aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2020-11-09block: Move bdrv_drain_all_end_quiesce() to block_int.hGreg Kurz2-6/+9
This function is really an internal helper for bdrv_close(). Update its doc comment to make this clear and make the function private. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160387245480.131299.13430357162209598411.stgit@bahia> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-11-06Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20201106' into stagingPeter Maydell1-1/+2
some s390x fixes, including a bios update # gpg: Signature made Fri 06 Nov 2020 13:08:42 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20201106: s390x: fix build for --without-default-devices target/s390x: fix execution with icount pc-bios/s390: update s390-ccw bios binaries s390-bios: Skip writing iplb location to low core for ccw ipl Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-05Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell3-1/+49
pc,pci,vhost,virtio: fixes Lots of fixes all over the place. virtio-mem and virtio-iommu patches are kind of fixes but it seems better to just make them behave sanely than try to educate users about the limitations ... Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (31 commits) contrib/vhost-user-blk: fix get_config() information leak block/export: fix vhost-user-blk get_config() information leak block/export: make vhost-user-blk config space little-endian configure: introduce --enable-vhost-user-blk-server libvhost-user: follow QEMU comment style vhost-blk: set features before setting inflight feature Revert "vhost-blk: set features before setting inflight feature" net: Add vhost-vdpa in show_netdevs() vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup vfio: Don't issue full 2^64 unmap virtio-iommu: Set supported page size mask vfio: Set IOMMU page size as per host supported page size memory: Add interface to set iommu page size mask virtio-iommu: Add notify_flag_changed() memory region callback virtio-iommu: Add replay() memory region callback virtio-iommu: Call memory notifiers in attach/detach virtio-iommu: Add memory notifiers for map/unmap virtio-iommu: Store memory region in endpoint struct virtio-iommu: Fix virtio_iommu_mr() hw/smbios: Fix leaked fd in save_opt_one() error path ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-05Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell3-0/+4
staging Doc and bug fixes # gpg: Signature made Wed 04 Nov 2020 17:01:29 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: qapi, qemu-options: make all parsing visitors parse boolean options the same qtest: escape device name in device-introspect-test ivshmem-test: do not use short-form boolean option semihosting: fix order of initialization functions fuzz: fuzz offsets within pio/mmio regions fuzz: check the MR in the DMA callback fuzz: fix writing DMA patterns tests/qtest: Fix potential NULL pointer dereference in qos_build_main_args() configure: fix gio_libs reference meson: fix warning for bad sphinx-build tests/qtest/libqos/ahci.c: Avoid NULL dereference in ahci_exec() tests/qtest/libqtest.c: Check for setsockopt() failure meson: vhost-user-gpu/virtiofsd: use absolute path meson: use b_staticpic=false for meson >=0.56.0 qtest: add a reproducer for LP#1878642 hw/isa/lpc_ich9: Ignore reserved/invalid SCI IRQ scripts/oss-fuzz: rename bin/qemu-fuzz-i386 exec: Remove dead code (CID 1432876) docs: expand sourceset documentation cutils: replace strdup with g_strdup Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-05s390x: fix build for --without-default-devicesCornelia Huck1-1/+2
s390-pci-vfio.c calls into the vfio code, so we need it to be built conditionally on vfio (which implies CONFIG_LINUX). Fixes: cd7498d07fbb ("s390x/pci: Add routine to get the vfio dma available count") Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20201103123237.718242-1-cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-11-04qapi, qemu-options: make all parsing visitors parse boolean options the samePaolo Bonzini1-0/+2
OptsVisitor, StringInputVisitor and the keyval visitor have three different ideas of how a human could write the value of a boolean option. Pay homage to the backwards-compatibility gods and make the new common helper accept all four sets (on/off, true/false, y/n and yes/no), but remove case-insensitivity. Since OptsVisitor is supposed to match qemu-options, adjust it as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201103161339.447118-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-04Merge remote-tracking branch ↵Peter Maydell4-4/+4
