| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make the code common to all accelerators: after seeing cpu->exit_request
set to true, accelerator code needs to reach qemu_process_cpu_events_common().
So for the common cases where they use qemu_process_cpu_events(), go ahead and
clear it in there. Note that the cheap qatomic_set() is enough because
at this point the thread has taken the BQL; qatomic_set_mb() is not needed.
In particular, this is the ordering of the communication between
I/O and vCPU threads is always the same.
In the I/O thread:
(a) store other memory locations that will be checked if cpu->exit_request
or cpu->interrupt_request is 1 (for example cpu->stop or cpu->work_list
for cpu->exit_request)
(b) cpu_exit(): store-release cpu->exit_request, or
(b) cpu_interrupt(): store-release cpu->interrupt_request
>>> at this point, cpu->halt_cond is broadcast and the BQL released
(c) do the accelerator-specific kick (e.g. write icount_decr for TCG,
pthread_kill for KVM, etc.)
In the vCPU thread instead the opposite order is respected:
(c) the accelerator's execution loop exits thanks to the kick
(b) then the inner execution loop checks cpu->interrupt_request
and cpu->exit_request. If needed cpu->interrupt_request is
converted into cpu->exit_request when work is needed outside
the execution loop.
(a) then the other memory locations are checked. Some may need to
be read under the BQL, but the vCPU thread may also take other
locks (e.g. for queued work items) or none at all.
qatomic_set_mb() would only be needed if the halt sleep was done
outside the BQL (though in that case, cpu->exit_request probably
would be replaced by a QemuEvent or something like that).
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do so before extending it to the user-mode emulators, where there is no
such thing as an "I/O thread".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that cpu_exit() actually kicks all accelerators, use it whenever
the message to another thread is processed in qemu_wait_io_event().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Writes to interrupt_request used non-atomic accesses, but there are a
few cases where the access was not protected by the BQL. Now that
there is a full set of helpers, it's easier to guarantee that
interrupt_request accesses are fully atomic, so just drop the
requirement instead of fixing them.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The helpers form load-acquire/store-release pair and ensure
that appropriate barriers are in place in case checks happen
outside of BQL.
Use them to replace open-coded checkers/setters across the code,
to make sure that barriers are not missed. Helpers also make code a
bit more readable.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821155603.2422553-1-imammedo@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unfortunately "system/accel-ops.h" handlers are not only
system-specific. For example, the cpu_reset_hold() hook
is part of the vCPU creation, after it is realized.
Mechanical rename to drop 'system' using:
$ sed -i -e s_system/accel-ops.h_accel/accel-cpu-ops.h_g \
$(git grep -l system/accel-ops.h)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250703173248.44995-38-philmd@linaro.org>
|
|
Accelerators call pre_resume() once. Since it isn't a method to
call for each vCPU, move it from AccelOpsClass to AccelClass.
Adapt WHPX.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250702185332.43650-21-philmd@linaro.org>
|
|
In order to dispatch over AccelOpsClass::handle_interrupt(),
we need it always defined, not calling a hidden handler under
the hood. Make AccelOpsClass::handle_interrupt() mandatory.
Expose generic_handle_interrupt() prototype and register it
for each accelerator.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Mads Ynddal <mads@ynddal.dk>
Message-Id: <20250703173248.44995-29-philmd@linaro.org>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20250703173248.44995-5-philmd@linaro.org>
|
|
This patch adds the new VM state change cb type `VMChangeStateHandlerWithRet`,
which has return value for `VMChangeStateEntry`.
Thus, we can register a new VM state change cb with return value for device.
Note that `VMChangeStateHandler` and `VMChangeStateHandlerWithRet` are mutually
exclusive and cannot be provided at the same time.
This patch is the pre patch for 'vhost-user: return failure if backend crashes
when live migration', which makes the live migration aware of the loss of
connection with the vhost-user backend and aborts the live migration.
Virtio device will use VMChangeStateHandlerWithRet.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Message-Id: <20250416024729.3289157-2-haoqian.he@smartx.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The heavily imported "system/cpus.h" header includes "accel-ops.h"
to get AccelOpsClass type declaration. Reduce headers pressure by
forward declaring it in "qemu/typedefs.h", where we already
declare the AccelCPUState type.
Reduce "system/cpus.h" inclusions by only including
"system/accel-ops.h" when necessary.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250123234415.59850-14-philmd@linaro.org>
|
|
There is no user of it now, remove it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/r/20241219110125.1266461-9-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
|
|
Right now, the stub BQL in stubs/iothread-lock.c always reports itself as
unlocked. However, Rust would like to run its tests in an environment where
the BQL *is* locked. Provide an extremely dirty function that flips the
return value of bql_is_locked() to true.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Big QEMU Lock (BQL) is used to provide interior mutability to Rust
code. While BqlCell performs indivisible accesses, an equivalent of
RefCell will allow the borrower to hold to the interior content for a
long time. If the BQL is dropped, another thread could come and mutate
the data from C code (Rust code would panic on borrow_mut() instead).
In order to prevent this, add a new BQL primitive that can mark
BQL-atomic sections and aborts if the BQL is dropped within them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes higher-half address parsing for QMP commands
`[p]memsave`.
Signed-off-by: Josh Junon <junon@oro.sh>
Message-ID: <20240802140704.13591-1-junon@oro.sh>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Subject tweaked, and one PRId64 updated to PRIu64]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This factors the CPU pause function from pause_all_vcpus() into a
new cpu_pause() function, similarly to cpu_resume(). cpu_resume()
is moved to keep it next to cpu_pause().
