aboutsummaryrefslogtreecommitdiff
path: root/hw/usb/hcd-ehci-pci.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-13hw: Use device_class_set_legacy_reset() instead of opencodingPeter Maydell1-1/+1
Use device_class_set_legacy_reset() instead of opencoding an assignment to DeviceClass::reset. This change was produced with: spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/device-reset.cocci \ --keep-comments --smpl-spacing --in-place --dir hw Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240830145812.1967042-8-peter.maydell@linaro.org
2024-02-20hw/usb/ehci: Rename NB_PORTS -> EHCI_PORTSPhilippe Mathieu-Daudé1-1/+1
Rename NB_PORTS as EHCI_PORTS to avoid definition clash with UHCI equivalent: hw/usb/hcd-ehci.h:40:9: error: 'NB_PORTS' macro redefined [-Werror,-Wmacro-redefined] #define NB_PORTS 6 /* Max. Number of downstream ports */ ^ hw/usb/hcd-uhci.h:38:9: note: previous definition is here #define NB_PORTS 2 ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-12-30hw/usb: Constify VMStateRichard Henderson1-1/+1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-59-richard.henderson@linaro.org>
2023-06-09hw/usb/hcd-ehci-pci: Simplify using DEVICE_GET_CLASS() macroPhilippe Mathieu-Daudé1-1/+1
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2020-05-15qdev: Unrealize must not failMarkus Armbruster1-1/+1
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-1/+1
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster1-0/+1
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-01-30hw/usb: Fix LGPL information in the file headersThomas Huth1-2/+2
It's either "GNU *Library* General Public version 2" or "GNU Lesser General Public version *2.1*", but there was no "version 2.0" of the "Lesser" library. So assume that version 2.1 is meant here. Additionally, suggest that the user should have received a copy of the LGPL, and not the GPL here. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1548254454-7659-1-git-send-email-thuth@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-01-08usb: move ehci_create_ich9_with_companions to hw/i386Paolo Bonzini1-53/+0
This function is only needed when Q35 is in use. Moving it to the same file that uses it lets you disable the entire USB subsystem in x86_64-softmmu.mak; of course doing that will cause -usb to break horribly, but one thing at a time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost1-0/+4
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-21usb: ehci: fix memory leak in ehciLi Qiang1-0/+9
In usb_ehci_init function, it initializes 's->ipacket', but there is no corresponding function to free this. As the ehci can be hotplug and unplug, this will leak host memory leak. In order to make the hierarchy clean, we should add a ehci pci finalize function, then call the clean function in ehci device. Signed-off-by: Li Qiang <liqiang6-s@360.cn> Message-id: 589a85b8.3c2b9d0a.b8e6.1434@mx.google.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-01-29usb: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-20-git-send-email-peter.maydell@linaro.org
2015-09-11maint: avoid useless "if (foo) free(foo)" patternMarkus Armbruster1-4/+2
My Coccinelle semantic patch finds a few more, because it also fixes up the equally pointless conditional if (foo) { free(foo); foo = NULL; } Result (feel free to squash it into your patch): Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-20ehci: fix segfault when hot-unplugging ehci controllerGonglei1-0/+10
When hot-unplugging the usb controllers (ehci/uhci), we have to clean all resouce of these devices, involved registered reset handler. Otherwise, it may cause NULL pointer access and/or segmentation fault if we reboot the guest os after hot-unplugging. Let's hook up reset via DeviceClass->reset() and drop the qemu_register_reset() call. Then Qemu will register and unregister the reset handler automatically. Cc: qemu-stable <qemu-stable@nongnu.org> Reported-by: Lidonglin <lidonglin@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster1-4/+2
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-09-23usb: tag standalone ehci as hotpluggableGerd Hoffmann1-1/+11
Add a flag to EHCIPCIInfo saying whenever the controller supports companions or not. Make sure we only allow registering companions for ehci versions supporting that. Enable pci hotplug for the ehci variants not supporting companions. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29usb-ehci: add ehci-pci device exit functionGonglei1-0/+14
