aboutsummaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2016-04-06filter-buffer: fix segfault when starting qemu with status=off propertyzhanghailiang1-1/+1
After commit 338d3f, we support 'status' property for filter object. The segfault can be triggered by starting qemu with 'status=off' property for filter, when the s->incoming_queue is NULL, we reference it directly in qemu_net_queue_flush() which was called in status_changed() callback function. We shouldn't trigger status_changed() before the filter was initialized, We can check the value of 'nf->netdev' to confirm if the filter is initialized or not, so let's check its value before calling status_changed(). Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06net: fix OptsVisitor memory leakPaolo Bonzini1-0/+1
Fixes 96a1616("qapi-dealloc: Reduce use outside of generated code") Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06net: Allocating Large sized arrays to heapPooja Dhannawat1-4/+9
nc_sendv_compat has a huge stack usage of 69680 bytes approx. Moving large arrays to heap to reduce stack usage. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-06util: Improved qemu_hexmap() to include an ascii dump of the bufferIsaac Lozano1-29/+1
qemu_hexdump() in util/hexdump.c has been changed to give also include a ascii dump of the buffer. Also, calls to hex_dump() in net/net.c have been replaced with calls to qemu_hexdump(). This takes care of two misc BiteSized Tasks. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Isaac Lozano <109lozanoi@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-04-04net: fix missing include of qapi/error.h in netmap.cDaniel P. Berrange1-0/+1
The netmap.c file fails to build on FreeBSD with net/netmap.c:95:9: warning: implicit declaration of function 'error_setg_errno' is invalid in C99 [-Wimplicit-function-declaration] error_setg_errno(errp, errno, "Failed to nm_open() %s", ^ net/netmap.c:432:9: warning: implicit declaration of function 'error_propagate' is invalid in C99 [-Wimplicit-function-declaration] error_propagate(errp, err); ^ Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1459429690-6144-1-git-send-email-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-01slirp: Allow disabling IPv4 or IPv6Samuel Thibault1-6/+30
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and IPv6-only network environments. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-31Fix ipv6 options according to documentationSamuel Thibault1-7/+7
The options names were fixed in the qapi layer, but not in the command-line options. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-30net/filter-mirror: implement filter-redirectorZhang Chen1-2/+246
Filter-redirector is a netfilter plugin. It gives qemu the ability to redirect net packet. redirector can redirect filter's net packet to outdev. and redirect indev's packet to filter. filter + redirector | +--------------+ | | | indev +-----------+ +----------> outdev | | | +--------------+ | v filter usage: -netdev user,id=hn0 -chardev socket,id=s0,host=ip_primary,port=X,server,nowait -chardev socket,id=s1,host=ip_primary,port=Y,server,nowait -filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30net/filter-mirror: Change filter_mirror_send interfaceZhang Chen1-5/+5
Change filter_mirror_send interface to make it easier to used by other filter Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-30net/filter-mirror:Add filter-mirrorZhang Chen2-0/+184
Filter-mirror is a netfilter plugin. It gives qemu the ability to mirror packets to a chardev. usage: -netdev tap,id=hn0 -chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait -filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0 Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-29Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell1-3/+3
staging slirp updates # gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D # gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D * remotes/thibault/tags/samuel-thibault: Rework ipv6 options Use C99 flexible array instead of 1-byte trailing array Avoid embedding struct mbuf in other structures slirp: send icmp6 errors when UDP send failed slirp: Fix memory leak on small incoming ipv4 packet Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29Rework ipv6 optionsSamuel Thibault1-3/+3
Rename the recently-added ip6-foo options into ipv6-foo options, to make them coherent with other ipv6 options. Also rework the documentation. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa7-2/+8