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240712120247.477133-17-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
We are about to remove direct calls to individual accelerators for
this information and will need a central point for plugins to hook
into time changes.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
|
|
qmp_memsave() and qmp_pmemsave() report fwrite() error as
An IO error has occurred
Improve this to
writing memory to '<filename>' failed
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Define the vm_resume helper, for use in subsequent patches.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Currently, a vm in the suspended state is not completely stopped. The VCPUs
have been paused, but the cpu clock still runs, and runstate notifiers for
the transition to stopped have not been called. This causes problems for
live migration. Stale cpu timers_state is saved to the migration stream,
causing time errors in the guest when it wakes from suspend, and state that
would have been modified by runstate notifiers is wrong.
Modify vm_stop to completely stop the vm if the current state is suspended,
transition to RUN_STATE_PAUSED, and remember that the machine was suspended.
Modify vm_start to restore the suspended state.
This affects all callers of vm_stop and vm_start, notably, the qapi stop and
cont commands:
old behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_SUSPENDED
new behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_PAUSED
RUN_STATE_PAUSED --> cont --> RUN_STATE_SUSPENDED
For example:
(qemu) info status
VM status: paused (suspended)
(qemu) stop
(qemu) info status
VM status: paused
(qemu) system_wakeup
Error: Unable to wake up: guest is not in suspended state
(qemu) cont
(qemu) info status
VM status: paused (suspended)
(qemu) system_wakeup
(qemu) info status
VM status: running
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Add a state variable to remember if a vm previously transitioned into a
suspended state.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
From CPUState.nr_cores' comment, it represents "number of cores within
this CPU package".
After 003f230e37d7 ("machine: Tweak the order of topology members in
struct CpuTopology"), the meaning of smp.cores changed to "the number of
cores in one die", but this commit missed to change CPUState.nr_cores'
calculation, so that CPUState.nr_cores became wrong and now it
misses to consider numbers of clusters and dies.
At present, only i386 is using CPUState.nr_cores.
But as for i386, which supports die level, the uses of CPUState.nr_cores
are very confusing:
Early uses are based on the meaning of "cores per package" (before die
is introduced into i386), and later uses are based on "cores per die"
(after die's introduction).
This difference is due to that commit a94e1428991f ("target/i386: Add
CPUID.1F generation support for multi-dies PCMachine") misunderstood
that CPUState.nr_cores means "cores per die" when calculated
CPUID.1FH.01H:EBX. After that, the changes in i386 all followed this
wrong understanding.
With the influence of 003f230e37d7 and a94e1428991f, for i386 currently
the result of CPUState.nr_cores is "cores per die", thus the original
uses of CPUState.cores based on the meaning of "cores per package" are
wrong when multiple dies exist:
1. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.01H:EBX[bits 23:16] is
incorrect because it expects "cpus per package" but now the
result is "cpus per die".
2. In cpu_x86_cpuid() of target/i386/cpu.c, for all leaves of CPUID.04H:
EAX[bits 31:26] is incorrect because they expect "cpus per package"
but now the result is "cpus per die". The error not only impacts the
EAX calculation in cache_info_passthrough case, but also impacts other
cases of setting cache topology for Intel CPU according to cpu
topology (specifically, the incoming parameter "num_cores" expects
"cores per package" in encode_cache_cpuid4()).
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.0BH.01H:EBX[bits
15:00] is incorrect because the EBX of 0BH.01H (core level) expects
"cpus per package", which may be different with 1FH.01H (The reason
is 1FH can support more levels. For QEMU, 1FH also supports die,
1FH.01H:EBX[bits 15:00] expects "cpus per die").
4. In cpu_x86_cpuid() of target/i386/cpu.c, when CPUID.80000001H is
calculated, here "cpus per package" is expected to be checked, but in
fact, now it checks "cpus per die". Though "cpus per die" also works
for this code logic, this isn't consistent with AMD's APM.
5. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.80000008H:ECX expects
"cpus per package" but it obtains "cpus per die".
6. In simulate_rdmsr() of target/i386/hvf/x86_emu.c, in
kvm_rdmsr_core_thread_count() of target/i386/kvm/kvm.c, and in
helper_rdmsr() of target/i386/tcg/sysemu/misc_helper.c,
MSR_CORE_THREAD_COUNT expects "cpus per package" and "cores per
package", but in these functions, it obtains "cpus per die" and
"cores per die".
On the other hand, these uses are correct now (they are added in/after
a94e1428991f):
1. In cpu_x86_cpuid() of target/i386/cpu.c, topo_info.cores_per_die
meets the actual meaning of CPUState.nr_cores ("cores per die").
2. In cpu_x86_cpuid() of target/i386/cpu.c, vcpus_per_socket (in CPUID.
04H's calculation) considers number of dies, so it's correct.
3. In cpu_x86_cpuid() of target/i386/cpu.c, CPUID.1FH.01H:EBX[bits
15:00] needs "cpus per die" and it gets the correct result, and
CPUID.1FH.02H:EBX[bits 15:00] gets correct "cpus per package".
When CPUState.nr_cores is correctly changed to "cores per package" again
, the above errors will be fixed without extra work, but the "currently"
correct cases will go wrong and need special handling to pass correct
"cpus/cores per die" they want.
Fix CPUState.nr_cores' calculation to fit the original meaning "cores
per package", as well as changing calculation of topo_info.cores_per_die,
vcpus_per_socket and CPUID.1FH.
Fixes: a94e1428991f ("target/i386: Add CPUID.1F generation support for multi-dies PCMachine")
Fixes: 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology")
Signed-off-by: Zhuocheng Ding <zhuocheng.ding@intel.com>
Co-developed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231024090323.1859210-4-zhao1.liu@linux.intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Introduce cpu_exec_reset_hold() which call an accelerator
specific AccelOpsClass::cpu_reset_hold() handler.
Define a stub on TCG user emulation, because CPU reset is
irrelevant there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-3-philmd@linaro.org>
|
|
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
