aboutsummaryrefslogtreecommitdiff
path: root/hw/rx
AgeCommit message (Collapse)AuthorFilesLines
2024-05-10kconfig: express dependency of individual boards on libfdtPaolo Bonzini1-1/+2
Now that boards are enabled by default and the "CONFIG_FOO=y" entries are gone from configs/devices/, there cannot be any more a conflicts between the default contents of configs/devices/ and a failed "depends on" clause. With this change, each individual board or target can express whether it needs FDT. It can then include the common code in the build via "select DEVICE_TREE", which will also as tell meson to link with libfdt. This allows building non-microvm x86 emulators without having libfdt available. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03rx: switch boards to "default y"Paolo Bonzini1-0/+2
Some targets use "default y" for boards to filter out those that require TCG. For consistency we are switching all other targets to do the same. Continue with RX. No changes to generated config-devices.mak file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-02-15hw/rx/rx62n: Only call qdev_get_gpio_in() when necessaryPhilippe Mathieu-Daudé1-8/+8
Instead of filling an array of all the possible IRQs, only call qdev_get_gpio_in() when an IRQ is used. Remove the array from RX62NState. Doing so we avoid calling qdev_get_gpio_in() on an unrealized device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213130341.1793-4-philmd@linaro.org>
2024-02-15hw/rx/rx62n: Reduce inclusion of 'qemu/units.h'Philippe Mathieu-Daudé2-0/+2
"qemu/units.h" is not used in the "hw/rx/rx62n.h" header, include it in the source where it is. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213130341.1793-3-philmd@linaro.org>
2023-11-10hw/rx/rx62n: Use qdev_prop_set_array()Kevin Wolf1-9/+10
Instead of manually setting "foo-len" and "foo[i]" properties, build a QList and use the new qdev_prop_set_array() helper to set the whole array property with a single call. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231109174240.72376-9-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2023-09-21hw/other: spelling fixesMichael Tokarev1-1/+1
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-05bulk: Remove pointless QOM castsPhilippe Mathieu-Daudé1-1/+1
Mechanical change running Coccinelle spatch with content generated from the qom-cast-macro-clean-cocci-gen.py added in the previous commit. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230601093452.38972-3-philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-10-27rx: re-randomize rng-seed on rebootJason A. Donenfeld1-0/+3
When the system reboots, the rng-seed that the FDT has should be re-randomized, so that the new boot gets a new seed. Since the FDT is in the ROM region at this point, we add a hook right after the ROM has been added, so that we have a pointer to that copy of the FDT. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-id: 20221025004327.568476-12-Jason@zx2c4.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-07-22hw/rx: pass random seed to fdtJason A. Donenfeld1-0/+4
If the FDT contains /chosen/rng-seed, then the Linux RNG will use it to initialize early. Set this using the usual guest random number generation function. This FDT node is part of the DT specification. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Message-Id: <20220719122033.135902-1-Jason@zx2c4.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-21hw/rx: rx-gdbsim DTB load address aligned of 16byte.Yoshinori Sato1-1/+1
Linux kernel required alined address of DTB. But missing align in dtb load function. Fixed to load to the correct address. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220207132758.84403-1-ysato@users.sourceforge.jp> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-03hw/rx/rx-gdbsim: Do not accept invalid memory sizePhilippe Mathieu-Daudé1-0/+1
We check the amount of RAM is enough, warn when it is not, but if so we neglect to bail out. Fix that by adding the missing exit() call. Fixes: bda19d7bb56 ("hw/rx: Add RX GDB simulator") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp> Message-Id: <20210407223056.1870497-1-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth2-2/+0
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth1-1/+0
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Do not include hw/sysbus.h if it is not necessaryThomas Huth1-1/+0
Many files include hw/sysbus.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210327082804.2259480-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02hw: Remove superfluous includes of hw/hw.hThomas Huth2-2/+0
The include/hw/hw.h header only has a prototype for hw_error(), so it does not make sense to include this in files that do not use this function. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210326151848.2217216-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09qtest: delete superfluous inclusions of qtest.hChen Qun1-1/+0
There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-12-10rx: move BIOS load from MCU to boardPaolo Bonzini2-9/+10
The ROM loader state is global and not part of the MCU, and the BIOS is in machine->firmware. So just like the kernel case, load it in the board. Due to the ordering between CPU reset and ROM reset, the ROM has to be registered before the CPU is realized, otherwise the reset vector is loaded before the ROM is there. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-11-09hw/rx/rx-gdbsim: Fix memory leak (CID 1432307)Philippe Mathieu-Daudé1-2/+1
As load_device_tree() returns allocated memory, we need to free it. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Fixes: bda19d7bb56 ("hw/rx: Add RX GDB simulator") Reported-by: Coverity (CID 1432307: RESOURCE_LEAK) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201102104542.2064745-1-f4bug@amsat.org>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost2-10/+4
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost2-6/+11
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02rx: Rename QOM type check macrosEduardo Habkost1-2/+2
Currently we have a RXCPU typedef and a RXCPU type checking macro, but OBJECT_DECLARE* would transform the RXCPU macro into a function, and the function name would conflict with the typedef name. Rename the RXCPU* QOM type check macros to RX_CPU*, so we will avoid the conflict and make the macro names consistent with the TYPE_RX_CPU constant name. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-53-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/arch*Marc-André Lureau2-2/+5
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-6/+6
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-06-22hw/rx: Add RX GDB simulatorYoshinori Sato3-0/+203
Add the RX machine internally simulated in GDB. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI, renamed CPU -> MCU, device -> microcontroller] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp> [PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-22hw/rx: Register R5F562N7 and R5F562N8 MCUsPhilippe Mathieu-Daudé1-15/+77
Make the current TYPE_RX62N_MCU an abstract class, and generate TYPE_R5F562N7_MCU and TYPE_R5F562N8_MCU models. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-22hw/rx: Honor -accel qtestRichard Henderson1-1/+8
Issue an error if no kernel, no bios, and not qtest'ing. Fixes make check-qtest-rx: test/qom-test. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20190531134315.4109-16-richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-06-22hw/rx: RX62N microcontroller (MCU)Yoshinori Sato3-0/+261
rx62n - RX62N cpu. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI, renamed CPU -> MCU, device -> microcontroller] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp> [PMD: Rebased on b77b5b3dc7, split of machine, use &error_abort] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.1 at 2024-07-19 22:21:27 +0000