aboutsummaryrefslogtreecommitdiff
path: root/monitor
AgeCommit message (Collapse)AuthorFilesLines
2020-10-09hmp: Add support for coroutine command handlersKevin Wolf2-5/+33
Often, QMP command handlers are not only called to handle QMP commands, but also from a corresponding HMP command handler. In order to give them a consistent environment, optionally run HMP command handlers in a coroutine, too. The implementation is a lot simpler than in QMP because for HMP, we still block the VM while the coroutine is running. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20201005155855.256490-11-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Move dispatcher to a coroutineKevin Wolf3-40/+143
This moves the QMP dispatcher to a coroutine and runs all QMP command handlers that declare 'coroutine': true in coroutine context so they can avoid blocking the main loop while doing I/O or waiting for other events. For commands that are not declared safe to run in a coroutine, the dispatcher drops out of coroutine context by calling the QMP command handler from a bottom half. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201005155855.256490-10-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Make current monitor a per-coroutine propertyKevin Wolf2-9/+29
This way, a monitor command handler will still be able to access the current monitor, but when it yields, all other code code will correctly get NULL from monitor_cur(). This uses a hash table to map the coroutine pointer to the current monitor of that coroutine. Outside of coroutine context, we associate the current monitor with the leader coroutine of the current thread. Approaches to implement some form of coroutine local storage directly in the coroutine core code have been considered and discarded because they didn't end up being much more generic than the hash table and their performance impact on coroutines not using coroutine local storage was unclear. As the block layer uses a coroutine per I/O request, this is a fast path and we have to be careful. It's safest to just stay out of this path with code only used by the monitor. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-8-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Call monitor_set_cur() only in qmp_dispatch()Kevin Wolf1-7/+2
The correct way to set the current monitor for a coroutine handler will be different than for a blocking handler, so monitor_set_cur() needs to be called in qmp_dispatch(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-7-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09qmp: Assert that no other monitor is activeKevin Wolf1-1/+4
monitor_qmp_dispatch() is never supposed to be called in the context of another monitor, so assert that monitor_cur() is NULL instead of saving and restoring it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-6-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09hmp: Update current monitor only in handle_hmp_command()Kevin Wolf2-10/+5
The current monitor is updated relatively early in the command handling code even though only the command handler actually needs it. The current monitor will become coroutine-local later, so we can only update it when we know in which coroutine the command will be exectued. Move it to handle_hmp_command() where this information will be available. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-5-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Use getter/setter functions for cur_monKevin Wolf6-19/+40
cur_mon really needs to be coroutine-local as soon as we move monitor command handlers to coroutines and let them yield. As a first step, just remove all direct accesses to cur_mon so that we can implement this in the getter function later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_get_cpu_index()Kevin Wolf2-11/+11
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_get_cpu_index(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-3-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09monitor: Add Monitor parameter to monitor_set_cpu()Kevin Wolf2-6/+6
Most callers actually don't have to rely on cur_mon, but already know for which monitor they call monitor_set_cpu(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20201005155855.256490-2-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract PCI commands to 'pci.json'Philippe Mathieu-Daudé1-0/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the PCI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-9-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Extract ACPI commands to 'acpi.json'Philippe Mathieu-Daudé1-0/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Extracting the ACPI commands to their own schema reduces the size of the qapi-misc* headers generated, and pulls less QAPI-generated code into user-mode. Suggested-by: Markus Armbruster <armbru@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-8-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé1-0/+1
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-25monitor: Use LOCK_GUARD macrosDr. David Alan Gilbert1-30/+14
Use the lock guard macros in monitor/misc.c - saves a lot of unlocks in error paths, and the occasional goto. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200922095741.101911-1-dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi3-7/+7
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-16monitor: simplify functions for getting a dup'd fdset entryDaniel P. Berrangé1-33/+25
Currently code has to call monitor_fdset_get_fd, then dup the return fd, and then add the duplicate FD back into the fdset. This dance is overly verbose for the caller and introduces extra failure modes which can be avoided by folding all the logic into monitor_fdset_dup_fd_add and removing monitor_fdset_get_fd entirely. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-08configure: do not include dependency flags in QEMU_CFLAGS and LIBSPaolo Bonzini1-1/+1
