aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2015-10-22vhost user: add rarp sending after live migration for legacy guestThibaut Collet1-2/+22
A new vhost user message is added to allow QEMU to ask to vhost user backend to broadcast a fake RARP after live migration for guest without GUEST_ANNOUNCE capability. This new message is sent only if the backend supports the new VHOST_USER_PROTOCOL_F_RARP protocol feature. The payload of this new message is the MAC address of the guest (not known by the backend). The MAC address is copied in the first 6 bytes of a u64 to avoid to create a new payload message type. This new message has no equivalent ioctl so a new callback is added in the userOps structure to send the request. Upon reception of this new message the vhost user backend must generate and broadcast a fake RARP request to notify the migration is terminated. Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> [Rebased and fixed checkpatch errors - Marc-André] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost user: add support of live migrationThibaut Collet1-2/+10
Some vhost user backends are able to support live migration. To provide this service the following features must be added: 1. Add the VIRTIO_NET_F_GUEST_ANNOUNCE capability to vhost-net when netdev backend is vhost-user. 2. Provide a nop receive callback to vhost-user. This callback is called by: * qemu_announce_self after a migration to send fake RARP to avoid network outage for peers talking to the migrated guest. - For guest with GUEST_ANNOUNCE capabilities, guest already sends GARP when the bit VIRTIO_NET_S_ANNOUNCE is set. => These packets must be discarded. - For guest without GUEST_ANNOUNCE capabilities, migration termination is notified when the guest sends packets. => These packets can be discarded. * virtio_net_tx_bh with a dummy boot to send fake bootp/dhcp request. BIOS guest manages virtio driver to send 4 bootp/dhcp request in case of dummy boot. => These packets must be discarded. Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22net: add trace_vhost_user_eventMarc-André Lureau1-2/+2
Replace error_report() and use tracing instead. It's not an error to get a connection or a disconnection, so silence this and trace it instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-21net: don't set native endiannessMichael S. Tsirkin1-0/+8
commit 5be7d9f1b1452613b95c6ba70b8d7ad3d0797991 vhost-net: tell tap backend about the vnet endianness makes vhost net always try to set LE - even if that matches the native endian-ness. This makes it fail on older kernels on x86 without TUNSETVNETLE support. To fix, make qemu_set_vnet_le/qemu_set_vnet_be skip the ioctl if it matches the host endian-ness. Reported-by: Marcel Apfelbaum <marcel@redhat.com> Cc: Greg Kurz <gkurz@linux.vnet.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2015-10-12netfilter: add a netbuffer filterYang Hongyang2-0/+187
This filter is to buffer/release packets. Can be used when using MicroCheckpointing or other Remus like VM FT solutions. You can also use it to crudely simulate network delay. Doesn't actually delay individual packets, but batches them together, which is a delay of sorts. Usage: -netdev tap,id=bn0 -object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000 NOTE: Interval is in microseconds, it can't be omitted currently, and can't be 0. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net/queue: export qemu_net_queue_append_iovYang Hongyang1-6/+6
This will be used by buffer filter implementation later to queue packets. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: print filter info associate with the netdevYang Hongyang2-0/+31
When execute "info network", print filter info also. add a info_str member to NetFilterState, store specific filters info. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: add an API to pass the packet to next filterYang Hongyang1-0/+58
add an API qemu_netfilter_pass_to_next() to pass the packet to next filter. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net/queue: introduce NetQueueDeliverFuncYang Hongyang2-4/+6
net/queue.c has logic to send/queue/flush packets but a qemu_deliver_packet_iov() call is hardcoded. Abstract this func so that we can use our own deliver function in netfilter. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12net: merge qemu_deliver_packet and qemu_deliver_packet_iovYang Hongyang2-36/+21
qemu_deliver_packet_iov already have the compat delivery, we can drop qemu_deliver_packet. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12netfilter: hook packets before net queue sendYang Hongyang2-0/+83
Capture packets that will be sent. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-10-12init/cleanup of netfilter objectYang Hongyang3-0/+146
Add a netfilter object based on QOM. A netfilter is attached to a netdev, captures all network packets that pass through the netdev. When we delete the netdev, we also delete the netfilter object attached to it, because if the netdev is removed, the filter which attached to it is useless. Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-09-25Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier-misc/tags/pull-muldiv64-20150925' into staging Remove muldiv64() by using period instead of frequency # gpg: Signature made Fri 25 Sep 2015 14:54:37 BST using RSA key ID 3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier-misc/tags/pull-muldiv64-20150925: net: remove muldiv64() bt: remove muldiv64() hpet: remove muldiv64() arm: clarify the use of muldiv64() openrisc: remove muldiv64() mips: remove muldiv64() pcnet: remove muldiv64() rtl8139: remove muldiv64() i6300esb: remove muldiv64() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25net: remove muldiv64()Laurent Vivier1-1/+1
muldiv64() is used to convert nanoseconds to microseconds. x = muldiv64(qemu_clock_get_ns(..), 1000000, get_ticks_per_sec()); As get_ticks_per_sec() is 10^9, it can be replaced by: x = qemu_clock_get_us(..); Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-24vhost-user: add multiple queue supportChangchun Ouyang1-48/+93
This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-11trivial: remove trailing newline from error_reportJohn Snow1-2/+2
