aboutsummaryrefslogtreecommitdiff
path: root/include/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2024-07-18hw/arm/smmu: Support nesting in the rest of commandsMostafa Saleh1-0/+1
Some commands need rework for nesting, as they used to assume S1 and S2 are mutually exclusive: - CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported - CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise invalidate everything, this required a new vmid invalidation function for stage-1 only (ASID >= 0) Also, rework trace events to reflect the new implementation. Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-15-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Introduce smmu_iotlb_inv_asid_vmidMostafa Saleh1-1/+1
Soon, Instead of doing TLB invalidation by ASID only, VMID will be also required. Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID. However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID which is a stage-1 command, so passing VMID = -1 keeps the original behaviour. Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-14-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Support nesting in smmuv3_range_inval()Mostafa Saleh1-1/+2
With nesting, we would need to invalidate IPAs without over-invalidating stage-1 IOVAs. This can be done by distinguishing IPAs in the TLBs by having ASID=-1. To achieve that, rework the invalidation for IPAs to have a separate function, while for IOVA invalidation ASID=-1 means invalidate for all ASIDs. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-13-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu-common: Support nested translationMostafa Saleh1-3/+4
When nested translation is requested, do the following: - Translate stage-1 table address IPA into PA through stage-2. - Translate stage-1 table walk output (IPA) through stage-2. - Create a single TLB entry from stage-1 and stage-2 translations using logic introduced before. smmu_ptw() has a new argument SMMUState which include the TLB as stage-1 table address can be cached in there. Also in smmu_ptw(), a separate path used for nesting to simplify the code, although some logic can be combined. With nested translation class of translation fault can be different, from the class of the translation, as faults from translating stage-1 tables are considered as CLASS_TT and not CLASS_IN, a new member "is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults from walking stage 1 translation table and faults from translating an IPA for a transaction. Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-12-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu-common: Add support for nested TLBMostafa Saleh1-0/+1
This patch adds support for nested (combined) TLB entries. The main function combine_tlb() is not used here but in the next patches, but to simplify the patches it is introduced first. Main changes: 1) New field added in the SMMUTLBEntry struct: parent_perm, for nested TLB, holds the stage-2 permission, this can be used to know the origin of a permission fault from a cached entry as caching the “and” of the permissions loses this information. SMMUPTWEventInfo is used to hold information about PTW faults so the event can be populated, the value of stage used to be set based on the current stage for TLB permission faults, however with the parent_perm, it is now set based on which perm has the missing permission When nesting is not enabled it has the same value as perm which doesn't change the logic. 2) As combined TLB implementation is used, the combination logic chooses: - tg and level from the entry which has the smallest addr_mask. - Based on that the iova that would be cached is recalculated. - Translated_addr is chosen from stage-2. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-11-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Introduce CACHED_ENTRY_TO_ADDRMostafa Saleh1-0/+3
Soon, smmuv3_do_translate() will be used to translate the CD and the TTBx, instead of re-writting the same logic to convert the returned cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-8-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Consolidate ASID and VMID typesMostafa Saleh1-7/+7
