| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The note talks about "unsupported" errors and QERR_UNSUPPORTED. The
former is vague, and the latter makes sense only in C, not in external
interface documentation. Fortunately, we don't have to address this
anymore: recent merge commit 3b5efc553eb got rid of these errors.
Delete the note.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240911131206.2503035-2-armbru@redhat.com>
|
|
The Route information of the Linux VM needs to be used
by administrators and users when debugging network problems
and troubleshooting.
Signed-off-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20240613092802.346246-2-demeng@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on other UNIX.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-18-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the get-users command on POSIX
platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-17-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the schema to fully
exclude generation of the filesystem trimming commands on POSIX
platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-16-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the filesystem trimming commands
on POSIX platforms lacking required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-15-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the schema to fully
exclude generation of the filesystem freezing commands on POSIX
platforms lacking the required APIs.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-14-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Windows.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-13-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Some commands were blocked based on CONFIG_FSFREEZE, but their
impl had nothing todo with CONFIG_FSFREEZE, and were instead
either Linux-only, or Win+Linux-only.
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the stats and fsinfo commands on
platforms that can't support them.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-12-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every comamnd that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the network interface command on
POSIX platforms lacking getifaddrs().
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20240712132459.3974109-11-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on non-Linux POSIX
platforms
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This has the additional benefit that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-10-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Rather than creating stubs for every command that just return
QERR_UNSUPPORTED, use 'if' conditions in the QAPI schema to
fully exclude generation of the commands on Windows.
The command will be rejected at QMP dispatch time instead,
avoiding reimplementing rejection by blocking the stub commands.
This changes the error message for affected commands from
{"class": "CommandNotFound", "desc": "Command FOO has been disabled"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
This also fixes an accidental inconsistency where some commands
(guest-get-diskstats & guest-get-cpustats) are implemented as
stubs, yet not added to the blockedrpc list. Those change their
error message from
{"class": "GenericError, "desc": "this feature or command is not currently supported"}
to
{"class": "CommandNotFound", "desc": "The command FOO has not been found"}
The final additional benefit is that the QGA protocol reference
now documents what conditions enable use of the command.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240712132459.3974109-9-berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Where I've noticed, rephrase the note to read more fluently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-12-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Aidan Leuck <aidan_leuck@selinc.com>
Tested-by: Dehan Meng <demeng@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240424144029.30665-3-aidan_leuck@selinc.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Since the commit 25b5ff1a86 ("qga: add mountpoint usage info to
GuestFilesystemInfo") we have 2 values reported in guest-get-fsinfo:
used = (f_blocks - f_bfree), total = (f_blocks - f_bfree + f_bavail) as
returned by statvfs(3). While on Windows guests that's all we can get
with GetDiskFreeSpaceExA(), on POSIX guests we might also be interested in
total file system size, as it's visible for root user. Let's add an
optional field 'total-bytes-privileged' to GuestFilesystemInfo struct,
which'd only be reported on POSIX and represent f_blocks value as returned
by statvfs(3).
While here, also tweak the docs to reflect better where those values
come from.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Link: https://lore.kernel.org/r/20240320161648.158226-2-andrey.drobyshev@virtuozzo.com
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
For legibility, wrap text paragraphs so every line is at most 70
characters long.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the refilled
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240322140910.328840-13-armbru@redhat.com>
|
|
Documentation claims the command can "return NULL". "NULL" doesn't
exist in JSON. "null" does, but the command returns lists, and null
isn't. Correct documentation to "return an empty list".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-13-armbru@redhat.com>
|
|
"Returns:" sections of guest-fsfreeze-freeze and
guest-fsfreeze-freeze-list describe both command behavior and success
response. Move behavior out, so "Returns:" is only about success
response.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-12-armbru@redhat.com>
|
|
Drop "on success" where it is redundant with "Returns:".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-11-armbru@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-10-armbru@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-9-armbru@redhat.com>
|
|
Add missing return member documentation of guest-get-disks,
guest-get-devices, guest-get-diskstats, and guest-get-cpustats.
The NVMe SMART information returned by guest-getdisks remains
undocumented. Add a TODO there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The command's doc comment describes the argument, but it's not marked
up as such. Easy enough to fix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The command's doc comment describes the argument, but it's not marked
up as such. Easy enough to fix.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The QAPI generator forces you to document your stuff. Except for
command arguments, event data, and members of enum and object types:
these the generator silently "documents" as "Not documented".
We can't require proper documentation there without first fixing all
the offenders. We've always had too many offenders to pull that off.
Right now, we have more than 500. Worse, we seem to fix old ones no
faster than we add new ones: in the past year, we fixed 22 ones, but
added 26 new ones.
To help arrest the backsliding, make missing documentation an error
unless the command, type, or event is in listed in new pragma
documentation-exceptions.
List all the current offenders: 117 commands and types in qapi/, and 9
in qga/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Documentation of commands guest-ssh-get-authorized-keys,
guest-ssh-add-authorized-keys, and guest-ssh-remove-authorized-keys
describes the command's purpose after its arguments. Everywhere else,
we do it the other way round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-6-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
If output is being captured for a guest-exec invocation, the out-data
and err-data fields of guest-exec-status are only populated after the
process is reaped. This is somewhat counter intuitive and too late to
change. Thus, it would be good to document the behavior.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
3 trivial fixes: 2 .json comments which goes to
executables, and 1 .h file comment.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Change
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
to
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
See recent commit "qapi: Relax doc string @name: description
indentation rules" for rationale.
