aboutsummaryrefslogtreecommitdiff
path: root/hw/sparc/sun4m.c
AgeCommit message (Collapse)AuthorFilesLines
2024-02-15hw/sparc/sun4m: Realize DMA controller before accessing itPhilippe Mathieu-Daudé1-2/+5
We should not wire IRQs on unrealized device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213130341.1793-9-philmd@linaro.org>
2024-02-02hw/sparc/sun4m: use qemu_find_nic_info()David Woodhouse1-6/+14
Obtain the MAC address from the NIC configuration if there is one, or generate one explicitly so that it can be placed in the PROM. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-01-05hw/sparc: Simplify memory_region_init_ram_nomigrate() callsPhilippe Mathieu-Daudé1-15/+6
Mechanical change using the following coccinelle script: @@ expression mr, owner, arg3, arg4, errp; @@ - memory_region_init_ram_nomigrate(mr, owner, arg3, arg4, &errp); if ( - errp + !memory_region_init_ram_nomigrate(mr, owner, arg3, arg4, &errp) ) { ... return; } and removing the local Error variable. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Message-Id: <20231120213301.24349-23-philmd@linaro.org>
2024-01-05hw: Simplify accesses to the CPUState::'start-powered-off' propertyPhilippe Mathieu-Daudé1-1/+1
The 'start-powered-off' property has been added to ARM CPUs in commit 5de164304a ("arm: Allow secondary KVM CPUs to be booted via PSCI"), then eventually got generalized to all CPUs in commit c1b701587e ("target/arm: Move start-powered-off property to generic CPUState"). Since all CPUs have it, no need to check whether it is available. Updating this property can't fail, so use &error_abort. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20231123143813.42632-5-philmd@linaro.org>
2023-06-05bulk: Remove pointless QOM castsPhilippe Mathieu-Daudé1-2/+2
Mechanical change running Coccinelle spatch with content generated from the qom-cast-macro-clean-cocci-gen.py added in the previous commit. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230601093452.38972-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-12machine: make memory-backend a link propertyPaolo Bonzini1-3/+2
Handle HostMemoryBackend creation and setting of ms->ram entirely in machine_run_board_init. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220414165300.555321-5-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12machine: use QAPI struct for boot configurationPaolo Bonzini1-2/+2
As part of converting -boot to a property with a QAPI type, define the struct and use it throughout QEMU to access boot configuration. machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by hand, for now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220414165300.555321-2-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-09Warn user if the vga flag is passed but no vga device is createdGautam Agrawal1-0/+2
A global boolean variable "vga_interface_created"(declared in softmmu/globals.c) has been used to track the creation of vga interface. If the vga flag is passed in the command line "default_vga"(declared in softmmu/vl.c) variable is set to 0. To warn user, the condition checks if vga_interface_created is false and default_vga is equal to 0. If "-vga none" is passed, this patch will not warn the user regarding the creation of VGA device. The warning "A -vga option was passed but this machine type does not use that option; no VGA device has been created" is logged if vga flag is passed but no vga device is created. This patch has been tested for x86_64, i386, sparc, sparc64 and arm boards. Signed-off-by: Gautam Agrawal <gautamnagrawal@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/581 Message-Id: <20220501122505.29202-1-gautamnagrawal@gmail.com> [thuth: Fix wrong warning with "-device" in some cases as reported by Paolo] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-08sun4m: fix setting CPU id when more than one CPU is presentMark Cave-Ayland1-1/+1
Commit 24f675cd3b ("sparc/sun4m: Use start-powered-off CPUState property") changed the sun4m CPU reset code to use the start-powered-off property and so split the creation of the CPU into separate instantiation and realization phases to enable the new start-powered-off property to be set. This accidentally broke sun4m machines with more than one CPU present since sparc_cpu_realizefn() sets a default CPU id, and now that realization occurs after calling cpu_sparc_set_id() in cpu_devinit() the CPU id gets reset back to the default instead of being uniquely encoded based upon the CPU number. As soon as another CPU is brought online, the OS gets confused between them and promptly panics. Resolve the issue by moving the cpu_sparc_set_id() call in cpu_devinit() to after the point where the CPU device has been realized as before. Fixes: 24f675cd3b ("sparc/sun4m: Use start-powered-off CPUState property") Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210825095100.20180-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc*: Move cpu_check_irqs() to target/sparc/Philippe Mathieu-Daudé1-32/+0
