aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)AuthorFilesLines
2020-09-14hw/arm/npcm7xx: add board setup stub for CPU and UART clocksHavard Skinnemoen1-0/+32
When booting directly into a kernel, bypassing the boot loader, the CPU and UART clocks are not set up correctly. This makes the system appear very slow, and causes the initrd boot test to fail when optimization is off. The UART clock must run at 24 MHz. The default 25 MHz reference clock cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works perfectly with the default /20 divider. The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs at 800 MHz by default, so we need to double the feedback divider as well to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz). We don't bother checking for PLL lock because we know our emulated PLLs lock instantly. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-13-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsjHavard Skinnemoen1-0/+20
This allows these NPCM7xx-based boards to boot from a flash image, e.g. one built with OpenBMC. For example like this: IMAGE=${OPENBMC}/build/tmp/deploy/images/gsj/image-bmc qemu-system-arm -machine quanta-gsj -nographic \ -drive file=${IMAGE},if=mtd,bus=0,unit=0,format=raw,snapshot=on Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200911052101.2602693-12-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/ssi: NPCM7xx Flash Interface Unit device modelHavard Skinnemoen5-0/+643
This implements a device model for the NPCM7xx SPI flash controller. Direct reads and writes, and user-mode transactions have been tested in various modes. Protection features are not implemented yet. All the FIU instances are available in the SoC's address space, regardless of whether or not they're connected to actual flash chips. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-11-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/mem: Stubbed out NPCM7xx Memory Controller modelHavard Skinnemoen3-0/+91
This just implements the bare minimum to cause the boot block to skip memory initialization. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-10-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/nvram: NPCM7xx OTP device modelHavard Skinnemoen3-0/+470
This supports reading and writing OTP fuses and keys. Only fuse reading has been tested. Protection is not implemented. Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-9-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Load -bios image as a boot ROM for npcm7xxHavard Skinnemoen1-0/+32
If a -bios option is specified on the command line, load the image into the internal ROM memory region, which contains the first instructions run by the CPU after reset. If -bios is not specified, the vbootrom included with qemu is loaded by default. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-8-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add two NPCM7xx-based machinesHavard Skinnemoen2-1/+146
This adds two new machines, both supported by OpenBMC: - npcm750-evb: Nuvoton NPCM750 Evaluation Board. - quanta-gsj: A board with a NPCM730 chip. They rely on the NPCM7xx SoC device to do the heavy lifting. They are almost completely identical at the moment, apart from the SoC type, which currently only changes the reset contents of one register (GCR.MDLR), but they might grow apart a bit more as more functionality is added. Both machines can boot the Linux kernel into /bin/sh. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-6-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: Add NPCM730 and NPCM750 SoC modelsHavard Skinnemoen3-0/+413
The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/timer: Add NPCM7xx Timer device modelHavard Skinnemoen3-0/+549
The NPCM730 and NPCM750 SoCs have three timer modules each holding five timers and some shared registers (e.g. interrupt status). Each timer runs at 25 MHz divided by a prescaler, and counts down from a configurable initial value to zero. When zero is reached, the interrupt flag for the timer is set, and the timer is disabled (one-shot mode) or reloaded from its initial value (periodic mode). This implementation is sufficient to boot a Linux kernel configured for NPCM750. Note that the kernel does not seem to actually turn on the interrupts. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-4-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen3-0/+271
Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen4-0/+279
Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm: versal-virt: Correct the tx/rx GEM clocksEdgar E. Iglesias1-1/+1
Correct the GEMs tx/rx clocks to use the 125Mhz fixed-clock. This matches the setup with the fixed-link 100Mbit PHY. It also avoids the following warnings from the Linux kernel driver: eth0: unable to generate target frequency: 125000000 Hz Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20200909174647.662864-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/arm/mps2: New board model mps2-an500Peter Maydell1-10/+55
Implement a model of the MPS2 with the AN500 firmware. This is similar to the AN385, with the following differences: * Cortex-M7 CPU * PSRAM is at 0x6000_0000 * Ethernet is at 0xa000_0000 * No zbt_boot_ctrl remapping of the low 16K (but QEMU doesn't implement this anyway) * no "block RAM" at 0x01000000 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
2020-09-14hw/arm/mps2: New board model mps2-an386Peter Maydell1-5/+29
Implement a model of the MPS2 with the AN386 firmware. This is essentially identical to the AN385 firmware, but it has a Cortex-M4 rather than a Cortex-M3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
2020-09-14hw/timer/armv7m_systick: assert that board code set system_clock_scalePeter Maydell1-0/+8
