aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2015-09-09use qemu_cpu_kick instead of cpu_exit or qemu_cpu_kick_threadPaolo Bonzini1-1/+1
Use the same API to trigger interruption of a CPU, no matter if under TCG or KVM. There is no difference: these calls come from the CPU thread, so the qemu_cpu_kick calls will send a signal to the running thread and it will be processed synchronously, just like a call to cpu_exit. The only difference is in the overhead, but neither call to cpu_exit (now qemu_cpu_kick) is in a hot path. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09i8257: remove cpu_request_exit irqPaolo Bonzini10-76/+12
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: Richard henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09i8257: rewrite DMA_schedule to avoid hooking into the CPU loopPaolo Bonzini4-9/+15
The i8257 DMA controller uses an idle bottom half, which by default does not cause the main loop to exit. Therefore, the DMA_schedule function is there to ensure that the CPU relinquishes the iothread mutex to the iothread. However, this is not enough since the iothread will call aio_compute_timeout() and go to sleep again. In the iothread world, forcing execution of the idle bottom half is much simpler, and only requires a call to qemu_notify_event(). Do it, removing the need for the "cpu_request_exit" pseudo-irq. The next patch will remove it. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-07Added generic panic handler qemu_system_guest_panicked()Andrey Smetanin1-2/+1
There are pieces of guest panic handling code that can be shared in one generic function. These code replaced by call qemu_system_guest_panicked(). Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-25xlnx-zynqmp: Connect the four OCM banksAlistair Francis1-0/+15
The Xilinx EP108 has four separate OCM banks which are located adjacent to each other. This patch adds the four banks to the ZynqMP SoC. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-18Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell6-59/+117
* SCSI fixes from Stefan and Fam * vhost-scsi fix from Igor and Lu Lina * a build system fix from Daniel * two more multi-arch-related patches from Peter C. * TCG patches from myself and Sergey Fedorov * RCU improvement from Wen Congyang * a few more simple cleanups # gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: disas: Defeature print_target_address hw: fix mask for ColdFire UART command register scsi-generic: identify AIO callbacks more clearly scsi-disk: identify AIO callbacks more clearly scsi: create restart bottom half in the right AioContext configure: only add CONFIG_RDMA to config-host.h once qemu-nbd: remove unnecessary qemu_notify_event() vhost-scsi: Clarify vhost_virtqueue_mask argument exec: use macro ROUND_UP for alignment rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu() exec: drop cpu_can_do_io, just read cpu->can_do_io cpu_defs: Simplify CPUTLB padding logic cpu-exec: Do not invalidate original TB in cpu_exec_nocache() vhost/scsi: call vhost_dev_cleanup() at unrealize() time virtio-scsi-test: Add test case for tail unaligned WRITE SAME scsi-disk: Fix assertion failure on WRITE SAME tests: virtio-scsi: clear unit attention after reset scsi-disk: fix cmd.mode field typo virtio-scsi: use virtqueue_map_sg() when loading requests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-14hw: fix mask for ColdFire UART command registerPaolo Bonzini1-1/+1
The "miscellaneous commands" part of the register is 3 bits wide. Spotted by Coverity and confirmed in the datasheet, downloadable from http://cache.freescale.com/files/32bit/doc/ref_manual/MCF5307BUM.pdf (figure 14-6). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14scsi-generic: identify AIO callbacks more clearlyPaolo Bonzini1-25/+41
Functions that are not callbacks should assert that aiocb is NULL and have a SCSIGenericReq argument. AIO callbacks should assert that aiocb is not NULL. They also have an opaque argument. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14scsi-disk: identify AIO callbacks more clearlyPaolo Bonzini1-30/+61
Functions that are not callbacks should assert that aiocb is NULL and have a non-opaque argument (usually a pointer to SCSIDiskReq). AIO callbacks should assert that aiocb is not NULL and take care of calling block_acct done. They also have an opaque argument. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14scsi: create restart bottom half in the right AioContextPaolo Bonzini1-1/+2
This matches commit 4407c1c (virtio-blk: Schedule BH in the right context, 2014-06-17), which did the same thing for virtio-blk. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14vhost-scsi: Clarify vhost_virtqueue_mask argumentLu Lina1-1/+1