'remotes/philmd-gitlab/tags/mips-fixes-20201103' into staging MIPS patches queue - Removal of the 'r4k' machine (deprecated before 5.0) - Fix LGPL license text (Chetan Pant) - Support unaligned accesses on Loongson-3 (Huacai Chen) - Fix out-of-bound access in Loongson-3 embedded I/O interrupt controller (Alex Chen) CI jobs results: . https://cirrus-ci.com/build/6324890389184512 . https://gitlab.com/philmd/qemu/-/pipelines/211275262 . https://travis-ci.org/github/philmd/qemu/builds/741188958 # gpg: Signature made Tue 03 Nov 2020 17:30:30 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd-gitlab/tags/mips-fixes-20201103: target/mips: Add unaligned access support for MIPS64R6 and Loongson-3 target/mips: Fix Lesser GPL version number hw/intc/loongson: Fix incorrect 'core' calculation in liointc_read/write hw/mips/boston: Fix Lesser GPL version number hw/mips: Fix Lesser GPL version number hw/mips: Remove the 'r4k' machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-03vhost-blk: set features before setting inflight featureJin Yu1-0/+1
Virtqueue has split and packed, so before setting inflight, you need to inform the back-end virtqueue format. Signed-off-by: Jin Yu <jin.yu@intel.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20201103123617.28256-1-jin.yu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03Revert "vhost-blk: set features before setting inflight feature"Stefan Hajnoczi1-1/+0
This reverts commit adb29c027341ba095a3ef4beef6aaef86d3a520e. The commit broke -device vhost-user-blk-pci because the vhost_dev_prepare_inflight() function it introduced segfaults in vhost_dev_set_features() when attempting to access struct vhost_dev's vdev pointer before it has been assigned. To reproduce the segfault simply launch a vhost-user-blk device with the contrib vhost-user-blk device backend: $ build/contrib/vhost-user-blk/vhost-user-blk -s /tmp/vhost-user-blk.sock -r -b /var/tmp/foo.img $ build/qemu-system-x86_64 \ -device vhost-user-blk-pci,id=drv0,chardev=char1,addr=4.0 \ -object memory-backend-memfd,id=mem,size=1G,share=on \ -M memory-backend=mem,accel=kvm \ -chardev socket,id=char1,path=/tmp/vhost-user-blk.sock Segmentation fault (core dumped) Cc: Jin Yu <jin.yu@intel.com> Cc: Raphael Norwitz <raphael.norwitz@nutanix.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20201102165709.232180-1-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03hw/mips/boston: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201023122633.19466-1-chetan4windows@gmail.com> [PMD: Added hw/mips/ prefix in subject] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-11-03hw/mips: Fix Lesser GPL version numberChetan Pant3-3/+3
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com> [PMD: Split hw/ vs target/] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-11-03hw/riscv: microchip_pfsoc: Hook the I2C1 controllerBin Meng1-0/+1
The latest SD card image [1] released by Microchip ships a Linux kernel with built-in PolarFire SoC I2C driver support. The device tree file includes the description for the I2C1 node hence kernel tries to probe the I2C1 device during boot. It is enough to create an unimplemented device for I2C1 to allow the kernel to continue booting to the shell. [1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Correct DDR memory mapBin Meng1-1/+4
When system memory is larger than 1 GiB (high memory), PolarFire SoC maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is aliased to the same 1 GiB low memory with different cache attributes. At present QEMU maps the system memory contiguously from 0x8000_0000. This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is the alias to the high memory, and even physical memory is only 1 GiB, the HSS codes still tries to probe the high memory alias address. It seems there is no issue on the real hardware, so we will have to take that into the consideration in our emulation. Due to this, we we increase the default system memory size to 1537 MiB (the minimum required high memory size by HSS) so that user gets notified an error when less than 1537 MiB is specified. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Map the reserved memory at address 0Bin Meng1-0/+1
Somehow HSS needs to access address 0 [1] for the DDR calibration data which is in the chipset's reserved memory. Let's map it. [1] See the config_copy() calls in various places in ddr_setup() in the HSS source codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the SYSREG moduleBin Meng1-0/+2
Previously SYSREG was created as an unimplemented device. Now that we have a simple SYSREG module, connect it. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/misc: Add Microchip PolarFire SoC SYSREG module supportBin Meng1-0/+39
This creates a minimum model for Microchip PolarFire SoC SYSREG module. It only implements the ENVM_CR register to tell guest software that eNVM is running at the configured divider rate. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect the IOSCB moduleBin Meng1-1/+3
Previously IOSCB_CFG was created as an unimplemented device. With the new IOSCB model, its memory range is already covered by the IOSCB hence remove the previous unimplemented device creation in the SoC codes. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/misc: Add Microchip PolarFire SoC IOSCB module supportBin Meng1-0/+50
