| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The CSS subsystem uses global variables, just face the truth and use
a variable also for whether the CSS vmstate is in use; remove the
indirection of fetching it from the machine type, which makes the
TCG code depend unnecessarily on the virtio-ccw machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240509170044.190795-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-51-richard.henderson@linaro.org>
|
|
"hw/s390x/css.h" is a header used by target-agnostic objects
(such hw/s390x/virtio-ccw-gpu.c), thus can not use target-specific
types, such CPUS390XState.
Have css_do_sic() take S390CPU a pointer, which is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-2-philmd@linaro.org>
|
|
Revert the control and flag bits in the subchannel status word in case
the SSCH operation fails with non-zero CC (ditto for CSCH and HSCH).
According to POPS, the control and flag bits are only changed if SSCH,
CSCH, and HSCH return CC 0, and no other action should be taken otherwise.
In order to simulate that after the fact, the bits need to be reverted on
non-zero CC.
While the do_subchannel_work logic for virtual (virtio) devices will
return condition code 0, passthrough (vfio) devices may encounter
errors from either the host kernel or real hardware that need to be
accounted for after this point. This includes restoring the state of
the Subchannel Status Word to reflect the subchannel, as these bits
would not be set in the event of a non-zero condition code from the
affected instructions.
Experimentation has shown that a failure on a START SUBCHANNEL (SSCH)
to a passthrough device would leave the subchannel with the START
PENDING activity control bit set, thus blocking subsequent SSCH
operations in css_do_ssch() until some form of error recovery was
undertaken since no interrupt would be expected.
Signed-off-by: Peter Jin <pjin@linux.ibm.com>
Message-Id: <20221027212341.2904795-1-pjin@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
[thuth: Updated the commit description to Eric's suggestion]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
hsch and csch basically have two parts: execute the command,
and perform the halt/clear function. For fully emulated
subchannels, it is pretty clear how it will work: check the
subchannel state, and actually 'perform the halt/clear function'
and set cc 0 if everything looks good.
For passthrough subchannels, some of the checking is done
within QEMU, but some has to be done within the kernel. QEMU's
subchannel state may be such that we can perform the async
function, but the kernel may still get a cc != 0 when it is
actually executing the instruction. In that case, we need to
set the condition actually encountered by the kernel; if we
set cc 0 on error, we would actually need to inject an interrupt
as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20210705163952.736020-2-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Currently, all subchannel types have "sense data" copied into
the IRB.ECW space, and a couple flags enabled in the IRB.SCSW
and IRB.ESW. But for passthrough (vfio-ccw) subchannels,
this data isn't populated in the first place, so enabling
those flags leads to unexpected behavior if the guest tries to
process the sense data (zeros) in the IRB.ECW.
Let's add a subchannel callback that builds these portions of
the IRB, and move the existing code into a routine for those
virtual subchannels. The passthrough subchannels will be able
to piggy-back onto this later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's move this logic into its own routine,
so it can be reused later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210617232537.1337506-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The Interrupt Response Block is comprised of several other
structures concatenated together, but only the 12-byte
Subchannel-Status Word (SCSW) is defined as a proper struct.
Everything else is a simple array of 32-bit words.
Let's define a proper struct for the 20-byte Extended-Status
Word (ESW) so that we can make good decisions about the sense
data that would go into the ECW area for virtual vs
passthrough devices.
[CH: adapted ESW definition to build with mingw, as discussed]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
ccw_dstream_read/write functions returned values are sometime
not taking into account and reported back to the upper level
of interpretation of CCW instructions.
It follows that accessing an invalid address does not trigger
a subchannel status program check to the guest as it should.
Let's test the return values of ccw_dstream_write[_buf] and
ccw_dstream_read[_buf] and report it to the caller.
Cc: qemu-stable@nongnu.org
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <1617899529-9329-2-git-send-email-pmorel@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The function will be moved to common QOM code, as it is not
specific to TYPE_DEVICE anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-31-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Every single qdev property setter function manually checks
dev->realized. We can just check dev->realized inside
qdev_property_set() instead.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-24-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Replace `Property *prop` parameter with `char *name`, to reduce
dependency of getter and setter functions on the Property struct
(which will be changed in following patches).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20201211220529.2290218-19-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Make the code more generic and not specific to TYPE_DEVICE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts
Message-Id: <20201211220529.2290218-13-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Make the code more generic and not specific to TYPE_DEVICE.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20201211220529.2290218-10-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Fix eventual copy/paste mistake introduced in commit bc994b74ea
("s390x/css: Use static initialization for channel_subsys fields").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200907024020.854465-1-philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
|
|
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
|
|
We have a use case (vfio-ccw) where a CRW is already built and
ready to use. Rather than teasing out the components just to
reassemble it later, let's rework this code so we can queue a
fully-qualified CRW directly.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The schib region can be used to obtain the latest SCHIB from the host
passthrough subchannel. Since the guest SCHIB is virtualized,
we currently only update the path related information so that the
guest is aware of any path related changes when it issues the
'stsch' instruction.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The address_space_rw() function allows either reads or writes
depending on the is_write argument passed to it; this is useful
when the direction of the access is determined programmatically
(as for instance when handling the KVM_EXIT_MMIO exit reason).