All Meson executables should specify their dependencies explicitly, either directly or indirectly via declare_dependency. Makefiles instead did not propagate dependencies correctly from static libraries, for example. Therefore, flags for dependencies need not be included in QEMU_CFLAGS. LIBS is not used at all, so drop that one as well. In a few cases the dependencies were not yet specified, so add them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21migration: Add block-bitmap-mapping parameterMax Reitz1-0/+30
This migration parameter allows mapping block node names and bitmap names to aliases for the purpose of block dirty bitmap migration. This way, management tools can use different node and bitmap names on the source and destination and pass the mapping of how bitmaps are to be transferred to qemu (on the source, the destination, or even both with arbitrary aliases in the migration stream). While touching this code, fix a bug where bitmap names longer than 255 bytes would fail an assertion in qemu_put_counted_string(). Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20200820150725.68687-2-mreitz@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-21meson: convert common QMP bits for qemu and qemu-storage-daemonPaolo Bonzini2-6/+9
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini1-0/+1
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-13monitor/misc: Remove unused "chardev/char-mux.h" includePhilippe Mathieu-Daudé1-1/+0
monitor/misc.c never required "chardev/char-mux.h", remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200423202112.644-2-philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-10qapi: Smooth another visitor error checking patternMarkus Armbruster1-13/+6
Convert visit_type_FOO(v, ..., &ptr, &err); ... if (err) { ... } to visit_type_FOO(v, ..., &ptr, errp); ... if (!ptr) { ... } for functions that set @ptr to non-null / null on success / error. Eliminate error_propagate() that are now unnecessary. Delete @err that are now unused. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster1-2/+1
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10hmp: Eliminate a variable in hmp_migrate_set_parameter()Markus Armbruster1-6/+2
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-17-armbru@redhat.com>
2020-07-03virtio-pci: Send qapi events when the virtio-mem size changesDavid Hildenbrand1-0/+1
Let's register the notifier and trigger the qapi event with the right device id. MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a memory device level. Don't unregister the notifier (we neither have finalize() nor unrealize() for VirtIOPCIProxy, so it's not that simple to do it) - both devices are expected to vanish at the same time. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-18-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03hmp: Handle virtio-mem when printing memory device infoDavid Hildenbrand1-0/+16
Print the memory device info just like for other memory devices. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20200626072248.78761-14-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-17monitor/hmp-cmds: improvements for the 'info migrate'Mao Zhongyi1-3/+3
When running: (qemu) info migrate globals: store-global-state: on only-migratable: off ... xbzrle transferred: 640892 kbytes xbzrle pages: 16645936 pages xbzrle cache miss: 1525426 xbzrle cache miss rate: 0.09 xbzrle encoding rate: 91.42 xbzrle overflow: 40896 ... compression pages: 377710 pages compression busy: 0 compression busy rate: 0.00 compressed size: 463169457 compression rate: 3.33 Add units for 'xbzrle cache miss' and 'compressed size', make it easier to read. Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-8-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: add 'goto end' to reduce duplicate code.Mao Zhongyi1-4/+4
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-7-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()Mao Zhongyi1-3/+2
hmp_handle_error() does Error check internally. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200603080904.997083-6-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' ↵Mao Zhongyi1-1/+4
fails Although 'migrate_set_downtime' has been deprecated and replaced with 'migrate_set_parameter downtime_limit', it has not been completely eliminated, possibly due to compatibility with older versions. I think as long as this old parameter is running, we should report appropriate message when something goes wrong, not be silent. before: (qemu) migrate_set_downtime -1 (qemu) after: (qemu) migrate_set_downtime -1 Error: Parameter 'downtime_limit' expects an integer in the range of 0 to 2000 seconds Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200603080904.997083-5-maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17monitor/hmp-cmds: add units for migrate_parametersMao Zhongyi1-3/+3
When running: (qemu) info migrate_parameters announce-initial: 50 ms announce-max: 550 ms announce-step: 100 ms compress-wait-thread: on ... max-bandwidth: 33554432 bytes/second downtime-limit: 300 milliseconds x-checkpoint-delay: 20000 ... xbzrle-cache-size: 67108864 add units for the parameters 'x-checkpoint-delay' and 'xbzrle-cache-size', it's easier to read, also move milliseconds to ms to keep the same style. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200603080904.997083-4-maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-12Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-1/+2