vhost_virtqueue_mask takes an "absolute" virtqueue index, while the code looks like it's passing an index that is relative to s->dev.vq_index. In reality, s->dev.vq_index is always zero, so this patch does not make any difference, but the code is clearer. Signed-off-by: Lu Lina <lina.lulina@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Message-Id: <1437978359-17960-1-git-send-email-arei.gonglei@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell1-2/+2
staging # gpg: Signature made Fri 14 Aug 2015 16:01:19 BST using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/net-pull-request: tests: test rx recovery from cont tests: introduce basic pci test for virtio-net net/vmxnet3: Fix incorrect debug message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150813' into stagingPeter Maydell1-0/+16
MIPS patches 2015-08-13 Changes: * mips32r5-generic CPU updated and renamed to P5600 * improvements in LWL/LDL, logging and fulong2e # gpg: Signature made Thu 13 Aug 2015 17:10:59 BST using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8DD3 2F98 5495 9D66 35D4 4FC0 5211 8E3C 0B29 DA6B * remotes/lalrae/tags/mips-20150813: target-mips: Use CPU_LOG_INT for logging related to interrupts hw/pci-host/bonito: Avoid buffer overrun for bad LDMA/COP accesses target-mips: simplify LWL/LDL mask generation target-mips: update mips32r5-generic into P5600 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13hw/pci-host/bonito: Avoid buffer overrun for bad LDMA/COP accessesPeter Maydell1-0/+16
The LDMA and COP memory regions represent four 32 bit registers each, but the memory regions themselves are 0x100 bytes large. Add guards to the read and write accessors so that bogus accesses beyond the four defined registers don't just run off the end of the bonldma and boncop structs and into whatever lies beyond. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell14-193/+171
virtio,pc,acpi fixes, cleanups Mostly cleanups, notably Eduardo's compat code rework, and smbios rearrangement for use by ARM. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 13 Aug 2015 12:59:16 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (24 commits) MAINTAINERS: list smbios maintainers smbios: move smbios code into a common folder smbios: remove dependency on x86 e820 tables smbios: extract x86 smbios building code into a function acpi: avoid potential uninitialized access to cpu_hp_io_base virtio-net: remove useless codes pci: allow 0 address for PCI IO/MEM regions pc: Remove redundant arguments from pc_memory_init() pc: Remove redundant arguments from pc_cmos_init() pc: Remove redundant arguments from *load_linux() pc: Use PCMachineState as pc_guest_info_init() argument pc: Move {above,below}_4g_mem_size variables to PCMachineState pc: Use PCMachineState for pc_memory_init() argument pc: Use PCMachineState for pc_cmos_init() argument pc: Eliminate pc_default_machine_options() pc: Eliminate pc_common_machine_options() pc: Move PCMachineClass, PCMachineState to qemu/typedefs.h pc: Rename pc_machine variables to pcms pc: Use error_abort when registering properties target-i386: Remove x86_cpu_compat_set_features() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13smbios: move smbios code into a common folderWei Huang7-7/+8
To share smbios among different architectures, this patch moves SMBIOS code (smbios.c and smbios.h) from x86 specific folders into new hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in x86 default config files. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13smbios: remove dependency on x86 e820 tablesWei Huang2-8/+24
Current smbios builds type 19 table from e820, which is x86 specific. This patch removes smbios' dependency on e820 by passing an array of memory area to smbios_get_tables(). Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13smbios: extract x86 smbios building code into a functionWei Huang1-16/+22
This patch extracts out the procedure of buidling x86 SMBIOS tables into a dedicated function. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13acpi: avoid potential uninitialized access to cpu_hp_io_baseDaniel P. Berrange1-0/+1
When building QEMU with Mingw64 toolchain I see a warning CC x86_64-softmmu/hw/i386/acpi-build.o hw/i386/acpi-build.c: In function 'acpi_build': hw/i386/acpi-build.c:1138:9: warning: 'pm.cpu_hp_io_base' may be used uninitialized in this function [-Wmaybe-uninitialized] aml_append(crs, ^ hw/i386/acpi-build.c:1666:16: note: 'pm.cpu_hp_io_base' was declared here AcpiPmInfo pm; ^ In acpi_get_pm_info() some of the fields are pre-initialized to 0, but this one was missed. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-08-13virtio-net: remove useless codesJason Wang1-6/+2
After commit 40bad8f3deba15e2074ff34cfe923c12916b1cc5("virtio-net: fix used len for tx"), async_tx.len was no longer used afterwards. So remove useless codes with it. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pci: allow 0 address for PCI IO/MEM regionsLaurent Vivier2-3/+10
