aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)AuthorFilesLines
2022-07-03hw/riscv: boot: Reduce FDT address alignment constraintsAlistair Francis1-2/+2
We previously stored the device tree at a 16MB alignment from the end of memory (or 3GB). This means we need at least 16MB of memory to be able to do this. We don't actually need the FDT to be 16MB aligned, so let's drop it down to 2MB so that we can support systems with less memory, while also allowing FDT size expansion. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/992 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-Id: <20220608062015.317894-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-06-10hw/core/loader: return image sizes as ssize_tJamie Iles1-2/+3
Various loader functions return an int which limits images to 2GB which is fine for things like a BIOS/kernel image, but if we want to be able to load memory images or large ramdisks then any file over 2GB would silently fail to load. Cc: Luc Michel <lmichel@kalray.eu> Signed-off-by: Jamie Iles <jamie@nuviainc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211111141141.3295094-2-jamie@nuviainc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-06-10hw/riscv: virt: Generate fw_cfg DT node correctlyAtish Patra1-10/+18
fw_cfg DT node is generated after the create_fdt without any check if the DT is being loaded from the commandline. This results in FDT_ERR_EXISTS error if dtb is loaded from the commandline. Generate fw_cfg node only if the DT is not loaded from the commandline. Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220526203500.847165-1-atishp@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-24hw/riscv: virt: Fix interrupt parent for dynamic platform devicesAnup Patel1-13/+12
When both APLIC and IMSIC are present in virt machine, the APLIC should be used as parent interrupt controller for dynamic platform devices. In case of multiple sockets, we should prefer interrupt controller of socket0 for dynamic platform devices. Fixes: 3029fab64309 ("hw/riscv: virt: Add support for generating platform FDT entries") Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220511144528.393530-9-apatel@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-24hw/riscv/sifive_u: Resolve redundant property accessorsBernhard Beschow1-20/+4
The QOM API already provides accessors for uint32 values, so reuse them. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220301225220.239065-3-shentey@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-24hw/riscv: Make CPU config error handling generous (sifive_e/u/opentitan)Tsukasa OI3-4/+4
If specified CPU configuration is not valid, not just it prints error message, it aborts and generates core dumps (depends on the operating system). This kind of error handling should be used only when a serious runtime error occurs. This commit makes error handling on CPU configuration more generous on sifive_e/u and opentitan machines. It now just prints error message and quits (without coredumps and aborts). This is separate from spike/virt because it involves different type (TYPE_RISCV_HART_ARRAY) on sifive_e/u and opentitan machines. Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <09e61e58a7543da44bdb0e0f5368afc8903b4aa6.1652509778.git.research_trasio@irq.a4lg.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-24hw/riscv: Make CPU config error handling generous (virt/spike)Tsukasa OI2-2/+2
If specified CPU configuration is not valid, not just it prints error message, it aborts and generates core dumps (depends on the operating system). This kind of error handling should be used only when a serious runtime error occurs. This commit makes error handling on CPU configuration more generous on virt/spike machines. It now just prints error message and quits (without coredumps and aborts). Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <d17381d3ea4992808cf1894f379ca67220f61b45.1652509778.git.research_trasio@irq.a4lg.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: Enable TPM backendsAlistair Francis2-0/+5
Imply the TPM sysbus devices. This allows users to add TPM devices to the RISC-V virt board. This was tested by first creating an emulated TPM device: swtpm socket --tpm2 -t -d --tpmstate dir=/tmp/tpm \ --ctrl type=unixio,path=swtpm-sock Then launching QEMU with: -chardev socket,id=chrtpm,path=swtpm-sock \ -tpmdev emulator,id=tpm0,chardev=chrtpm \ -device tpm-tis-device,tpmdev=tpm0 The TPM device can be seen in the memory tree and the generated device tree. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/942 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-7-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: virt: Add device plug supportAlistair Francis1-0/+35
Add support for plugging in devices, this was tested with the TPM device. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-6-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: virt: Add support for generating platform FDT entriesAlistair Francis1-0/+19
Similar to the ARM virt machine add support for adding device tree entries for dynamically created devices. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Message-Id: <20220427234146.1130752-5-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: virt: Create a platform busAlistair Francis2-19/+50
Create a platform bus to allow dynamic devices to be connected. This is based on the ARM implementation. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: virt: Add a machine done notifierAlistair Francis1-90/+101