* Miscellaneous fixes and feature enablement (many) * SEV refactoring (David) * Hyper-V initial support (Jon) * i386 TCG fixes (x87 and SSE, Joseph) * vmport cleanup and improvements (Philippe, Liran) * Use-after-free with vCPU hot-unplug (Nengyuan) * run-coverity-scan improvements (myself) * Record/replay fixes (Pavel) * -machine kernel_irqchip=split improvements for INTx (Peter) * Code cleanups (Philippe) * Crash and security fixes (PJP) * HVF cleanups (Roman) # gpg: Signature made Fri 12 Jun 2020 16:57:04 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (116 commits) target/i386: Remove obsolete TODO file stubs: move Xen stubs to accel/ replay: fix replay shutdown for console mode exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h' hw/usb: Move device-specific declarations to new 'hcd-musb.h' header exec/memory: Remove unused MemoryRegionMmio type checkpatch: reversed logic with acpi test checks target/i386: sev: Unify SEVState and SevGuestState target/i386: sev: Remove redundant handle field target/i386: sev: Remove redundant policy field target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields target/i386: sev: Partial cleanup to sev_state global target/i386: sev: Embed SEVState in SevGuestState target/i386: sev: Rename QSevGuestInfo target/i386: sev: Move local structure definitions into .c file target/i386: sev: Remove unused QSevGuestInfoClass xen: fix build without pci passthrough i386: hvf: Drop HVFX86EmulatorState i386: hvf: Move mmio_buf into CPUX86State i386: hvf: Move lazy_flags into CPUX86State ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/i386/acpi-build.c
2020-06-12pci: Display PCI IRQ pin in "info pci"Peter Xu1-1/+2
Sometimes it would be good to be able to read the pin number along with the IRQ number allocated. Since we'll dump the IRQ number, no reason to not dump the pin information. For example, the vfio-pci device will overwrite the pin with the hardware pin number. It would be nice to know the pin number of one assigned device from QMP/HMP. CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> CC: Julia Suvorova <jusual@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20200317195908.283800-1-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com>
2020-06-10memory: Make 'info mtree' not display disabled regions by defaultPhilippe Mathieu-Daudé1-1/+2
We might have many disabled memory regions, making the 'info mtree' output too verbose to be useful. Remove the disabled regions in the default output, but allow the monitor user to display them using the '-D' option. Before: (qemu) info mtree memory-region: system 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff 0000000000000000-ffffffffffffffff (prio -1, i/o): pci 00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem 00000000000c0000-00000000000dffff (prio 1, rom): pc.rom 00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff 00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios 00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled] 00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled] 00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled] 00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled] 00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled] 00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled] 00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled] 00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled] 00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled] 00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled] 00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled] 00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff 00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled] 00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled] 00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff 00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic 00000000fed00000-00000000fed003ff (prio 0, i/o): hpet 00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi After: (qemu) info mtree memory-region: system 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff 0000000000000000-ffffffffffffffff (prio -1, i/o): pci 00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem 00000000000c0000-00000000000dffff (prio 1, rom): pc.rom 00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff 00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios 00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff 00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff 00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff 00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff 00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff 00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff 00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff 00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff 00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff 00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff 00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff 00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff 00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff 00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff 00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic 00000000fed00000-00000000fed003ff (prio 0, i/o): hpet 00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi The old behavior is preserved using 'info mtree -D'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15various: Remove unnecessary OBJECT() castPhilippe Mathieu-Daudé1-2/+1
