aboutsummaryrefslogtreecommitdiff
path: root/stubs
AgeCommit message (Collapse)AuthorFilesLines
2025-05-28qapi: make s390x specific CPU commands unconditionally availableDaniel P. Berrangé2-0/+23
This removes the TARGET_S390X and CONFIG_KVM conditions from the CPU commands that are conceptually specific to s390x. Top level stubs are provided to cope with non-s390x targets, or builds without KVM. The removal of CONFIG_KVM is justified by the fact there is no conceptual difference between running 'qemu-system-s390x -accel tcg' on a build with and without KVM built-in, so apps only using TCG can't rely on the CONFIG_KVM in the schema. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-11-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: make most CPU commands unconditionally availableDaniel P. Berrangé3-0/+46
This removes the TARGET_* conditions from all the CPU commands that are conceptually target independent. Top level stubs are provided to cope with targets which do not currently implement all of the commands. Adjust the doc comments accordingly. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-10-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: make Xen event commands unconditionally availableDaniel P. Berrangé2-0/+17
This removes the TARGET_I386 condition from the Xen event channel commands, moving them to the recently introduced misc-i386.json QAPI file, given they are inherantly i386 specific commands. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-7-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: make SGX commands unconditionally availableDaniel P. Berrangé2-0/+18
This removes the TARGET_I386 condition from the SGX confidential virtualization commands, moving them to the recently introduced misc-i386.json QAPI file, given they are inherantly i386 specific commands. Observe a pre-existing bug that the "SGXEPCSection" struct lacked a TARGET_I386 condition, despite its only usage being behind a TARGET_I386 condition. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-6-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: expose query-gic-capability command unconditionallyDaniel P. Berrangé2-0/+13
This removes the TARGET_ARM condition from the query-gic-capability command. This requires providing a QMP command stub for non-ARM targets. This in turn requires moving the command out of misc-target.json, since that will trigger symbol poisoning errors when built from target independent code. Following the earlier precedent, this creates a misc-arm.json file to hold this ARM specific command. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-5-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: make SEV commands unconditionally availableDaniel P. Berrangé2-0/+37
This removes the TARGET_I386 condition from the SEV confidential virtualization commands, moving them to the recently introduced misc-i386.json QAPI file, given they are inherantly i386 specific commands. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-4-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-05-28qapi: expose rtc-reset-reinjection command unconditionallyDaniel P. Berrangé2-0/+13
This removes the TARGET_I386 condition from the rtc-reset-reinjection command. This requires providing a QMP command stub for non-i386 target. This in turn requires moving the command out of misc-target.json, since that will trigger symbol poisoning errors when built from target independent code. Rather than putting the command into misc.json, it is proposed to create misc-$TARGET.json files to hold commands whose impl is conceptually only applicable to a single target. This gives an obvious docs hint to consumers that the command is only useful in relation a specific target, while misc.json is for commands applicable to 2 or more targets. The current impl of qmp_rtc_reset_reinject() is a no-op if the i386 RTC is disabled in Kconfig, or if the running machine type lack any RTC device. The stub impl for non-i386 targets retains this no-op behaviour. However, it is now reporting an Error mentioning this command is not available for current target. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-ID: <20250522190542.588267-2-pierrick.bouvier@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2025-04-23include/exec: Split out icount.hRichard Henderson1-1/+1
Split icount stuff from system/cpu-timers.h. There are 17 files which only require icount.h, 7 that only require cpu-timers.h, and 7 that require both. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2025-04-23include/system: Move exec/memory.h to system/memory.hRichard Henderson1-1/+1
Convert the existing includes with sed -i ,exec/memory.h,system/memory.h,g Move the include within cpu-all.h into a !CONFIG_USER_ONLY block. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2025-02-25stub: Remove monitor-fd.cIlya Leoshkevich2-10/+1
