Age | Commit message (Collapse) | Author | Files | Lines |
|
The 'net_stream_send' method has a 68k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'buf1' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-32-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The 'net_socket_send' method has a 68k byte array used for copying
data between guest and host. Skip the automatic zero-init of this
array to eliminate the performance overhead in the I/O hot path.
The 'buf1' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20250610123709.835102-31-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
As we are moving to keep the mapping through all the vdpa device life
instead of resetting it at VirtIO reset, we need to move all its
dependencies to the initialization too. In particular devices with
x-svq=on need a valid iova_tree from the beginning.
Simplify the code also consolidating the two creation points: the first
data vq in case of SVQ active and CVQ start in case only CVQ uses it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To map the guest memory while it is migrating we need to create the
iova_tree, as long as the destination uses x-svq=on. Checking to not
override it.
The function vhost_vdpa_net_client_stop clear it if the device is
stopped. If the guest starts the device again, the iova tree is
recreated by vhost_vdpa_net_data_start_first or vhost_vdpa_net_cvq_start
if needed, so old behavior is kept.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20250522145839.59974-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Mechanical change using:
$ sed -i -E 's/\(InterfaceInfo.?\[/\(const InterfaceInfo\[/g' \
$(git grep -lE '\(InterfaceInfo.?\[\]\)')
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250424194905.82506-7-philmd@linaro.org>
|
|
Mechanical change using gsed, then style manually adapted
to pass checkpatch.pl script.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250424194905.82506-4-philmd@linaro.org>
|
|
A few functions now end with a label. The next commit will clean them
up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250407082643.2310002-3-armbru@redhat.com>
[Straightforward conflict with commit 988ad4ccebb6 (hw/loongarch/virt:
Fix cpuslot::cpu set at last in virt_cpu_plug()) resolved]
|
|
Tracked down with scripts/coccinelle/err-bad-newline.cocci.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250312143504.1659061-1-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
|
|
Add .set_vnet_le() function that always returns success, assuming that
vDPA h/w always implements LE data format. Otherwise, QEMU disables vDPA and
outputs the message:
"backend does not support LE vnet headers; falling back on userspace virtio"
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
ipvtap and macvtap create a file for each interface unlike tuntap, which
creates one file shared by all interfaces. Try to open a file dedicated
to the interface first for ipvtap and macvtap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Commit a0d7215e33 ("vhost-vdpa: do not cleanup the vdpa/vhost-net
structures if peer nic is present") effectively delayed the backend
cleanup, allowing the frontend or the guest to access it resources as
long as the frontend is still visible to the guest.
However it does not clean up the resources until the qemu process is
over. This causes an effective leak if the device is deleted with
device_del, as there is no way to close the vdpa device. This makes
impossible to re-add that device to this or other QEMU instances until
the first instance of QEMU is finished.
Move the cleanup from qemu_cleanup to the NIC deletion and to
net_cleanup.
Fixes: a0d7215e33 ("vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present")
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This change is used in later commits so we can avoid the removal of the
netclient if it is delayed.
No functional change intended.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
into staging
virtio,pc,pci: features, fixes, cleanups
Features:
SR-IOV emulation for pci
virtio-mem-pci support for s390
interleave support for cxl
big endian support for vdpa svq
new QAPI events for vhost-user
Also vIOMMU reset order fixups are in.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAme4b8sPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpHKcIAKPJsVqPdda2dJ7b7FdyRT0Q+uwezXqaGHd4
# 7Lzih1wsxYNkwIAyPtEb76/21qiS7BluqlUCfCB66R9xWjP5/KfvAFj4/r4AEduE
# fxAgYzotNpv55zcRbcflMyvQ42WGiZZHC+o5Lp7vDXUP3pIyHrl0Ydh5WmcD+hwS
# BjXvda58TirQpPJ7rUL+sSfLih17zQkkDcfv5/AgorDy1wK09RBKwMx/gq7wG8yJ
# twy8eBY2CmfmFD7eTM+EKqBD2T0kwLEeLfS/F/tl5Fyg6lAiYgYtCbGLpAmWErsg
# XZvfZmwqL7CNzWexGvPFnnLyqwC33WUP0k0kT88Y5wh3/h98blw=
# =tej8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 21 Feb 2025 20:21:31 HKT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (41 commits)
docs/devel/reset: Document reset expectations for DMA and IOMMU
hw/vfio/common: Add a trace point in vfio_reset_handler
hw/arm/smmuv3: Move reset to exit phase
hw/i386/intel-iommu: Migrate to 3-phase reset
hw/virtio/virtio-iommu: Migrate to 3-phase reset
vhost-user-snd: correct the calculation of config_size
net: vhost-user: add QAPI events to report connection state
hw/virtio/virtio-nsm: Respond with correct length
vdpa: Fix endian bugs in shadow virtqueue
MAINTAINERS: add more files to `vhost`
cryptodev/vhost: allocate CryptoDevBackendVhost using g_mem0()
vhost-iova-tree: Update documentation
vhost-iova-tree, svq: Implement GPA->IOVA & partial IOVA->HVA trees
vhost-iova-tree: Implement an IOVA-only tree
amd_iommu: Use correct bitmask to set capability BAR
amd_iommu: Use correct DTE field for interrupt passthrough
hw/virtio: reset virtio balloon stats on machine reset
mem/cxl_type3: support 3, 6, 12 and 16 interleave ways
hw/mem/cxl_type3: Ensure errp is set on realization failure
hw/mem/cxl_type3: Fix special_ops memory leak on msix_init_exclusive_bar() failure
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The netdev reports NETDEV_VHOST_USER_CONNECTED event when
the chardev is connected, and NETDEV_VHOST_USER_DISCONNECTED
when it is disconnected.