Since cpu_check_irqs() doesn't reference to anything outside of CPUSPARCState, it better belongs to the architectural code in target/, rather than the hardware specific code in hw/. Note: while we moved the trace events, we don't rename them. Remark: this allows us to build the leon3 machine stand alone, fixing this link failure (because cpu_check_irqs is defined in hw/sparc/sun4m.c which is only built when CONFIG_SUN4M is selected): /usr/bin/ld: target_sparc_win_helper.c.o: in function `cpu_put_psr': target/sparc/win_helper.c:91: undefined reference to `cpu_check_irqs' Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210428141655.387430-5-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Move each sun4m_hwdef definition in its class_initPhilippe Mathieu-Daudé1-130/+118
Remove the sun4m_hwdefs[] array by moving assigning the structure fields directly in each machine class_init() function. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-7-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Fix code style for checkpatch.plPhilippe Mathieu-Daudé1-9/+9
We are going to move this code, fix its style first. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-6-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Register machine types in sun4m_machine_types[]Philippe Mathieu-Daudé1-64/+36
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-5-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Factor out sun4m_machine_class_init()Philippe Mathieu-Daudé1-95/+8
Factor out the class_init code common to all machines to sun4m_machine_class_init(). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-4-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Introduce Sun4mMachineClassPhilippe Mathieu-Daudé1-11/+39
Instead of passing the sun4m_hwdef structure via machine_init(), store it into the MachineClass. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-3-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-05-04hw/sparc/sun4m: Have sun4m machines inherit new TYPE_SUN4M_MACHINEPhilippe Mathieu-Daudé1-9/+21
Introduce the TYPE_SUN4M_MACHINE and have all sun4m machines inherit it. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20210503171303.822501-2-f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-03-19hw: Replace anti-social QOM type namesMarkus Armbruster1-6/+6
Several QOM type names contain ',': ARM,bitband-memory etraxfs,pic etraxfs,serial etraxfs,timer fsl,imx25 fsl,imx31 fsl,imx6 fsl,imx6ul fsl,imx7 grlib,ahbpnp grlib,apbpnp grlib,apbuart grlib,gptimer grlib,irqmp qemu,register SUNW,bpp SUNW,CS4231 SUNW,DBRI SUNW,DBRI.prom SUNW,fdtwo SUNW,sx SUNW,tcx xilinx,zynq_slcr xlnx,zynqmp xlnx,zynqmp-pmu-soc xlnx,zynq-xadc These are all device types. They can't be plugged with -device / device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one actually works. They *can* be used with -device / device_add to request help. Usability is poor, though: you have to double the comma, like this: $ qemu-system-x86_64 -device SUNW,,fdtwo,help Trap for the unwary. The fact that this was broken in device-introspect-test for more than six years until commit e27bd49876 fixed it demonstrates that "the unwary" includes seasoned developers. One QOM type name contains ' ': "ICH9 SMB". Because having to remember just one way to quote would be too easy. Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and ' ' by '-' in the other type names. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210304140229.575481-2-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-07esp: rename existing ESP QOM type to SYSBUS_ESPMark Cave-Ayland1-1/+1
The existing ESP QOM type currently represents a sysbus device with an embedded ESP state. Rename the type to SYSBUS_ESP accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210304221103.6369-3-mark.cave-ayland@ilande.co.uk>
2021-01-06sun4m: don't connect two qemu_irqs directly to the same inputMark Cave-Ayland1-5/+19
The sun4m board code connects both of the IRQ outputs of each ESCC to the same slavio input qemu_irq. Connecting two qemu_irqs outputs directly to the same input is not valid as it produces subtly wrong behaviour (for instance if both the IRQ lines are high, and then one goes low, the PIC input will see this as a high-to-low transition even though the second IRQ line should still be holding it high). This kind of wiring needs an explicitly created OR gate; add one. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201219111934.5540-1-mark.cave-ayland@ilande.co.uk> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini1-0/+1
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10sparc: remove bios_namePaolo Bonzini1-1/+1
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201026143028.3034018-15-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-28sparc32-ledma: don't reference nd_table directly within the deviceMark Cave-Ayland1-8/+13
Instead use qdev_set_nic_properties() to configure the on-board NIC at the sun4m machine level. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200926140216.7368-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-10-18sun4m: use qdev properties instead of legacy m48t59_init() functionMark Cave-Ayland1-2/+8
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20201016182739.22875-3-mark.cave-ayland@ilande.co.uk> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost1-6/+2