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster10-0/+10
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake11-13/+13
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-03-15Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into ↵Peter Maydell2-6/+106
staging slirp: Adding IPv6 support to Qemu -net user mode # gpg: Signature made Tue 15 Mar 2016 16:06:03 GMT using RSA key ID FB6B2F1D # gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>" # gpg: aka "Samuel Thibault <sthibault@debian.org>" # gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" # gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6 # Subkey fingerprint: F632 74CD C630 0873 CB3D 29D9 E3E5 1CE8 FB6B 2F1D * remotes/thibault/tags/samuel-thibault: slirp: Add IPv6 support to the TFTP code qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses slirp: Adding IPv6 address for DNS relay slirp: Handle IPv6 in TCP functions slirp: Reindent after refactoring slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff slirp: Factorizing tcpiphdr structure with an union slirp: Adding IPv6 UDP support slirp: Adding ICMPv6 error sending slirp: Fix ICMP error sending slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-15Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-5/+9
vhost, virtio, pci, pc, acpi nvdimm work sparse cpu id rework ipmi enhancements fixes all over the place pxb option to tweak chassis number Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 15 Mar 2016 14:33:10 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (51 commits) hw/acpi: fix GSI links UID ipmi: add some local variables in ipmi_sdr_init ipmi: remove the need of an ending record in the SDR table ipmi: use a function to initialize the SDR table ipmi: add a realize function to the device class ipmi: add rsp_buffer_set_error() helper ipmi: remove IPMI_CHECK_RESERVATION() macro ipmi: replace IPMI_ADD_RSP_DATA() macro with inline helpers ipmi: remove IPMI_CHECK_CMD_LEN() macro MAINTAINERS: machine core MAINTAINERS: Add an entry for virtio header files pc: acpi: clarify why possible LAPIC entries must be present in MADT pc: acpi: drop cpu->found_cpus bitmap pc: acpi: create Processor and Notify objects only for valid lapics pc: acpi: create MADT.lapic entries only for valid lapics pc: acpi: SRAT: create only valid processor lapic entries pc: acpi: cleanup qdev_get_machine() calls machine: introduce MachineClass.possible_cpu_arch_ids() hook pc: init pcms->apic_id_limit once and use it throughout pc.c pc: acpi: remove NOP assignment ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave2-6/+106
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-11vhost-user: remove useless is_server fieldMarc-André Lureau1-2/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11vhost-user: fix use after freeMarc-André Lureau1-1/+6
"name" is freed after visiting options, instead use the first NetClientState name. Adds a few assert() for clarifying and checking some impossible states. READ of size 1 at 0x602000000990 thread T0 #0 0x7f6b251c570c (/lib64/libasan.so.2+0x4770c) #1 0x5566dc380600 in qemu_find_net_clients_except net/net.c:824 #2 0x5566dc39bac7 in net_vhost_user_event net/vhost-user.c:193 #3 0x5566dbee862a in qemu_chr_be_event /home/elmarco/src/qemu/qemu-char.c:201 #4 0x5566dbef2890 in tcp_chr_disconnect /home/elmarco/src/qemu/qemu-char.c:2790 #5 0x5566dbef2d0b in tcp_chr_sync_read /home/elmarco/src/qemu/qemu-char.c:2835 #6 0x5566dbee8a99 in qemu_chr_fe_read_all /home/elmarco/src/qemu/qemu-char.c:295 #7 0x5566dc39b964 in net_vhost_user_watch net/vhost-user.c:180 #8 0x5566dc5a06c7 in qio_channel_fd_source_dispatch io/channel-watch.c:70 #9 0x7f6b1aa2ab87 in g_main_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3154 #10 0x7f6b1aa2b9cb in g_main_context_dispatch /home/elmarco/src/gnome/glib/glib/gmain.c:3769 #11 0x5566dc475ed4 in glib_pollfds_poll /home/elmarco/src/qemu/main-loop.c:212 #12 0x5566dc476029 in os_host_main_loop_wait /home/elmarco/src/qemu/main-loop.c:257 #13 0x5566dc476165 in main_loop_wait /home/elmarco/src/qemu/main-loop.c:505 #14 0x5566dbf08d31 in main_loop /home/elmarco/src/qemu/vl.c:1932 #15 0x5566dbf16783 in main /home/elmarco/src/qemu/vl.c:4646 #16 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) #17 0x5566dbbf5348 in _start (/home/elmarco/src/qemu/x86_64-softmmu/qemu-system-x86_64+0x3f9348) 0x602000000990 is located 0 bytes inside of 5-byte region [0x602000000990,0x602000000995) freed by thread T0 here: #0 0x7f6b2521666a in __interceptor_free (/lib64/libasan.so.2+0x9866a) #1 0x7f6b1aa332a4 in g_free /home/elmarco/src/gnome/glib/glib/gmem.c:189 #2 0x5566dc5f416f in qapi_dealloc_type_str qapi/qapi-dealloc-visitor.c:134 #3 0x5566dc5f3268 in visit_type_str qapi/qapi-visit-core.c:196 #4 0x5566dc5ced58 in visit_type_Netdev_fields /home/elmarco/src/qemu/qapi-visit.c:5936 #5 0x5566dc5cef71 in visit_type_Netdev /home/elmarco/src/qemu/qapi-visit.c:5960 #6 0x5566dc381a8d in net_visit net/net.c:1049 #7 0x5566dc381c37 in net_client_init net/net.c:1076 #8 0x5566dc3839e2 in net_init_netdev net/net.c:1473 #9 0x5566dc63cc0a in qemu_opts_foreach util/qemu-option.c:1112 #10 0x5566dc383b36 in net_init_clients net/net.c:1499 #11 0x5566dbf15d86 in main /home/elmarco/src/qemu/vl.c:4397 #12 0x7f6b180bb57f in __libc_start_main (/lib64/libc.so.6+0x2057f) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11vhost-user: verify that number of queues is less than MAX_QUEUE_NUMIlya Maximets1-2/+3
Fix QEMU crash when -netdev vhost-user,queues=n is passed with number of queues greater than MAX_QUEUE_NUM. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2016-03-10osdep: remove use of socket_error() from all codeDaniel P. Berrange1-11/+8
Now that QEMU wraps the Win32 sockets methods to automatically set errno upon failure, there is no reason for callers to use the socket_error() method. They can rely on accessing errno even on Win32. Remove all use of socket_error() from general code, leaving it as a static method in oslib-win32.c only. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-08net: check packet payload lengthPrasad J Pandit1-2/+8
While computing IP checksum, 'net_checksum_calculate' reads payload length from the packet. It could exceed the given 'data' buffer size. Add a check to avoid it. Reported-by: Liu Ling <liuling-it@360.cn> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08filter-buffer: Add status_changed callback processingzhanghailiang1-6/+28
While the status of filter-buffer changing from 'on' to 'off', it need to release all the buffered packets, and delete the related timer, while switch from 'off' to 'on', it need to resume the release packets timer. Here, we extract the process of setup timer into a new helper, which will be used in the new status_changed callback. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08filter: Add 'status' property for filter objectzhanghailiang1-0/+41
With this property, users can control if this filter is 'on' or 'off'. The default behavior for filter is 'on'. For some types of filters, they may need to react to status changing, So here, we introduced status changing callback/notifier for filter class. We will skip the disabled ('off') filter when delivering packets in net layer. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08net: netmap: probe netmap interface for virtio-net headerVincenzo Maffione1-21/+38
Previous implementation of has_ufo, has_vnet_hdr, has_vnet_hdr_len, etc. did not really probe for virtio-net header support for the netmap interface attached to the backend. These callbacks were correct for VALE ports, but incorrect for hardware NICs, pipes, monitors, etc. This patch fixes the implementation to work properly with all kinds of netmap ports. Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08net: simplify net_init_tap_one logicPaolo Bonzini1-2/+2
net_init_tap_one receives in vhostfdname a fd name from vhostfd= or vhostfds=, or NULL if there is no vhostfd=/vhostfds=. It is simpler to just check vhostfdname, than it is to check for vhostfd= or vhostfds=. This also calms down Coverity, which otherwise thinks that monitor_fd_param could dereference a NULL vhostfdname. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-08net: filter: correctly remove filter from the list during finalizationJason Wang1-1/+2
Qemu may crash when we want to add two filters on the same netdev but the initialization of second fails (e.g missing parameters): ./qemu-system-x86_64 -netdev user,id=un0 \ -object filter-buffer,id=f0,netdev=un0,interval=10 \ -object filter-buffer,id=f1,netdev=un0 Segmentation fault (core dumped) This is because we don't check whether or not the filter was in the list of netdev. This patch fixes this. Cc: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-03-04qapi-dealloc: Reduce use outside of generated codeEric Blake1-21/+10