Minor cleanup. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-07-20net: Flush queued packets when guest resumesFam Zheng1-7/+12
Since commit 6e99c63 "net/socket: Drop net_socket_can_send" and friends, net queues need to be explicitly flushed after qemu_can_send_packet() returns false, because the netdev side will disable the polling of fd. This fixes the case of "cont" after "stop" (or migration). Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1436232067-29144-1-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-20socket: pass correct size in net_socket_send()Jason Wang1-1/+1
We should pass the size of packet instead of the remaining to qemu_send_packet_async(). Fixes: 6e99c631f116221d169ea53953d91b8aa74d297a ("net/socket: Drop net_socket_can_send") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 1436259656-24263-1-git-send-email-jasowang@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-20Revert "vhost-user: add multi queue support"Michael S. Tsirkin1-24/+13
This reverts commit 830d70db692e374b55555f4407f96a1ceefdcc97. The interface isn't fully backwards-compatible, which is bad. Let's redo this properly after 2.4. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-24net: simplify net_client_init1()Stefan Hajnoczi1-22/+16
Drop the union and move the hubport creation into the !is_netdev case. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-6-git-send-email-stefanha@redhat.com
2015-06-24net: drop if expression that is always trueStefan Hajnoczi1-17/+14
Both is_netdev and !is_netdev paths already check that net_client_init_func[opts->kind] is non-NULL so there is no need for the if statement. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-5-git-send-email-stefanha@redhat.com
2015-06-24net: raise an error if -net type is invalidStefan Hajnoczi1-0/+11
When a -net type is used that was not compiled into the binary there should be an error message. Note the special case for -net none, which is a no-op. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-4-git-send-email-stefanha@redhat.com
2015-06-24net: replace net_client_init1() netdev whitelist with blacklistStefan Hajnoczi1-25/+3
It's cumbersome to keep the whitelist up-to-date. New netdev backends should most likely be allowed so a blacklist makes more sense than a whitelist. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1432743412-15943-3-git-send-email-stefanha@redhat.com
2015-06-24net: add missing "netmap" to host_net_devices[]Stefan Hajnoczi1-0/+3
Although hmp-commands.hx lists "netmap" as a valid host_net_add type, the command rejects it because it's missing from the list. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1432743412-15943-2-git-send-email-stefanha@redhat.com
2015-06-22Include monitor/monitor.h exactly where neededMarkus Armbruster1-1/+0
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster1-0/+1
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Move #include out of qerror.hMarkus Armbruster2-0/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qmp: Wean off qerror_report()Markus Armbruster1-10/+6
The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Clean up QERR_ macros to expand into a single stringMarkus Armbruster1-6/+6
These macros expand into error class enumeration constant, comma, string. Unclean. Has been that way since commit 13f59ae. The error class is always ERROR_CLASS_GENERIC_ERROR since the previous commit. Clean up as follows: * Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and delete it from the QERR_ macro. No change after preprocessing. * Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into error_setg(...). Again, no change after preprocessing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22qerror: Eliminate QERR_DEVICE_NOT_FOUNDMarkus Armbruster1-2/+4
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used in new code. Hiding them in QERR_ macros makes new uses hard to spot. Fortunately, there's just one such macro left. Eliminate it with this coccinelle semantic patch: @@ expression EP, E; @@ -error_set(EP, QERR_DEVICE_NOT_FOUND, E) +error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22QemuOpts: Wean off qerror_report_err()Markus Armbruster1-2/+3
qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell11-2/+122
virtio, pci fixes, enhancements Most notably this includes virtio cross-endian patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost: enable vhost without without MSI-X pci: Don't register a specialized 'config_write' if default behavior is intended hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf() vhost_net: re-enable when cross endian vhost-net: tell tap backend about the vnet endianness tap: fix non-linux build tap: add VNET_LE/VNET_BE operations vhost: set vring endianness for legacy virtio virtio: introduce virtio_legacy_is_cross_endian() linux-headers: sync vhost.h vhost-user: part of virtio Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19vhost: enable vhost without without MSI-XPankaj Gupta2-2/+0
We use vhostforce to enable vhost even if Guests don't have MSI-X support and we fall back to QEMU virtio-net. This gives a very small performance gain, but the disadvantage is that guest now controls which virtio code is running (qemu or vhost) so our attack surface is doubled. This patch will enable vhost unconditionally whenever it's requested. For compatibility, enable vhost when vhostforce is set, as well. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-19tap: fix non-linux buildMichael S. Tsirkin5-0/+50
tap_fd_set_vnet_le/tap_fd_set_vnet_be was missing, fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2015-06-17tap: add VNET_LE/VNET_BE operationsGreg Kurz5-0/+72
The linux tap and macvtap backends can be told to parse vnet headers according to little or big endian. This is done through the TUNSETVNETLE and TUNSETVNETBE ioctls. This patch brings all the plumbing for QEMU to use these APIs. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-12Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handlerFam Zheng4-16/+16