The OBJECT() macro is defined as: #define OBJECT(obj) ((Object *)(obj)) Remove the unnecessary OBJECT() casts when we already know the pointer is of Object type. Patch created mechanically using spatch with this script: @@ typedef Object; Object *o; @@ - OBJECT(o) + o Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200512070020.22782-3-f4bug@amsat.org> [Trivial rebase conflict in hw/s390x/sclp.c resolved]
2020-05-15qom: Clean up inconsistent use of gchar * vs. char *Markus Armbruster1-1/+1
Uses of gchar * in qom/object.h: * ObjectProperty member @name Functions that take a property name argument all use char *. Change the member to match. * ObjectProperty member @type Functions that take a property type argument or return it all use char *. Change the member to match. * ObjectProperty member @description Functions that take a property description argument all use char *. Change the member to match. * object_resolve_path_component() parameter @part Path components are property names. Most callers pass char * arguments. Change the parameter to match. Adjust the few callers that pass gchar * to pass char *. * Return value of object_get_canonical_path_component(), object_get_canonical_path() Most callers convert their return values right back to char *. Change the return value to match. Adjust the few callers where that would add a conversion to gchar * to use char * instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-3-armbru@redhat.com>
2020-05-07migration/xbzrle: add encoding rateWei Wang1-0/+2
Users may need to check the xbzrle encoding rate to know if the guest memory is xbzrle encoding-friendly, and dynamically turn off the encoding if the encoding rate is low. Signed-off-by: Yi Sun <yi.y.sun@intel.com> Signed-off-by: Wei Wang <wei.w.wang@intel.com> Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration/throttle: Add cpu-throttle-tailslow migration parameterKeqian Zhu1-0/+8
At the tail stage of throttling, the Guest is very sensitive to CPU percentage while the @cpu-throttle-increment is excessive usually at tail stage. If this parameter is true, we will compute the ideal CPU percentage used by the Guest, which may exactly make the dirty rate match the dirty rate threshold. Then we will choose a smaller throttle increment between the one specified by @cpu-throttle-increment and the one generated by ideal CPU percentage. Therefore, it is compatible to traditional throttling, meanwhile the throttle increment won't be excessive at tail stage. This may make migration time longer, and is disabled by default. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07migration: move the units of migrate parameters from milliseconds to msMao Zhongyi1-4/+4
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <474bb6cf67defb8be9de5035c11aee57a680557a.1585641083.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07monitor/hmp-cmds: add hmp_handle_error() for hmp_migrate_set_speed()Mao Zhongyi1-1/+4
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <305323f835436023c53d759f5ab18af3ec874183.1585641083.git.maozhongyi@cmss.chinamobile.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-04lockable: replaced locks with lock guard macros where appropriateDaniel Brodsky1-3/+1
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets - replaced result with QEMU_LOCK_GUARD if all unlocks at function end - replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-04-30qapi: Disallow qmp_marshal_FOO(NULL, ...)Markus Armbruster1-1/+4
For QMP commands without arguments, gen_marshal() laboriously generates a qmp_marshal_FOO() that copes with null @args. Turns there's just one caller that passes null instead of an empty QDict. Adjust that caller, and simplify gen_marshal(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200424084338.26803-15-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-30qapi: Only input visitors can actually failMarkus Armbruster1-1/+2
The previous few commits have made this more obvious, and removed the one exception. Time to clarify the documentation, and drop dead error checking. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200424084338.26803-13-armbru@redhat.com>
2020-03-25migration: use "" instead of (null) for tls-authzMao Zhongyi1-2/+2
run: (qemu) info migrate_parameters announce-initial: 50 ms ... announce-max: 550 ms multifd-compression: none xbzrle-cache-size: 4194304 max-postcopy-bandwidth: 0 tls-authz: '(null)' Migration parameter 'tls-authz' is used to provide the QOM ID of a QAuthZ subclass instance that provides the access control check, default is NULL. But the empty string is not a valid object ID, so use "" instead of the default. Although it will fail when lookup an object with ID "", it is harmless, just consistent with tls_creds. As a bonus, this patch also fixed the bad indentation on the last line and removed 'has_tls_authz' redundant check in 'hmp_info_migrate_parameters'. Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25hmp/vnc: Fix info vnc list leakDr. David Alan Gilbert1-2/+3
We're iterating the list, and then freeing the iteration pointer rather than the list head. Fixes: 0a9667ecdb6d ("hmp: Update info vnc") Reported-by: Coverity (CID 1421932) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200323120822.51266-1-dgilbert@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25xbzrle: update xbzrle docMao Zhongyi1-1/+1
Add new parameter description, also: 1. Remove unsociable space. 2. Nit picking: s/two/2 in report Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25hmp-cmd: fix a missing_break warningPan Nengyuan1-0/+1
