| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit b84694defb added the CPU_DUMP_VPU to allow vector registers to be
logged by log_cpu_exec() in TCG. This flag was then used in commit
b227f6a8a7 to print RISC-V vector registers using this flag. Note that
this change was done in riscv_cpu_dump_state(), the cpu_dump_state()
callback for RISC-V, the same callback used in hmp_info_registers().
Back then we forgot to change hmp_info_registers(), and 'info registers'
isn't showing RISC-V vector registers as a result. No other target is
impacted since only RISC-V is using CPU_DUMP_VPU.
There's no reason to not show VPU regs in info_registers(), so add
CPU_DUMP_VPU to hmp_info_registers(). This will print vector registers
for all RISC-V machines and, as said above, has no impact in other
archs.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20250623145306.991562-1-dbarboza@ventanamicro.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Since the commit 3e6bed61 ("monitor: cleanup detection of qmp_dispatcher_co
shutting down"), coroutine pointer qmp_dispatcher_co is set to NULL upon
cleanup. If a QMP command is sent after monitor_cleanup() (e.g. after
shutdown), this may lead to SEGFAULT on aio_co_wake(NULL).
As mentioned in the comment inside monitor_cleanup(), the intention is to
allow incoming requests while shutting down, but simply leave them
without any response. Let's do exactly that, and if qmp_dispatcher_co
coroutine pointer has already been set to NULL, let's simply skip the
aio_co_wake() part.
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Link: https://lore.kernel.org/r/20250502214729.928380-2-andrey.drobyshev@virtuozzo.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert the existing includes with sed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In hmp_dumpdtb(), we print a message when the command succeeds. This
message is missing the trailing \n, so the HMP command prompt is
printed immediately after it. We also weren't capitalizing 'DTB', or
quoting the filename in the message. Fix these nits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250206151214.2947842-2-peter.maydell@linaro.org
|
|
We don't need the MemTxAttrs, so let's simply use the simpler function
variant.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250210084648.33798-7-david@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory.
include/qapi/qmp/dispatch.h corresponds mostly to qapi/qmp-registry.c.
Move and rename it to include/qapi/qmp-registry.h.
Now just qerror.h is left in include/qapi/qmp/. Since it's deprecated
& (slowly) getting eliminated anyway, it isn't worth moving.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-3-armbru@redhat.com>
|
|
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
|
|
This started as a clean-up to properly pass a Error handler to the
gdbserver_start so we could do the right thing for command line and
HMP invocations.
Now that we have cleaned up foreach_device_config_or_exit() in earlier
patches we can further simplify by it by passing &error_fatal instead
of checking the return value. Having a return value is still useful
for HMP though so tweak the return to use a simple bool instead.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20250116160306.1709518-11-alex.bennee@linaro.org>
|
|
This patch proposes a flag to maintain disk activation status globally. It
mostly rewrites disk activation mgmt for QEMU, including COLO and QMP
command xen_save_devices_state.
Backgrounds
===========
We have two problems on disk activations, one resolved, one not.
Problem 1: disk activation recover (for switchover interruptions)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When migration is either cancelled or failed during switchover, especially
when after the disks are inactivated, QEMU needs to remember re-activate
the disks again before vm starts.
It used to be done separately in two paths: one in qmp_migrate_cancel(),
the other one in the failure path of migration_completion().
It used to be fixed in different commits, all over the places in QEMU. So
these are the relevant changes I saw, I'm not sure if it's complete list:
- In 2016, commit fe904ea824 ("migration: regain control of images when
migration fails to complete")
- In 2017, commit 1d2acc3162 ("migration: re-active images while migration
been canceled after inactive them")
- In 2023, commit 6dab4c93ec ("migration: Attempt disk reactivation in
more failure scenarios")
Now since we have a slightly better picture maybe we can unify the
reactivation in a single path.
One side benefit of doing so is, we can move the disk operation outside QMP
command "migrate_cancel". It's possible that in the future we may want to
make "migrate_cancel" be OOB-compatible, while that requires the command
doesn't need BQL in the first place. This will already do that and make
migrate_cancel command lightweight.
Problem 2: disk invalidation on top of invalidated disks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is an unresolved bug for current QEMU. Link in "Resolves:" at the
end. It turns out besides the src switchover phase (problem 1 above), QEMU
also needs to remember block activation on destination.
Consider two continuous migration in a row, where the VM was always paused.
In that scenario, the disks are not activated even until migration
completed in the 1st round. When the 2nd round starts, if QEMU doesn't
know the status of the disks, it needs to try inactivate the disk again.
Here the issue is the block layer API bdrv_inactivate_all() will crash a
QEMU if invoked on already inactive disks for the 2nd migration. For
detail, see the bug link at the end.