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09esp: Rename ESP_STATE to ESPEduardo Habkost1-1/+1
Make the type checking macro name consistent with the TYPE_* constant. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <20200902224311.1321159-40-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost1-5/+8
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost1-8/+13
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-08sparc/sun4m: Use start-powered-off CPUState propertyThiago Jung Bauermann1-19/+6
Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the start-powered-off property which makes cpu_common_reset() initialize it to 1 in common code. Now secondary_cpu_reset() becomes equivalent to main_cpu_reset() so rename the function to sun4m_cpu_reset(). Also remove setting of cs->halted from cpu_devinit(), which seems out of place when compared to similar code in other architectures (e.g., ppce500_init() in hw/ppc/e500.c). Finally, change creation of CPU object from cpu_create() to object_new() and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not possible to set a property after the object is realized. Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Message-Id: <20200826055535.951207-8-bauerman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-09-08sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()Thiago Jung Bauermann1-1/+0
We rely on cpu_common_reset() to set cs->halted to 0, it's redundant to do it in main_cpu_reset(). Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Message-Id: <20200826055535.951207-7-bauerman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-08-14nvram: Exit QEMU if NVRAM cannot contain all -prom-env dataGreg Kurz1-1/+1
Since commit 61f20b9dc5b7 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter"), pseries machines can pre-initialize the "system" partition in the NVRAM with the data passed to all -prom-env parameters on the QEMU command line. In this case it is assumed that all the data fits in 64 KiB, but the user can easily pass more and crash QEMU: $ qemu-system-ppc64 -M pseries $(for ((x=0;x<128;x++)); do \ echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \ done) # this requires ~128 Kib malloc(): corrupted top size Aborted (core dumped) This happens because we don't check if all the prom-env data fits in the NVRAM and chrp_nvram_set_var() happily memcpy() it passed the buffer. This crash affects basically all ppc/ppc64 machine types that use -prom-env: - pseries (all versions) - g3beige - mac99 and also sparc/sparc64 machine types: - LX - SPARCClassic - SPARCbook - SS-10 - SS-20 - SS-4 - SS-5 - SS-600MP - Voyager - sun4u - sun4v Add a max_len argument to chrp_nvram_create_system_partition() so that it can check the available size before writing to memory. Since NVRAM is populated at machine init, it seems reasonable to consider this error as fatal. So, instead of reporting an error when we detect that the NVRAM is too small and adapt all machine types to handle it, we simply exit QEMU in all cases. This is still better than crashing. If someone wants another behavior, I guess this can be reworked later. Tested with: $ yes q | \ (for arch in ppc ppc64 sparc sparc64; do \ echo == $arch ==; \ qemu=${arch}-softmmu/qemu-system-$arch; \ for mach in $($qemu -M help | awk '! /^Supported/ { print $1 }'); do \ echo $mach; \ $qemu -M $mach -monitor stdio -nodefaults -nographic \ $(for ((x=0;x<128;x++)); do \ echo -n " -prom-env " ; printf "%0.sx" {1..1024}; \ done) >/dev/null; \ done; echo; \ done) Without the patch, affected machine types cause QEMU to report some memory corruption and crash: malloc(): corrupted top size free(): invalid size *** stack smashing detected ***: terminated With the patch, QEMU prints the following message and exits: NVRAM is too small. Try to pass less data to -prom-env It seems that the conditions for the crash have always existed, but it affects pseries, the machine type I care for, since commit 61f20b9dc5b7 only. Fixes: 61f20b9dc5b7 ("spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter") RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1867739 Reported-by: John Snow <jsnow@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <159736033937.350502.12402444542194031035.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-1/+1
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster1-16/+16
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster1-32/+32
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-09hw/misc/empty_slot: Name the slots when createdPhilippe Mathieu-Daudé1-3/+7
Directly set the slot name when creating the device, to display the device name in trace events. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20200510152840.13558-8-f4bug@amsat.org>
2020-06-09hw/misc/empty_slot: Move the 'hw/misc' and cover in MAINTAINERSPhilippe Mathieu-Daudé1-1/+1
Add an entry for the 'empty_slot' device. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20200510152840.13558-7-f4bug@amsat.org>
2020-06-09hw/sparc/sun4m: Use UnimplementedDevice for I/O devicesPhilippe Mathieu-Daudé1-4/+7