It is the responsibility of board code for an armv7m system to set system_clock_scale appropriately for the CPU speed of the core. If it forgets to do this, then QEMU will hang if the guest tries to use the systick timer in the "tick at the CPU clock frequency" mode. We forgot that in a couple of our boards (see commits ce4f70e81ed23c93f, e7e5a9595ab1136). Add an assertion in the systick reset method so we don't let any new boards in with the same bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200825160847.18091-1-peter.maydell@linaro.org
2020-09-14hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)Philippe Mathieu-Daudé1-0/+6
Report unimplemented register accesses using qemu_log_mask(UNIMP). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fieldsPhilippe Mathieu-Daudé1-11/+5
This model implementation is designed for 32-bit accesses. We can simplify setting the MemoryRegionOps::impl min/max fields to 32-bit (memory::access_with_adjusted_size() will take care of the 8/16-bit accesses). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fieldsPhilippe Mathieu-Daudé1-16/+5
Per the datasheet (DDI0407 r2p0): "All SCU registers are byte accessible" and are 32-bit aligned. Set MemoryRegionOps::valid min/max fields and simplify the write() handler. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Do not allow invalid CPU countPhilippe Mathieu-Daudé1-5/+13
Per the datasheet (DDI0407 r2p0): "The SCU connects one to four Cortex-A9 processors to the memory system through the AXI interfaces." Change the instance_init() handler to a device_realize() one so we can verify the property is in range, and return an error to the caller if not. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-13Merge remote-tracking branch ↵Peter Maydell41-87/+1300
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell2-2/+2
'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging Various misc and testing fixes: - Expand CODING_STYLE.rst a little more - usb-host build fix - allow check-softfloat unit tests without TCG - simplify mips imm_branch so compiler isn't confused - mark ppc64abi32 for deprecation - more compiler soothing in pch_rev_id - allow acceptance to skip missing binaries - more a bunch of plugins to contrib # gpg: Signature made Thu 10 Sep 2020 10:51:05 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-fixes-100920-1: plugins: move the more involved plugins to contrib tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True) tests: bump avocado version hw/i386: make explicit clearing of pch_rev_id configure: don't enable ppc64abi32-linux-user by default docs/system/deprecated: mark ppc64abi32-linux-user for deprecation target/mips: simplify gen_compute_imm_branch logic tests/meson.build: fp tests don't need CONFIG_TCG usb-host: restrict workaround to new libusb versions CODING_STYLE.rst: flesh out our naming conventions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-12Merge remote-tracking branch ↵Peter Maydell13-39/+20
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11util/hexdump: Reorder qemu_hexdump() argumentsPhilippe Mathieu-Daudé5-5/+5
qemu_hexdump()'s pointer to the buffer and length of the buffer are closely related arguments but are widely separated in the argument list order (also, the format of <stdio.h> function prototypes is usually to have the FILE* argument coming first). Reorder the arguments as "fp, prefix, buf, size" which is more logical. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11util/hexdump: Convert to take a void pointer argumentPhilippe Mathieu-Daudé4-4/+4
Most uses of qemu_hexdump() do not take an array of char as input, forcing use of cast. Since we can use this helper to dump any kind of buffer, use a pointer to void argument instead. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11hw/arm/pxa2xx: Add missing fallthrough commentThomas Huth1-1/+1
Let's make this file compilable with -Werror=implicit-fallthrough : Looking at the code, it seems like the fallthrough is intended here, so we should add the corresponding "/* fallthrough */" comment here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200911121844.404434-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11Merge remote-tracking branch ↵Peter Maydell368-1669/+2391
'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-10hw: hyperv: vmbus: Fix 32bit compilationJon Doron1-1/+2
Fix 32-bit build error for vmbus: hw/hyperv/vmbus.c: In function ‘gpadl_iter_io’: hw/hyperv/vmbus.c:383:13: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 383 | p = (void *)(((uintptr_t)iter->map & TARGET_PAGE_MASK) | off_in_page); | ^ cc1: all warnings being treated as errors Fixes: 0d71f7082d7 ("vmbus: vmbus implementation") Signed-off-by: Jon Doron <arilou@gmail.com> Tested-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Message-Id: <20200715084326.678715-3-arilou@gmail.com> [lv: updated with commit description from <20200906050113.2783642-1-richard.henderson@linaro.org>] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-10hw/net/e1000e: Remove duplicated write handler for FLSWDATA registerPhilippe Mathieu-Daudé1-1/+0
The FLSWDATA register writeop handler is initialized twice: 3067 #define e1000e_putreg(x) [x] = e1000e_mac_writereg 3068 typedef void (*writeops)(E1000ECore *, int, uint32_t); 3069 static const writeops e1000e_macreg_writeops[] = { .... 3102 e1000e_putreg(FLSWDATA), .... 3145 e1000e_putreg(FLSWDATA), To avoid confusion, remove the duplicated initialization. Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200904131402.590055-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-10hw/net/e1000e: Remove overwritten read handler for STATUS registerPhilippe Mathieu-Daudé1-1/+0
The STATUS register readop handler is initialized first with the generic e1000e_mac_readreg() handler: 2861 #define e1000e_getreg(x) [x] = e1000e_mac_readreg 2862 typedef uint32_t (*readops)(E1000ECore *, int); 2863 static const readops e1000e_macreg_readops[] = { .... 2919 e1000e_getreg(STATUS), Then overwritten with the specific e1000e_get_status handler: 3018 [STATUS] = e1000e_get_status, To avoid confusion, remove the overwritten initialization. 6f3fbe4ed0 ("net: Introduce e1000e device emulation") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200904131402.590055-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-10hw/i386: make explicit clearing of pch_rev_idAlex Bennée1-1/+1