No need to roll our own use of the dealloc visitors when we can just directly use the qapi_free_FOO() functions that do what we want in one line. In net.c, inline net_visit() into its remaining lone caller. After this patch, test-visitor-serialization.c is the only non-generated file that needs to use a dealloc visitor, because it is testing low level aspects of the visitor interface. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1456262075-3311-2-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-23all: Clean up includesPeter Maydell2-2/+0
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake2-8/+10
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake3-6/+6
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04net: Clean up includesPeter Maydell22-15/+22
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
2016-02-04net/filter: Fix the output information for command 'info network'zhanghailiang2-25/+29
The properties of netfilter object could be changed by 'qom-set' command, but the output of 'info network' command is not updated, because it got the old information through nf->info_str, it will not be updated while we change the value of netfilter's property. Here we split a helper function that could collect the output information for filter, and also remove the useless member 'info_str' from struct NetFilterState. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Yang Hongyang <hongyang.yang@easystack.cn> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net: always walk through filters in reverse if traffic is egressLi Zhijian2-7/+34
Previously, if we attach more than one filters for a single netdev, both ingress and egress traffic will go through net filters in same order like: ingress: netdev ->filter1 ->filter2 ->...filter[n] ->emulated device egress: emulated device ->filter1 ->filter2 ->...filter[n] ->netdev. This is against the natural feeling and will complicate filters configuration since in some scenes, we hope filters handle the egress traffic in a reverse order. For example, in colo-proxy (will be implemented later), we have a redirector filter and a colo-rewriter filter, we need the filter behave like: ingress(->)/egress(<-): chardev<->redirector<->colo-rewriter<->emulated device Since both buffer filter and dump do not require strict order of filters, this patch switches to always let egress traffic walk through net filters in reverse to simplify the possible filters configuration in the future. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net: netmap: use nm_open() to open netmap portsVincenzo Maffione1-65/+32
This patch simplifies the netmap backend code by means of the nm_open() helper function provided by netmap_user.h, which hides the details of open(), iotcl() and mmap() carried out on the netmap device. Moreover, the semantic of nm_open() makes it possible to open special netmap ports (e.g. pipes, monitors) and use special modes (e.g. host rings only, single queue mode, exclusive access). Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04net/slirp: Tell the users when they are using deprecated optionsThomas Huth1-0/+3
We don't want to support the legacy -tftp, -bootp, -smb and -net channel options forever. So let's start telling the users that they are deprecated and what option should be used instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-18qom: Change object property iterator API contractDaniel P. Berrange1-4/+3
Currently the ObjectProperty iterator API works as follows: ObjectPropertyIterator *iter; iter = object_property_iter_init(obj); while ((prop = object_property_iter_next(iter))) { ... } object_property_iter_free(iter); This has the benefit that the ObjectPropertyIterator struct can be opaque, but has the downside that callers need to explicitly call a free function. It is also not in keeping with iterator style used elsewhere in QEMU/GLib2. This patch changes the API to use stack allocation instead: ObjectPropertyIterator iter; object_property_iter_init(&iter, obj); while ((prop = object_property_iter_next(&iter))) { ... } Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [AF: Fused ObjectPropertyIterator struct with typedef] Signed-off-by: Andreas Färber <afaerber@suse.de>
2016-01-13error: Strip trailing '\n' from error string arguments (again)Markus Armbruster1-3/+3