Both monitor-fd.c and monitor-internal.c contain a stub for monitor_get_fd(), which causes a duplicate symbol linker error when linking rust-qemu-api-integration. Use monitor-internal.c instead of monitor-fd.c and remove the latter. Reported-by: Zhao Liu <zhao1.liu@intel.com> Suggested-by: Zhao Liu <zhao1.liu@intel.com> Fixes: fccb744f41c6 ("gdbstub: Try unlinking the unix socket before binding") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Link: https://lore.kernel.org/r/20250217104900.230122-1-iii@linux.ibm.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-10Merge tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of ↵Stefan Hajnoczi2-0/+11
https://gitlab.com/stsquad/qemu into staging testing and gdbstub updates: - add a check-rust test to docker builds - re-factor the qtest logic to be cleaner - fix tests to not clock_step when no timers enabled - roll-up log prefix into qtest_send - cleaner error reporting when qtest_clock_set fails - revert old deadlock fix now tests are updated - only run full set of migration tests under HW acceleration - support late attachment to user-mode gdbstubs # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmeqBSsACgkQ+9DbCVqe # KkQS/Af+K0hpdGc1msiuMsqmuESBvhoQniYZFLN1/pwe2KpG8i/+fq2fsCuxJhJ1 # 2TzPH7aj54p9MGCZf2k9JLhO22XldN+oezZMc1crhoWK0AtrWhnLs58I2oEPIsUo # NmGO6Zfm98ge89o2y8GCvd0QXAtUf+jduDKnW0mfnOnw+w/mky5KzWS7/1091VGW # 42LSY4KnqgdLSqLyuLBOrgADEjB1ChWS4/bSC+kEYSGrmNQB+n1KeIzzlJBGpOr0 # Z9yzmhMCm7TWdkFNPmnVfYH/7ZUNcpv6PtQSpkku4f6b/gybyvJBknHpM4i+Gpb5 # 87wSjljrCpdNm/9KFRjiJuUWdS/jCg== # =UF0n # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Feb 2025 08:54:51 EST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * tag 'pull-10.0-testing-and-gdstub-updates-100225-1' of https://gitlab.com/stsquad/qemu: tests/tcg: Add late gdbstub attach test docs/user: Document the %d placeholder and suspend=n QEMU_GDB features gdbstub: Allow late attachment osdep: Introduce qemu_kill_thread() user: Introduce host_interrupt_signal user: Introduce user/signal.h gdbstub: Try unlinking the unix socket before binding gdbstub: Allow the %d placeholder in the socket path tests/qtest/migration: Pick smoke tests tests/qtest/migration: Add --full option Revert "util/timer: avoid deadlock when shutting down" tests/qtest: tighten up the checks on clock_step tests/qtest: rename qtest_send_prefix and roll-up into qtest_send tests/qtest: simplify qtest_process_inbuf tests/qtest: don't step clock at start of npcm7xx periodic IRQ test tests/qtest: don't attempt to clock_step while waiting for virtio ISR tests/docker: replicate the check-rust-tools-nightly CI job Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2025-02-10qapi: Move and rename qapi/qmp/dispatch.h to qapi/qmp-registry.hDaniel P. Berrangé2-2/+2
The general expectation is that header files should follow the same file/path naming scheme as the corresponding source file. There are various historical exceptions to this practice in QEMU, with one of the most notable being the include/qapi/qmp/ directory. include/qapi/qmp/dispatch.h corresponds mostly to qapi/qmp-registry.c. Move and rename it to include/qapi/qmp-registry.h. Now just qerror.h is left in include/qapi/qmp/. Since it's deprecated & (slowly) getting eliminated anyway, it isn't worth moving. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20241118151235.2665921-3-armbru@redhat.com>
2025-02-10gdbstub: Try unlinking the unix socket before bindingIlya Leoshkevich2-0/+11
In case an emulated process execve()s another emulated process, bind() will fail, because the socket already exists. So try deleting it. Use the existing unix_listen() function which does this. Link qemu-user with qemu-sockets.c and add the monitor_get_fd() stub. Note that it is not possible to handle this in do_execv(): deleting gdbserver_user_state.socket_path before safe_execve() is not correct, because the latter may fail, and afterwards we may lose control. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20250117001542.8290-3-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20250207153112.3939799-12-alex.bennee@linaro.org>
2025-01-30Merge tag 'migration-20250129-pull-request' of ↵Stefan Hajnoczi1-0/+7
https://gitlab.com/farosas/qemu into staging Migration pull request - Purge of ram_save_target_page_legacy - Cleanups to postcopy, json writer, migration states - New migration mode cpr-transfer - Fix for a -Werror=maybe-uninitialized instance in savevm # -----BEGIN PGP SIGNATURE----- # # iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmeaT8EQHGZhcm9zYXNA # c3VzZS5kZQAKCRDHmNx0G+wxndXrEACTT+rdoEvOsNs4nM2a67GjxUoQZVTAWn+8 # lYhhNZLA4E+qHwpHTDCwyfyvCe615r72+bF7QO1KTrYeXGJg4SPk5kbEhCDqqjEu # SGqrlPwkC1x3WkTvb228iDddDQ8dccko3Sy6wAyz0o8dtp5p4iK+57qzB/84u94L # y3zQ+owOo9OLnXgdfMpN99HGQSvPR7CbP/2L293IrMCuPDUo9XhI7ARNS/phbT3Z # aDl10WGHKz1SJWOkPj137E6+xMKuCmOZDTufTcTaHfyliD04JRWgEZVnKJxKJDxd # 9e+lzHvXuYfO7YO11fr7DttPRnLEfjipELVTxrudM92eZ95XwdL4+ggfBTGHt76P # yFUrp7G8qsUjWd+DHPmoo6Gx71zPbE6v9J2NMn2/1k4WdPOYy7HTmDgCkRirRTvV # irYkHtdSFFsj3c0g4P4mhOzXnvUkGXzgrjteM5hlLy3bjSeZz9VMZADjiGqFGVPb # 6euPcLLa9oynkoP5UXmFd/9PjWcgnfIbQu2MVlIyWhjvTGZKSGecVZmH5pWTJuBV # xCbab1jYprRFpUIAMo94rgvRQRosomS1+GjGndFkX5++dTTlFSqpDLSGcEnPSGRx # o9n+IldNiqh2vjN1bj60pLfmrHN/F+hsGTsDJlW+kfeyBXBkGArg1rDjN5ae7GvD # UZK0N+OG0g== # =jwOI # -----END PGP SIGNATURE----- # gpg: Signature made Wed 29 Jan 2025 10:56:49 EST # gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D # gpg: issuer "farosas@suse.de" # gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown] # gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown] # gpg: WARNING: The key's User ID is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D * tag 'migration-20250129-pull-request' of https://gitlab.com/farosas/qemu: (42 commits) migration: refactor ram_save_target_page functions migration: Trivial cleanup on JSON writer of vmstate_save() migration: Merge precopy/postcopy on switchover start migration: Always set DEVICE state migration: Cleanup qemu_savevm_state_complete_precopy() migration: Unwrap qemu_savevm_state_complete_precopy() in postcopy migration: Notify COMPLETE once for postcopy migration: Take BQL slightly longer in postcopy_start() migration: Drop cached migration state in migration_maybe_pause() migration: Adjust locking in migration_maybe_pause() migration: Adjust postcopy bandwidth during switchover migration: Synchronize all CPU states only for non-iterable dump migration: Drop inactivate_disk param in qemu_savevm_state_complete* migration: Avoid two src-downtime-end tracepoints for postcopy migration: Optimize postcopy on downtime by avoiding JSON writer migration: Do not construct JSON description if suppressed migration: Remove postcopy implications in should_send_vmdesc() migration: cpr-transfer documentation migration-test: cpr-transfer tests/qtest: assert qmp connected ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2025-01-29migration: cpr-transfer modeSteve Sistare1-0/+7
Add the cpr-transfer migration mode, which allows the user to transfer a guest to a new QEMU instance on the same host with minimal guest pause time, by preserving guest RAM in place, albeit with new virtual addresses in new QEMU, and by preserving device file descriptors. Pages that were locked in memory for DMA in old QEMU remain locked in new QEMU, because the descriptor of the device that locked them remains open. cpr-transfer preserves memory and devices descriptors by sending them to new QEMU over a unix domain socket using SCM_RIGHTS. Such CPR state cannot be sent over the normal migration channel, because devices and backends are created prior to reading the channel, so this mode sends CPR state over a second "cpr" migration channel. New QEMU reads the cpr channel prior to creating devices or backends. The user specifies the cpr channel in the channel arguments on the outgoing side, and in a second -incoming command-line parameter on the incoming side. The user must start old QEMU with the the '-machine aux-ram-share=on' option, which allows anonymous memory to be transferred in place to the new process by transferring a memory descriptor for each ram block. Memory-backend objects must have the share=on attribute, but memory-backend-epc is not supported. The user starts new QEMU on the same host as old QEMU, with command-line arguments to create the same machine, plus the -incoming option for the main migration channel, like normal live migration. In addition, the user adds a second -incoming option with channel type "cpr". This CPR channel must support file descriptor transfer with SCM_RIGHTS, i.e. it must be a UNIX domain socket. To initiate CPR, the user issues a migrate command to old QEMU, adding a second migration channel of type "cpr" in the channels argument. Old QEMU stops the VM, saves state to the migration channels, and enters the postmigrate state. New QEMU mmap's memory descriptors, and execution resumes. The implementation splits qmp_migrate into start and finish functions. Start sends CPR state to new QEMU, which responds by closing the CPR channel. Old QEMU detects the HUP then calls finish, which connects the main migration channel. In summary, the usage is: qemu-system-$arch -machine aux-ram-share=on ... start new QEMU with "-incoming <main-uri> -incoming <cpr-channel>" Issue commands to old QEMU: migrate_set_parameter mode cpr-transfer {"execute": "migrate", ... {"channel-type": "main"...}, {"channel-type": "cpr"...} ... } Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Link: https://lore.kernel.org/r/1736967650-129648-17-git-send-email-steven.sistare@oracle.com Signed-off-by: Fabiano Rosas <farosas@suse.de>
2025-01-23stub: Fix build failure with --enable-user --disable-system --enable-toolsZhao Liu1-2/+2