ASID and VMID used to be uint16_t in the translation config, however, in other contexts they can be int as -1 in case of TLB invalidation, to represent all (don’t care). When stage-2 was added asid was set to -1 in stage-2 and vmid to -1 in stage-1 configs. However, that meant they were set as (65536), this was not an issue as nesting was not supported and no commands/lookup uses both. With nesting, it’s critical to get this right as translation must be tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2. Represent ASID/VMID everywhere as int. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-7-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Split smmuv3_translate()Mostafa Saleh1-0/+8
smmuv3_translate() does everything from STE/CD parsing to TLB lookup and PTW. Soon, when nesting is supported, stage-1 data (tt, CD) needs to be translated using stage-2. Split smmuv3_translate() to 3 functions: - smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW, TLB insertion, all the functions are already there, this just puts them together. This also simplifies the code as it consolidates event generation in case of TLB lookup permission failure or in TT selection. - smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does the event population in case of errors. - smmuv3_translate(), now calls smmuv3_do_translate() for translation while the rest is the same. Also, add stage in trace_smmuv3_translate_success() Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-6-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Use enum for SMMU stageMostafa Saleh1-2/+9
Currently, translation stage is represented as an int, where 1 is stage-1 and 2 is stage-2, when nested is added, 3 would be confusing to represent nesting, so we use an enum instead. While keeping the same values, this is useful for: - Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is stage-2 and both is nested. - Tracing, as stage is printed as int. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20240715084519.1189624-5-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/arm/smmu-common: Replace smmu_iommu_mr with smmu_find_sdevNicolin Chen1-2/+2
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config(). Do it directly instead of bridging with an iommu mr pointer. Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Message-id: 20240619002218.926674-1-nicolinc@nvidia.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/misc: Implement mailbox properties for customer OTP and device specific ↵Rayhan Faizel1-0/+2
private keys Four mailbox properties are implemented as follows: 1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP 2. Device-specific private key: GET_PRIVATE_KEY and SET_PRIVATE_KEY. The customer OTP is located in the rows 36-43. The device-specific private key is located in the rows 56-63. The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000 when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates this lock, which is undocumented. The lock also applies to the device-specific private key. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-01hw/arm: Connect OTP device to BCM2835Rayhan Faizel1-1/+2
Replace stubbed OTP memory region with the new OTP device. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-06-21hw/arm/virt: allow creation of a second NonSecure UARTPeter Maydell1-0/+1
For some use-cases, it is helpful to have more than one UART available to the guest. If the second UART slot is not already used for a TrustZone Secure-World-only UART, create it as a NonSecure UART only when the user provides a serial backend (e.g. via a second -serial command line option). This avoids problems where existing guest software only expects a single UART, and gets confused by the second UART in the DTB. The major example of this is older EDK2 firmware, which will send the GRUB bootloader output to UART1 and the guest serial output to UART0. Users who want to use both UARTs with a guest setup including EDK2 are advised to update to EDK2 release edk2-stable202311 or newer. (The prebuilt EDK2 blobs QEMU upstream provides are new enough.) The relevant EDK2 changes are the ones described here: https://bugzilla.tianocore.org/show_bug.cgi?id=4577 Inspired-by: Axel Heider <axel.heider@hensoldt.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240610162343.2131524-4-peter.maydell@linaro.org
2024-06-21hw/arm/virt: Rename VIRT_UART and VIRT_SECURE_UART to VIRT_UART[01]Peter Maydell1-2/+2