The NETDEV_VHOST_USER_CONNECTED event includes the chardev id.
This allows a system manager like libvirt to detect when the server
fails.
For instance with passt:
{ 'execute': 'qmp_capabilities' }
{ "return": { } }
[killing passt here]
{ "timestamp": { "seconds": 1739538634, "microseconds": 920450 },
"event": "NETDEV_VHOST_USER_DISCONNECTED",
"data": { "netdev-id": "netdev0" } }
[automatic reconnection with reconnect-ms]
{ "timestamp": { "seconds": 1739538638, "microseconds": 354181 },
"event": "NETDEV_VHOST_USER_CONNECTED",
"data": { "netdev-id": "netdev0", "chardev-id": "chr0" } }
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20250217092550.1172055-1-lvivier@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Creates and supports a GPA->IOVA tree and a partial IOVA->HVA tree by
splitting up guest-backed memory maps and host-only memory maps from the
full IOVA->HVA tree. That is, any guest-backed memory maps are now
stored in the GPA->IOVA tree and host-only memory maps stay in the
IOVA->HVA tree.
Also propagates the GPAs (in_addr/out_addr) of a VirtQueueElement to
vhost_svq_translate_addr() to translate GPAs to IOVAs via the GPA->IOVA
tree (when descriptors are backed by guest memory). For descriptors
backed by host-only memory, the existing partial SVQ IOVA->HVA tree is
used.
GPAs are unique in the guest's address space, ensuring unambiguous IOVA
translations. This avoids the issue where different GPAs map to the same
HVA, causing the original HVA->IOVA translation to potentially return an
IOVA associated with the wrong intended GPA.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20250217144936.3589907-3-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Creates and supports an IOVA-only tree to support a SVQ IOVA->HVA and
GPA->IOVA tree for host-only and guest-backed memory, respectively, in
the next patch.
The IOVA allocator still allocates an IOVA range but now adds this range
to the IOVA-only tree as well as to the full IOVA->HVA tree.
In the next patch, the full IOVA->HVA tree will be split into a partial
SVQ IOVA->HVA tree and a GPA->IOVA tree. The motivation behind having an
IOVA-only tree was to have a single tree that would keep track of all
allocated IOVA ranges between the partial SVQ IOVA->HVA and GPA->IOVA
trees.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20250217144936.3589907-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
|
|
trivial patches for 2025-01-30
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEZKoqtTHVaQM2a/75gqpKJDselHgFAmebf70ACgkQgqpKJDse
# lHgmWw/8DZXr5+Aar9FJZIUZWqxBxRzNjnvKEGQPCKI+Iqi3qkwOHij3Tr06vERM
# upWZ/6Gx6v8SFjlfCv4VvtAHwflLOFqBzDxrCRDiZqNuLDaXuLnTMF1H8teg4ciM
# 7uPjvI17LDgoBEDR27divxcLcP4dDI5RMkAndzyL1U9OGugO4vgmDUAuXkNzqBFS
# tnWQmay3VTDVNtd4YJvhqJM5UR/4mSHlISlZpbzpF2Pxd2Job6IHYEzmre+0iteQ
# TukjKkSQ7os7jEV984zVmwZnqCZrq6iIjX0nY6d1wWeDLjRMzLNqHuZ7jYVYDMWr
# G/HdXp7BfGW1kG67W86MWWVW6O96DsyN5e76pMdlu8DjDs1/hiTA02cUEa2x2Alw
# 3ngblJMC2JhvmuMLZStJf3zTb1GABijQJdfEYjUJ1FEY0dhVuK5teeTRjql7xjnw
# tHtaxn11ahifZ++kRAeZyinkkUlKLOcV8xoGqmv8uRjy6XepFASFkSj/jEbyohKF
# BGGvUVT1cp0Krr9TOAEnrhYEpXgHjxsR0PqTphH1wQojr/AyYTBwSy/wGWPbMvQQ
# u/hHoJ/RgiiSf5HW/PRUbWrTdgYPg8Ej/9n7geAZSk2e9hfGI6Ii88XOmrZefQ+4
# 2GQ+a3I2n4LQ1cyzrGZgUncwLClIpqN/WtRsUNEFQs6zrcvG52U=
# =2d/y
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jan 2025 08:33:49 EST
