1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
|
/*
* Arm PrimeCell PL011 UART
*
* Copyright (c) 2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
/*
* QEMU interface:
* + sysbus MMIO region 0: device registers
* + sysbus IRQ 0: UARTINTR (combined interrupt line)
* + sysbus IRQ 1: UARTRXINTR (receive FIFO interrupt line)
* + sysbus IRQ 2: UARTTXINTR (transmit FIFO interrupt line)
* + sysbus IRQ 3: UARTRTINTR (receive timeout interrupt line)
* + sysbus IRQ 4: UARTMSINTR (momem status interrupt line)
* + sysbus IRQ 5: UARTEINTR (error interrupt line)
*/
#include "qemu/osdep.h"
#include "hw/char/pl011.h"
#include "hw/irq.h"
#include "hw/sysbus.h"
#include "hw/qdev-clock.h"
#include "hw/qdev-properties-system.h"
#include "migration/vmstate.h"
#include "chardev/char-fe.h"
#include "chardev/char-serial.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
#define PL011_INT_TX 0x20
#define PL011_INT_RX 0x10
#define PL011_FLAG_TXFE 0x80
#define PL011_FLAG_RXFF 0x40
#define PL011_FLAG_TXFF 0x20
#define PL011_FLAG_RXFE 0x10
/* Interrupt status bits in UARTRIS, UARTMIS, UARTIMSC */
#define INT_OE (1 << 10)
#define INT_BE (1 << 9)
#define INT_PE (1 << 8)
#define INT_FE (1 << 7)
#define INT_RT (1 << 6)
#define INT_TX (1 << 5)
#define INT_RX (1 << 4)
#define INT_DSR (1 << 3)
#define INT_DCD (1 << 2)
#define INT_CTS (1 << 1)
#define INT_RI (1 << 0)
#define INT_E (INT_OE | INT_BE | INT_PE | INT_FE)
#define INT_MS (INT_RI | INT_DSR | INT_DCD | INT_CTS)
static const unsigned char pl011_id_arm[8] =
{ 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
static const unsigned char pl011_id_luminary[8] =
{ 0x11, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
/* Which bits in the interrupt status matter for each outbound IRQ line ? */
static const uint32_t irqmask[] = {
INT_E | INT_MS | INT_RT | INT_TX | INT_RX, /* combined IRQ */
INT_RX,
INT_TX,
INT_RT,
INT_MS,
INT_E,
};
static void pl011_update(PL011State *s)
{
uint32_t flags;
int i;
flags = s->int_level & s->int_enabled;
trace_pl011_irq_state(flags != 0);
for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
qemu_set_irq(s->irq[i], (flags & irqmask[i]) != 0);
}
}
static bool pl011_is_fifo_enabled(PL011State *s)
{
return (s->lcr & 0x10) != 0;
}
static inline unsigned pl011_get_fifo_depth(PL011State *s)
{
/* Note: FIFO depth is expected to be power-of-2 */
return pl011_is_fifo_enabled(s) ? PL011_FIFO_DEPTH : 1;
}
static uint64_t pl011_read(void *opaque, hwaddr offset,
unsigned size)
{
PL011State *s = (PL011State *)opaque;
uint32_t c;
uint64_t r;
switch (offset >> 2) {
case 0: /* UARTDR */
s->flags &= ~PL011_FLAG_RXFF;
c = s->read_fifo[s->read_pos];
if (s->read_count > 0) {
s->read_count--;
s->read_pos = (s->read_pos + 1) & (pl011_get_fifo_depth(s) - 1);
}
if (s->read_count == 0) {
s->flags |= PL011_FLAG_RXFE;
}
if (s->read_count == s->read_trigger - 1)
s->int_level &= ~ PL011_INT_RX;
trace_pl011_read_fifo(s->read_count);
s->rsr = c >> 8;
pl011_update(s);
qemu_chr_fe_accept_input(&s->chr);
r = c;
break;
case 1: /* UARTRSR */
r = s->rsr;
break;
case 6: /* UARTFR */
r = s->flags;
break;
case 8: /* UARTILPR */
r = s->ilpr;
break;
case 9: /* UARTIBRD */
r = s->ibrd;
break;
case 10: /* UARTFBRD */
r = s->fbrd;
break;
case 11: /* UARTLCR_H */
r = s->lcr;
break;
case 12: /* UARTCR */
r = s->cr;
break;
case 13: /* UARTIFLS */
r = s->ifl;