We're going to make the second UART not always a secure-only device. Rename the constants VIRT_UART and VIRT_SECURE_UART to VIRT_UART0 and VIRT_UART1 accordingly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240610162343.2131524-3-peter.maydell@linaro.org
2024-06-16aspeed/soc: fix incorrect dram size for AST2700Jamin Lin1-0/+2
AST2700 dram size calculation is not back compatible AST2600. According to the DDR capacity hardware behavior, if users write the data to the address which is beyond the ram size, it would write the data to the "address % ram_size". For example: a. sdram base address "0x4 00000000" b. sdram size 1 GiB The available address range is from "0x4 00000000" to "0x4 3FFFFFFF". If users write 0x12345678 to address "0x5 00000000", the value of DRAM address 0 (base address 0x4 00000000) will be 0x12345678. Add aspeed_soc_ast2700_dram_init to calculate the dram size and add memory I/O whose address range is from "max_ram_size - ram_size" to max_ram_size and its read/write handler to emulate DDR capacity hardware behavior. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-06-16aspeed/soc: Add AST2700 supportJamin Lin1-2/+26
Initial definitions for a simple machine using an AST2700 SOC (Cortex-a35 CPU). AST2700 SOC and its interrupt controller are too complex to handle in the common Aspeed SoC framework. We introduce a new ast2700 class with instance_init and realize handlers. AST2700 is a 64 bits quad core cpus and support 8 watchdog. Update maximum ASPEED_CPUS_NUM to 4 and ASPEED_WDTS_NUM to 8. In addition, update AspeedSocState to support scuio, sli, sliio and intc. Add TYPE_ASPEED27X0_SOC machine type. The SDMC controller is unlocked at SPL stage. At present, only supports to emulate booting start from u-boot stage. Set SDMC controller unlocked by default. In INTC, each interrupt of INT 128 to INT 136 combines 32 interrupts. It connect GICINT IRQ GPIO-OUTPUT pins to GIC device with irq 128 to 136. And, if a device irq is 128 to 136, its irq GPIO-OUTPUT pin is connected to GICINT or-gates instead of GIC device. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-04-25hw/arm: Add the USART to the stm32l4x5 SoCArnaud Minier1-0/+7
Add the USART to the SoC and connect it to the other implemented devices. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-07hw/arm: Connect STM32L4x5 GPIO to STM32L4x5 SoCInès Varhol1-0/+2
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240305210444.310665-3-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm/stm32l4x5_soc.c: Use the RCC SysclkArnaud Minier1-3/+0
Now that we can generate reliable clock frequencies from the RCC, remove the hacky definition of the sysclk in the b_l475e_iot01a initialisation code and use the correct RCC clock. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeletonArnaud Minier1-0/+2
Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2Rayhan Faizel1-1/+3
BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27Merge tag 'pull-target-arm-20240227-1' of ↵Peter Maydell7-7/+217
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Handle atomic updates of page tables entries in MMIO during PTW * Advertise Cortex-A53 erratum #843419 fix via REVIDR * MAINTAINERS: Cover hw/ide/ahci-allwinner.c with AllWinner A10 machine * misc: m48t59: replace qemu_system_reset_request() call with watchdog_perform_action() * misc: pxa2xx_timer: replace qemu_system_reset_request() call with watchdog_perform_action() * xlnx-versal-ospi: disable reentrancy detection for iomem_dac * sbsa-ref: Simplify init since PCIe is always enabled * stm32l4x5: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQs * pl031: Update last RTCLR value on write in case it's read back * block: m25p80: Add support of mt35xu02gbba * xlnx-versal-virt: Add machine property ospi-flash * reset: refactor system reset to be three-phase aware * new board model raspi4b # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXeAMEZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3syyD/4lJzzstbDIAsu94Z4Hi0So # CFLAMJFsPy3fMsU2IqVP+TDTyhUeMPebwfj7sQHUtQcXVh5i1/HlYgdUgXsnjGWQ # pc6BxycpW6uJWYb7Ma3CdSGS+hxEpQ+U8Qeijwqg0kAqhjNtrSIkTRQ4u8p8T+kN # dWtQzp7D15BpEVhWl/2dLWWJwV3H6TThmr1FbK5wl/c7hJzy2uaXqmmCvercU0Zo # 6ab3SnGyhaujdd/FsDvhnVEYqcmcO2p9UtSnGAbdfw0zsf4p8cS2Q6M9q4DHBFYn # 6Bt51DFP5D+114VpqRSXF2Lv9K8swjTgqhDld9vCoios6pS3LMwcTAcONUxE8JU+ # uD7kXTN/lv3atNEy4MTFkTeNtKgbYJJuPwWrDRNdbVXPwrEHGWN3+ZYISmuYb+p+ # XL2/7HeP7/qEVMW2d18+7OCriZwKiBRZRKUrtG7mQSBZEMetbhpA+mLcxAZT0FAl # 