aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2013-02-27net: reduce the unnecessary memory allocation of multiqueueJason Wang1-10/+9
Edivaldo reports a problem that the array of NetClientState in NICState is too large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not used. Instead of static arrays, solving this issue by allocating the queues on demand for both the NetClientState array in NICState and VirtIONetQueue array in VirtIONet. Tested by myself, with single virtio-net-pci device. The memory allocation is almost the same as when multiqueue is not merged. Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27tap: set IFF_ONE_QUEUE per defaultPeter Lieven2-8/+11
historically the kernel queues packets two times. once at the device and second in qdisc. this is believed to cause interface stalls if one of these queues overruns. setting IFF_ONE_QUEUE is the default in kernels >= 3.8. the flag is ignored since then. see kernel commit 5d097109257c03a71845729f8db6b5770c4bbedc Signed-off-by: Peter Lieven <pl@kamp.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27tap: forbid creating multiqueue tap when hub is usedJason Wang1-0/+7
Obviously, hub does not support multiqueue tap. So this patch forbids creating multiple queue tap when hub is used to prevent the crash when command line such as "-net tap,queues=2" is used. Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27net: fix unbounded NetQueueLuigi Rizzo1-0/+15
In the current implementation of qemu, running without a network backend will cause the queue to grow unbounded when the guest is transmitting traffic. This patch fixes the problem by implementing bounded size NetQueue, used with an arbitrary limit of 10000 packets, and dropping packets when the queue is full _and_ the sender does not pass a callback. The second condition makes sure that we never drop packets that contains a callback (which would be tricky, because the producer expects the callback to be run when all previous packets have been consumed; so we cannot run it when the packet is dropped). If documentation is correct, producers that submit a callback should stop sending when their packet is queued, so there is no real risk that the queue exceeds the max size by large values. Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27net: fix qemu_flush_queued_packets() in presence of a hubLuigi Rizzo3-0/+21
When frontend and backend are connected through a hub as below (showing only one direction), and the frontend (or in general, all output ports of the hub) cannot accept more traffic, the backend queues packets in queue-A. When the frontend (or in general, one output port) becomes ready again, quemu tries to flush packets from queue-B, which is unfortunately empty. e1000.0 <--[queue B]-- hub0port0(hub)hub0port1 <--[queue A]-- tap.0 To fix this i propose to introduce a new function net_hub_flush() which is called when trying to flush a queue connected to a hub. Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-13net: Avoid NULL function pointer dereference on cleanupAndreas Färber1-1/+3
The pSeries machine and some other devices don't supply a cleanup callback. Revert part of 1ceef9f27359cbe92ef124bf74de6f792e71f6fb that started calling it unconditionally. Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Message-id: 1360707366-9271-1-git-send-email-afaerber@suse.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-07net: fix infinite loop on exitMichael Roth1-1/+1
1ceef9f27359cbe92ef124bf74de6f792e71f6fb added handling for cleaning up multiple queues in qemu_del_nic() for cases where multiqueue is in use. To determine the number of queues it looks at nic->conf->queues, then iterates through all the queues to cleanup the associated NetClientStates. If no queues are found, no NetClientStates are deleted. However, nic->conf->queues is only set when a peer is created via -netdev or netdev_add, and is otherwise 0. This causes us to spin in net_cleanup() if we attempt to shut down qemu before adding a host device. Since qemu_new_nic() unconditionally creates at least 1 queue/NetClientState at queue idx 0, make qemu_del_nic() always attempt to clean it up. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: unbreak -netdev tap,fd=XAnthony Liguori1-1/+1
The multiqueue patch series broke -netdev tap,fd=X which manifests as libvirt not being able to start a guest. This was because it passed NULL for the netdev name which results in an anonymous netdev device regardless of what the user specified. Cc: Jason Wang <jasowang@redhat.com> Cc: Bruce Rogers <brogers@suse.com> Reported-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: multiqueue supportJason Wang7-42/+135