clean up ehci resource when ehci pci device exit. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-14savevm: Remove all the unneeded version_minimum_id_old (usb)Juan Quintela1-1/+1
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov1-1/+1
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14hw: set interrupts using pci irq wrappersMarcel Apfelbaum1-1/+1
pci_set_irq and the other pci irq wrappers use PCI_INTERRUPT_PIN config register to compute device INTx pin to assert/deassert. An irq is allocated using pci_allocate_irq wrapper only if is needed by non pci devices. Removed irq related fields from state if not used anymore. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum1-0/+2
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-24usb/hcd-ehci: Replace PORTSC macros with variablesKuo-Jung Su1-0/+2
Replace PORTSC macros with variables which could then be configured in ehci_xxxx_class_init(...) Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci: Split off instance_init from realizeAndreas Färber1-5/+14
This makes the mem MemoryRegion available to derived instance_inits. Keep the bus in realize for now since naming breaks in instance_init. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci-sysbus: Convert to QOM realizeAndreas Färber1-1/+1
The SysBus qdev initfn merely calls SysBusDeviceClass::init, so we can replace it with a realizefn already. This avoids getting into any initfn ambiguity with the upcoming Faraday EHCI implementation. Rename internal usb_ehci_initfn() to usb_ehci_realize() to allow to return Errors from common initialization code as well. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-20dma: eliminate DMAContextPaolo Bonzini1-2/+2
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-07usb/ehci: Clean up SysBus and PCI EHCI splitAndreas Färber1-15/+24
SysBus EHCI was introduced in a hurry before 1.3 Soft Freeze. To use QOM casts in place of DO_UPCAST() / FROM_SYSBUS(), we need an identifying type. Introduce generic abstract base types for PCI and SysBus EHCI to allow multiple types to access the shared fields. While at it, move the state structs being amended with macros to the header file so that they can be embedded. The VMSTATE_PCI_DEVICE() macro does not play nice with the QOM parent_obj naming convention, so defer that cleanup. Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17pci: update all users to look in pci/Michael S. Tsirkin1-1/+1
update all users so we can remove the makefile hack. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-11-29usb: tag usb host adapters as not hotpluggable.Gerd Hoffmann1-0/+1
Hotplugging them simply doesn't work, so tag them accordingly to avoid users trying and then crashing qemu. For xhci there is nothing fundamental which prevents hotplug from working, we'll "only" need a exit() function which cleans up everything properly. That isn't for 1.3 though. For ehci+uhci+ohci hotplug can't be supported until qemu gains the capability to hotplug multifunction pci devices. https://bugzilla.redhat.com/show_bug.cgi?id=879096 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-16ehci: handle dma errorsGerd Hoffmann1-0/+17
Starting with commit 1c380f9460522f32c8dd2577b2a53d518ec91c6d dma transfers can actually fail. This patch makes ehci keep track of the busmaster bit in pci config space, by setting/clearing the dma_context pointer. Attempts to dma without context will result in raising HSE (Host System Error) interrupt and stopping the host controller. This patch fixes WinXP not booting with a usb stick attached to ehci. Root cause is seabios activating ehci so you can boot from the stick, and WinXP clearing the busmaster bit before resetting the host controller, leading to ehci actually trying dma while it is disabled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-09ehci: fix migrationGerd Hoffmann1-1/+2
Commit 5010d4dc618b6b8e7c21129c487c06f6493f71fc reorganized vmstate to split core + pci, but got two little details wrong. Fix them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01usb/ehci-pci: add helper to create ich9 usb controllersGerd Hoffmann1-0/+53
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01usb/ehci-pci: add ich9 00:1a.* variantGerd Hoffmann1-1/+6
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01usb/ehci-pci: dynamic type generationGerd Hoffmann1-31/+35
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-11-01usb/ehci: split into multiple source filesGerd Hoffmann1-0/+138
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.1 at 2024-09-27 20:21:23 +0000