Implementation
==============
This patch proposes to maintain disk activation with a global flag, so we
know:
- If we used to inactivate disks for migration, but migration got
cancelled, or failed, QEMU will know it should reactivate the disks.
- On incoming side, if the disks are never activated but then another
migration is triggered, QEMU should be able to tell that inactivate is
not needed for the 2nd migration.
We used to have disk_inactive, but it only solves the 1st issue, not the
2nd. Also, it's done in completely separate paths so it's extremely hard
to follow either how the flag changes, or the duration that the flag is
valid, and when we will reactivate the disks.
Convert the existing disk_inactive flag into that global flag (also invert
its naming), and maintain the disk activation status for the whole
lifecycle of qemu. That includes the incoming QEMU.
Put both of the error cases of source migration (failure, cancelled)
together into migration_iteration_finish(), which will be invoked for
either of the scenario. So from that part QEMU should behave the same as
before. However with such global maintenance on disk activation status, we
not only cleanup quite a few temporary paths that we try to maintain the
disk activation status (e.g. in postcopy code), meanwhile it fixes the
crash for problem 2 in one shot.
For freshly started QEMU, the flag is initialized to TRUE showing that the
QEMU owns the disks by default.
For incoming migrated QEMU, the flag will be initialized to FALSE once and
for all showing that the dest QEMU doesn't own the disks until switchover.
That is guaranteed by the "once" variable.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2395
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241206230838.1111496-7-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
As the comment says, the activation of disks is for the case where
migration has completed, rather than when QEMU is still during
migration (RUN_STATE_INMIGRATE).
Move the code over to reflect what the comment is describing.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20241206230838.1111496-3-peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
|
|
BLOCK_IO_ERROR events comes from guest, so we must throttle them.
We still want per-device throttling, so let's use device id as a key.
Signed-off-by: Leonid Kaplan <xeor@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20241002151806.592469-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is an experiment to further reduce the amount we throw into the
exec headers. It might not be as useful as I initially thought because
just under half of the users also need gdbserver_start().
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240620152220.2192768-3-alex.bennee@linaro.org>
|
|
We're about to enable the use of O_DIRECT in the migration code and
due to the alignment restrictions imposed by filesystems we need to
make sure the flag is only used when doing aligned IO.
The migration will do parallel IO to different regions of a file, so
we need to use more than one file descriptor. Those cannot be obtained
by duplicating (dup()) since duplicated file descriptors share the
file status flags, including O_DIRECT. If one migration channel does
unaligned IO while another sets O_DIRECT to do aligned IO, the
filesystem would fail the unaligned operation.
The add-fd QMP command along with the fdset code are specifically
designed to allow the user to pass a set of file descriptors with
different access flags into QEMU to be later fetched by code that
needs to alternate between those flags when doing IO.
Extend the fdset matching to behave the same with the O_DIRECT flag.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
I'm keeping the EACCES because callers expect to be able to look at
errno.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Remove fds right away instead of setting the ->removed flag. We don't
need the extra complexity of having a cleanup function reap the
removed entries at a later time.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
monitor_fdsets_cleanup() currently has three responsibilities:
1- Remove the fds that have been marked for removal(->removed=true) by
qmp_remove_fd(). This is overly complicated, but ok.
2- Remove any file descriptors that have been passed into QEMU and
never duplicated[1,2]. A file descriptor without duplicates
indicates that no part of QEMU has made use of it. This is
problematic because the current implementation does it only if the
guest is not running and the monitor is closed.
3- Remove/free fdsets that have become empty due to the above
removals. This is ok.
The scenario described in (2) is starting to show some cracks now that
we're trying to consume fds from the migration code:
- Doing cleanup every time the last monitor connection closes works to
reap unused fds, but also has the side effect of forcing the
management layer to pass the file descriptors again in case of a
disconnect/re-connect, if that happened to be the only monitor
connection.
Another side effect is that removing an fd with qmp_remove_fd() is
effectively delayed until the last monitor connection closes.
The usage of mon_refcount is also problematic because it's racy.
- Checking runstate_is_running() skips the cleanup unless the VM is
running and avoids premature cleanup of the fds, but also has the
side effect of blocking the legitimate removal of an fd via
qmp_remove_fd() if the VM happens to be in another state.
This affects qmp_remove_fd() and qmp_query_fdsets() in particular
because requesting a removal at a bad time (guest stopped) might
cause an fd to never be removed, or to be removed at a much later
point in time, causing the query command to continue showing the
supposedly removed fd/fdset.
Note that file descriptors that *have* been duplicated are owned by
the code that uses them and will be removed after qemu_close() is
called. Therefore we've decided that the best course of action to
avoid the undesired side-effects is to stop managing non-duplicated
file descriptors.
