aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)AuthorFilesLines
2016-09-23target-mips: generate fencesLeon Alrae1-2/+30
Make use of memory barrier TCG opcode in MIPS front end. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-09-23target-mips: add 24KEc CPU definitionAndré Draszik1-0/+22
Define a new CPU definition supporting 24KEc cores, similar to the existing 24Kc, but with added support for DSP instructions and MIPS16e (and without FPU). Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-09-16tcg: Merge GETPC and GETRARichard Henderson1-9/+9
The return address argument to the softmmu template helpers was confused. In the legacy case, we wanted to indicate that there is no return address, and so passed in NULL. However, we then immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero value, indicating the presence of an (invalid) return address. Push the GETPC_ADJ subtraction down to the only point it's required: immediately before use within cpu_restore_state_from_tb, after all NULL pointer checks have been completed. This makes GETPC and GETRA identical. Remove GETRA as the lesser used macro, replacing all uses with GETPC. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-28target-mips: fix EntryHi.EHINV being cleared on TLB exceptionLeon Alrae1-0/+1
While implementing TLB invalidation feature we forgot to modify part of code responsible for updating EntryHi during TLB exception. Consequently EntryHi.EHINV is unexpectedly cleared on the exception. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-21kvm-irqchip: i386: add hook for add/remove virqPeter Xu1-0/+11
Adding two hooks to be notified when adding/removing msi routes. There are two kinds of MSI routes: - in kvm_irqchip_add_irq_route(): before assigning IRQFD. Used by vhost, vfio, etc. - in kvm_irqchip_send_msi(): when sending direct MSI message, if direct MSI not allowed, we will first create one MSI route entry in the kernel, then trigger it. This patch only hooks the first one (irqfd case). We do not need to take care for the 2nd one, since it's only used by QEMU userspace (kvm-apic) and the messages will always do in-time translation when triggered. While we need to note them down for the 1st one, so that we can notify the kernel when cache invalidation happens. Also, we do not hook IOAPIC msi routes (we have explicit notifier for IOAPIC to keep its cache updated). We only need to care about irqfd users. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster2-6/+6
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12target-*: Clean up cpu.h header guardsMarkus Armbruster1-3/+3
Most of them use guard symbols like CPU_$target_H, but we also have __MIPS_CPU_H__ and __TRICORE_CPU_H__. They all upset scripts/clean-header-guards.pl. The script dislikes CPU_$target_H because they don't match their file name (they should, to make guard collisions less likely). The others are reserved identifiers. Clean them all up: use guard symbol $target_CPU_H for target-$target/cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12Fix confusing argument names in some common functionsSergey Sorokin2-6/+7
There are functions tlb_fill(), cpu_unaligned_access() and do_unaligned_access() that are called with access type and mmu index arguments. But these arguments are named 'is_write' and 'is_user' in their declarations. The patches fix the arguments to avoid a confusion. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 1465907177-1399402-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12target-mips: enable 10-bit ASIDs in I6400 CPULeon Alrae1-1/+1
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: support CP0.Config4.AE bitPaul Burton2-1/+3
The read-only Config4.AE bit set denotes extended 10 bits ASID. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: change ASID type to hold more than 8 bitsPaul Burton4-12/+12
ASID currently has uint8_t type which is too small since some processors support more than 8 bits ASID. Therefore change its type to uint16_t. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: add ASID mask field and replace magic valuesPaul Burton4-17/+23
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: replace MIPS64R6-generic with the real I6400 CPU modelLeon Alrae1-11/+9
MIPS64R6-generic gradually gets closer to I6400 CPU, feature-wise. Rename it to make it clear which MIPS processor it is supposed to emulate. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: add exception base to MIPS CPULeon Alrae3-4/+13
Replace hardcoded 0xbfc00000 with exception_base which is initialized with this default address so there is no functional change here. However, it is now exposed and consequently it will be possible to modify it from outside of the CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-29Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-2/+0