Recently, linux support multiqueue tap which could let userspace call TUNSETIFF for a signle device many times to create multiple file descriptors as independent queues. User could also enable/disabe a specific queue through TUNSETQUEUE. The patch adds the generic infrastructure to create multiqueue taps. To achieve this a new parameter "queues" were introduced to specify how many queues were expected to be created for tap by qemu itself. Alternatively, management could also pass multiple pre-created tap file descriptors separated with ':' through a new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file descriptors could also be passed in this way. Each TAPState were still associated to a tap fd, which mean multiple TAPStates were created when user needs multiqueue taps. Since each TAPState contains one NetClientState, with the multiqueue nic support, an N peers of NetClientState were built up. A new parameter, mq_required were introduce in tap_open() to create multiqueue tap fds. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: introduce a helper to get the name of an interfaceJason Wang6-0/+32
This patch introduces a helper tap_get_ifname() to get the device name of tap device. This is needed when ifname is unspecified in the command line and qemu were asked to create tap device by itself. In this situation, the name were allocated by kernel, so if multiqueue is asked, we need to fetch its name after creating the first queue. Only linux has this support since it's the only platform that supports multiqueue tap. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: support enabling or disabling a queueJason Wang2-3/+50
This patch introduce a new bit - enabled in TAPState which tracks whether a specific queue/fd is enabled. The tap/fd is enabled during initialization and could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform specific helpers to do the real work. Polling of a tap fd can only done when the tap was enabled. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: add Linux multiqueue supportJason Wang6-0/+97
This patch add basic multiqueue support for Linux. When multiqueue is needed, we will first check whether kernel support multiqueue tap before creating more queues. Two new functions tap_fd_enable() and tap_fd_disable() were introduced to enable and disable a specific queue. Since the multiqueue is only supported in Linux, return error on other platforms. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: factor out common tap initializationJason Wang1-57/+73
This patch factors out the common initialization of tap into a new helper net_init_tap_one(). This will be used by multiqueue tap patches. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01tap: import linux multiqueue constantsJason Wang1-0/+4
Import multiqueue constants from if_tun.h from 3.8-rc3. A new ifr flag IFF_MULTI_QUEUE were introduced to create a multiqueue backend by calling TUNSETIFF with the this flag and with the same interface name many times. A new ioctl TUNSETQUEUE were introduced. When doing this ioctl with IFF_DETACH_QUEUE, the queue were disabled in the linux kernel. When doing this ioctl with IFF_ATTACH_QUEUE, the queue were enabled in the linux kernel. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: multiqueue supportJason Wang1-32/+81
This patch adds basic multiqueue support for qemu. The idea is simple, an array of NetClientStates were introduced in NICState, parse_netdev() were extended to find and match all NetClientStates belongs to the backend and place their pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates that belongs to a nic and NICStates belongs to the netdev. And a queue_index were introduced in NetClientState to track its index. After this, each peers of a NICState were abstracted as a queue. After this change, all NetClientState that belongs to the same backend/nic has the same id. When use want to change the link status, all NetClientStates that belongs to the same backend/nic will be also changed. When user want to delete a device or netdev, all NetClientStates that belongs to the same backend/nic will be deleted also. Changing or deleting an specific queue is not allowed. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce NetClientState destructorJason Wang1-4/+13
To allow allocating an array of NetClientState and free it once, this patch introduces destructor of NetClientState. Which could do type specific free, which could be used by multiqueue to free the array once. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_net_client_setup()Jason Wang1-10/+19
This patch separates the setup of NetClientState from its allocation, this will allow allocating an arrays of NetClientState and does the initialization one by one which is what multiqueue needs. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_find_net_clients_except()Jason Wang1-0/+21