1- efb87c1697 ("monitor: Clean up fd sets on monitor disconnect")
2- ebe52b592d ("monitor: Prevent removing fd from set during init")
Reviewed-by: Peter Xu <peterx@redhat.com>
[fix logic mistake: s/fdset_free/fdset_free_if_empty]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Introduce new functions to remove and free no longer used fds and
fdsets.
We need those to decouple the remove/free routines from
monitor_fdset_cleanup() which will go away in the next patches.
The new functions:
- monitor_fdset_free/_if_empty() will be used when a monitor
connection closes and when an fd is removed to cleanup any fdset
that is now empty.
- monitor_fdset_fd_free() will be used to remove one or more fds that
have been explicitly targeted by qmp_remove_fd().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Those functions are not needed, one remove function should already
work. Clean it up.
Here the code doesn't really care about whether we need to keep that dupfd
around if close() failed: when that happens something got very wrong,
keeping the dup_fd around the fdsets may not help that situation so far.
Cc: Dr. David Alan Gilbert <dave@treblig.org>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[add missing return statement, removal during traversal is not safe]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
This is a counterpart to the HMP "info pic" command. It is being
added with an "x-" prefix because this QMP command is intended as an
adhoc debugging tool and will thus not be modelled in QAPI as fully
structured data, nor will it have long term guaranteed stability.
The existing HMP command is rewritten to call the QMP command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-3-philmd@linaro.org>
|
|
Replace Monitor API by HumanReadableText one (see commit f2de406f29
"docs/devel: document expectations for QAPI data modelling for QMP"
for rationale).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20240610063518.50680-2-philmd@linaro.org>
|
|
Introduce a new Kconfig symbol, CONFIG_DEVICE_TREE, that specifies whether
to include the common device tree code in system/device_tree.c and to
link to libfdt. For now, include it unconditionally if libfdt is
available.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Removal of deprecated code
- Remove the Nios II target and hardware
- Remove pvrdma device and rdmacm-mux helper
- Remove GlusterFS RDMA protocol handling
- Update Sriram Yagnaraman mail address
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmYpE0YACgkQ4+MsLN6t
# wN5PIA//egomANjRHAUAf9tdjljgT/JR49ejM7iInyxspR/xaiq0TlP2kP6aDNps
# y1HAWBwfj5lGxeMgQ1mSKJGka3v2AIPWb7RbNT+9AaiWHv+sx5OrEytozUsFHLo8
# gSgRQocq0NY2a9dPbtkDqfbmq/rkCC7wgZzwroHsyOdiqYsWDKPJFleBDMjGmEaf
# colhiDmhUPgvE3NNpwfEVNh/2SzxUxY8k5FHal6qij5z56ZqBglgnziDZEvGVCZ1
# uF4Hca/kh7TV2MVsdStPbGWZYDhJ/Np/2FnRoThD1Hc4qq8d/SH997m2F94tSOud
# YeH54Vp5lmCeYgba5y8VP0ZPx/b9XnTtLvKggNdoqB+T2LBWPRt8kehqoaxvammF
# ALzbY/t2vUxL6nIVbosOaTyqVOXvynk3/Js5S0jbnlu+vP2WvvFEzfYKIs2DIA8w
# z56o/rG4KfyxF0aDB+CvLNwtJS8THqeivPqmYoKTdN9FPpN2RyBNLITrKo389ygF
# 3oWy3+xsKGIPdNFY0a4l25xntqWNhND89ejzyL9M6G1cQ9RdEmTIUGTrinPQQmfP
# oHIJMBeTdj7EqPL4LB3BR/htw9U5PobeMNYKFsRkS39PjGDqba5wbIdk3w5/Rcxa
# s/PKdspDKWPwZ5jhcLD0qxAGJFnqM2UFjPo+U8qyI3RXKXFAn0E=
# =c8Aj
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 24 Apr 2024 07:12:22 AM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'housekeeping-20240424' of https://github.com/philmd/qemu:
block/gluster: Remove deprecated RDMA protocol handling
hw/rdma: Remove deprecated pvrdma device and rdmacm-mux helper
hw/timer: Remove the ALTERA_TIMER model
target/nios2: Remove the deprecated Nios II target
MAINTAINERS: Update Sriram Yagnaraman mail address
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The whole RDMA subsystem was deprecated in commit e9a54265f5
("hw/rdma: Deprecate the pvrdma device and the rdma subsystem")
released in v8.2.
Remove:
- PVRDMA device
- generated vmw_pvrdma/ directory from linux-headers
- rdmacm-mux tool from contrib/
Cc: Yuval Shaia <yuval.shaia.ml@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20240328130255.52257-2-philmd@linaro.org>
|
|
QMP is irrelevant for user emulation. Extract the code
related to QMP in a different source file, which won't
be build for user emulation binaries. This avoid pulling
pointless code.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240404194757.9343-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240408155330.522792-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In qemu monitor mode, when we use gpa2hva command to print the host
virtual address corresponding to a guest physical address, if the gpa is
not in RAM, the error message is below:
(qemu) gpa2hva 0x750000000
Memory at address 0x750000000is not RAM
A space is missed between '0x750000000' and 'is'.