# gpg: using RSA key 64AA2AB531D56903366BFEF982AA4A243B1E9478
# gpg: Good signature from "Michael Tokarev <mjt@debian.org>" [unknown]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [unknown]
# gpg: aka "Michael Tokarev <mjt@tls.msk.ru>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 9D8B E14E 3F2A 9DD7 9199 28F1 61AD 3D98 ECDF 2C8E
# Subkey fingerprint: 64AA 2AB5 31D5 6903 366B FEF9 82AA 4A24 3B1E 9478
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu:
hw/i386/pc: Remove unused pc_compat_2_3 declarations
licenses: Remove SPDX tags not being license identifier for Linaro
tests/functional/test_mips_malta: Fix comment about endianness of the test
gdbstub/user-target: fix gdbserver int format (%d -> %x)
vvfat: create_long_filename: fix out-of-bounds array access
net/dump: Correctly compute Ethernet packet offset
net: Fix announce_self
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Update the code in net/slirp.c to be compatible with
libslirp 4.9.0, which deprecated slirp_pollfds_fill()
and started using slirp_os_socket type for sockets
(which is a 64-bit integer on win64) for all callbacks
starting with version 6 of the interface.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-ID: <20250130123253.864681-1-mjt@tls.msk.ru>
[thuth: Added some spaces to make checkpatch.pl happy]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When a packet is sent with QEMU_NET_PACKET_FLAG_RAW by QEMU it
never includes virtio-net header even if qemu_get_vnet_hdr_len()
is not 0, and filter-dump is not managing this case.
The only user of QEMU_NET_PACKET_FLAG_RAW is announce_self,
we can show the problem using it and tcpddump:
- QEMU parameters:
.. -monitor stdio \
-netdev bridge,id=netdev0,br=virbr0 \
-device virtio-net,mac=9a:2b:2c:2d:2e:2f,netdev=netdev0 \
-object filter-dump,netdev=netdev0,file=log.pcap,id=pcap0
- HMP command:
(qemu) announce_self
- TCP dump:
$ tcpdump -nxr log.pcap
without the fix:
08:00:06:04:00:03 > 2e:2f:80:35:00:01, ethertype Unknown (0x9a2b), length 50:
0x0000: 2c2d 2e2f 0000 0000 9a2b 2c2d 2e2f 0000
0x0010: 0000 0000 0000 0000 0000 0000 0000 0000
0x0020: 0000 0000
with the fix:
ARP, Reverse Request who-is 9a:2b:2c:2d:2e:2f tell 9a:2b:2c:2d:2e:2f, length 46
0x0000: 0001 0800 0604 0003 9a2b 2c2d 2e2f 0000
0x0010: 0000 9a2b 2c2d 2e2f 0000 0000 0000 0000
0x0020: 0000 0000 0000 0000 0000 0000 0000
Fixes: 481c52320a26 ("net: Strip virtio-net header when dumping")
Cc: akihiko.odaki@daynix.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
b9ad513e1876 ("net: Remove receive_raw()") adds an iovec entry
in qemu_deliver_packet_iov() to add the virtio-net header
in the data when QEMU_NET_PACKET_FLAG_RAW is set but forgets
to increase the number of iovec entries in the array, so
receive_iov() will only send the first entry (the virtio-net
entry, full of 0) and no data. The packet will be discarded.
The only user of QEMU_NET_PACKET_FLAG_RAW is announce_self.