Some kernels program a 0 address for io regions. PCI 3.0 spec section 6.2.5.1 doesn't seem to disallow this. based on patch by Michael Roth <mdroth@linux.vnet.ibm.com> Add pci_allow_0_addr in MachineClass to conditionally allow addr 0 for pseries, as this can break other architectures. This patch allows to hotplug PCI card in pseries machine, as the first added card BAR0 is always set to 0 address. This as a temporary hack, waiting to fix PCI memory priorities for more machine types... Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Remove redundant arguments from pc_memory_init()Eduardo Habkost3-11/+9
Remove arguments that can be found in PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Remove redundant arguments from pc_cmos_init()Eduardo Habkost3-17/+9
Remove arguments that can be found in PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Remove redundant arguments from *load_linux()Eduardo Habkost2-21/+13
Remove arguments that can be found in PCMachineState. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Use PCMachineState as pc_guest_info_init() argumentEduardo Habkost3-8/+5
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Move {above,below}_4g_mem_size variables to PCMachineStateEduardo Habkost2-23/+27
This will make the info readily available for the other initialization functions, and will allow us to simplify their argument list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Use PCMachineState for pc_memory_init() argumentEduardo Habkost3-4/+4
pc_memory_init() already expects a PCMachineState object, there's no point in upcasting it to MachineState before calling the function. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Use PCMachineState for pc_cmos_init() argumentEduardo Habkost3-9/+11
pc_cmos_init() already expects a PCMachineState object, there's no point in upcasting it to MachineState before calling the function. While doing it, reorder the arguments so PCMachineState is the first function argument. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Eliminate pc_default_machine_options()Eduardo Habkost3-2/+2
The only PC machines that didn't call pc_default_machine_options() were isaps and xenfv. Both were already overwriting max_cpus, and only isapc was not overwriting hot_add_cpu. After making isapc set hot_add_cpu to NULL, we can move the pc_default_machine_options() code the PC common class_init. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Eliminate pc_common_machine_options()Eduardo Habkost2-2/+1
All TYPE_PC_MACHINE subclasses call pc_common_machine_options(). TYPE_PC_MACHINE can simply initialize the common options on class_init directly. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Rename pc_machine variables to pcmsEduardo Habkost3-22/+22
Make the code use the same variable name everywhere. "pcms" is already being used in existing code and it's shorter. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Use error_abort when registering propertiesEduardo Habkost1-8/+8
No errors should happen when registering the properties, but we shouldn't silently ignore them if they happen. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13pc: Use PC_COMPAT_* for CPUID feature compatibilityEduardo Habkost2-44/+0
Now we can use compat_props to keep CPUID feature compatibility, using the boolean QOM properties for CPUID feature flags. This simplifies the compatibility code, and reduces duplication between pc_piix.c and pc_q35.c. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13piix: Document coreboot-specific RAM size config registerEduardo Habkost1-1/+6
The existing i440fx initialization code sets a PCI config register that isn't documented anywhere in the Intel 440FX datasheet. Register 0x57 is DRAMC (DRAM Control) and has nothing to do with the RAM size. This was implemented in commit ec5f92ce6ac8ec09056be77e03c941be188648fa because old coreboot code tried to read registers 0x5a-0x5f,0x56,0x57 to get the RAM size from QEMU, but I couldn't find out why coreboot did that. I assume it was a mistake, and the original code was supposed to be reading the DRB[0-7] registers (offsets 0x60-0x67). Document that coreboot-specific register offset in a macro and a comment, for future reference. Cc: Ed Swierk <eswierk@skyportsystems.com> Cc: Richard Smith <smithbone@gmail.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13make: load only required dependency files.Victor Kaplansky1-1/+7
The old rules.mak loads dependency .d files using include directive with file glob pattern "*.d". This breaks the build when build tree has left-over *.d files from another build. This patch fixes this by - loading precise list of .d files made from *.o and *.mo. - specifying explicit list of required dependency info files for *.hex autogenerated sources. Note that Makefile still includes some .d in root directory by including "*.d". Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13make: fix where dependency *.d are stored.Victor Kaplansky2-1/+1