break;
case 14: /* UARTIMSC */
r = s->int_enabled;
break;
case 15: /* UARTRIS */
r = s->int_level;
break;
case 16: /* UARTMIS */
r = s->int_level & s->int_enabled;
break;
case 18: /* UARTDMACR */
r = s->dmacr;
break;
case 0x3f8 ... 0x400:
r = s->id[(offset - 0xfe0) >> 2];
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pl011_read: Bad offset 0x%x\n", (int)offset);
r = 0;
break;
}
trace_pl011_read(offset, r);
return r;
}
static void pl011_set_read_trigger(PL011State *s)
{
#if 0
/* The docs say the RX interrupt is triggered when the FIFO exceeds
the threshold. However linux only reads the FIFO in response to an
interrupt. Triggering the interrupt when the FIFO is non-empty seems
to make things work. */
if (s->lcr & 0x10)
s->read_trigger = (s->ifl >> 1) & 0x1c;
else
#endif
s->read_trigger = 1;
}
static unsigned int pl011_get_baudrate(const PL011State *s)
{
uint64_t clk;
if (s->ibrd == 0) {
return 0;
}
clk = clock_get_hz(s->clk);
return (clk / ((s->ibrd << 6) + s->fbrd)) << 2;
}
static void pl011_trace_baudrate_change(const PL011State *s)
{
trace_pl011_baudrate_change(pl011_get_baudrate(s),
clock_get_hz(s->clk),
s->ibrd, s->fbrd);
}
static void pl011_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
PL011State *s = (PL011State *)opaque;
unsigned char ch;
trace_pl011_write(offset, value);
switch (offset >> 2) {
case 0: /* UARTDR */
/* ??? Check if transmitter is enabled. */
ch = value;
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &ch, 1);
s->int_level |= PL011_INT_TX;
pl011_update(s);
break;
case 1: /* UARTRSR/UARTECR */
s->rsr = 0;
break;
case 6: /* UARTFR */
/* Writes to Flag register are ignored. */
break;
case 8: /* UARTUARTILPR */
s->ilpr = value;
break;
case 9: /* UARTIBRD */
s->ibrd = value;
pl011_trace_baudrate_change(s);
break;
case 10: /* UARTFBRD */
s->fbrd = value;
pl011_trace_baudrate_change(s);
break;
case 11: /* UARTLCR_H */
/* Reset the FIFO state on FIFO enable or disable */
if ((s->lcr ^ value) & 0x10) {
s->read_count = 0;
s->read_pos = 0;
}
if ((s->lcr ^ value) & 0x1) {
int break_enable = value & 0x1;
qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
&break_enable);
}
s->lcr = value;
pl011_set_read_trigger(s);
break;
case 12: /* UARTCR */
/* ??? Need to implement the enable and loopback bits. */
s->cr = value;
break;
case 13: /* UARTIFS */
s->ifl = value;
pl011_set_read_trigger(s);
break;
case 14: /* UARTIMSC */
s->int_enabled = value;
pl011_update(s);
break;
case 17: /* UARTICR */
s->int_level &= ~value;
pl011_update(s);
break;
case 18: /* UARTDMACR */
s->dmacr = value;
if (value & 3) {
qemu_log_mask(LOG_UNIMP, "pl011: DMA not implemented\n");
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pl011_write: Bad offset 0x%x\n", (int)offset);
}
}
static int pl011_can_receive(void *opaque)
{
PL011State *s = (PL011State *)opaque;
int r;
r = s->read_count < pl011_get_fifo_depth(s);
trace_pl011_can_receive(s->lcr, s->read_count, r);
return r;
}
static void pl011_put_fifo(void *opaque, uint32_t value)
{
PL011State *s = (PL011State *)opaque;
int slot;
unsigned pipe_depth;
pipe_depth = pl011_get_fifo_depth(s);
slot = (s->read_pos + s->read_count) & (pipe_depth - 1);
s->read_fifo[slot] = value;
s->read_count++;
s->flags &= ~PL011_FLAG_RXFE;
trace_pl011_put_fifo(value, s->read_count);
if (s->read_count == pipe_depth) {
trace_pl011_put_fifo_full();