18O/mcvEJrrE7x6Bqyv96b8PE0/er5cVg/b/wrkKS8DL4NWU9bJSjJNRrvt9bvvl # jSzPGo4ngHlfO0OpurLoFOZCVxKWVXgaKkQ3pOz301nsDyhEndNLeCxrITac8G2Q # C/WQuMaeOoV1x7N2MzaCQmyRzy8yGkG9av0aI/8feobfV/Yg4wPsfhcEn/XQWXKv # NUJ4/z78FbJlI2JeDP2QSA== # =xaMv # -----END PGP SIGNATURE----- # gpg: Signature made Tue 27 Feb 2024 15:33:21 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240227-1' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) docs/system/arm: Add RPi4B to raspi.rst hw/misc/bcm2835_property: Add missed BCM2835 properties tests/avocado/boot_linux_console.py: Add Rpi4b boot tests hw/arm/bcm2838_peripherals: Add clock_isp stub hw/arm: Add memory region for BCM2837 RPiVid ASB hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devices hw/arm: Introduce Raspberry PI 4 machine hw/arm: Add GPIO and SD to BCM2838 periph hw/gpio: Connect SD controller to BCM2838 GPIO hw/gpio: Implement BCM2838 GPIO functionality hw/gpio: Add BCM2838 GPIO stub hw/arm/bcm2838: Add GIC-400 to BCM2838 SoC hw/arm: Introduce BCM2838 SoC hw/arm/raspi: Split out raspi machine common part hw/arm/bcm2853_peripherals: Split out common part of peripherals hw/arm/bcm2836: Split out common part of BCM283X classes docs/devel/reset: Update to discuss system reset hw/core/machine: Use qemu_register_resettable for sysbus reset hw/core/reset: Implement qemu_register_reset via qemu_register_resettable hw/core/reset: Add qemu_{register, unregister}_resettable() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/misc/bcm2835_property: Add missed BCM2835 propertiesSergey Kambalin1-0/+11
Our model of the bcm2835 mailbox is missing a few properties that we need for the raspi4 kernel: * RPI_FWREQ_GET_CLOCKS * RPI_FWREQ_GET_THROTTLED * RPI_FWREQ_VCHIQ_INIT Add minimal implementations of them. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Message-id: 20240226000259.2752893-40-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [PMM: improved commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838_peripherals: Add clock_isp stubSergey Kambalin1-0/+1
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add memory region for BCM2837 RPiVid ASBSergey Kambalin2-1/+3
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-13-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/raspi4b: Temporarily disable unimplemented rpi4b devicesSergey Kambalin1-0/+4
This commit adds RPi4B device tree modifications: - disable pcie, rng200, thermal sensor and genet devices (they're going to be re-enabled in the following commits) - create additional memory region in device tree if RAM amount exceeds VC base address. Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-12-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Introduce Raspberry PI 4 machineSergey Kambalin1-0/+11
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-11-sergey.kambalin@auriga.com [PMM: Change name to 'raspi4b', not 'raspi4b-2g'] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Add GPIO and SD to BCM2838 periphSergey Kambalin1-0/+8
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-10-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2838: Add GIC-400 to BCM2838 SoCSergey Kambalin2-0/+39
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-6-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Introduce BCM2838 SoCSergey Kambalin2-0/+65
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-5-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/raspi: Split out raspi machine common partSergey Kambalin1-0/+21
Pre-setup for raspberry pi 4 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-4-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2853_peripherals: Split out common part of peripheralsSergey Kambalin2-5/+27
Pre-setup for BCM2838 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-3-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm/bcm2836: Split out common part of BCM283X classesSergey Kambalin1-2/+24
Pre setup for BCM2838 introduction Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240226000259.2752893-2-sergey.kambalin@auriga.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27hw/arm: Use TYPE_OR_IRQ when connecting STM32L4x5 EXTI fan-in IRQsInès Varhol1-0/+4
Fixes: 52671f69f7a4 ("[PATCH v8 0/3] Add device STM32L4x5 EXTI") Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240220184145.106107-2-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-27aspeed: fix hardcode boot address 0Jamin Lin1-2/+0