These devices are not slots on a bus, but real I/O devices that we do not implement. As the ISDN ROM would be a ROMD device, also model it as UnimplementedDevice. Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20200510152840.13558-2-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster1-2/+2
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-15qom: Drop object_property_set_description() parameter @errpMarkus Armbruster1-2/+1
object_property_set_description() and object_class_property_set_description() fail only when property @name is not found. There are 85 calls of object_property_set_description() and object_class_property_set_description(). None of them can fail: * 84 immediately follow the creation of the property. * The one in spapr_rng_instance_init() refers to a property created in spapr_rng_class_init(), from spapr_rng_properties[]. Every one of them still gets to decide what to pass for @errp. 51 calls pass &error_abort, 32 calls pass NULL, one receives the error and propagates it to &error_abort, and one propagates it to &error_fatal. I'm actually surprised none of them violates the Error API. What are we gaining by letting callers handle the "property not found" error? Use when the property is not known to exist is simpler: you don't have to guard the call with a check. We haven't found such a use in 5+ years. Until we do, let's make life a bit simpler and drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-8-armbru@redhat.com> [One semantic rebase conflict resolved]
2020-02-28hw: Make MachineClass::is_default a boolean typePhilippe Mathieu-Daudé1-1/+1
There's no good reason for it to be type int, change it to bool. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200207161948.15972-3-philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-02-19sparc/sun4m: use memdev for RAMIgor Mammedov1-37/+37
memory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing MachineClass::default_ram_id and using MachineState::ram instead of manually initializing RAM memory region. Patch moves ram size check into sun4m_hw_init() and drops ram_init() moving remainder to sun4m_hw_init() as well, as it was the only place that called it. Also it rewrites impl. of RamDevice a little bit, which could serve as an example of frontend device for RAM backend. (Caveats are: 1. it doesn't check for memdev backend being mapped since it's been usurped by generic machine to handle majority of machines which don't have RAM frontend device 2. it still lacks 'addr' property and still has hardcoded sysbus_mmio_map() in board init. If done right, board should set 'addr' property and bus/machine plug handler should map it during device realize time. ) Further improvements were left as exercise for the future, since frontends are out scope of RAM conversion to memdev. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20200219160953.13771-71-imammedo@redhat.com>
2020-01-29hw/core/loader: Let load_elf() populate a field with CPU-specific flagsAleksandar Markovic1-2/+2
While loading the executable, some platforms (like AVR) need to detect CPU type that executable is built for - and, with this patch, this is enabled by reading the field 'e_flags' of the ELF header of the executable in question. The change expands functionality of the following functions: - load_elf() - load_elf_as() - load_elf_ram() - load_elf_ram_sym() The argument added to these functions is called 'pflags' and is of type 'uint32_t*' (that matches 'pointer to 'elf_word'', 'elf_word' being the type of the field 'e_flags', in both 32-bit and 64-bit variants of ELF header). Callers are allowed to pass NULL as that argument, and in such case no lookup to the field 'e_flags' will happen, and no information will be returned, of course. CC: Richard Henderson <rth@twiddle.net> CC: Peter Maydell <peter.maydell@linaro.org> CC: Edgar E. Iglesias <edgar.iglesias@gmail.com> CC: Michael Walle <michael@walle.cc> CC: Thomas Huth <huth@tuxfamily.org> CC: Laurent Vivier <laurent@vivier.eu> CC: Philippe Mathieu-Daudé <f4bug@amsat.org> CC: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> CC: Aurelien Jarno <aurelien@aurel32.net> CC: Jia Liu <proljc@gmail.com> CC: David Gibson <david@gibson.dropbear.id.au> CC: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: BALATON Zoltan <balaton@eik.bme.hu> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Thomas Huth <thuth@redhat.com> CC: Artyom Tarasenko <atar4qemu@gmail.com> CC: Fabien Chouteau <chouteau@adacore.com> CC: KONRAD Frederic <frederic.konrad@adacore.com> CC: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Message-Id: <1580079311-20447-24-git-send-email-aleksandar.markovic@rt-rk.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau1-2/+2
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-24hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé1-1/+1
The M48T59 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-0/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+2
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-05hw: Replace global smp variables with MachineState for all remaining archsLike Xu1-0/+2
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes are replaced with smp properties from MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2024-08-24 05:24:03 +0000