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Fixes: e9628441df ("hmp: gpa2hva and gpa2hpa hostaddr command")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Message-ID: <20240319021610.2423844-1-ruansy.fnst@fujitsu.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Include "exec/memory.h" in order to avoid:
monitor/hmp-cmds-target.c:263:10: error: call to undeclared function 'memory_region_is_ram';
ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
if (!memory_region_is_ram(mrs.mr) && !memory_region_is_romd(mrs.mr)) {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not
polled during nested event loops. The coroutine currently reschedules
itself in the main loop's qemu_aio_context AioContext, which is polled
during nested event loops. One known problem is that QMP device-add
calls drain_call_rcu(), which temporarily drops the BQL, leading to all
sorts of havoc like other vCPU threads re-entering device emulation code
while another vCPU thread is waiting in device emulation code with
aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the
iohandler AioContext. This avoids trouble with nested event loops. His
original idea was to move coroutine rescheduling to
monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch()
because we don't know if the QMP handler needs to run in coroutine
context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have
been nicer since it's associated with the monitor implementation and not
as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of
QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org
Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985
Buglink: https://issues.redhat.com/browse/RHEL-17369
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Improve
(qemu) sync-profile of
Error: Invalid parameter 'of'
to
Error: invalid parameter 'of', expecting 'on', 'off', or 'reset'
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-3-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
|
|
Used by the hv-balloon driver for (optional) guest memory status reports.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
|
|
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
GLib recommend to use G_SOURCE_REMOVE / G_SOURCE_CONTINUE
for GSourceFunc callbacks. Our FEWatchFunc is a GSourceFunc
returning such value. Use such definitions which are
"more memorable" [*].
[*] https://docs.gtk.org/glib/callback.SourceFunc.html#return-value
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230705133139.54419-5-philmd@linaro.org>
|
|
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of relying on magic memory barriers, document the pattern that
is being used. It is the one based on Dekker's algorithm, and in this
case it is embodied as follows:
enqueue request; sleeping = true;
smp_mb(); smp_mb();
if (sleeping) kick(); if (!have a request) yield();
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This makes it possible to turn qmp_dispatcher_co_busy into a static
variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use a continue statement so that "after going to sleep" is treated the same
way as "after processing a request". Pull the monitor_lock critical
section out of monitor_qmp_requests_pop_any_with_lock() and protect
qmp_dispatcher_co_shutdown with the monitor_lock.
The two changes are complex to separate because monitor_qmp_dispatcher_co()
previously had a complicated logic to check for shutdown both before
and after going to sleep.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Instead of overloading qmp_dispatcher_co_busy, make the coroutine
pointer NULL. This will make things break spectacularly if somebody
tries to start a request after monitor_cleanup().
AIO_WAIT_WHILE_UNLOCKED() does not need qatomic_mb_read(), because
the macro contains all the necessary memory barriers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Clean up monitor_event to just use monitor_suspend/monitor_resume,
using mon->mux_out to protect against incorrect nesting (especially
on startup).
The only remaining case of reading suspend_cnt is in the can_read
callback, which is just advisory and can use qatomic_read.
As an extra benefit, mux_out is now simply protected by mon_lock.
Also, moving the prompt to the beginning of the main loop removes
it from the output in some error cases where QEMU does not actually
start successfully. It is not a full fix and it would be nice to
also remove the monitor heading, but this is already a small (though
unintentional) improvement.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow flushing and printing to the monitor while mon->mon_lock is
held. This will help cleaning up the locking of mon->mux_out and
mon->suspend_cnt.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move monitor_resume()'s call to readline_show_prompt() outside the
potentially locked section. Reuse the existing monitor_accept_input()
bottom half for this purpose.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
monitor_cleanup() is called from the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks
the AioContext and the latter's assertion that we're in the main loop
succeeds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-7-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The HMP monitor runs in the main loop thread. Calling
AIO_WAIT_WHILE(qemu_get_aio_context(), ...) from the main loop thread is
equivalent to AIO_WAIT_WHILE_UNLOCKED(NULL, ...) because neither unlocks
the AioContext and the latter's assertion that we're in the main loop
succeeds.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230309190855.414275-6-stefanha@redhat.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently, the function will simply fail if ancillary fds are not
provided, for ex on unsupported platforms.
This changes the failure from:
{"error": {"class": "GenericError", "desc": "No file descriptor
supplied via SCM_RIGHTS"}}
to:
{"error": {"class": "CommandNotFound", "desc": "The command getfd
has not been found"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