This creates a model for PolarFire SoC IOSCB [1] module. It actually contains lots of sub-modules like various PLLs to control different peripherals. Only the mininum capabilities are emulated to make the HSS DDR memory initialization codes happy. Lots of sub-modules are created as an unimplemented devices. [1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/riscv: microchip_pfsoc: Connect DDR memory controller modulesBin Meng1-0/+5
Connect DDR SGMII PHY module and CFG module to the PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/misc: Add Microchip PolarFire SoC DDR Memory Controller supportBin Meng1-0/+56
The PolarFire SoC DDR Memory Controller mainly includes 2 modules, called SGMII PHY module and the CFG module, as documented in the chipset datasheet. This creates a single file that groups these 2 modules, providing the minimum functionalities that make the HSS DDR initialization codes happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 1603863010-15807-3-git-send-email-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03target/riscv: Add sifive_plic vmstateYifei Jiang1-0/+1
Add sifive_plic vmstate for supporting sifive_plic migration. Current vmstate framework only supports one structure parameter as num field to describe variable length arrays, so introduce num_enables. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20201026115530.304-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-11-03hw/isa/lpc_ich9: Ignore reserved/invalid SCI IRQPhilippe Mathieu-Daudé1-0/+1
libFuzzer triggered the following assertion: cat << EOF | qemu-system-i386 -M pc-q35-5.0 \ -nographic -monitor none -serial none \ -qtest stdio -d guest_errors -trace pci\* outl 0xcf8 0x8400f841 outl 0xcfc 0xebed205d outl 0x5d02 0xedf82049 EOF pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d hw/pci/pci.c:268: int pci_bus_get_irq_level(PCIBus *, int): Assertion `irq_num < bus->nirq' failed. This is because ich9_lpc_sci_irq() returns -1 for reserved (illegal) values, but ich9_lpc_pmbase_sci_update() considers it valid and store it in a 8-bit unsigned type. Then the 255 value is used as GSI IRQ, resulting in a PIRQ value of 247, more than ICH9_LPC_NB_PIRQS (8). Fix by simply ignoring the invalid access (and reporting it): pci_cfg_write ICH9-LPC 31:0 @0x41 <- 0xebed205d ICH9 LPC: SCI IRQ SEL #3 is reserved pci_cfg_read mch 00:0 @0x0 -> 0x8086 pci_cfg_read mch 00:0 @0x0 -> 0x29c08086 ... Cc: qemu-stable@nongnu.org Reported-by: Alexander Bulekov <alxndr@bu.edu> Fixes: 8f242cb724 ("ich9: implement SCI_IRQ_SEL register") BugLink: https://bugs.launchpad.net/qemu/+bug/1878642 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200717151705.18611-1-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-03cutils: replace strdup with g_strdupPaolo Bonzini1-0/+1
Memory returned by get_relocated_path must be freed with free or g_free depending on the path that the function took; Coverity takes exception to this practice. The fix lets caller use g_free as is standard in QEMU. While at it, mention the requirements on the caller in the doc comment. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-03Merge remote-tracking branch ↵Peter Maydell1-0/+28
'remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag' into staging qemu-ga patch queue for soft-freeze * add guest-get-disks for w32/linux * add guest-{add,remove,get}-authorized-keys * fix API violations and schema documentation inconsistencies with recently-added guest-get-devices v3: - fix checkpatch errors regarding disallowed usages of g_assert* macros and other warnings v2: - fix BSD build error due to missing stub for guest_get_disks - fix clang build error on linux due to unused variable - disable qga-ssh-test for now due to a memory leak within GLib when G_TEST_OPTION_ISOLATE_DIRS is passed to g_test_init() since it break Gitlab CI build-oss-fuzz test - rebased and re-tested on master # gpg: Signature made Tue 03 Nov 2020 02:30:50 GMT # gpg: using RSA key CEACC9E15534EBABB82D3FA03353C9CEF108B584 # gpg: issuer "michael.roth@amd.com" # gpg: Good signature from "Michael Roth <flukshun@gmail.com>" [full] # gpg: aka "Michael Roth <mdroth@utexas.edu>" [full] # gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>" [full] # Primary key fingerprint: CEAC C9E1 5534 EBAB B82D 3FA0 3353 C9CE F108 B584 * remotes/mdroth/tags/qga-pull-2020-10-27-v3-tag: qga: add ssh-get-authorized-keys meson: minor simplification qga: add *reset argument to ssh-add-authorized-keys qga: add ssh-{add,remove}-authorized-keys glib-compat: add g_unix_get_passwd_entry_qemu() qga: add implementation of guest-get-disks for Windows qga: add implementation of guest-get-disks for Linux qga: add command guest-get-disks qga: Flatten simple union GuestDeviceId qga-win: Fix guest-get-devices error API violations qga: Use common time encoding for guest-get-devices 'driver-date' qga: Rename guest-get-devices return member 'address' to 'id' Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-03memory: Add interface to set iommu page size maskBharat Bhushan1-0/+38