Some compilers (notably the Xenial gcc in Travis) fail to spot that this will always be set if pch_dev_id != 0xffff. Given this is setup code and using _Pragma to override is equally as ugly lets just remove the doubt from the compilers mind. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200909112742.25730-8-alex.bennee@linaro.org>
2020-09-10usb-host: restrict workaround to new libusb versionsGerd Hoffmann1-1/+1
Fixes build failures with old kernels (USBDEVFS_GET_SPEED missing), on the assumtion that distros with old kernels also have old libusb. Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200902081445.3291-1-kraxel@redhat.com> Message-Id: <20200909112742.25730-3-alex.bennee@linaro.org>
2020-09-09hw/riscv: Sort the Kconfig options in alphabetical orderBin Meng1-29/+29
At present the Kconfig file is in disorder. Let's sort the options. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-13-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Drop CONFIG_SIFIVEBin Meng1-9/+5
The name SIFIVE is too vague to convey the required component of MSI_NONBROKEN. Let's drop the option, and select MSI_NONBROKEN in each machine instead. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Always build riscv_hart.cBin Meng2-10/+1
Every RISC-V machine needs riscv_hart hence there is no need to have a dedicated Kconfig option for it. Drop the Kconfig option and always build riscv_hart.c. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng6-3/+7
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_uart model to hw/charBin Meng7-4/+9
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_uart model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-9-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move riscv_htif model to hw/charBin Meng6-6/+6
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_plic model to hw/intcBin Meng10-6/+95
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_plic model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-7-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_clint model to hw/intcBin Meng10-7/+15
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_gpio model to hw/gpioBin Meng8-10/+13
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_gpio model to hw/gpio directory. Note this also removes the trace-events in the hw/riscv directory, since gpio is the only supported trace target in that directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-5-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_otp model to hw/miscBin Meng5-2/+6
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_prci model to hw/miscBin Meng5-2/+6
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_e_prci model to hw/miscBin Meng6-3/+9
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: sifive_u: Connect a DMA controllerBin Meng2-0/+31
SiFive FU540 SoC integrates a platform DMA controller with 4 DMA channels. This connects the exsiting SiFive PDMA model to the SoC, and adds its device tree data as well. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-17-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng6-16/+28
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Hook GPIO controllersBin Meng1-0/+14
Microchip PolarFire SoC integrates 3 GPIOs controllers. It seems enough to create unimplemented devices to cover their register spaces at this point. With this commit, QEMU can boot to U-Boot (2nd stage bootloader) all the way to the Linux shell login prompt, with a modified HSS (1st stage bootloader). For detailed instructions on how to create images for the Icicle Kit board, please check QEMU RISC-V WiKi page at: https://wiki.qemu.org/Documentation/Platforms/RISCV Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-15-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMsBin Meng1-0/+39
Microchip PolarFire SoC integrates 2 Candence GEMs to provide IEEE 802.3 standard-compliant 10/100/1000 Mbps ethernet interface. On the Icicle Kit board, GEM0 connects to a PHY at address 8 while GEM1 connects to a PHY at address 9. The 2nd stage bootloader (U-Boot) is using GEM1 by default, so we must specify 2 '-nic' options from the command line in order to get a working ethernet. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1598924352-89526-14-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23Bin Meng4-3/+7
When cadence_gem model was created for Xilinx boards, the PHY address was hard-coded to 23 in the GEM model. Now that we have introduced a property we can use that to tell GEM model what our PHY address is. Change all boards' GEM 'phy-addr' property value to 23, and set the PHY address default value to 0 in the GEM model. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-13-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/net: cadence_gem: Add a new 'phy-addr' propertyBin Meng1-2/+3
At present the PHY address of the PHY connected to GEM is hard-coded to either 23 (BOARD_PHY_ADDRESS) or 0. This might not be the case for all boards. Add a new 'phy-addr' property so that board can specify the PHY address for each GEM instance. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-12-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: microchip_pfsoc: Connect a DMA controllerBin Meng2-0/+16
On the Icicle Kit board, the HSS firmware utilizes the on-chip DMA controller to move the 2nd stage bootloader in the system memory. Let's connect a DMA controller to Microchip PolarFire SoC. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-11-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.1 at 2024-11-03 12:41:31 +0000