In rules like "bar/%.o: %.c" there is a difference between $(*D) and $(@D). $(*D) expands to '.', while $(@D) expands to 'bar'. It is cleaner to generate *.d in the same directory where appropriate *.o resides. This allows precise including of dependency info from .d files. As a hack, we also touch two sources for generated *.hex files. Without this hack, anyone doing "git pull; make" will not get *.hex rebuilt correctly since the dependency file would be missing. Signed-off-by: Victor Kaplansky <victork@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13i.MX: Fix UART driver to work with unitialized "chardev" deviceJean-Christophe Dubois1-2/+6
The "chardev" property initialization might have failed (for example because there are not enough chardevs provided by QEMU). The serial device emulator needs to be able to work with an uninitialized (NULL) chardev device pointer. This patch adds some missing tests on the chr pointer value before using it. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1438342461-18967-1-git-send-email-jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13hw/cpu/a15mpcore: Wire up hyp and secure physical timer interruptsPeter Maydell1-7/+14
Since we now support both the hypervisor and the secure physical timer, wire their interrupt lines up in the a15mpcore wrapper object. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1437047249-2357-5-git-send-email-peter.maydell@linaro.org Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-08-13hw/arm/virt: Wire up secure timer interruptPeter Maydell1-13/+15
Wire up the secure timer interrupt. Since we've defined that the plain old physical timer is the NS timer, we can drop the now-out-of-date comment about QEMU not having TZ. Use a data-driven loop to wire up the timer interrupts, since we now have four of them and the code is the same for each. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1437047249-2357-4-git-send-email-peter.maydell@linaro.org Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-08-13Introduce gic_class_name() instead of repeating conditionPavel Fedin2-10/+5
This small inline returns correct GIC class name depending on whether we use KVM acceleration or not. Avoids duplicating the condition everywhere. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 4f26901be9b844b563673ce3ad08eeedbb7a7132.1438758065.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13hw/arm/gic: Kill code duplicationPavel Fedin3-72/+61
Extracted duplicated initialization code from SW-emulated and KVM GIC implementations and put into gic_init_irqs_and_mmio() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-id: 8ea5b2781ef39cb5989420987fc73c70e377687d.1438758065.git.p.fedin@samsung.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Fix Coding style for GPT emulatorJean-Christophe Dubois1-3/+3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: cc7d1589e774e87c346b75a6c25e07957f436ced.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split GPT emulator in a header file and a source fileJean-Christophe Dubois1-76/+3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: e32fba56b9dae3cc7c83726550514b2d0c890ae0.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Fix Coding style for EPIT emulatorJean-Christophe Dubois1-6/+6
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: d8d70683c6a48ac318c1635595619cfb0eb31681.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split EPIT emulator in a header file and a source fileJean-Christophe Dubois1-49/+3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 948927cab0c85da9a753c5f6d5501323d5604c8e.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Fix Coding style for CCM emulatorJean-Christophe Dubois1-6/+5
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: ff0b6720b1c55204e663f07be47c0203f6871084.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split CCM emulator in a header file and a source fileJean-Christophe Dubois2-68/+4
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b1d6f990229b2608bbaba24f4ff359571c0b07da.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Fix Coding style for AVIC emulator.Jean-Christophe Dubois1-9/+7
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 01e1d9026220992405819f25640ebd5bb843fc93.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX: Split AVIC emulator in a header file and a source fileJean-Christophe Dubois2-38/+5
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 06829257e845d693be05c7d491134313c1615d1a.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13i.MX:Fix Coding style for UART emulator.Jean-Christophe Dubois1-17/+17
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 23ab872b7cd30b1399384fb26a2ebb75e9761d7b.1437080501.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-08-21 15:52:56 +0000