Under the hood it just calls either address_space_write() or
address_space_read_full().
We also use it a lot with a constant is_write argument, though,
which has two issues:
* when reading "address_space_rw(..., 1)" this is less
immediately clear to the reader as being a write than
"address_space_write(...)"
* calling address_space_rw() bypasses the optimization
in address_space_read() that fast-paths reads of a
fixed length
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.cocci.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org>
[PMD: Update macvm_set_cr0() reported by Laurent Vivier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Two lines in hw/net/dp8393x.c that Coccinelle produced that
were over 80 characters were re-wrapped by hand.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
|
|
A vfio-ccw device may provide an async command subregion for
issuing halt/clear subchannel requests. If it is present, use
it for sending halt/clear request to the device; if not, fall
back to emulation (as done today).
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20190613092542.2834-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
If a ccw has CCW_FLAG_SKIP set, and the command is of type
read, read backwards, or sense, no data should be written
to the guest for that command.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516133327.11430-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The GCC 9 compiler complains about many places in s390 code
that take the address of members of the 'struct SCHIB' which
is marked packed:
hw/s390x/css.c: In function ‘sch_handle_clear_func’:
hw/s390x/css.c:698:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\
ue [-Waddress-of-packed-member]
698 | PMCW *p = &sch->curr_status.pmcw;
| ^~~~~~~~~~~~~~~~~~~~~~
hw/s390x/css.c:699:15: warning: taking address of packed member of ‘struct SCHIB’ may result in an unaligned pointer val\
ue [-Waddress-of-packed-member]
699 | SCSW *s = &sch->curr_status.scsw;
| ^~~~~~~~~~~~~~~~~~~~~~
...snip many more...
Almost all of these are just done for convenience to avoid
typing out long variable/field names when referencing struct
members. We can get most of this convenience by taking the
address of the 'struct SCHIB' instead, avoiding triggering
the compiler warnings.
In a couple of places we copy via a local variable which is
a technique already applied elsewhere in s390 code for this
problem.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190329111104.17223-13-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Taking the address of a field in a packed struct is a bad idea, because
it might not be actually aligned enough for that pointer type (and
thus cause a crash on dereference on some host architectures). Newer
versions of clang warn about this.
Avoid the problem by using local copies of the PMCW and SCSW
struct fields in copy_schib_from_guest() and copy_schib_to_guest().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181213120252.21697-1-peter.maydell@linaro.org>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The uint16_t member cu_type of struct SenseId is not naturally aligned,
and since the struct is marked with QEMU_PACKED, this can lead to
unaligned memory accesses - which does not work on architectures like
Sparc. Thus remove the QEMU_PACKED here and rather copy the struct
byte by byte when we do copy_sense_id_to_guest().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-3-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The vfio-ccw module does the check too, and there is actually no
technical obstacle for supporting fmt 1 idaws. Let us be ready for the
beautiful day when fmt 1 idaws become supported by the vfio-ccw kernel
module. QEMU does not have to do a thing for that, except not insisting
on this check.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180524175828.3143-3-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
There is at least one guest (OS) such that although it does not rely on
the guarantees provided by ORB 1 word 9 bit (aka unlimited prefetch, aka
P bit) not being set, it fails to tell this to the machine.
Usually this ain't a big deal, as the original purpose of the P bit is to
allow for performance optimizations. vfio-ccw however can not provide the
guarantees required if the bit is not set.
It is not possible to implement support for the P bit not set without
transitioning to lower level protocols for vfio-ccw. So let's give the
user the opportunity to force setting the P bit, if the user knows this
is safe. For self modifying channel programs forcing the P bit is not
safe. If the P bit is forced for a self modifying channel program things
are expected to break in strange ways.
Let's also avoid warning multiple about P bit not set in the ORB in case
P bit is not told to be forced, and designate the affected vfio-ccw
device.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Suggested-by: Dong Jia Shi <bjsdjshi@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Tested-by: Jason J. Herne <jjherne@linux.ibm.com>
Message-Id: <20180524175828.3143-2-pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The 3270 code will try to post an attention interrupt when the
3270 emulator (e.g. x3270) attaches. If the guest has not yet
enabled the subchannel for the 3270 device, we will present a spurious
cc 1 (status pending) when it uses msch on it later on, e.g. when
trying to enable the subchannel.
To fix this, just don't do anything in css_conditional_io_interrupt()
if the subchannel is not enabled. The 3270 code will work fine with
that, and the other user of this function (virtio-ccw) never
attempts to post an interrupt for a disabled device to begin with.