Allow to set the page size mask supported by an iommu memory region. This enables a vIOMMU to communicate the page size granule supported by an assigned device, on hosts that use page sizes greater than 4kB. Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-Id: <20201030180510.747225-8-jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03memory-device: Add get_min_alignment() callbackDavid Hildenbrand1-0/+10
Add a callback that can be used to express additional alignment requirements (exceeding the ones from the memory region). Will be used by virtio-mem to express special alignment requirements due to manually configured, big block sizes (e.g., 1GB with an ordinary memory-backend-ram). This avoids failing later when realizing, because auto-detection wasn't able to assign a properly aligned address. Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-6-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03Merge remote-tracking branch ↵Peter Maydell1-1/+0
'remotes/pmaydell/tags/pull-target-arm-20201102' into staging target-arm queue: * target/arm: Fix Neon emulation bugs on big-endian hosts * target/arm: fix handling of HCR.FB * target/arm: fix LORID_EL1 access check * disas/capstone: Fix monitor disassembly of >32 bytes * hw/arm/smmuv3: Fix potential integer overflow (CID 1432363) * hw/arm/boot: fix SVE for EL3 direct kernel boot * hw/display/omap_lcdc: Fix potential NULL pointer dereference * hw/display/exynos4210_fimd: Fix potential NULL pointer dereference * target/arm: Get correct MMU index for other-security-state * configure: Test that gio libs from pkg-config work * hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work * docs: Fix building with Sphinx 3 * tests/qtest/npcm7xx_rng-test: Disable randomness tests # gpg: Signature made Mon 02 Nov 2020 17:09:00 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201102: (26 commits) tests/qtest/npcm7xx_rng-test: Disable randomness tests qemu-option-trace.rst.inc: Don't use option:: markup scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work configure: Test that gio libs from pkg-config work target/arm: Get correct MMU index for other-security-state hw/display/exynos4210_fimd: Fix potential NULL pointer dereference hw/display/omap_lcdc: Fix potential NULL pointer dereference hw/arm/boot: fix SVE for EL3 direct kernel boot hw/arm/smmuv3: Fix potential integer overflow (CID 1432363) disas/capstone: Fix monitor disassembly of >32 bytes target/arm: fix LORID_EL1 access check target/arm: fix handling of HCR.FB target/arm: Fix VUDOT/VSDOT (scalar) on big-endian hosts target/arm: Fix float16 pairwise Neon ops on big-endian hosts target/arm: Improve do_prewiden_3d target/arm: Simplify do_long_3d and do_2scalar_long target/arm: Rename neon_load_reg64 to vfp_load_reg64 target/arm: Add read/write_neon_element64 target/arm: Rename neon_load_reg32 to vfp_load_reg32 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02glib-compat: add g_unix_get_passwd_entry_qemu()Marc-André Lureau1-0/+28
The glib function was introduced in 2.64. It's a safer version of getpwnam, and also simpler to use than getpwnam_r. Currently, it's only use by the next patch in qemu-ga, which doesn't (well well...) need the thread safety guarantees. Since the fallback version is still unsafe, I would rather keep the _qemu postfix, to make sure it's not being misused by mistake. When/if necessary, we can implement a safer fallback and drop the _qemu suffix. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> *fix checkpatch warnings about newlines before/after block comments Signed-off-by: Michael Roth <michael.roth@amd.com>
2020-11-02Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20201102' into stagingPeter Maydell2-5/+17
nvme pull 2 Nov 2020 # gpg: Signature made Mon 02 Nov 2020 15:20:30 GMT # gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0 # gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown] # gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown] # gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0 * remotes/nvme/tags/pull-nvme-20201102: (30 commits) hw/block/nvme: fix queue identifer validation hw/block/nvme: fix create IO SQ/CQ status codes hw/block/nvme: fix prp mapping status codes hw/block/nvme: report actual LBA data shift in LBAF hw/block/nvme: add trace event for requests with non-zero status code hw/block/nvme: add nsid to get/setfeat trace events hw/block/nvme: reject io commands if only admin command set selected hw/block/nvme: support for admin-only command set hw/block/nvme: validate command set selected hw/block/nvme: support per-namespace smart log hw/block/nvme: fix log page offset check hw/block/nvme: remove pointless rw indirection hw/block/nvme: update nsid when registered hw/block/nvme: change controller pci id pci: allocate pci id for nvme hw/block/nvme: support multiple namespaces hw/block/nvme: refactor identify active namespace id list hw/block/nvme: add support for sgl bit bucket descriptor hw/block/nvme: add support for scatter gather lists hw/block/nvme: harden cmb access ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts workPeter Maydell1-1/+0
