diff options
author | oliviermartin <oliviermartin@6f19259b-4bc3-4df7-8a09-765794883524> | 2011-08-18 10:14:33 +0000 |
---|---|---|
committer | oliviermartin <oliviermartin@6f19259b-4bc3-4df7-8a09-765794883524> | 2011-08-18 10:14:33 +0000 |
commit | 2dde40b1ff1ab66cb5233bcc334b1555a0027735 (patch) | |
tree | 50d40ccd1aff22102e6f67ec56b48df38bb8149d | |
parent | 9e4a626c06f506475b1852ca38f1d03c120b4803 (diff) | |
download | edk2-2dde40b1ff1ab66cb5233bcc334b1555a0027735.zip edk2-2dde40b1ff1ab66cb5233bcc334b1555a0027735.tar.gz edk2-2dde40b1ff1ab66cb5233bcc334b1555a0027735.tar.bz2 |
ArmPlatformPkg/SP804TimerLib: Fix delay functions to be reentrant
In the previous implementation, if the MicroSecondDelay or NanoSecondDelay
were called while a delay function was already running, the timer HW controller
was reinitialized with the new settings and it was discarding the settings
of the first called delay function.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12163 6f19259b-4bc3-4df7-8a09-765794883524
-rw-r--r-- | ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c | 121 |
1 files changed, 92 insertions, 29 deletions
diff --git a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c b/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c index da37dfa..fcaa23e 100644 --- a/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c +++ b/ArmPlatformPkg/Library/SP804TimerLib/SP804TimerLib.c @@ -1,6 +1,7 @@ /** @file Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR> + Copyright (c) 2011, ARM Limited. All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License @@ -36,13 +37,10 @@ TimerConstructor ( if (MmioRead32(SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG) & SP804_TIMER_CTRL_ENABLE) { return RETURN_SUCCESS; } else { - // Configure the Metronome Timer for one shot operation, 32 bits, no prescaler, and interrupt disabled - MmioOr32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1); + // Configure the Metronome Timer for free running operation, 32 bits, no prescaler, and interrupt disabled + MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1); - // Preload the timer count register - MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_LOAD_REG, 1); - - // Enable the timer + // Start the Metronome Timer ticking MmioOr32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE); } @@ -51,7 +49,7 @@ TimerConstructor ( return RETURN_SUCCESS; } else { // Configure the Performance timer for free running operation, 32 bits, no prescaler, interrupt disabled - MmioOr32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1); + MmioWrite32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1); // Start the Performance Timer ticking MmioOr32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE); @@ -64,6 +62,26 @@ TimerConstructor ( Stalls the CPU for at least the given number of microseconds. Stalls the CPU for the number of microseconds specified by MicroSeconds. + The hardware timer is 32 bits. + The maximum possible delay is (0xFFFFFFFF / TimerFrequencyMHz), i.e. ([32bits] / FreqInMHz) + For example: + +----------------+------------+----------+----------+ + | TimerFrequency | MaxDelay | MaxDelay | MaxDelay | + | (MHz) | (us) | (s) | (min) | + +----------------+------------+----------+----------+ + | 1 | 0xFFFFFFFF | 4294 | 71.5 | + | 5 | 0x33333333 | 859 | 14.3 | + | 10 | 0x19999999 | 429 | 7.2 | + | 50 | 0x051EB851 | 86 | 1.4 | + +----------------+------------+----------+----------+ + If it becomes necessary to support higher delays, then consider using the + real time clock. + + During this delay, the cpu is not yielded to any other process, with one exception: + events that are triggered off a timer and which execute at a higher TPL than + this function. These events may call MicroSecondDelay (or NanoSecondDelay) to + fulfil their own needs. + Therefore, this function must be re-entrant, as it may be interrupted and re-started. @param MicroSeconds The minimum number of microseconds to delay. @@ -76,16 +94,68 @@ MicroSecondDelay ( IN UINTN MicroSeconds ) { - UINTN Index; + UINT64 DelayTicks64; // Convert from microseconds to timer ticks, more bits to detect over-range conditions. + UINTN DelayTicks; // Convert from microseconds to timer ticks, native size for general calculations. + UINTN StartTicks; // Timer value snapshot at the start of the delay + UINTN TargetTicks; // Timer value to signal the end of the delay + UINTN CurrentTicks; // Current value of the 64-bit timer value at any given moment + + // If we snapshot the timer at the start of the delay function then we minimise unaccounted overheads. + StartTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG); + + // We are operating at the limit of 32bits. For the range checking work in 64 bits to avoid overflows. + DelayTicks64 = MultU64x32((UINT64)MicroSeconds, PcdGet32(PcdSP804TimerFrequencyInMHz)); + + // We are limited to 32 bits. + // If the specified delay is exactly equal to the max range of the timer, + // then the start will be equal to the stop plus one timer overflow (wrap-around). + // To avoid having to check for that, reduce the maximum acceptable range by 1 tick, + // i.e. reject delays equal or greater than the max range of the timer. + if (DelayTicks64 >= (UINT64)SP804_MAX_TICKS) { + DEBUG((EFI_D_ERROR,"MicroSecondDelay: ERROR: MicroSeconds=%d exceed SP804 count range. Max MicroSeconds=%d\n", + MicroSeconds, + ((UINTN)SP804_MAX_TICKS/PcdGet32(PcdSP804TimerFrequencyInMHz)))); + } + ASSERT(DelayTicks64 < (UINT64)SP804_MAX_TICKS); + + // From now on do calculations only in native bit size. + DelayTicks = (UINTN)DelayTicks64; + + // Calculate the target value of the timer. + + //Note: SP804 timer is counting down + if (StartTicks >= DelayTicks) { + // In this case we do not expect a wrap-around of the timer to occur. + // CurrentTicks must be less than StartTicks and higher than TargetTicks. + // If this is not the case, then the delay has been reached and may even have been exceeded if this + // function was suspended by a higher priority interrupt. - // Reload the counter for each 1Mhz to avoid an overflow in the load value - for (Index = 0; Index < (UINTN)PcdGet32(PcdSP804TimerFrequencyInMHz); Index++) { - // load the timer count register - MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_LOAD_REG, MicroSeconds); + TargetTicks = StartTicks - DelayTicks; - while (MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG) > 0) { - ; - } + do { + CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG); + } while ((CurrentTicks > TargetTicks) && (CurrentTicks <= StartTicks)); + + } else { + // In this case TargetTicks is larger than StartTicks. + // This means we expect a wrap-around of the timer to occur and we must wait for it. + // Before the wrap-around, CurrentTicks must be less than StartTicks and less than TargetTicks. + // After the wrap-around, CurrentTicks must be larger than StartTicks and larger than TargetTicks. + // If this is not the case, then the delay has been reached and may even have been exceeded if this + // function was suspended by a higher priority interrupt. + + // The order of operations is essential to avoid arithmetic overflow problems + TargetTicks = ((UINTN)SP804_MAX_TICKS - DelayTicks) + StartTicks; + + // First wait for the wrap-around to occur + do { + CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG); + } while (CurrentTicks <= StartTicks); + + // Then wait for the target + do { + CurrentTicks = MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG); + } while (CurrentTicks > TargetTicks); } return MicroSeconds; @@ -96,6 +166,9 @@ MicroSecondDelay ( Stalls the CPU for the number of nanoseconds specified by NanoSeconds. + When the timer frequency is 1MHz, each tick corresponds to 1 microsecond. + Therefore, the nanosecond delay will be rounded up to the nearest 1 microsecond. + @param NanoSeconds The minimum number of nanoseconds to delay. @return The value of NanoSeconds inputted. @@ -107,23 +180,14 @@ NanoSecondDelay ( IN UINTN NanoSeconds ) { - UINTN Index; - UINT32 MicroSeconds; + UINTN MicroSeconds; // Round up to 1us Tick Number - MicroSeconds = (UINT32)NanoSeconds / 1000; - MicroSeconds += ((UINT32)NanoSeconds % 1000) == 0 ? 0 : 1; + MicroSeconds = NanoSeconds / 1000; + MicroSeconds += ((NanoSeconds % 1000) == 0) ? 0 : 1; - // Reload the counter for each 1Mhz to avoid an overflow in the load value - for (Index = 0; Index < (UINTN)PcdGet32(PcdSP804TimerFrequencyInMHz); Index++) { - // load the timer count register - MmioWrite32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_LOAD_REG, MicroSeconds); + MicroSecondDelay (MicroSeconds); - while (MmioRead32 (SP804_TIMER_METRONOME_BASE + SP804_TIMER_CURRENT_REG) > 0) { - ; - } - } - return NanoSeconds; } @@ -148,7 +212,6 @@ GetPerformanceCounter ( // Don't think we need this to boot, just to do performance profile UINT64 Value; Value = MmioRead32 (SP804_TIMER_PERFORMANCE_BASE + SP804_TIMER_CURRENT_REG); - ASSERT(Value > 0); return Value; } |