In the previous design of ASPEED SOCs QEMU model, it set the boot address at "0" which was the hardcode setting for ast10x0, ast2600, ast2500 and ast2400. According to the design of ast2700, it has a bootmcu(riscv-32) which is used for executing SPL and initialize DRAM and copy u-boot image from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage. Then, CPUs(cortex-a35) execute u-boot, kernel and rofs. Currently, qemu not support emulate two CPU architectures at the same machine. Therefore, qemu will only support to emulate CPU(cortex-a35) side for ast2700 and the boot address is "0x4 00000000". Fixed hardcode boot address "0" for future models using a different mapping address. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27aspeed: introduce a new UART0 device nameJamin Lin1-0/+17
The Aspeed datasheet refers to the UART controllers as UART1 - UART13 for the ast10x0, ast2600, ast2500 and ast2400 SoCs and the Aspeed ast2700 introduces an UART0 and the UART controllers as UART0 - UART12. To keep the naming in the QEMU models in sync with the datasheet, let's introduce a new UART0 device name and do the required adjustements. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - Kept original assert() in aspeed_soc_uart_set_chr() - Fixed 'i' range in connect_serial_hds_to_uarts() loop ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-21hw/arm/omap.h: correct typosManos Pitsidianakis1-1/+2
Correct typos automatically found with the `typos` tool <https://crates.io/crates/typos> Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> (mjt: fix comment style as suggested by Philippe) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-16Merge tag 'hw-misc-20240215' of https://github.com/philmd/qemu into stagingPeter Maydell3-3/+3
Misc HW patch queue - Remove unused MIPS SAAR* registers (Phil) - Remove warning when testing the TC58128 NAND EEPROM (Peter) - KConfig cleanups around ISA SuperI/O and MIPS (Paolo) - QDev API uses sanitization (Philippe) - Split AHCI model as PCI / SysBus (Philippe) - Add SMP support to SPARC Leon3 board (Clément) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXOUD4ACgkQ4+MsLN6t # wN6gWRAAjf+6Z9VUvvHqZoaSJW49k+GRUelTI2tyN+eGfetAx9dk8aIbpbV1X12d # pc56jsSi6ICT7baCegtxHszhYJr2e9A2QLCAOJt+Oz87kEGes3ONVVKAk7pwjKxt # m8pmU3uXWgFvU6PoFBhGBa6LiZBulgLNXBUwzmEhc9PpPkR49ULdDp/qxtWvxOV5 # xYBktFlkiT+AvHq3QWCnDIaw+pH5ghEq9BI4xFOvvvqSqdHEqsGAaiKPa9Po0Gfz # Ap9qsm4FxKxhGoeQWtAIP8TvN3pFFSXMysziP6Xt1rffKsvF9ioghGKRM6BgQfqD # ZetjcFbcf7dQu3zZVy8ljYcymMxfZcWWVVq4CMC68lPQE97hz1CT3PJjgd77dKfi # z60uRkOGaiPW5iIGT9+vdQxZ5K3HivKyjuHOdV8V4HnWO3oqgfDtNHn5RKed0qUg # g1FoWriJGsDixdx1vd0EoH2/oTxy4HIsFv7a1OjiZyBLjO+EeEZ3+H9pqUHqBxva # +Dv70z9F1sv5dzcUXH+oCgTbnKlJ90Q+e3vj0wGdlBncVsgIwbtgqYelhUEl+xJX # Mu6KNUo5ANVP38ZKG0GSMCZHfcUjc5s+5rG55NbTN0HiF56a6D2KlQAuXdUsGE1J # 7i4cwipJmfxzbdPDlSb3kBxm5pFexEk6nROF9kTHQj3ZBMMvIls= # =nOX+ # -----END PGP SIGNATURE----- # gpg: Signature made Thu 15 Feb 2024 17:56:14 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'hw-misc-20240215' of https://github.com/philmd/qemu: (56 commits) hw/ide/ich9: Use AHCIPCIState typedef hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h' hw/ide/ahci: Remove SysbusAHCIState::num_ports field hw/ide/ahci: Do not pass 'ports' argument to ahci_realize() hw/ide/ahci: Convert AHCIState::ports to unsigned hw/ide/ahci: Pass AHCI context to ahci_ide_create_devs() hw/ide/ahci: Inline ahci_get_num_ports() hw/ide/ahci: Rename AHCI PCI function as 'pdev' hw/ide/ahci: Expose AHCIPCIState structure hw/i386/q35: Use DEVICE() cast macro with PCIDevice object hw/i386/q35: Simplify pc_q35_init() since PCI is always enabled MAINTAINERS: Add myself as reviewer for TCG Plugins MAINTAINERS: replace Fabien by myself as Leon3 maintainer hw/sparc/leon3: Initialize GPIO before realizing CPU devices hw/sparc/leon3: Pass DeviceState opaque argument to leon3_start_cpu() hw/sparc/leon3: Pass DeviceState opaque argument to leon3_set_pil_in() hw/sparc/leon3: check cpu_id in the tiny bootloader hw/sparc/leon3: implement multiprocessor hw/sparc/leon3: remove SP initialization target/sparc: implement asr17 feature for smp ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h'Philippe Mathieu-Daudé3-3/+3
Keep "hw/ide/ahci.h" AHCI-generic. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240213081201.78951-10-philmd@linaro.org>