In multiqueue, all NetClientState that belongs to the same netdev or nic has the same id. So this patches introduces an helper qemu_find_net_clients_except() which finds all NetClientState with the same id. This will be used by multiqueue networking. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: intorduce qemu_del_nic()Jason Wang1-1/+14
To support multiqueue nic, this patch separate the nic destructor from qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween NiCState and NetClientState were not 1:1 in multiqueue. The following patches would refactor this function to support multiqueue nic. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_nic()Jason Wang1-4/+16
To support multiqueue, this patch introduces a helper qemu_get_nic() to get NICState from a NetClientState. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: introduce qemu_get_queue()Jason Wang1-0/+5
To support multiqueue, the patch introduce a helper qemu_get_queue() which is used to get the NetClientState of a device. The following patches would refactor this helper to support multiqueue. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: tap: use abort() instead of assert(0)Jason Wang2-3/+3
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01net: tap: using bool instead of bitfieldJason Wang2-23/+21
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-30g_strdup(NULL) returns NULL; simplifyMarkus Armbruster1-3/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-17HMP: add QDict to info callback handlerWenchao Xia2-2/+2
This patch change all info call back function to take additional QDict * parameter, which allow those command take parameter. Now it is set to NULL at default case. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-12qemu-option: move standard option definitions out of qemu-config.cPaolo Bonzini1-0/+26
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-22net: add missing include fileLiming Wang1-0/+1
To fix building error: CC net/vde.o net/vde.c: In function ‘vde_cleanup’: net/vde.c:65:5: error: implicit declaration of function ‘qemu_set_fd_handler’ [-Werror=implicit-function-declaration] net/vde.c:65:5: error: nested extern declaration of ‘qemu_set_fd_handler’ [-Werror=nested-externs] cc1: all warnings being treated as errors Signed-off-by: Liming Wang <walimisdev@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-22net: Add missing include statement (fix compiler warnings for MinGW)Stefan Weil1-0/+1
These and some more compiler warnings were caused by a recent commit: net/tap-win32.c:724: warning: no previous prototype for ‘tap_has_ufo’ net/tap-win32.c:729: warning: no previous prototype for ‘tap_has_vnet_hdr’ ... Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-19Merge remote-tracking branch 'bonzini/header-dirs' into stagingAnthony Liguori23-215/+1114
* bonzini/header-dirs: (45 commits) janitor: move remaining public headers to include/ hw: move executable format header files to hw/ fpu: move public header file to include/fpu softmmu: move remaining include files to include/ subdirectories softmmu: move include files to include/sysemu/ misc: move include files to include/qemu/ qom: move include files to include/qom/ migration: move include files to include/migration/ monitor: move include files to include/monitor/ exec: move include files to include/exec/ block: move include files to include/block/ qapi: move include files to include/qobject/ janitor: add guards to headers qapi: make struct Visitor opaque qapi: remove qapi/qapi-types-core.h qapi: move inclusions of qemu-common.h from headers to .c files ui: move files to ui/ and include/ui/ qemu-ga: move qemu-ga files to qga/ net: reorganize headers net: move net.c to net/ ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-12-19softmmu: move remaining include files to include/ subdirectoriesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19softmmu: move include files to include/sysemu/Paolo Bonzini5-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini12-19/+19
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini5-5/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19qapi: move include files to include/qobject/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: reorganize headersPaolo Bonzini21-188/+25
Move public headers to include/net, and leave private headers in net/. Put the virtio headers in include/net/tap.h, removing the multiple copies that existed. Leave include/net/tap.h as the interface for NICs, and net/tap_int.h as the interface for OS-specific parts of the tap backend. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19net: move net.c to net/Paolo Bonzini2-1/+1057
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not include qemu-char everywherePaolo Bonzini4-3/+1
Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-18net, hub: fix the indent in the commentsZhi Yong Wu1-1/+1
Remove some redundant blanks in the comments of net_hub_id_for_client(). Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-12tap: reset vnet header size on openMichael S. Tsirkin1-0/+8
For tap, we currently assume the vnet header size is 10 (the default value) but that might not be the case if tap is persistent and has been used by qemu previously. To fix, set vnet header size correctly on open. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-07Fix spelling (prefered -> preferred)Stefan Weil1-3/+4
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-20tap: reset vnet header size on openMichael S. Tsirkin1-0/+7
For tap, we currently assume the vnet header size is 10 (the default value) but that might not be the case if tap is persistent and has been used by qemu previously. To fix, set host header size in tap device on open. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-15slirp: Add domain-search option to slirp's DHCP serverKlaus Stengel1-3/+32
This patch will allow the user to include the domain-search option in replies from the built-in DHCP server. The domain suffixes can be specified by adding dnssearch= entries to the "-net user" parameter. [Jan: tiny style adjustments] Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-11-01net: use "socket" model name for UDP socketsLei Li1-1/+1
Fix the problem that can not delete the udp socket. It's caused by passing "udp" model to net_socket_udp_init, but we do not have "udp" model in our model list. Pass the right model "socket" to init function. https://bugs.launchpad.net/qemu/+bug/1073585?comments=all Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-30tap-win32: stubs to fix win32 buildMichael S. Tsirkin1-0/+10
Add missing stubs to win32 to fix link failure. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-19net/tap-win32: Fix compiler warning caused by missing include statementStefan Weil1-0/+1
The include file for net_init_tap was missing: net/tap-win32.c:703: warning: no previous prototype for ‘net_init_tap’ Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-10-08net: consolidate NetClientState header files into onePaolo Bonzini13-92/+34
This patch doesn't seem much useful alone, I must admit. However, it makes sense as part of the upcoming directory reorganization, where I want to have include/net/tap.h as the net<->hw interface for tap. Then having both net/tap.h and include/net/tap.h does not work. "Fixed" by moving all the init functions to a single header file net/clients.h. The patch also adopts a uniform style for including net/*.h files from net/*.c, without the net/ path. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-23net/socket: Fix compiler warning (regression for MinGW)Stefan Weil1-3/+3
Commit 213fd5087e2e4e2da10ad266df0ba950cf7618bf removed a type cast which is needed for MinGW: net/socket.c:136: warning: pointer targets in passing argument 2 of ‘sendto’ differ in signedness /usr/lib/gcc/amd64-mingw32msvc/4.4.4/../../../../amd64-mingw32msvc/include/winsock2.h:1313: note: expected ‘const char *’ but argument is of type ‘const uint8_t *’ Add a 'qemu_sendto' macro which provides that type cast where needed and use the new macro instead of 'sendto'. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-09-14net: EAGAIN handling for net/socket.c TCPStefan Hajnoczi1-5/+31
Replace spinning send_all() with a proper non-blocking send. When the socket write buffer limit is reached, we should stop trying to send and wait for the socket to become writable again. Non-blocking TCP sockets can return in two different ways when the write buffer limit is reached: 1. ret = -1 and errno = EAGAIN/EWOULDBLOCK. No data has been written. 2. ret < total_size. Short write, only part of the message was transmitted. Handle both cases and keep track of how many bytes have been written in s->send_index. (This includes the 'length' header before the actual payload buffer.) Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14net: EAGAIN handling for net/socket.c UDPStefan Hajnoczi1-2/+12
Implement asynchronous send for UDP (or other SOCK_DGRAM) sockets. If send fails with EAGAIN we wait for the socket to become writable again. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-09-14net: asynchronous send/receive infrastructure for net/socket.cStefan Hajnoczi1-6/+52
The net/socket.c net client is not truly asynchronous. This patch borrows the qemu_set_fd_handler2() code from net/tap.c as the basis for proper asynchronous send/receive. Only read packets from the socket when the peer is able to receive. This avoids needless queuing. Later patches implement asynchronous send. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
generated by cgit v1.1 at 2024-12-29 03:15:08 +0000