Move the binary and device tree loading code to the machine done notifier. This allows us to prepare for editing the device tree as part of the notifier. This is based on similar code in the ARM virt machine. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: Don't add empty bootargs to device treeBin Meng4-4/+4
Commit 7c28f4da20e5 ("RISC-V: Don't add NULL bootargs to device-tree") tried to avoid adding *NULL* bootargs to device tree, but unfortunately the changes were entirely useless, due to MachineState::kernel_cmdline can't be NULL at all as the default value is given as an empty string. (see hw/core/machine.c::machine_initfn()). Note the wording of *NULL* bootargs is wrong. It can't be NULL otherwise a segfault had already been observed by dereferencing the NULL pointer. It should be worded as *empty" bootargs. Fixes: 7c28f4da20e5 ("RISC-V: Don't add NULL bootargs to device-tree") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421055629.1177285-2-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: spike: Add '/chosen/stdout-path' in device tree unconditionallyBin Meng1-2/+3
At present the adding '/chosen/stdout-path' property in device tree is determined by whether a kernel command line is provided, which is wrong. It should be added unconditionally. Fixes: 8d8897accb1c ("hw/riscv: spike: Allow using binary firmware as bios") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421055629.1177285-1-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22hw/riscv: boot: Support 64bit fdt address.Dylan Jhong1-5/+7
The current riscv_load_fdt() forces fdt_load_addr to be placed at a dram address within 3GB, but not all platforms have dram_base within 3GB. This patch adds an exception for dram base not within 3GB, which will place fdt at dram_end align 16MB. riscv_setup_rom_reset_vec() also needs to be modified Signed-off-by: Dylan Jhong <dylan@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220419115945.37945-1-dylan@andestech.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22hw/riscv: virt: fix DT property mmu-type when CPU mmu option is disabledNiklas Cassel1-2/+8
The device tree property "mmu-type" is currently exported as either "riscv,sv32" or "riscv,sv48". However, the riscv cpu device tree binding [1] has a specific value "riscv,none" for a HART without a MMU. Set the device tree property "mmu-type" to "riscv,none" when the CPU mmu option is disabled using rv32,mmu=off or rv64,mmu=off. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/cpus.yaml?h=v5.17 Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220414155510.1364147-1-niklas.cassel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22hw/riscv: virt: Exit if the user provided -bios in combination with KVMRalf Ramsauer1-4/+10
The -bios option is silently ignored if used in combination with -enable-kvm. The reason is that the machine starts in S-Mode, and the bios typically runs in M-Mode. Better exit in that case to not confuse the user. Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-Id: <20220401121842.2791796-1-ralf.ramsauer@oth-regensburg.de> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-22riscv: opentitan: Connect opentitan SPI HostWilfred Mallawa1-4/+32
Connect spi host[1/0] to opentitan. Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220303045426.511588-2-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-06Remove qemu-common.h include from most unitsMarc-André Lureau1-1/+0
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20220323155743.1585078-33-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-03-03hw: riscv: opentitan: fixup SPI addressesWilfred Mallawa1-3/+9
This patch updates the SPI_DEVICE, SPI_HOST0, SPI_HOST1 base addresses. Also adds these as unimplemented devices. The address references can be found [1]. [1] https://github.com/lowRISC/opentitan/blob/6c317992fbd646818b34f2a2dbf44bc850e461e4/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h#L107 Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220218063839.405082-1-alistair.francis@opensource.wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Increase maximum number of allowed CPUsAnup Patel1-0/+10
To facilitate software development of RISC-V systems with large number of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9). We also add a detailed source level comments about limit defines which impact the physical address space utilization. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-Id: <20220220085526.808674-6-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA IMSIC support to virt machineAnup Patel2-81/+359
We extend virt machine to emulate both AIA IMSIC and AIA APLIC devices only when "aia=aplic-imsic" parameter is passed along with machine name in the QEMU command-line. The AIA IMSIC is only a per-HART MSI controller so we use AIA APLIC in MSI-mode to forward all wired interrupts as MSIs to the AIA IMSIC. We also provide "aia-guests=<xyz>" parameter which can be used to specify number of VS-level AIA IMSIC Guests MMIO pages for each HART. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-4-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-03-03hw/riscv: virt: Add optional AIA APLIC support to virt machineAnup Patel2-53/+239
We extend virt machine to emulate AIA APLIC devices only when "aia=aplic" parameter is passed along with machine name in QEMU command-line. When "aia=none" or not specified then we fallback to original PLIC device emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220220085526.808674-2-anup@brainfault.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-02-16hw/riscv: virt: Use AIA INTC compatible string when availableAnup Patel1-2/+11