Configuring "--enable-user --disable-system --enable-tools" causes the build failure with the following information: /usr/bin/ld: libhwcore.a.p/hw_core_qdev.c.o: in function `device_finalize': /qemu/build/../hw/core/qdev.c:688: undefined reference to `qapi_event_send_device_deleted' collect2: error: ld returned 1 exit status To fix the above issue, add qdev.c stub when build with `have_tools`. With this fix, QEMU could be successfully built in the following cases: --enable-user --disable-system --enable-tools --enable-user --disable-system --disable-tools --enable-user --disable-system Cc: qemu-stable@nongnu.org Fixes: 388b849fb6c3 ("stubs: avoid duplicate symbols in libqemuutil.a") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2766 Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Link: https://lore.kernel.org/r/20250121154318.214680-1-zhao1.liu@intel.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-12-21Merge tag 'exec-20241220' of https://github.com/philmd/qemu into stagingStefan Hajnoczi14-14/+14
Accel & Exec patch queue - Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander) - Add '-d invalid_mem' logging option (Zoltan) - Create QOM containers explicitly (Peter) - Rename sysemu/ -> system/ (Philippe) - Re-orderning of include/exec/ headers (Philippe) Move a lot of declarations from these legacy mixed bag headers: . "exec/cpu-all.h" . "exec/cpu-common.h" . "exec/cpu-defs.h" . "exec/exec-all.h" . "exec/translate-all" to these more specific ones: . "exec/page-protection.h" . "exec/translation-block.h" . "user/cpu_loop.h" . "user/guest-host.h" . "user/page-protection.h" # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t # wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt # KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K # A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8 # 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe/// # 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r # xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl # VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay # ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP # 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd # +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6 # x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo= # =cjz8 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 20 Dec 2024 11:45:20 EST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits) util/qemu-timer: fix indentation meson: Do not define CONFIG_DEVICES on user emulation system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header system/numa: Remove unnecessary 'exec/cpu-common.h' header hw/xen: Remove unnecessary 'exec/cpu-common.h' header target/mips: Drop left-over comment about Jazz machine target/mips: Remove tswap() calls in semihosting uhi_fstat_cb() target/xtensa: Remove tswap() calls in semihosting simcall() helper accel/tcg: Un-inline translator_is_same_page() accel/tcg: Include missing 'exec/translation-block.h' header accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h' accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h' qemu/coroutine: Include missing 'qemu/atomic.h' header exec/translation-block: Include missing 'qemu/atomic.h' header accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h' exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined target/sparc: Move sparc_restore_state_to_opc() to cpu.c target/sparc: Uninline cpu_get_tb_cpu_state() target/loongarch: Declare loongarch_cpu_dump_state() locally user: Move various declarations out of 'exec/exec-all.h' ... Conflicts: hw/char/riscv_htif.c hw/intc/riscv_aplic.c target/s390x/cpu.c Apply sysemu header path changes to not in the pull request. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-12-20include: Rename sysemu/ -> system/Philippe Mathieu-Daudé14-14/+14
Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
2024-12-19bql: add a "mock" BQL for Rust unit testsPaolo Bonzini1-1/+7
Right now, the stub BQL in stubs/iothread-lock.c always reports itself as unlocked. However, Rust would like to run its tests in an environment where the BQL *is* locked. Provide an extremely dirty function that flips the return value of bql_is_locked() to true. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-12-10bql: check that the BQL is not dropped within marked sectionsPaolo Bonzini1-0/+15
The Big QEMU Lock (BQL) is used to provide interior mutability to Rust code. While BqlCell performs indivisible accesses, an equivalent of RefCell will allow the borrower to hold to the interior content for a long time. If the BQL is dropped, another thread could come and mutate the data from C code (Rust code would panic on borrow_mut() instead). In order to prevent this, add a new BQL primitive that can mark BQL-atomic sections and aborts if the BQL is dropped within them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-10-30stubs: avoid duplicate symbols in libqemuutil.aPaolo Bonzini1-1/+6
qapi_event_send_device_deleted is always included (together with the rest of QAPI) in libqemuutil.a if either system-mode emulation or tools are being built, and in that case the stub causes a duplicate symbol to appear in libqemuutil.a. Add the symbol only if events are not being requested. Cc: qemu-stable@nongnu.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-07-03meson: Drop the .fa library suffixPaolo Bonzini1-1/+1