This fix coverity issues 94417686: 1260 break; CID 94417686: (MISSING_BREAK) 1261. unterminated_case: The case for value "MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD" is not terminated by a 'break' statement. 1261 case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD: 1262 p->has_throttle_trigger_threshold = true; 1263 visit_type_int(v, param, &p->throttle_trigger_threshold, &err); 1264 case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL: Fixes: dc14a470763c96fd9d360e1028ce38e8c3613a77 Fixes: Coverity (CID 1421950) Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com> Message-Id: <20200318071620.59748-1-pannengyuan@huawei.com> Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-17net: Track netdevs in NetClientState rather than QemuOptEric Blake1-3/+1
As mentioned in the previous patch, our use of QemuOpt group "netdev" has two purposes: collect the CLI arguments, and serve as a witness for monitor hotplug actions. As the latter didn't use anything but an id, it felt rather unclean to have to touch QemuOpts at all when going through QMP, so let's instead track things with a bool field in NetClientState. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317201711.322764-3-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17net: Complete qapi-fication of netdev_addEric Blake1-2/+0
We've had all the required pieces for doing a type-safe representation of netdev_add as a flat union for quite some time now (since 0e55c381f6 in v2.7.0, released in 2016), but did not make the final switch to using it because of concern about whether a command-line regression in accepting "1" in place of 1 for integer arguments would be problematic. Back then, we did not have the deprecation cycle to allow us to make progress. But now that we have waited so long, other problems have crept in: for example, our desire to add qemu-storage-daemon is hampered by the inability to express net objects, and we are unable to introspect what we actually accept. Additionally, our round-trip through QemuOpts silently eats any argument that expands to an array, rendering dnssearch, hostfwd, and guestfwd useless through QMP: {"execute": "netdev_add", "arguments": { "id": "netdev0", "type": "user", "dnssearch": [ { "str": "8.8.8.8" }, { "str": "8.8.4.4" } ]}} So without further ado, let's turn on proper QAPI. netdev_add() was a trivial wrapper around net_client_init(), which did a few steps prior to calling net_client_init1(); with this patch, we now skip directly to net_client_init1(). In addition to fixing array parameters, the following additional differences occur: - {"execute": "netdev_add", "arguments": {"type": "help"}} no longer attempts to print help to stdout and exit. Bug fix, broken in 547203ead4 'net: List available netdevs with "-netdev help"', v2.12.0. - {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }} no longer attempts to desugar the undocumented ipv6-net magic string into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses", v2.6.0. - {'execute':'netdev_add', 'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}} {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}} Used to succeed: since our command line treats everything as strings, our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost the original typing and turned everything into a string; now that we skip the QemuOpts, the JSON input has to match the exact QAPI type. But this stricter QMP is desirable, and introspection is sufficient for any affected applications to make sure they use it correctly. In qmp_netdev_add(), we still have to create a QemuOpts object so that qmp_netdev_del() will be able to remove a hotplugged network device; but the opts->head remains empty since we now manage all parsing through the QAPI object rather than QemuOpts; a separate patch will address the abuse of QemuOpts as a witness for whether a NetClientState is a netdev. In the meantime, our argument that we are okay requires auditing all uses of option group "netdev": - qemu_netdev_opts: option group definition, empty .desc[] - CLI (CLI netdev parsing ends before monitors start, so while monitors can mess with CLI netdevs, CLI cannot mess with monitor netdevs): - main() case QEMU_OPTION_netdev: store CLI definition - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig: similar, dealing only with CLI - net_init_clients(): Pass CLI to net_client_init() - Monitor: - hmp_netdev_add(): straightforward parse into net_client_init() - qmp_netdev_add(): subject of this patch, used to add full object to option group, now just adds bare-bones id - qmp_netdev_del(), netdev_del_completion(): check the option group solely for id, as a 'is this a netdev' predicate Reported-by: Alex Kirillov <lekiravi@yandex-team.ru> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200317201711.322764-2-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message typo fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17qmp: constify QmpCommand and listMarc-André Lureau2-2/+2
Since 0b69f6f72ce47a37a749b056b6d5ec64c61f11e8 "qapi: remove qmp_unregister_command()", the command list can be declared const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com> Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com> [Rebased] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-13migration/throttle: Add throttle-trig-thres migration parameterKeqian Zhu1-0/+7
Currently, if the bytes_dirty_period is more than the 50% of bytes_xfer_period, we start or increase throttling. If we make this percentage higher, then we can tolerate higher dirty rate during migration, which means less impact on guest. The side effect of higher percentage is longer migration time. We can make this parameter configurable to switch between mig- ration time first or guest performance first. The default value is 50 and valid range is 1 to 100. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.1 at 2024-11-04 18:24:04 +0000