We should use the AIA INTC compatible string in the CPU INTC DT nodes when the CPUs support AIA feature. This will allow Linux INTC driver to use AIA local interrupt CSRs. Signed-off-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Anup Patel <anup@brainfault.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Message-id: 20220204174700.534953-17-anup@brainfault.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: Remove macros for ELF BIOS image namesAnup Patel1-2/+2
Now that RISC-V Spike machine can use BIN BIOS images, we remove the macros used for ELF BIOS image names. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: spike: Allow using binary firmware as biosAnup Patel1-16/+25
Currently, we have to use OpenSBI firmware ELF as bios for the spike machine because the HTIF console requires ELF for parsing "fromhost" and "tohost" symbols. The latest OpenSBI can now optionally pick-up HTIF register address from HTIF DT node so using this feature spike machine can now use OpenSBI firmware BIN as bios. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21target/riscv: Support start kernel directly by KVMYifei Jiang2-26/+73
Get kernel and fdt start address in virt.c, and pass them to KVM when cpu reset. Add kvm_riscv.h to place riscv specific interface. In addition, PLIC is created without M-mode PLIC contexts when KVM is enabled. Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Signed-off-by: Mingwang Li <limingwang@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Message-id: 20220112081329.1835-7-jiangyifei@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21riscv: opentitan: fixup plic stride lenWilfred Mallawa1-1/+1
The following change was made to rectify incorrectly set stride length on the PLIC [1]. Where it should be 32bit and not 24bit (0x18). This was discovered whilst attempting to fix a bug where a timer_interrupt was not serviced on TockOS-OpenTitan. [1] https://docs.opentitan.org/hw/top_earlgrey/ip_autogen/rv_plic/doc/ Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20220111071025.4169189-1-alistair.francis@opensource.wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-08hw/riscv: Use error_fatal for SoC realisationAlistair Francis4-4/+4
When realising the SoC use error_fatal instead of error_abort as the process can fail and report useful information to the user. Currently a user can see this: $ ../qemu/bld/qemu-system-riscv64 -M sifive_u -S -monitor stdio -display none -drive if=pflash QEMU 6.1.93 monitor - type 'help' for more information (qemu) Unexpected error in sifive_u_otp_realize() at ../hw/misc/sifive_u_otp.c:229: qemu-system-riscv64: OTP drive size < 16K Aborted (core dumped) Which this patch addresses Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-Id: <20220105213937.1113508-8-alistair.francis@opensource.wdc.com>
2021-12-20hw/riscv: Use load address rather than entry point for fw_dynamic next_addrJessica Clarke1-3/+10
The original BBL boot method had the kernel embedded as an opaque blob that was blindly jumped to, which OpenSBI implemented as fw_payload. OpenSBI then implemented fw_jump, which allows the payload to be loaded elsewhere, but still blindly jumps to a fixed address at which the kernel is to be loaded. Finally, OpenSBI introduced fw_dynamic, which allows the previous stage to inform it where to jump to, rather than having to blindly guess like fw_jump, or embed the payload as part of the build like fw_payload. When used with an opaque binary (i.e. the output of objcopy -O binary), it matches the behaviour of the previous methods. However, when used with an ELF, QEMU currently passes on the ELF's entry point address, which causes a discrepancy compared with all the other boot methods if that entry point is not the first instruction in the binary. This difference specific to fw_dynamic with an ELF is not apparent when booting Linux, since its entry point is the first instruction in the binary. However, FreeBSD has a separate ELF entry point, following the calling convention used by its bootloader, that differs from the first instruction in the binary, used for the legacy SBI entry point, and so the specific combination of QEMU's default fw_dynamic firmware with booting FreeBSD as an ELF rather than a raw binary does not work. Thus, align the behaviour when loading an ELF with the behaviour when loading a raw binary; namely, use the base address of the loaded kernel in place of the entry point. The uImage code is left as-is in using the U-Boot header's entry point, since the calling convention for that entry point is the same as the SBI one and it mirrors what U-Boot will do. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20211214032456.70203-1-jrtc27@jrtc27.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-12-15hw: Replace trivial drive_get_next() by drive_get()Markus Armbruster2-2/+2
drive_get_next() is basically a bad idea. It returns the "next" block backend of a certain interface type. "Next" means bus=0,unit=N, where subsequent calls count N up from zero, per interface type. This lets you define unit numbers implicitly by execution order. If the order changes, or new calls appear "in the middle", unit numbers change. ABI break. Hard to spot in review. A number of machines connect just one backend with drive_get_next(). Change them to use drive_get() directly. This makes the (zero) unit number explicit in the code. Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com> Cc: Niek Linnenbank <nieklinnenbank@gmail.com> Cc: Andrew Baumann <Andrew.Baumann@microsoft.com> Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Artyom Tarasenko <atar4qemu@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Laurent Vivier <laurent@vivier.eu> Cc: qemu-arm@nongnu.org Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