Reflow paragraphs to 70 columns width, and consistently use two spaces
to separate sentences.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-17-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
|
|
Currently, any captured output (via `capture-output`) is segregated into
separate GuestExecStatus fields (`out-data` and `err-data`). This means
that downstream consumers have no way to reassemble the captured data
back into the original stream.
This is relevant for chatty and semi-interactive (ie. read only) CLI
tools. Such tools may deliberately interleave stdout and stderr for
visual effect. If segregated, the output becomes harder to visually
understand.
This commit adds a new enum variant to the GuestExecCaptureOutputMode
qapi to merge the output streams such that consumers can have a pristine
view of the original command output.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Previously capture-output was an optional boolean flag that either
captured all output or captured none. While this is OK in most cases, it
lacks flexibility for more advanced capture cases, such as wanting to
only capture stdout.
This commits refactors guest-exec qapi to take an enum for capture mode
instead while preserving backwards compatibility.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
GuestDiskStatsInfo's member documentation is parsed as ordinary text
due to missing colons. The generated documentation shows these
members as "Not documented".
The fix is obvious: add the missing colons.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-12-armbru@redhat.com>
|
|
Code returns a list of GuestNetworkInterface, documentation claims
GuestNetworkInfo, which doesn't exist. Fix the documentation.
Fixes: 3424fc9f16a1 (qemu-ga: add guest-network-get-interfaces command)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-3-armbru@redhat.com>
|
|
Delete "error state indicates", because it doesn't make sense.
I suspect it was an accident.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-2-armbru@redhat.com>
|
|
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221030105944.311940-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Let's use better, more inclusive wording here.
Message-Id: <20220727092135.302915-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
A vCPU thread always reaches 100% utilization when:
- guest uses idle=poll
- disable HLT vm-exit
- enable MWAIT
Add new guest agent command 'guest-get-cpustats' to get guest CPU
statistics, we can know the guest workload and how busy the CPU is.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220707005602.696557-3-pizhenwei@bytedance.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Add a new 'guest-get-diskstats' command for report disk io statistics
for Linux guests. This can be useful for getting io flow or handling
IO fault, no need to enter guests.
Signed-off-by: luzhipeng <luzhipeng@cestc.cn>
Message-Id: <20220520021935.676-1-luzhipeng@cestc.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
"Since X.Y" is not recognized as a tagged section, and therefore not
formatted as such in generated documentation. Fix by adding the
required colon.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220422132807.1704411-1-armbru@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
|
|
After assigning a NVMe/SCSI controller to guest by VFIO, we lose
everything on the host side. A guest uses these devices exclusively,
we usually don't care the actions on these devices. But there is a
low probability that hitting physical hardware warning, we need a
chance to get the basic smart log info.
Introduce disk smart, and implement NVMe smart on linux.
Thanks to Keith and Marc-André.
CC: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-3-pizhenwei@bytedance.com>
|
|
Assigning a NVMe disk by VFIO or emulating a NVMe controller by QEMU,
a NVMe disk get exposed in guest side. Support NVMe disk bus type and
implement posix version.
Test PCI passthrough case:
~#virsh qemu-agent-command buster '{"execute":"guest-get-disks"}' | jq
...
{
"name": "/dev/nvme0n1",
"dependencies": [],
"partition": false,
"address": {
"serial": "SAMSUNG MZQL23T8HCLS-00A07_S64HNE0N500076",
"bus-type": "nvme",
"bus": 0,
"unit": 0,
"pci-controller": {
"bus": 0,
"slot": 22,
"domain": 0,
"function": 0
},
"dev": "/dev/nvme0n1",
"target": 0
}
...
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-2-pizhenwei@bytedance.com>
|
|
Several QGA definitions omit a blank line after the symbol
declaration. This works OK currently, but it's the only place where we
do this. Adjust it for consistency.
Future commits may wind up enforcing this formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Change the 'if' condition strings to be C-agnostic. It will accept
'[A-Z][A-Z0-9_]*' identifiers. This allows to express configuration
conditions in other languages (Rust or Python for ex) or other more
suitable forms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-Id: <20210804083105.97531-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased with semantic conflict in redefined-event.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
We need the CCW address on the libvirt side to correctly identify
the disk, so add this information to the GuestDiskAddress on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20201127082353.448251-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The recently-added 'guest-get-disk' command returns a list of
GuestDiskInfo entries, which in turn have a 'dependents' field which
lists devices these entries are dependent upon. Thus, 'dependencies'
is a better name for this field. Address this by renaming the field
accordingly.
Additionally, 'dependents' is specified as non-optional, even though
it's not implemented for w32. This is misleading, since it gives users
the impression that a particular disk might not have dependencies,
when in reality that information is simply not known to the guest
agent. Address this by making 'dependents' an optional field, and only
marking it as in-use when the facilities to obtain this information are
available to the guest agent.
Cc: Eric Blake <eblake@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix-up merge conflicts due to qga-ssh-test being disabled in earlier
patch due to G_TEST_OPTION_ISOLATE_DIRS triggering build-oss-fuzz
leak detector.
*fix up style and disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
|
|
I prefer 'reset' over 'clear', since 'clear' and keys may have some
other relations or meaning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
|