* serial port fixes (Paolo) * Q35 modeling improvements (Paolo, Vasily) * chardev cleanup improvements (Marc-André) * iscsi bugfix (Peter L.) * cpu_exec patch from multi-arch patches (Peter C.) * pci-assign tweak (Lin Ma) # gpg: Signature made Wed 29 Jun 2016 15:56:30 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) socket: unlink unix socket on remove socket: add listen feature char: clean up remaining chardevs when leaving vhost-user: disable chardev handlers on close vhost-user-test: fix g_cond_wait_until compat implementation vl: smp_parse: fix regression ich9: implement SCI_IRQ_SEL register ich9: implement ACPI_EN register serial: reinstate watch after migration serial: remove watch on reset char: change qemu_chr_fe_add_watch to return unsigned serial: separate serial_xmit and serial_watch_cb serial: simplify tsr_retry reset serial: make tsr_retry unsigned iscsi: fix assertion in is_sector_request_lun_aligned target-*: Don't redefine cpu_exec() pci-assign: Move "Invalid ROM" error message to pci-assign-load-rom.c vnc: generalize "VNC server running on ..." message scsi: esp: fix migration MC146818 RTC: add GPIO access to output IRQ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-29target-*: Don't redefine cpu_exec()Peter Crosthwaite1-2/+0
This function needs to be converted to QOM hook and virtualised for multi-arch. This rename interferes, as cpu-qom will not have access to the renaming causing name divergence. This rename doesn't really do anything anyway so just delete it. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-Id: <69bd25a8678b8b31b91cd9760c777bed1aafb44e.1437212383.git.crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaitepeter@gmail.com>
2016-06-24target-mips: Add FCR31's FS bit definitionAleksandar Markovic1-1/+2
Add preprocessor definition of FCR31's FS bit, and update related code for setting this bit. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24target-mips: Implement FCR31's R/W bitmask and related functionalitiesAleksandar Markovic5-19/+42
This patch implements read and write access rules for Mips floating point control and status register (FCR31). The change can be divided into following parts: - Add fields that will keep FCR31's R/W bitmask in procesor definitions and processor float_status structure. - Add appropriate value for FCR31's R/W bitmask for each supported processor. - Add function for setting snan_bit_is_one, and integrate it in appropriate places. - Modify handling of CTC1 (case 31) instruction to use FCR31's R/W bitmask. - Modify handling user mode executables for Mips, in relation to the bit EF_MIPS_NAN2008 from ELF header, that is in turn related to reading and writing to FCR31. - Modify gdb behavior in relation to FCR31. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24target-mips: Add nan2008 flavor of <CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D>Aleksandar Markovic3-48/+461
New set of helpers for handling nan2008-syle versions of instructions <CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D>, for Mips R6. All involved instructions have float operand and integer result. Their core functionality is implemented via invocations of appropriate SoftFloat functions. The problematic cases are when the operand is a NaN, and also when the operand (float) is out of the range of the result. Here one can distinguish three cases: CASE MIPS-A: (FCR31.NAN2008 == 1) 1. Operand is a NaN, result should be 0; 2. Operand is larger than INT_MAX, result should be INT_MAX; 3. Operand is smaller than INT_MIN, result should be INT_MIN. CASE MIPS-B: (FCR31.NAN2008 == 0) 1. Operand is a NaN, result should be INT_MAX; 2. Operand is larger than INT_MAX, result should be INT_MAX; 3. Operand is smaller than INT_MIN, result should be INT_MAX. CASE SoftFloat: 1. Operand is a NaN, result is INT_MAX; 2. Operand is larger than INT_MAX, result is INT_MAX; 3. Operand is smaller than INT_MIN, result is INT_MIN. Current implementation of <CEIL|CVT|FLOOR|ROUND|TRUNC>.<L|W>.<S|D> implements case MIPS-B. This patch relates to case MIPS-A. For case MIPS-A, only return value for NaN-operands should be corrected after appropriate SoftFloat library function is called. Related MSA instructions FTRUNC_S and FTINT_S already handle well all cases, in the fashion similar to the code from this patch. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: * removed a statement from the description which caused slight confusion] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24target-mips: Add abs2008 flavor of <ABS|NEG>.<S|D>Aleksandar Markovic1-4/+22
Updated handling of instructions <ABS|NEG>.<S|D>. Note that legacy (pre-abs2008) ABS and NEG instructions are arithmetic (and, therefore, any NaN operand causes signaling invalid operation), while abs2008 ones are non-arithmetic, always and only changing the sign bit, even for NaN-like operands. Details on these instructions are documented in [1] p. 35 and 359. Implementation-wise, abs2008 versions are implemented without helpers, for simplicity and performance sake. [1] "MIPS Architecture For Programmers Volume II-A: The MIPS64 Instruction Set Reference Manual", Imagination Technologies LTD, Revision 6.04, November 13, 2015 Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24target-mips: Activate IEEE 754-2008 signaling NaN bit meaning for MSAAleksandar Markovic1-1/+2
Function msa_reset() is updated so that flag snan_bit_is_one is properly set to 0. By applying this patch, a number of incorrect MSA behaviors that require IEEE 754-2008 compliance will be fixed. Those are behaviors that (up to the moment of applying this patch) did not get the desired functionality from SoftFloat library with respect to distinguishing between quiet and signaling NaN, getting default NaN values (both quiet and signaling), establishing if a floating point number is NaN or not, etc. Two examples: * FMAX, FMIN will now correctly detect and propagate NaNs. * FCLASS.D ans FCLASS.S will now correcty detect NaN flavors. Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24softfloat: Implement run-time-configurable meaning of signaling NaN bitAleksandar Markovic6-50/+71