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. Tracked down with the Coccinelle semantic patch from commit 312fd5f. Cc: Fam Zheng <famz@redhat.com> Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Changchun Ouyang <changchun.ouyang@intel.com> Cc: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2016-01-11Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/mjt/tags/pull-trivial-patches-2016-01-11' into staging trivial patches for 2016-01-11 # gpg: Signature made Mon 11 Jan 2016 08:39:32 GMT using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2016-01-11: hw/s390x: Remove superfluous return statements hw/core/qdev: Remove superfluous return statement hw/acpi: Remove superfluous return statement hw/ide: Remove superfluous return statements osdep.h: Include glib-compat.h in osdep.h rather than qemu-common.h scripts/checkpatch.pl: Don't allow special cases of unspaced operators PCI Bonito: QOMify and cleanup SH PCI Host: convert to realize() gt64120: convert to realize() Add missing syscall nrs. according to more recent Linux kernels hw/misc/edu: Convert to realize() configure: fix trace backend check xen/Makefile.objs: simplify crypto: Fix typo in example MAINTAINERS: Add the correct device_tree.h file iscsi: fix readcapacity error message net: convert qemu_log to error_report, fix message linux-user: enable sigaltstack for all architectures unicore32: convert get_sp_from_cpustate from macro to inline Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-11net: convert qemu_log to error_report, fix messagePaolo Bonzini1-1/+1
Ensure that the error is printed with the proper timestamp. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-01-11l2tpv3: fix cookie decodingAlexis Dambricourt1-1/+1
If a 32 bits l2tpv3 frame cookie MSB if set to 1, the cast to uint64_t cookie will spread 1 to the four most significant bytes. Then the condition (cookie != s->rx_cookie) becomes false. Signed-off-by: Alexis Dambricourt <alexis.dambricourt@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/filter: fix nf->netdev_id leakLi Zhijian1-0/+1
Cc: Jason Wang <jasowang@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-01-11net/dump: fix nfds->filename leakLi Zhijian1-0/+8
Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake1-2/+2
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-02vhost-user: verify that number of queues is non-zeroVictor Kaplansky1-0/+5
Fix QEMU crash when -netdev type=vhost-user,queues=n is passed with zero number of queues. Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2015-11-27tap-win32: disable broken async write pathAndrew Baumann1-10/+36
The code under the TUN_ASYNCHRONOUS_WRITES path makes two incorrect assumptions about the behaviour of the WriteFile API for overlapped file handles. First, WriteFile does not update the lpNumberOfBytesWritten parameter when the write completes asynchronously (the number of bytes written is known only when the operation completes). Second, the buffer shouldn't be touched (or freed) until the operation completes. This led to at least one bug where tap_win32_write returned zero bytes written, which in turn caused further writes ("receives") to be disabled for that device. This change disables the asynchronous write path, while keeping most of the code around in case someone sees value in resurrecting it. It also adds some conditional debug output, similar to the read path. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Acked-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-27tap-win32: skip unexpected nodes during registry enumerationAndrew Baumann1-1/+2
In order to find a named tap device, get_device_guid() enumerates children of HKLM\SYSTEM\CCS\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318} (aka NETWORK_CONNECTIONS_KEY). For each child, it then looks for a "Connection" subkey, but if this key doesn't exist, it aborts the entire search. This was observed to fail on at least one Windows 10 machine, where there is an additional child of NETWORK_CONNECTIONS_KEY (named "Descriptions"). Since registry enumeration doesn't guarantee any particular sort order, we should continue to search for matching children rather than aborting the search. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
2015-11-25vhost-user: set link down when the char device is closedWen Congyang1-1/+1
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-11-18net: Convert net filter code to use object property iteratorsDaniel P. Berrange1-1/+4
Stop directly accessing the Object::properties field data structure and instead use the formal object property iterator APIs. This insulates the code from future data structure changes in the Object struct. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.1 at 2024-11-20 04:38:39 +0000