2024-02-15hw/arm/smmuv3: add support for stage 1 access faultLuc Michel1-0/+1
An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/virt: Wire up non-secure EL2 virtual timer IRQPeter Maydell1-0/+2
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
2024-02-02hw/arm: Connect SPI Controller to BCM2835Rayhan Faizel1-1/+2
This patch will allow the SPI controller to be accessible from BCM2835 based boards as SPI0. SPI driver is usually disabled by default and config.txt does not work. Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com [PMM: indent tweak] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm: Add GMAC devices to NPCM7XX SoCHao Wu1-0/+2
Change-Id: Id8a3461fb5042adc4c3fd6f4fbd1ca0d33e22565 Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240131002800.989285-3-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[]Philippe Mathieu-Daudé1-3/+0
The M2Sxxx SoC family can only be used with Cortex-M3. Propagating the CPU type from the board level is pointless. Hard-code the CPU type at the SoC level. Remove the now ignored MachineClass::default_cpu_type field. Use the common code introduced in commit c9cf636d48 ("machine: Add a valid_cpu_types property") to check for valid CPU type at the board level. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240129151828.59544-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-01Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into ↵Peter Maydell1-1/+7
staging aspeed queue: * Update of buildroot images to 2023.11 (6.6.3 kernel) * Check of the valid CPU type supported by aspeed machines * Simplified models for the IBM's FSI bus and the Aspeed controller bridge # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7 # 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD # lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q # 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb # 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj # wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI # yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo # ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH # 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ # 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/ # 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb # D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo= # =0C5S # -----END PGP SIGNATURE----- # gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu: hw/fsi: Update MAINTAINER list hw/fsi: Added FSI documentation hw/fsi: Added qtest hw/arm: Hook up FSI module in AST2600 hw/fsi: Aspeed APB2OPB & On-chip peripheral bus hw/fsi: Introduce IBM's FSI master hw/fsi: Introduce IBM's cfam hw/fsi: Introduce IBM's fsi-slave model hw/fsi: Introduce IBM's FSI Bus hw/fsi: Introduce IBM's scratchpad device hw/fsi: Introduce IBM's Local bus hw/arm/aspeed: Check for CPU types in machine_run_board_init() hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper hw/arm/aspeed: Init CPU defaults in a common helper hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus() hw/arm/aspeed: Remove dead code tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-01hw/arm: Hook up FSI module in AST2600Ninad Palsule1-0/+4
This patchset introduces IBM's Flexible Service Interface(FSI). Time for some fun with inter-processor buses. FSI allows a service processor access to the internal buses of a host POWER processor to perform configuration or debugging. FSI has long existed in POWER processes and so comes with some baggage, including how it has been integrated into the ASPEED SoC. Working backwards from the POWER processor, the fundamental pieces of interest for the implementation are: 1. The Common FRU Access Macro (CFAM), an address space containing various "engines" that drive accesses on buses internal and external to the POWER chip. Examples include the SBEFIFO and I2C masters. The engines hang off of an internal Local Bus (LBUS) which is described by the CFAM configuration block. 2. The FSI slave: The slave is the terminal point of the FSI bus for FSI symbols addressed to it. Slaves can be cascaded off of one another. The slave's configuration registers appear in address space of the CFAM to which it is attached. 