This patch modifies SoftFloat library so that it can be configured in run-time in relation to the meaning of signaling NaN bit, while, at the same time, strictly preserving its behavior on all existing platforms. Background: In floating-point calculations, there is a need for denoting undefined or unrepresentable values. This is achieved by defining certain floating-point numerical values to be NaNs (which stands for "not a number"). For additional reasons, virtually all modern floating-point unit implementations use two kinds of NaNs: quiet and signaling. The binary representations of these two kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally, the first bit of mantissa). Up to 2008, standards for floating-point did not specify all details about binary representation of NaNs. More specifically, the meaning of the bit that is used for distinguishing between signaling and quiet NaNs was not strictly prescribed. (IEEE 754-2008 was the first floating-point standard that defined that meaning clearly, see [1], p. 35) As a result, different platforms took different approaches, and that presented considerable challenge for multi-platform emulators like QEMU. Mips platform represents the most complex case among QEMU-supported platforms regarding signaling NaN bit. Up to the Release 6 of Mips architecture, "1" in signaling NaN bit denoted signaling NaN, which is opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of that, Mips architecture for SIMD (also known as MSA, or vector instructions) also specifies signaling bit in accordance to IEEE standard. MSA unit can be implemented with both pre-Release 6 and Release 6 main processor units. QEMU uses SoftFloat library to implement various floating-point-related instructions on all platforms. The current QEMU implementation allows for defining meaning of signaling NaN bit during build time, and is implemented via preprocessor macro called SNAN_BIT_IS_ONE. On the other hand, the change in this patch enables SoftFloat library to be configured in run-time. This configuration is meant to occur during CPU initialization, at the moment when it is definitely known what desired behavior for particular CPU (or any additional FPUs) is. The change is implemented so that it is consistent with existing implementation of similar cases. This means that structure float_status is used for passing the information about desired signaling NaN bit on each invocation of SoftFloat functions. The additional field in float_status is called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE. IMPORTANT: This change is not meant to create any change in emulator behavior or functionality on any platform. It just provides the means for SoftFloat library to be used in a more flexible way - in other words, it will just prepare SoftFloat library for usage related to Mips platform and its specifics regarding signaling bit meaning, which is done in some of subsequent patches from this series. Further break down of changes: 1) Added field snan_bit_is_one to the structure float_status, and correspondent setter function set_snan_bit_is_one(). 2) Constants <float16|float32|float64|floatx80|float128>_default_nan (used both internally and externally) converted to functions <float16|float32|float64|floatx80|float128>_default_nan(float_status*). This is necessary since they are dependent on signaling bit meaning. At the same time, for the sake of code cleanup and simplicity, constants <floatx80|float128>_default_nan_<low|high> (used only internally within SoftFloat library) are removed, as not needed. 3) Added a float_status* argument to SoftFloat library functions XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_), XXX_maybe_silence_nan(XXX a_). This argument must be present in order to enable correct invocation of new version of functions XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128> here) 4) Updated code for all platforms to reflect changes in SoftFloat library. This change is twofolds: it includes modifications of SoftFloat library functions invocations, and an addition of invocation of function set_snan_bit_is_one() during CPU initialization, with arguments that are appropriate for each particular platform. It was established that all platforms zero their main CPU data structures, so snan_bit_is_one(0) in appropriate places is not added, as it is not needed. [1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer Society, August 29, 2008. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Tested-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [leon.alrae@imgtec.com: * cherry-picked 2 chunks from patch #2 to fix compilation warnings] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell1-0/+1
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost1-3/+1
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-20exec: [tcg] Track which vCPU is performing translation and executionLluís Vilanova1-0/+1
Information is tracked inside the TCGContext structure, and later used by tracing events with the 'tcg' and 'vcpu' properties. The 'cpu' field is used to check tracing of translation-time events ("*_trans"). The 'tcg_env' field is used to pass it to execution-time events ("*_exec"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini1-1/+0
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-05target-*: dfilter support for in_asmRichard Henderson1-1/+2