We can see the problem with tcpdump:
- QEMU parameters:
.. -monitor stdio \
-netdev bridge,id=netdev0,br=virbr0 \
-device virtio-net,mac=9a:2b:2c:2d:2e:2f,netdev=netdev0 \
- HMP command:
(qemu) announce_self
- TCP dump:
$ sudo tcpdump -nxi virbr0
without the fix:
<nothing>
with the fix:
ARP, Reverse Request who-is 9a:2b:2c:2d:2e:2f tell 9a:2b:2c:2d:2e:2f, length 46
0x0000: 0001 0800 0604 0003 9a2b 2c2d 2e2f 0000
0x0010: 0000 9a2b 2c2d 2e2f 0000 0000 0000 0000
0x0020: 0000 0000 0000 0000 0000 0000 0000
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Bug: https://issues.redhat.com/browse/RHEL-73891
Fixes: b9ad513e1876 ("net: Remove receive_raw()")
Cc: akihiko.odaki@daynix.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
At least on macOS 12.7.2, vmnet doesn't pad Ethernet frames, such as the
host's ARP replies, to the minimum size (60 bytes before the frame check
sequence) defined in IEEE Std 802.3-2022, so guests' Ethernet device
drivers may drop them with "frame too short" errors.
This patch calls eth_pad_short_frame() to add padding, as in net/tap.c
and net/slirp.c. Thanks to Bin Meng, Philippe Mathieu-Daudé, and Phil
Dennis-Jordan for reviewing earlier versions.
Signed-off-by: William Hooper <wsh@wshooper.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2058
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20241102205653.30476-1-wsh@wshooper.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
|
|
Convert the data parameter of net_checksum_calculate() to void * to
save unnecessary casts for callers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This helper is mostly the same as migration_is_running(), except that one
has COLO reported as true, the other has CANCELLING reported as true.
Per my past years experience on the state changes, none of them should
matter.
To make it slightly safer, report both COLO || CANCELLING to be true in
migration_is_running(), then drop the other one. We kept the 1st only
because the name is simpler, and clear enough.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241024213056.1395400-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
GitHub's CodeQL reports a critical error which is fixed by using the MIN macro:
Unsigned difference expression compared to zero
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Cc: qemu-stable@nongnu.org
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
A netdev may not have a peer specified, resulting in NULL. We should
make it behave like /dev/null in such a case instead of letting it
cause segmentatin fault.
Fixes: 4b52d63249a5 ("tap: Remove qemu_using_vnet_hdr()")
Cc: qemu-stable@nongnu.org
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by; Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The patch fixes the following errors generated by GCC 14.2:
../src/net/tap-win32.c:343:19: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 176 [-Werror=format-truncation=]
343 | "%s\\%s\\Connection",
| ^~
344 | NETWORK_CONNECTIONS_KEY, enum_name);
| ~~~~~~~~~
../src/net/tap-win32.c:341:9: note: 'snprintf' output between 92 and 347 bytes into a destination of size 256
341 | snprintf(connection_string,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
342 | sizeof(connection_string),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
343 | "%s\\%s\\Connection",
| ~~~~~~~~~~~~~~~~~~~~~
344 | NETWORK_CONNECTIONS_KEY, enum_name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../src/net/tap-win32.c:242:58: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 178 [-Werror=format-truncation=]
242 | snprintf (unit_string, sizeof(unit_string), "%s\\%s",
| ^~
243 | ADAPTER_KEY, enum_name);
| ~~~~~~~~~
../src/net/tap-win32.c:242:9: note: 'snprintf' output between 79 and 334 bytes into a destination of size 256
242 | snprintf (unit_string, sizeof(unit_string), "%s\\%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
243 | ADAPTER_KEY, enum_name);
| ~~~~~~~~~~~~~~~~~~~~~~~
../src/net/tap-win32.c:620:52: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 245 [-Werror=format-truncation=]
620 | snprintf (device_path, sizeof(device_path), "%s%s%s",
| ^~
621 | USERMODEDEVICEDIR,
622 | device_guid,
| ~~~~~~~~~~~
../src/net/tap-win32.c:620:5: note: 'snprintf' output between 16 and 271 bytes into a destination of size 256
620 | snprintf (device_path, sizeof(device_path), "%s%s%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
621 | USERMODEDEVICEDIR,
| ~~~~~~~~~~~~~~~~~~
622 | device_guid,
| ~~~~~~~~~~~~
623 | TAPSUFFIX);
| ~~~~~~~~~~
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2607
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Do the same thing we already did for chardev in c8e2b6b4d7e, and
introduce a new 'reconnect-ms' option to make it possible to specify
sub-second timeouts. This also changes the related documentaion and
tests to use reconnect-ms as well.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The net/af-xdp.c code is enabled when the libxdp library is present,
however, it also has direct API calls to bpf_xdp_query_id &
bpf_xdp_detach which are provided by the libbpf library.