3. The FSI master: A controller in the platform service processor (e.g. BMC) driving CFAM engine accesses into the POWER chip. At the hardware level FSI is a bit-based protocol supporting synchronous and DMA-driven accesses of engines in a CFAM. 4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in POWER processors. This now makes an appearance in the ASPEED SoC due to tight integration of the FSI master IP with the OPB, mainly the existence of an MMIO-mapping of the CFAM address straight onto a sub-region of the OPB address space. 5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in the AST2600. Hardware limitations prevent the OPB from being directly mapped into APB, so all accesses are indirect through the bridge. The implementation appears as following in the qemu device tree: (qemu) info qtree bus: main-system-bus type System ... dev: aspeed.apb2opb, id "" gpio-out "sysbus-irq" 1 mmio 000000001e79b000/0000000000001000 bus: opb.1 type opb dev: fsi.master, id "" bus: fsi.bus.1 type fsi.bus dev: cfam.config, id "" dev: cfam, id "" bus: fsi.lbus.1 type lbus dev: scratchpad, id "" address = 0 (0x0) bus: opb.0 type opb dev: fsi.master, id "" bus: fsi.bus.0 type fsi.bus dev: cfam.config, id "" dev: cfam, id "" bus: fsi.lbus.0 type lbus dev: scratchpad, id "" address = 0 (0x0) The LBUS is modelled to maintain the qdev bus hierarchy and to take advantage of the object model to automatically generate the CFAM configuration block. The configuration block presents engines in the order they are attached to the CFAM's LBUS. Engine implementations should subclass the LBusDevice and set the 'config' member of LBusDeviceClass to match the engine's type. CFAM designs offer a lot of flexibility, for instance it is possible for a CFAM to be simultaneously driven from multiple FSI links. The modeling is not so complete; it's assumed that each CFAM is attached to a single FSI slave (as a consequence the CFAM subclasses the FSI slave). As for FSI, its symbols and wire-protocol are not modelled at all. This is not necessary to get FSI off the ground thanks to the mapping of the CFAM address space onto the OPB address space - the models follow this directly and map the CFAM memory region into the OPB's memory region. Future work includes supporting more advanced accesses that drive the FSI master directly rather than indirectly via the CFAM mapping, which will require implementing the FSI state machine and methods for each of the FSI symbols on the slave. Further down the track we can also look at supporting the bitbanged SoftFSI drivers in Linux by extending the FSI slave model to resolve sequences of GPIO IRQs into FSI symbols, and calling the associated symbol method on the slave to map the access onto the CFAM. Testing: Tested by reading cfam config address 0 on rainier machine type. root@p10bmc:~# pdbg -a getcfam 0x0 p0: 0x0 = 0xc0022d15 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Ninad Palsule <ninad@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-01hw/arm/aspeed: Check for CPU types in machine_run_board_init()Philippe Mathieu-Daudé1-1/+2
Aspeed SoCs use a single CPU type (set as AspeedSoCClass::cpu_type). Convert it to a NULL-terminated array (of a single non-NULL element). Set MachineClass::valid_cpu_types[] to use the common machine code to provide hints when the requested CPU is invalid (see commit e702cbc19e ("machine: Improve is_cpu_type_supported()"). Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-01hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helperPhilippe Mathieu-Daudé1-0/+1
In order to alter AspeedSoCClass::cpu_type in the next commit, introduce the aspeed_soc_cpu_type() helper to retrieve the per-SoC CPU type from AspeedSoCClass. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-01-30include: Clean up includesPeter Maydell1-1/+0
This commit was created with scripts/clean-includes: ./scripts/clean-includes --git include include/*/*.h include/*/*/*.h All .c should include qemu/osdep.h first. The script performs three related cleanups: * Ensure .c files include qemu/osdep.h first. * Including it in a .h is redundant, since the .c already includes it. Drop such inclusions. * Likewise, including headers qemu/osdep.h includes is redundant. Drop these, too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-26hw/arm: add PCIe to Freescale i.MX6Nikita Ostrenkov1-21/+23
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com> Message-id: 20240108140325.1291-1-n.ostrenkov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-02-11 02:30:22 +0000