_}/configure" "--target=${targ}" \
-	        "--prefix=${pref}" \
-	        --without-headers --with-newlib --verbose \
-                --disable-libssp --disable-nls --enable-languages=c
-            ${MAKE} -j1 -w all
-            ${MAKE} -w install
-        ) >> ${targ}.log 2>&1
-
-        # GCC 4.3 needs the symbol links for the gcc and binutils. Otherwise
-	# the cc1 and as, ld etc can not be found by gcc.
-	(
-	    rm -f $pref/$targ/bin/*
-	    ln -s $pref/bin/$targ-ar $pref/$targ/bin/ar
-	    ln -s $pref/bin/$targ-as $pref/$targ/bin/as
-	    ln -s $pref/bin/$targ-dlltool $pref/$targ/bin/dlltool
-	    ln -s $pref/bin/$targ-gcc $pref/$targ/bin/gcc
-	    ln -s $pref/bin/$targ-ld $pref/$targ/bin/ld
-	    ln -s $pref/bin/$targ-nm $pref/$targ/bin/nm
-	    ln -s $pref/bin/$targ-objcopy $pref/$targ/bin/objcopy
-	    ln -s $pref/bin/$targ-objdump $pref/$targ/bin/objdump
-	    ln -s $pref/bin/$targ-ranlib $pref/$targ/bin/ranlib
-	    ln -s $pref/bin/$targ-strip $pref/$targ/bin/strip
-	)
-    )
-    done
-
-    wait
-}
-
-
-
-#
-# Do everything
-#
-# Comment out any activities you wish to omit
-#
-getSource
-unpackSource
-build