As a result if building with --disable-libbpf, but libxdp gets
auto-detected, we'll fail to link QEMU
/usr/bin/ld: libcommon.a.p/net_af-xdp.c.o: undefined reference to symbol 'bpf_xdp_query_id@@LIBBPF_0.7.0'
There are two bugs here
* Since we have direct libbpf API calls, when building
net/af-xdp.c, we must tell meson that libbpf is a
dependancy, so that we directly link to it, rather
than relying on indirect linkage.
* When must skip probing for libxdp at all, when libbpf
is not found, raising an error if --enable-libxdp was
given explicitly.
Fixes: cb039ef3d9e3112da01e1ecd9b136ac9809ef733
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
net_hub_port_find is unused since 2018's commit
af1a5c3eb4 ("net: Remove the deprecated "vlan" parameter")
qemu_receive_packet_iov is unused since commit
ffbd2dbd8e ("e1000e: Perform software segmentation for loopback")
in turn it was the last user of qemu_net_queue_receive_iov.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
VIRTIO_NET_F_RSC_EXT is implemented in the rx data path, which vhost
implements, so vhost needs to support the feature if it is ever to be
enabled with vhost. The feature must be disabled otherwise.
Fixes: 2974e916df87 ("virtio-net: support RSC v4/v6 tcp traffic for Windows HCK")
Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240802-rsc-v1-1-2b607bd2f555@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Oops, don't *delete* the model option when checking for 'help'.
Fixes: 64f75f57f9d2 ("net: Reinstate '-net nic, model=help' output as documented in man page")
Reported-by: Hans <sungdgdhtryrt@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Instead of using a slow implementation to close all open fd after
forking, use qemu_close_all_open_fd().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-6-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The same code is used twice to actually close all open file descriptors
after forking. Factorize it in a single place.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240802145423.3232974-4-cleger@rivosinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
While refactoring the NIC initialization code, I broke '-net nic,model=help'
which no longer outputs a list of available NIC models.
Fixes: 2cdeca04adab ("net: report list of available models according to platform")
Cc: qemu-stable@nongnu.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost
devices.
The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these
devices ensures that the backend is capable of offering and providing
support for this feature, and that it can be disabled if the backend
does not support it.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
macOS versions older than 12.0 are no longer supported.
docs/about/build-platforms.rst says:
> Support for the previous major version will be dropped 2 years after
> the new major version is released or when the vendor itself drops
> support, whichever comes first.
macOS 12.0 was released 2021:
https://www.apple.com/newsroom/2021/10/macos-monterey-is-now-available/
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240629-macos-v1-4-6e70a6b700a0@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety
of vhost devices.
The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays
for these devices ensures that the backend is capable of offering and
providing support for this feature, and that it can be disabled if the
backend does not support it.
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com>
Acked-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_vdpa_set_vring_ready() could already fail, but if Linux's
patch [1] will be merged, it may fail with more chance if
userspace does not activate virtqueues before DRIVER_OK when
VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK is not negotiated.
So better check its return value anyway.
[1] https://lore.kernel.org/virtualization/20240206145154.118044-1-sgarzare@redhat.com/T/#u
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20240322092315.31885-1-sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As far as I can tell this struct has never been used in this
file (it is used in can_core.c).
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
tap prepends a zeroed virtio-net header when writing a packet to a
tap with virtio-net header enabled but not in use. This only happens
when s->host_vnet_hdr_len == sizeof(struct virtio_net_hdr).
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This will save duplicate logic found in both of tap_receive_iov() and
tap_receive().
Suggested-by: "Zhang, Chen" <chen.zhang@intel.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
While netmap implements virtio-net header, it does not implement
receive_raw(). Instead of implementing receive_raw for netmap, add
virtio-net headers in the common code and use receive_iov()/receive()
instead. This also fixes the buffer size for the virtio-net header.
Fixes: fbbdbddec0 ("tap: allow extended virtio header with hash info")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The virtio-net header length assertion should happen for any clients.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
It was necessary since an Linux older than 2.6.35 may implement the
virtio-net header but may not allow to change its length. Remove it
since such an old Linux is no longer supported.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
libslirp provides a newer slirp_*_hostxfwd API meant for
address-agnostic forwarding instead of the is_udp parameter which is
limited to just TCP/UDP.
This paves the way for IPv6 and Unix socket support.
Signed-off-by: Nicholas Ngai <nicholas@ngai.me>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Breno Leitao <leitao@debian.org>
Message-Id: <20210925214820.18078-1-nicholas@ngai.me>
|
|
Since the colo stubs are needed exactly when the build options are not
enabled, move them together with the code they stub.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|