In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt into the GICv3CPUState struct's maintenance_irq field. This will only work if the board happens to have already wired up the CPU maintenance IRQ before the GIC was realized. Unfortunately this is not the case for the 'virt' board, and so the value that gets copied is NULL (since a qemu_irq is really a pointer to an IRQState struct under the hood). The effect is that the CPU interface code never actually raises the maintenance interrupt line. Instead, since the GICv3CPUState has a pointer to the CPUState, make the dereference at the point where we want to raise the interrupt, to avoid an implicit requirement on board code to wire things up in a particular order. Reported-by: Jose Martins <josemartins90@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20201009153904.28529-1-peter.maydell@linaro.org Reviewed-by: Luc Michel <luc@lmichel.fr>
2020-11-02Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20201101.0' ↵Peter Maydell14-6/+898
into staging VFIO update 2020-11-01 * Migration support (Kirti Wankhede) * s390 DMA limiting (Matthew Rosato) * zPCI hardware info (Matthew Rosato) * Lock guard (Amey Narkhede) * Print fixes (Zhengui li) * Warning/build fixes # gpg: Signature made Sun 01 Nov 2020 20:38:10 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20201101.0: (32 commits) vfio: fix incorrect print type hw/vfio: Use lock guard macros s390x/pci: get zPCI function info from host vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilities s390x/pci: use a PCI Function structure s390x/pci: clean up s390 PCI groups s390x/pci: use a PCI Group structure s390x/pci: create a header dedicated to PCI CLP s390x/pci: Honor DMA limits set by vfio s390x/pci: Add routine to get the vfio dma available count vfio: Find DMA available capability vfio: Create shared routine for scanning info capabilities s390x/pci: Move header files to include/hw/s390x linux-headers: update against 5.10-rc1 update-linux-headers: Add vfio_zdev.h qapi: Add VFIO devices migration stats in Migration stats vfio: Make vfio-pci device migration capable vfio: Add ioctl to get dirty pages bitmap during dma unmap vfio: Dirty page tracking when vIOMMU is enabled vfio: Add vfio_listener_log_sync to mark dirty pages ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-01s390x/pci: get zPCI function info from hostMatthew Rosato3-4/+11
We use the capability chains of the VFIO_DEVICE_GET_INFO ioctl to retrieve the CLP information that the kernel exports. To be compatible with previous kernel versions we fall back on previous predefined values, same as the emulation values, when the ioctl is found to not support capability chains. If individual CLP capabilities are not found, we fall back on default values for only those capabilities missing from the chain. This patch is based on work previously done by Pierre Morel. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilitiesMatthew Rosato1-0/+2
Now that VFIO_DEVICE_GET_INFO supports capability chains, add a helper function to find specific capabilities in the chain. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Function structurePierre Morel1-0/+1
We use a ClpRspQueryPci structure to hold the information related to a zPCI Function. This allows us to be ready to support different zPCI functions and to retrieve the zPCI function information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Group structurePierre Morel1-0/+10
We use a S390PCIGroup structure to hold the information related to a zPCI Function group. This allows us to be ready to support multiple groups and to retrieve the group information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: create a header dedicated to PCI CLPPierre Morel3-196/+212
To have a clean separation between s390-pci-bus.h and s390-pci-inst.h headers we export the PCI CLP instructions in a dedicated header. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Honor DMA limits set by vfioMatthew Rosato3-0/+24
When an s390 guest is using lazy unmapping, it can result in a very large number of oustanding DMA requests, far beyond the default limit configured for vfio. Let's track DMA usage similar to vfio in the host, and trigger the guest to flush their DMA mappings before vfio runs out. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Add routine to get the vfio dma available countMatthew Rosato1-0/+24
Create new files for separating out vfio-specific work for s390 pci. Add the first such routine, which issues VFIO_IOMMU_GET_INFO ioctl to collect the current dma available count. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: Fix non-Linux build with CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Find DMA available capabilityMatthew Rosato1-0/+2
The underlying host may be limiting the number of outstanding DMA requests for type 1 IOMMU. Add helper functions to check for the DMA available capability and retrieve the current number of DMA mappings allowed. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: vfio_get_info_dma_avail moved inside CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Move header files to include/hw/s390xMatthew Rosato2-0/+684