2021-12-15hw/sd/ssi-sd: Do not create SD card within controller's realizeMarkus Armbruster1-1/+12
ssi_sd_realize() creates an "sd-card" device. This is inappropriate, and marked FIXME. Move it to the boards that create these devices. Prior art: commit eb4f566bbb for device "generic-sdhci", and commit 26c607b86b for device "pl181". The device remains not user-creatable, because its users should (and do) wire up its GPIO chip-select line. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org> Cc: qemu-arm@nongnu.org Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20211117163409.3587705-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-28hw/riscv: opentitan: Fixup the PLIC context addressesAlistair Francis1-2/+2
Fixup the PLIC context address to correctly support the threshold and claim register. Fixes: ef63100648 ("hw/riscv: opentitan: Update to the latest build") Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211025040657.262696-1-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Use the PLIC config helper functionAlistair Francis1-19/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-5-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: microchip_pfsoc: Use the PLIC config helper functionAlistair Francis1-13/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-4-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: sifive_u: Use the PLIC config helper functionAlistair Francis1-13/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-3-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: boot: Add a PLIC config string functionAlistair Francis1-0/+25
Add a generic function that can create the PLIC strings. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20211022060133.3045020-2-alistair.francis@opensource.wdc.com
2021-10-28hw/riscv: virt: Don't use a macro for the PLIC configurationAlistair Francis1-1/+1
Using a macro for the PLIC configuration doesn't make the code any easier to read. Instead it makes it harder to figure out what is going on, so let's remove it. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20211022060133.3045020-1-alistair.francis@opensource.wdc.com
2021-10-22hw/riscv: spike: Use MachineState::ram and MachineClass::default_ram_idBin Meng1-4/+2
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: sifive_u: Use MachineState::ram and MachineClass::default_ram_idBin Meng1-4/+2
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-6-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: sifive_e: Use MachineState::ram and MachineClass::default_ram_idBin Meng1-4/+12
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. While at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-5-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: shakti_c: Use MachineState::ram and MachineClass::default_ram_idBin Meng1-4/+2
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-4-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: opentitan: Use MachineState::ram and MachineClass::default_ram_idBin Meng1-4/+12
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. While at it add check for user supplied RAM size and error out if it mismatches board expected value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: microchip_pfsoc: Use MachineState::ram and ↵Bin Meng1-16/+20
MachineClass::default_ram_id Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20211020014112.7336-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: opentitan: Update to the latest buildAlistair Francis1-5/+17
Update the OpenTitan machine model to match the latest OpenTitan FPGA design. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 18b1b681b0f8dd2461e819d1217bf0b530812680.1634524691.git.alistair.francis@wdc.com
2021-10-22target/riscv: Replace riscv_cpu_is_32bit with riscv_cpu_mxlRichard Henderson1-1/+1
Shortly, the set of supported XL will not be just 32 and 64, and representing that properly using the enumeration will be imperative. Two places, booting and gdb, intentionally use misa_mxl_max to emphasize the use of the reset value of misa.mxl, and not the current cpu state. Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20211020031709.359469-5-richard.henderson@linaro.org Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: virt: Use machine->ram as the system memoryMingwang Li1-4/+2
If default main_mem is used to be registered as the system memory, other memory cannot be initialized. Therefore, the system memory should be initialized to the machine->ram, which consists of the default main_mem and other possible memory required by applications, such as shared hugepage memory in DPDK. Also, the mc->defaul_ram_id should be set to the default main_mem, such as "riscv_virt_board.ram" for the virt machine. Signed-off-by: Mingwang Li <limingwang@huawei.com> Signed-off-by: Yifei Jiang <jiangyifei@huawei.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211016030908.40480-1-limingwang@huawei.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-07hw/riscv: shakti_c: Mark as not user creatableAlistair Francis1-0/+7
Mark the shakti_c machine as not user creatable. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/639 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <c617a04d4e3dd041a3427b47a1b1d5ab475a2edd.1632871759.git.alistair.francis@wdc.com>
2021-09-21hw/riscv: opentitan: Correct the USB Dev addressAlistair Francis1-1/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: d6cb4dfe75a2f536f217d7075b750ece3acb1535.1631767043.git.alistair.francis@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel1-1/+112
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.1 at 2024-12-29 02:33:43 +0000