CC: qemu-stable@nongnu.org
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This avoids tons of conversions when handling interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180129125623.21729-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
exec: housekeeping (funny since 02d0e095031)
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The default css 0xfe is currently restricted to virtual subchannel
devices. The hope when the decision was made was, that non-virtual
subchannel devices will come around when guest can exploit multiple
channel subsystems. Since the guests generally don't do, the pain
of the partitioned (cssid) namespace outweighs the gain.
Let us remove the corresponding restrictions (virtual devices
can be put only in 0xfe and non-virtual devices in any css except
the 0xfe -- while s390-squash-mcss then remaps everything to cssid 0).
At the same time, change our schema for generating css bus ids to put
both virtual and non-virtual devices into the default css (spilling over
into other css images, if needed). The intention is to deprecate
s390-squash-mcss. With this change devices without a specified devno
won't end up hidden to guests not supporting multiple channel subsystems,
unless this can not be avoided (default css full).
Let us also advertise the changes to the management software (so it can
tell are cssids unrestricted or restricted).
The adverse effect of getting rid of the restriction on migration should
not be too severe. Vfio-ccw devices are not live-migratable yet, and for
virtual devices using the extra freedom would only make sense with the
aforementioned guest support in place.
The auto-generated bus ids are affected by both changes. We hope to not
encounter any auto-generated bus ids in production as Libvirt is always
explicit about the bus id. Since 8ed179c937 ("s390x/css: catch section
mismatch on load", 2017-05-18) the worst that can happen because the same
device ended up having a different bus id is a cleanly failed migration.
I find it hard to reason about the impact of changed auto-generated bus
ids on migration for command line users as I don't know which rules is
such an user supposed to follow.
Another pain-point is down- or upgrade of QEMU for command line users.
The old way and the new way of doing vfio-ccw are mutually incompatible.
Libvirt is only going to support the new way, so for libvirt users, the
possible problems at QEMU downgrade are the following. If a domain
contains virtual devices placed into a css different than 0xfe the domain
will refuse to start with a QEMU not having this patch. Putting devices
into a css different that 0xfe however won't make much sense in the near
future (guest support). Libvirt will refuse to do vfio-ccw with a QEMU
not having this patch. This is business as usual.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20171206144438.28908-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
It is broken and not even wired up. We'll add a new handler soon, but
that will live somewhere else.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171130162744.25442-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Simplify the error handling of the MSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-8-pasic@linux.vnet.ibm.com>
[CH: fix return code for fctl != 0]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Simplify the error handling of the HSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-7-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Simplify the error handling of the CSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Simplify the error handling of the XSCH. Let the code detecting the
condition tell (in a less ambiguous way) how it's to be handled. No
changes in behavior.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Simplify the error handling of the SSCH and RSCH handler avoiding
arbitrary and cryptic error codes being used to tell how the instruction
is supposed to end. Let the code detecting the condition tell how it's
to be handled in a less ambiguous way. It's best to handle SSCH and RSCH
in one go as the emulation of the two shares a lot of code.
For passthrough this change isn't pure refactoring, but changes the way
kernel reported EFAULT is handled. After clarifying the kernel interface
we decided that EFAULT shall be mapped to unit exception. Same goes for
unexpected error codes and absence of required ORB flags.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171017140453.51099-4-pasic@linux.vnet.ibm.com>
Tested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
[CH: cosmetic changes]
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Calling do_subchannel_work with no function control flags set in SCSW is
a programming error. Currently we handle this differently in
do_subchannel_work_virtual and do_subchannel_work_passthrough. Let's be
consistent and guard with a common assert against this programming error.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20171004154144.88995-2-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: more changes in hw/s390x/css.c, added target/s390x/cpu_models.c]
Message-Id: <20171006235023.11952-27-f4bug@amsat.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Let's add indirect data addressing support for our virtual channel
subsystem. This implementation does not bother with any kind of
prefetching. We simply step through the IDAL on demand.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-6-pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The architecture mandates the addresses to be accessed on the first
indirection level (that is, the data addresses without IDA, and the
(M)IDAW addresses with (M)IDA) to be checked against an CCW format
dependent limit maximum address. If a violation is detected, the storage
access is not to be performed and a channel program check needs to be
generated. As of today, we fail to do this check.
Let us stick even closer to the architecture specification.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-5-pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Replace direct access which implicitly assumes no IDA
or MIDA with the new ccw data stream interface which should
cope with these transparently in the future.
Note that checking the return code for ccw_dstream_* will be
done in a follow-on patch.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
This is a preparation for introducing handling for indirect data
addressing and modified indirect data addressing (CCW). Here we introduce
an interface which should make the addressing scheme transparent for the
client code. Here we implement only the basic scheme (no IDA or MIDA).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Message-Id: <20170921180841.24490-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.
Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.
Note: If you add an error exit in your pre_save you must emit
an error_report to say why.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The case in question actually never happens. Let us get rid of the dead
code.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170908152446.14606-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