The non-standard .fa library suffix breaks the link source de-duplication done by Meson so drop it. The lack of link source de-duplication causes AddressSanitizer to complain ODR violations, and makes GNU ld abort when combined with clang's LTO. Fortunately, the non-standard suffix is not necessary anymore for two reasons. First, the non-standard suffix was necessary for fork-fuzzing. Meson wraps all standard-suffixed libraries with --start-group and --end-group. This made a fork-fuzz.ld linker script wrapped as well and broke builds. Commit d2e6f9272d33 ("fuzz: remove fork-fuzzing scaffolding") dropped fork-fuzzing so we can now restore the standard suffix. Second, the libraries are not even built anymore, because it is possible to just use the object files directly via extract_all_objects(). The occurences of the suffix were detected and removed by performing a tree-wide search with 'fa' and .fa (note the quotes and dot). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-ID: <20240524-xkb-v4-4-2de564e5c859@daynix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-06-24sysemu: add set_virtual_time to accel opsAlex Bennée2-1/+6
We are about to remove direct calls to individual accelerators for this information and will need a central point for plugins to hook into time changes. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240530220610.1245424-2-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240620152220.2192768-5-alex.bennee@linaro.org>
2024-06-21monitor: Report errors from monitor_fdset_dup_fd_addFabiano Rosas1-1/+1
I'm keeping the EACCES because callers expect to be able to look at errno. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-20monitor: Drop monitor_fdset_dup_fd_find/_remove()Peter Xu1-5/+0
Those functions are not needed, one remove function should already work. Clean it up. Here the code doesn't really care about whether we need to keep that dupfd around if close() failed: when that happens something got very wrong, keeping the dup_fd around the fdsets may not help that situation so far. Cc: Dr. David Alan Gilbert <dave@treblig.org> Cc: Markus Armbruster <armbru@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> [add missing return statement, removal during traversal is not safe] Signed-off-by: Fabiano Rosas <farosas@suse.de>
2024-06-08stubs/meson: Fix qemuutil build when --disable-systemZhao Liu1-7/+1
Compiling without system, user, tools or guest-agent fails with the following error message: ./configure --disable-system --disable-user --disable-tools \ --disable-guest-agent error message: /usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `error_printf': /media/liuzhao/data/qemu-cook/build/../util/error-report.c:38: undefined reference to `error_vprintf' /usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `vreport': /media/liuzhao/data/qemu-cook/build/../util/error-report.c:215: undefined reference to `error_vprintf' collect2: error: ld returned 1 exit status This is because tests/bench and tests/unit both need qemuutil, which requires error_vprintf stub when system is disabled. Add error_vprintf stub into stub_ss for all cases other than disabling system. Fixes: 3a15604900c4 ("stubs: include stubs only if needed") Reported-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240605152549.1795762-1-zhao1.liu@intel.com> [Include error-printf.c unconditionally. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03monitor: remove MonitorDef from typedefs.hPaolo Bonzini1-2/+1
MonitorDef is defined by hmp-target.h, and all users except one already include it; the reason why the stubs do not include it, is because hmp-target.h currently can only be used in files that are compiled per target. However, that is easily fixed. Because the benefit of having MonitorDef in typedefs.h is very small, do it and remove the type from typedefs.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-30stubs: Add missing qga stubsKonstantin Kostiuk1-1/+5
Compilation QGA without system and user fails ./configure --disable-system --disable-user --enable-guest-agent Link failure: /usr/bin/ld: libqemuutil.a.p/util_main-loop.c.o: in function `os_host_main_loop_wait': ../util/main-loop.c:303: undefined reference to `replay_mutex_unlock' /usr/bin/ld: ../util/main-loop.c:307: undefined reference to `replay_mutex_lock' /usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `error_printf': ../util/error-report.c:38: undefined reference to `error_vprintf' /usr/bin/ld: libqemuutil.a.p/util_error-report.c.o: in function `vreport': ../util/error-report.c:225: undefined reference to `error_vprintf' /usr/bin/ld: libqemuutil.a.p/util_qemu-timer.c.o: in function `timerlist_run_timers': ../util/qemu-timer.c:562: undefined reference to `replay_checkpoint' /usr/bin/ld: ../util/qemu-timer.c:530: undefined reference to `replay_checkpoint' /usr/bin/ld: ../util/qemu-timer.c:525: undefined reference to `replay_checkpoint' ninja: build stopped: subcommand failed. Fixes: 3a15604900 ("stubs: include stubs only if needed") Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com> Message-ID: <20240426121347.18843-2-kkostiuk@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-04-18stubs: move monitor_fdsets_cleanup with other fdset stubsPaolo Bonzini2-5/+6