Done with following Coccinelle semantic patch, plus manual cosmetic changes in net/*.c. @@ expression E1, E2, E3, E4; @@ - qemu_set_fd_handler2(E1, NULL, E2, E3, E4); + qemu_set_fd_handler(E1, E2, E3, E4); Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-8-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12tap: Drop tap_can_sendFam Zheng1-11/+2
This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be sent to peer when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-7-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12net/socket: Drop net_socket_can_sendFam Zheng1-12/+19
This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be sent to peer when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. If the peer is not ready, disable the read poll until send completes. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-6-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12netmap: Drop netmap_can_sendFam Zheng1-12/+2
This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be copied from s->fd to s->iov when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. Also remove the qemu_can_send_packet() check in netmap_send. If it's true, we are good; if it's false, the qemu_sendv_packet_async would return 0 and read poll will be disabled until netmap_send_completed is called. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-5-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12l2tpv3: Drop l2tpv3_can_sendFam Zheng1-10/+1
This callback is called by main loop before polling s->fd, if it returns false, the fd will not be polled in this iteration. This is redundant with checks inside read callback. After this patch, the data will be copied from s->fd to s->msgvec when it arrives. If the device can't receive, it will be queued to incoming_queue, and when the device status changes, this queue will be flushed. Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1433400324-7358-4-git-send-email-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-09vhost-user: Improve -netdev/netdev_add/-net/... error reportingMarkus Armbruster1-13/+12
When -netdev vhost-user fails, it first reports a specific error, then one or more generic ones, like this: $ qemu-system-x86_64 -netdev vhost-user,id=foo,chardev=xxx qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: chardev "xxx" not found qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: No suitable chardev found qemu-system-x86_64: -netdev vhost-user,id=foo,chardev=xxx: Device 'vhost-user' could not be initialized With the command line, the messages go to stderr. In HMP, they go to the monitor. In QMP, the last one becomes the error reply, and the others go to stderr. Convert net_init_vhost_user() and its helpers to Error. This suppresses the unwanted unspecific error messages, and makes the specific error the QMP error reply. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-09QemuOpts: Convert qemu_opt_foreach() to ErrorMarkus Armbruster1-3/+4
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09QemuOpts: Drop qemu_opt_foreach() parameter abort_on_failureMarkus Armbruster1-1/+1
When the argument is non-zero, qemu_opt_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the callback's value from the last iteration. The two callers that pass zero could just as well pass one: * qemu_spice_init()'s callback add_channel() either returns zero or exit()s. * config_write_opts()'s callback config_write_opt() always returns zero. Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-06-09QemuOpts: Convert qemu_opts_foreach() to ErrorMarkus Armbruster2-6/+7
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-08QemuOpts: Drop qemu_opts_foreach() parameter abort_on_failureMarkus Armbruster2-3/+4
When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2015-06-03slirp: use less predictable directory name in /tmp for smb config ↵Michael Tokarev1-4/+3
(CVE-2015-4037) In this version I used mkdtemp(3) which is: _BSD_SOURCE || /* Since glibc 2.10: */ (_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700) (POSIX.1-2008), so should be available on systems we care about. While at it, reset the resulting directory name within smb structure on error so cleanup function wont try to remove directory which we failed to create. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-06-01vhost-user: add multi queue supportOuyang Changchun1-13/+24
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-27net/net: Record usage status of mac addressShannon Zhao1-4/+55
Currently QEMU dynamically generates mac address for the NIC which doesn't specify the mac address. But when we hotplug a NIC without specifying mac address, the mac address will increase for the same NIC along with hotplug and hot-unplug, and at last it will overflow. And if we codeplug one NIC with mac address e.g. "52:54:00:12:34:56", then hotplug one NIC without specifying mac address and the mac address of the hotplugged NIC is duplicate of "52:54:00:12:34:56". This patch add a mac_table to record the usage status and free the mac address when the NIC is unrealized. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Improve -netdev/netdev_add/-net/... tap error reportingMarkus Armbruster1-23/+22
When -netdev tap fails, it first reports a specific error, then a generic one, like this: $ qemu-system-x86_64 -netdev tap,id=foo qemu-system-x86_64: -netdev tap,id=foo: could not configure /dev/net/tun: Operation not permitted qemu-system-x86_64: -netdev tap,id=foo: Device 'tap' could not be initialized With the command line, the messages go to stderr. In HMP, they go to the monitor. In QMP, the second one becomes the error reply, and the first one goes to stderr. Convert net_init_tap() to Error. This suppresses the unwanted second message, and makes the specific error the QMP error reply. [Dropped duplicate "and" from error message as suggested by Eric Blake: "ifname=, script=, downscript=, and vnet_hdr=, " "queues=, and vhostfds= are invalid with helper=" --Stefan] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-16-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-27tap: Finish conversion of tap_open() to ErrorMarkus Armbruster1-4/+0
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1431691143-1015-15-git-send-email-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.1 at 2024-11-04 18:55:59 +0000