s->flags |= PL011_FLAG_RXFF;
}
if (s->read_count == s->read_trigger) {
s->int_level |= PL011_INT_RX;
pl011_update(s);
}
}
static void pl011_receive(void *opaque, const uint8_t *buf, int size)
{
pl011_put_fifo(opaque, *buf);
}
static void pl011_event(void *opaque, QEMUChrEvent event)
{
if (event == CHR_EVENT_BREAK)
pl011_put_fifo(opaque, 0x400);
}
static void pl011_clock_update(void *opaque, ClockEvent event)
{
PL011State *s = PL011(opaque);
pl011_trace_baudrate_change(s);
}
static const MemoryRegionOps pl011_ops = {
.read = pl011_read,
.write = pl011_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static bool pl011_clock_needed(void *opaque)
{
PL011State *s = PL011(opaque);
return s->migrate_clk;
}
static const VMStateDescription vmstate_pl011_clock = {
.name = "pl011/clock",
.version_id = 1,
.minimum_version_id = 1,
.needed = pl011_clock_needed,
.fields = (VMStateField[]) {
VMSTATE_CLOCK(clk, PL011State),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_pl011 = {
.name = "pl011",
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_UINT32(readbuff, PL011State),
VMSTATE_UINT32(flags, PL011State),
VMSTATE_UINT32(lcr, PL011State),
VMSTATE_UINT32(rsr, PL011State),
VMSTATE_UINT32(cr, PL011State),
VMSTATE_UINT32(dmacr, PL011State),
VMSTATE_UINT32(int_enabled, PL011State),
VMSTATE_UINT32(int_level, PL011State),
VMSTATE_UINT32_ARRAY(read_fifo, PL011State, PL011_FIFO_DEPTH),
VMSTATE_UINT32(ilpr, PL011State),
VMSTATE_UINT32(ibrd, PL011State),
VMSTATE_UINT32(fbrd, PL011State),
VMSTATE_UINT32(ifl, PL011State),
VMSTATE_INT32(read_pos, PL011State),
VMSTATE_INT32(read_count, PL011State),
VMSTATE_INT32(read_trigger, PL011State),
VMSTATE_END_OF_LIST()
},
.subsections = (const VMStateDescription * []) {
&vmstate_pl011_clock,
NULL
}
};
static Property pl011_properties[] = {
DEFINE_PROP_CHR("chardev", PL011State, chr),
DEFINE_PROP_BOOL("migrate-clk", PL011State, migrate_clk, true),
DEFINE_PROP_END_OF_LIST(),
};
static void pl011_init(Object *obj)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
PL011State *s = PL011(obj);
int i;
memory_region_init_io(&s->iomem, OBJECT(s), &pl011_ops, s, "pl011", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
sysbus_init_irq(sbd, &s->irq[i]);
}
s->clk = qdev_init_clock_in(DEVICE(obj), "clk", pl011_clock_update, s,
ClockUpdate);
s->read_trigger = 1;
s->ifl = 0x12;
s->cr = 0x300;
s->flags = 0x90;
s->id = pl011_id_arm;
}
static void pl011_realize(DeviceState *dev, Error **errp)
{
PL011State *s = PL011(dev);
qemu_chr_fe_set_handlers(&s->chr, pl011_can_receive, pl011_receive,
pl011_event, NULL, s, NULL, true);
}
static void pl011_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
dc->realize = pl011_realize;
dc->vmsd = &vmstate_pl011;
device_class_set_props(dc, pl011_properties);
}
static const TypeInfo pl011_arm_info = {
.name = TYPE_PL011,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PL011State),
.instance_init = pl011_init,
.class_init = pl011_class_init,
};
static void pl011_luminary_init(Object *obj)
{
PL011State *s = PL011(obj);
s->id = pl011_id_luminary;
}
static const TypeInfo pl011_luminary_info = {
.name = TYPE_PL011_LUMINARY,
.parent = TYPE_PL011,
.instance_init = pl011_luminary_init,
};
static void pl011_register_types(void)
{
type_register_static(&pl011_arm_info);
type_register_static(&pl011_luminary_info);
}
type_init(pl011_register_types)
|