Even though monitor_get_fd() has to remain separate because it is mocked by tests/unit/test-util-sockets, monitor_fdsets_cleanup() is logically part of the stubs for monitor/fds.c, so move it there. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-19-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18stubs: include stubs only if neededPaolo Bonzini2-45/+73
Currently it is not documented anywhere why some functions need to be stubbed. Group the files in stubs/meson.build according to who needs them, both to reduce the size of the compilation and to clarify the use of stubs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-18-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18stubs: split record/replay stubs furtherPaolo Bonzini3-2/+5
replay.c symbols are only needed by user mode emulation, with the exception of replay_mode that is needed by both user mode emulation (by way of qemu_guest_getrandom) and block layer tools (by way of util/qemu-timer.c). Since it is needed by libqemuutil rather than specific files that are part of the tools and emulators, split the replay_mode stub into its own file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-17-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18colo: move stubs out of stubs/Paolo Bonzini3-45/+0
Since the colo stubs are needed exactly when the build options are not enabled, move them together with the code they stub. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-16-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18memory-device: move stubs out of stubs/Paolo Bonzini2-23/+0
Since the memory-device stubs are needed exactly when the Kconfig symbols are not needed, move them to hw/mem/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-15-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18ramfb: move stubs out of stubs/Paolo Bonzini2-16/+0
Since the ramfb stubs are needed exactly when the Kconfig symbols are not needed, move them to hw/display/ and compile them when ramfb.c is absent. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-14-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18semihosting: move stubs out of stubs/Paolo Bonzini3-84/+0
Since the semihosting stubs are needed exactly when the Kconfig symbols are not needed, move them to semihosting/ and conditionalize them on CONFIG_SEMIHOSTING and/or CONFIG_SYSTEM_ONLY. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-13-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18hw/virtio: move stubs out of stubs/Paolo Bonzini2-25/+0
Since the virtio memory device stubs are needed exactly when the Kconfig symbol is not enabled, they can be placed in hw/virtio/ and conditionalized on CONFIG_VIRTIO_MD. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-12-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18hw/usb: move stubs out of stubs/Paolo Bonzini2-29/+0
Since the USB stubs are needed exactly when the Kconfig symbols are not enabled, they can be placed in hw/usb/ and conditionalized on CONFIG_USB. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-11-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18stubs: remove obsolete stubsPaolo Bonzini8-46/+0
These file define functions are are not called from common code anymore. Delete those functions and, if applicable, the entire files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-10-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-18hw/core: Move system emulation files to system_ssPaolo Bonzini2-0/+35
hotplug.c, qdev-hotplug.c and reset.c are not used by user emulation and need not be included in hwcore_ss. Move them to system_ss, where they belong, by letting the linker pull in the stubs when needed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240408155330.522792-8-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-03-11migration: privatize colo interfacesSteve Sistare1-1/+0
Remove private migration interfaces from net/colo-compare.c and push them to migration/colo.c. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-10-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-09hw/xen: Remove unnecessary xen_hvm_inject_msi() stubPhilippe Mathieu-Daudé1-4/+0
Since commit 04b0de0ee8 ("xen: factor out common functions") xen_hvm_inject_msi() stub is not required. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20231114143816.71079-8-philmd@linaro.org>
2024-01-19system/replay: Restrict icount to system emulationPhilippe Mathieu-Daudé1-19/+0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231208113529.74067-7-philmd@linaro.org>
2024-01-19util/async: Only call icount_notify_exit() if icount is enabledPhilippe Mathieu-Daudé1-1/+1
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231208113529.74067-6-philmd@linaro.org>