The arm target was handled by 06486077, but other targets were ignored. This handles all the rest which actually support disassembly (that is, skipping moxie and tilegx). Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini7-2/+6
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19mips: move CP0 functions out of cpu.hPaolo Bonzini2-109/+112
These are here for historical reasons: they are needed from both gdbstub.c and op_helper.c, and the latter was compiled with fixed AREG0. It is not needed anymore, so uninline them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini5-17/+23
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19hw: move CPU state serialization to migration/cpu.hPaolo Bonzini1-1/+1
Remove usage of NEED_CPU_H from hw/hw.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19target-mips: make cpu-qom.h not target specificPaolo Bonzini2-37/+38
Make MIPSCPU an opaque type within cpu-qom.h, and move all definitions of private methods, as well as all type definitions that require knowledge of the layout to cpu.h. This helps making files independent of NEED_CPU_H if they only need to pass around CPU pointers. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18Fix some typos found by codespellStefan Weil1-1/+1
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-13Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160513' into stagingPeter Maydell1-1/+1
MIPS patches 2016-05-13 Changes: * fix zeroing CP0.WatchLo registers in soft reset * QOMify Jazz led # gpg: Signature made Fri 13 May 2016 11:04:04 BST using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160513: hw/display: QOM'ify jazz_led.c target-mips: fix call to memset in soft reset code Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12tcg: Allow goto_tb to any target PC in user modeSergey Fedorov1-5/+15
In user mode, there's only a static address translation, TBs are always invalidated properly and direct jumps are reset when mapping change. Thus the destination address is always valid for direct jumps and there's no need to restrict it to the pages the TB resides in. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tb: consistently use uint32_t for tb->flagsEmilio G. Cota1-1/+1
We are inconsistent with the type of tb->flags: usage varies loosely between int and uint64_t. Settle to uint32_t everywhere, which is superior to both: at least one target (aarch64) uses the most significant bit in the u32, and uint64_t is wasteful. Compile-tested for all targets. Suggested-by: Laurent Desnogues <laurent.desnogues@gmail.com> Suggested-by: Richard Henderson <rth@twiddle.net> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-Id: <1460049562-23517-1-git-send-email-cota@braap.org>
2016-05-12target-mips: fix call to memset in soft reset codeAurelien Jarno1-1/+1
Recent versions of GCC report the following error when compiling target-mips/helper.c: qemu/target-mips/helper.c:542:9: warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] This is indeed correct and due to a wrong usage of sizeof(). Fix that. Cc: Stefan Weil <sw@weilnetz.de> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: qemu-stable@nongnu.org LP: https://bugs.launchpad.net/qemu/+bug/1577841 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-04-28target-mips: Fix RDHWR exception host PCJames Hogan1-8/+8
Commit b00c72180c36 ("target-mips: add PC, XNP reg numbers to RDHWR") changed the rdhwr helpers to use check_hwrena() to check the register being accessed is enabled in CP0_HWREna when used from user mode. If that check fails an EXCP_RI exception is raised at the host PC calculated with GETPC(). However check_hwrena() may not be fully inlined as the do_raise_exception() part of it is common regardless of the arguments. This causes GETPC() to calculate the address in the call in the helper instead of the generated code calling the helper. No TB will be found and the EPC reported with the resulting guest RI exception points to the beginning of the TB instead of the RDHWR instruction. We can't reliably force check_hwrena() to be inlined, and converting it to a macro would be ugly, so instead pass the host PC in as an argument, with each rdhwr helper passing GETPC(). This should avoid any dependence on compiler behaviour, and in practice seems to ensure the full inlining of check_hwrena() on x86_64. This issue causes failures when running a MIPS KVM (trap & emulate) guest in a MIPS QEMU TCG guest, as the inner guest kernel will do a RDHWR of counter, which is disabled in the outer guest's CP0_HWREna by KVM so it can emulate the inner guest's counter. The emulation fails and the RI exception is passed to the inner guest. Fixes: b00c72180c36 ("target-mips: add PC, XNP reg numbers to RDHWR") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Yongbok Kim <yongbok.kim@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: add MAAR, MAARI registerYongbok Kim6-3/+113
The MAAR register is a read/write register included in Release 5 of the architecture that defines the accessibility attributes of physical address regions. In particular, MAAR defines whether an instruction fetch or data load can speculatively access a memory region within the physical address bounds specified by MAAR. As QEMU doesn't do speculative access, hence this patch only provides ability to access the registers. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: use CP0_CHECK for gen_m{f|t}hc0Yongbok Kim1-25/+21