Seems a more appropriate location for them. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01linux-headers: update against 5.10-rc1Matthew Rosato9-6/+102
commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> [aw: drop pvrdma_ring.h changes to avoid revert of d73415a31547 ("qemu/atomic.h: rename atomic_ to qatomic_")] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01qapi: Add VFIO devices migration stats in Migration statsKirti Wankhede1-0/+3
Added amount of bytes transferred to the VM at destination by all VFIO devices Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Get migration capability flags for containerKirti Wankhede1-0/+3
Added helper functions to get IOMMU info capability chain. Added function to get migration capability information from that capability chain for IOMMU container. Similar change was proposed earlier: https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg03759.html Disable migration for devices if IOMMU module doesn't support migration capability. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add save state functions to SaveVMHandlersKirti Wankhede1-0/+1
Added .save_live_pending, .save_live_iterate and .save_live_complete_precopy functions. These functions handles pre-copy and stop-and-copy phase. In _SAVING|_RUNNING device state or pre-copy phase: - read pending_bytes. If pending_bytes > 0, go through below steps. - read data_offset - indicates kernel driver to write data to staging buffer. - read data_size - amount of data in bytes written by vendor driver in migration region. - read data_size bytes of data from data_offset in the migration region. - Write data packet to file stream as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data, VFIO_MIG_FLAG_END_OF_STATE } In _SAVING device state or stop-and-copy phase a. read config space of device and save to migration file stream. This doesn't need to be from vendor driver. Any other special config state from driver can be saved as data in following iteration. b. read pending_bytes. If pending_bytes > 0, go through below steps. c. read data_offset - indicates kernel driver to write data to staging buffer. d. read data_size - amount of data in bytes written by vendor driver in migration region. e. read data_size bytes of data from data_offset in the migration region. f. Write data packet as below: {VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data} g. iterate through steps b to f while (pending_bytes > 0) h. Write {VFIO_MIG_FLAG_END_OF_STATE} When data region is mapped, its user's responsibility to read data from data_offset of data_size before moving to next steps. Added fix suggested by Artem Polyakov to reset pending_bytes in vfio_save_iterate(). Added fix suggested by Zhi Wang to add 0 as data size in migration stream and add END_OF_STATE delimiter to indicate phase complete. Suggested-by: Artem Polyakov <artemp@nvidia.com> Suggested-by: Zhi Wang <zhi.wang.linux@gmail.com> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Yan Zhao <yan.y.zhao@intel.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add migration state change notifierKirti Wankhede1-0/+2
Added migration state change notifier to get notification on migration state change. These states are translated to VFIO device state and conveyed to vendor driver. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add VM state change handler to know state of VMKirti Wankhede1-0/+4
VM state change handler is called on change in VM's state. Based on VM state, VFIO device state should be changed. Added read/write helper functions for migration region. Added function to set device_state. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: lx -> HWADDR_PRIx, remove redundant parens] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add migration region initialization and finalize functionKirti Wankhede1-0/+9
Whether the VFIO device supports migration or not is decided based of migration region query. If migration region query is successful and migration region initialization is successful then migration is supported else migration is blocked. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add save and load functions for VFIO PCI devicesKirti Wankhede1-0/+2
Added functions to save and restore PCI device specific data, specifically config space of PCI device. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add vfio_get_object callback to VFIODeviceOpsKirti Wankhede1-0/+1
Hook vfio_get_object callback for PCI devices. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01vfio: Add function to unmap VFIO regionKirti Wankhede1-0/+1
This function will be used for migration region. Migration region is mmaped when migration starts and will be unmapped when migration is complete. Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Neo Jia <cjia@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit v1.1 at 2024-11-02 21:35:22 +0000