2024-01-19system/cpu-timers: Introduce ICountMode enumeratorPhilippe Mathieu-Daudé1-1/+1
Rather than having to lookup for what the 0, 1, 2, ... icount values are, use a enum definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20231208113529.74067-4-philmd@linaro.org>
2024-01-19system/cpu-timers: Have icount_configure() return a booleanPhilippe Mathieu-Daudé1-1/+3
Following the example documented since commit e3fe3988d7 ("error: Document Error API usage rules"), have icount_configure() return a boolean indicating whether an error is set or not. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231208113529.74067-2-philmd@linaro.org>
2024-01-08system/cpus: rename qemu_mutex_lock_iothread() to bql_lock()Stefan Hajnoczi1-3/+3
The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-11-01migration: per-mode blockersSteve Sistare1-0/+10
Extend the blocker interface so that a blocker can be registered for one or more migration modes. The existing interfaces register a blocker for all modes, and the new interfaces take a varargs list of modes. Internally, maintain a separate blocker list per mode. The same Error object may be added to multiple lists. When a block is deleted, it is removed from every list, and the Error is freed. No functional change until a new mode is added. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <1698263069-406971-3-git-send-email-steven.sistare@oracle.com>
2023-10-20migration: simplify blockersSteve Sistare1-2/+2
Modify migrate_add_blocker and migrate_del_blocker to take an Error ** reason. This allows migration to own the Error object, so that if an error occurs in migrate_add_blocker, migration code can free the Error and clear the client handle, simplifying client code. It also simplifies the migrate_del_blocker call site. In addition, this is a pre-requisite for a proposed future patch that would add a mode argument to migration requests to support live update, and maintain a list of blockers for each mode. A blocker may apply to a single mode or to multiple modes, and passing Error** will allow one Error object to be registered for multiple modes. No functional change. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Tested-by: Michael Galaxy <mgalaxy@akamai.com> Reviewed-by: Michael Galaxy <mgalaxy@akamai.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
2023-10-18Merge tag 'pull-vfio-20231018' of https://github.com/legoater/qemu into stagingStefan Hajnoczi1-0/+2
vfio queue: * Support for VFIODisplay migration with ramfb * Preliminary work for IOMMUFD support # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7 # 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56 # 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9 # ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb # r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF # AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D # w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV # 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn # UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk # 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy # xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku # stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4= # =s0fN # -----END PGP SIGNATURE----- # gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown] # gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-vfio-20231018' of https://github.com/legoater/qemu: (22 commits) hw/vfio: add ramfb migration support ramfb-standalone: add migration support ramfb: add migration support vfio/pci: Remove vfio_detach_device from vfio_realize error path vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW vfio/ap: Remove pointless apdev variable vfio/pci: Fix a potential memory leak in vfio_listener_region_add vfio/common: Move legacy VFIO backend code into separate container.c vfio/common: Introduce a global VFIODevice list vfio/common: Store the parent container in VFIODevice vfio/common: Introduce a per container device list vfio/common: Move VFIO reset handler registration to a group agnostic function vfio/ccw: Use vfio_[attach/detach]_device vfio/ap: Use vfio_[attach/detach]_device vfio/platform: Use vfio_[attach/detach]_device vfio/pci: Introduce vfio_[attach/detach]_device vfio/common: Extract out vfio_kvm_device_[add/del]_fd vfio/common: Introduce vfio_container_add|del_section_window() vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any vfio/common: Move IOMMU agnostic helpers to a separate file ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-18hw/vfio: add ramfb migration supportMarc-André Lureau1-0/+2
Add a "VFIODisplay" subsection whenever "x-ramfb-migrate" is turned on. Turn it off by default on machines <= 8.1 for compatibility reasons. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> [ clg: - checkpatch fixes - improved warn_report() in vfio_realize() ] Signed-off-by: Cédric Le Goater <clg@redhat.com>
generated by cgit v1.1 at 2025-07-10 20:48:01 +0000