Reuse CP0_CHECK macro for gen_m{f|t}hc0. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: make ITC Configuration Tags accessible to the CPULeon Alrae4-12/+100
Add CP0.ErrCtl register with WST, SPR and ITC bits. In 34K and interAptiv processors these bits are used to enable CACHE instruction access to different arrays. When WST=0, SPR=0 and ITC=1 the CACHE instruction will access ITC tag values. Generally we do not model caches and we have been treating the CACHE instruction as NOP. But since CACHE can operate on ITC Tags new MIPS_HFLAG_ITC_CACHE hflag is introduced to generate the helper only when CACHE is in the ITC Access mode. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: check CP0 enabled for CACHE instruction also in R6Leon Alrae1-0/+1
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips: implement ITC Configuration Tags and Storage CellsLeon Alrae1-0/+1
Implement ITC as a single object consisting of two memory regions: 1) tag_io: ITC Configuration Tags (i.e. ITCAddressMap{0,1} registers) which are accessible by the CPU via CACHE instruction. Also adding MemoryRegion *itc_tag to the CPUMIPSState so that CACHE instruction will dispatch reads/writes directly. 2) storage_io: memory-mapped ITC Storage whose address space is configurable (i.e. enabled/remapped/resized) by writing to ITCAddressMap{0,1} registers. ITC Storage contains FIFO and Semaphore cells. Read-only FIFO bit in the ITC cell tag indicates the type of the cell. If the ITC Storage contains both types of cells then FIFOs are located before Semaphores. Since issuing thread can get blocked on the access to a cell (in E/F Synchronized and P/V Synchronized Views) each cell has a bitmap to track which threads are currently blocked. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: enable CM GCR in MIPS64R6-generic CPULeon Alrae1-1/+2
Indicate that in the MIPS64R6-generic CPU the memory-mapped Global Configuration Register Space is implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30hw/mips_malta: add CPS to Malta boardLeon Alrae2-0/+11
If the user specifies smp > 1 and the CPU with CM GCR support, then create Coherent Processing System (which takes care of instantiating CPUs) rather than CPUs directly and connect i8259 and cbus to the pins exposed by CPS. However, there is no GIC yet, thus CPS exposes CPU's IRQ pins so use the same pin numbers as before. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: add CMGCRBase registerYongbok Kim2-1/+20
Physical base address for the memory-mapped Coherency Manager Global Configuration Register space. The MIPS default location for the GCR_BASE address is 0x1FBF_8. This register only exists if Config3 CMGCR is set to one. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: move CMGCR enabling to a separate patch] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-24Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+1
* Log filtering from Alex and Peter * Chardev fix from Marc-André * config.status tweak from David * Header file tweaks from Markus, myself and Veronia (Outreachy candidate) * get_ticks_per_sec() removal from Rutuja (Outreachy candidate) * Coverity fix from myself * PKE implementation from myself, based on rth's XSAVE support # gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (28 commits) target-i386: implement PKE for TCG config.status: Pass extra parameters char: translate from QIOChannel error to errno exec: fix error handling in file_ram_alloc cputlb: modernise the debug support qemu-log: support simple pid substitution for logs target-arm: dfilter support for in_asm qemu-log: dfilter-ise exec, out_asm, op and opt_op qemu-log: new option -dfilter to limit output qemu-log: Improve the "exec" TB execution logging qemu-log: Avoid function call for disabled qemu_log_mask logging qemu-log: correct help text for -d cpu tcg: pass down TranslationBlock to tcg_code_gen util: move declarations out of qemu-common.h Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND hw: explicitly include qemu-common.h and cpu.h include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h Move ParallelIOArg from qemu-common.h to sysemu/char.h Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: scripts/clean-includes
2016-03-23target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUsLeon Alrae3-9/+17
MIPS Release 6 and MIPS SIMD Architecture make it mandatory to have IEEE 754-2008 FPU which is indicated by CP1 FIR.HAS2008, FCSR.ABS2008 and FCSR.NAN2008 bits set to 1. In QEMU we still keep these bits cleared as there is no 2008-NaN support. However, this now causes problems preventing from running R6 Linux with the v4.5 kernel. Kernel refuses to execute 2008-NaN ELFs on a CPU whose FPU does not support 2008-NaN encoding: (...) VFS: Mounted root (ext4 filesystem) readonly on device 8:0. devtmpfs: mounted Freeing unused kernel memory: 256K (ffffffff806f0000 - ffffffff80730000) request_module: runaway loop modprobe binfmt-464c Starting init: /sbin/init exists but couldn't execute it (error -8) request_module: runaway loop modprobe binfmt-464c Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Therefore always indicate presence of 2008-NaN support in R6 as well as in R5+MSA CPUs, even though this feature is not yet supported by MIPS in QEMU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01tcg: Add type for vCPU pointersLluís Vilanova1-1/+1
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-11-02 22:25:33 +0000