aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc
AgeCommit message (Collapse)AuthorFilesLines
2020-06-15sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 2Markus Armbruster1-4/+2
This is the same transformation as in the previous commit, except sysbus_init_child_obj() and realize are too separated for the commit's Coccinelle script to handle, typically because sysbus_init_child_obj() is in a device's instance_init() method, and the matching realize is in its realize() method. Perhaps a Coccinelle wizard could make it transform that pattern, but I'm just a bungler, and the best I can do is transforming the two separate parts separately: @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(OBJECT(child), true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression errp; expression child; symbol true; @@ - object_property_set_bool(child, true, "realized", errp); + sysbus_realize(SYS_BUS_DEVICE(child), errp); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; @@ - qdev_init_nofail(DEVICE(child)); + sysbus_realize(SYS_BUS_DEVICE(child), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; expression dev; @@ dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression child; identifier dev; @@ DeviceState *dev = DEVICE(child); ... - qdev_init_nofail(dev); + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); // only correct with a matching sysbus_init_child_obj() transformation! @@ expression parent, name, size, type; expression child; symbol true; @@ - sysbus_init_child_obj(parent, name, child, size, type); + sysbus_init_child_XXX(parent, name, child, size, type); @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, child, sizeof(*child), type) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; @@ - sysbus_init_child_XXX(parent, propname, &child, sizeof(child), type) + object_initialize_child(parent, propname, &child, type) This script is *unsound*: we need to manually verify init and realize conversions are properly paired. This commit has only the pairs where object_initialize_child()'s @child and sysbus_realize()'s @dev argument text match exactly within the same source file. Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-49-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster11-33/+33
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qom: Less verbose object_initialize_child()Markus Armbruster3-34/+20
All users of object_initialize_child() pass the obvious child size argument. Almost all pass &error_abort and no properties. Tiresome. Rename object_initialize_child() to object_initialize_child_with_props() to free the name. New convenience wrapper object_initialize_child() automates the size argument, and passes &error_abort and no properties. Rename object_initialize_childv() to object_initialize_child_with_propsv() for consistency. Convert callers with this Coccinelle script: @@ expression parent, propname, type; expression child, size; symbol error_abort; @@ - object_initialize_child(parent, propname, OBJECT(child), size, type, &error_abort, NULL) + object_initialize_child(parent, propname, child, size, type, &error_abort, NULL) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, child, sizeof(*child), type, &error_abort, NULL) + object_initialize_child(parent, propname, child, type) @@ expression parent, propname, type; expression child; symbol error_abort; @@ - object_initialize_child(parent, propname, &child, sizeof(child), type, &error_abort, NULL) + object_initialize_child(parent, propname, &child, type) @@ expression parent, propname, type; expression child, size, err; expression list props; @@ - object_initialize_child(parent, propname, child, size, type, err, props) + object_initialize_child_with_props(parent, propname, child, size, type, err, props) Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> [Rebased: machine opentitan is new (commit fe0fe4735e7)] Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-37-armbru@redhat.com>
2020-06-15isa: Convert uses of isa_create(), isa_try_create() manuallyMarkus Armbruster1-5/+4
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is not worthwhile. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-21-armbru@redhat.com>
2020-06-15isa: Convert uses of isa_create() with CoccinelleMarkus Armbruster1-10/+16
Replace dev = isa_create(bus, type_name); ... qdev_init_nofail(dev); by dev = isa_new(type_name); ... isa_realize_and_unref(dev, bus, &error_fatal); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = isa_create(bus, args); + dev = isa_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + isa_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(isa_create(bus, args)); + ISADevice *isa_dev; // TODO move + isa_dev = isa_new(args); + dev = DEVICE(isa_dev); ... when != dev = expr - qdev_init_nofail(dev); + isa_realize_and_unref(isa_dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-20-armbru@redhat.com>
2020-06-15pci: Convert uses of pci_create() etc. with CoccinelleMarkus Armbruster2-4/+4
Replace dev = pci_create(bus, type_name); ... qdev_init_nofail(dev); by dev = pci_new(type_name); ... pci_realize_and_unref(dev, bus, &error_fatal); and similarly for pci_create_multifunction(). Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Coccinelle script: @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; expression d; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ( d = &dev->qdev; | d = DEVICE(dev); ) ... when != dev = expr - qdev_init_nofail(d); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create(bus, args); + dev = pci_new(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = DEVICE(pci_create(bus, args)); + PCIDevice *pci_dev; // TODO move + pci_dev = pci_new(args); + dev = DEVICE(pci_dev); ... when != dev = expr - qdev_init_nofail(dev); + pci_realize_and_unref(pci_dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, expr; expression list args; identifier dev; @@ - PCIDevice *dev = pci_create_multifunction(bus, args); + PCIDevice *dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(&dev->qdev); + pci_realize_and_unref(dev, bus, &error_fatal); @@ expression dev, bus, expr; expression list args; @@ - dev = pci_create_multifunction(bus, args); + dev = pci_new_multifunction(args); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + pci_realize_and_unref(dev, bus, &error_fatal); Missing #include "qapi/error.h" added manually, whitespace changes minimized manually, @pci_dev declarations moved manually. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-16-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15hw/ppc: Eliminate two superfluous QOM castsMarkus Armbruster2-4/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-15-armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-15qdev: Convert uses of qdev_set_parent_bus() manuallyMarkus Armbruster1-4/+2
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-13-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() manuallyMarkus Armbruster1-2/+2
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
2020-06-15qdev: Convert uses of qdev_create() with CoccinelleMarkus Armbruster11-70/+72
This is the transformation explained in the commit before previous. Takes care of just one pattern that needs conversion. More to come in this series. Coccinelle script: @ depends on !(file in "hw/arm/highbank.c")@ expression bus, type_name, dev, expr; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr; identifier DOWN; @@ - dev = DOWN(qdev_create(bus, type_name)); + dev = DOWN(qdev_new(type_name)); ... when != dev = expr - qdev_init_nofail(DEVICE(dev)); + qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal); @@ expression bus, type_name, expr; identifier dev; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - qdev_init_nofail(dev); + qdev_realize_and_unref(dev, bus, &error_fatal); @@ expression bus, type_name, dev, expr, errp; symbol true; @@ - dev = qdev_create(bus, type_name); + dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); @@ expression bus, type_name, expr, errp; identifier dev; symbol true; @@ - DeviceState *dev = qdev_create(bus, type_name); + DeviceState *dev = qdev_new(type_name); ... when != dev = expr - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize_and_unref(dev, bus, errp); The first rule exempts hw/arm/highbank.c, because it matches along two control flow paths there, with different @type_name. Covered by the next commit's manual conversions. Missing #include "qapi/error.h" added manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-10-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert to qdev_unrealize() with CoccinelleMarkus Armbruster2-6/+5
For readability, and consistency with qbus_realize(). Coccinelle script: @ depends on !(file in "hw/core/qdev.c")@ typedef DeviceState; DeviceState *dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(dev); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression dev; symbol false, error_abort; @@ - object_property_set_bool(OBJECT(dev), false, "realized", &error_abort); + qdev_unrealize(DEVICE(dev)); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-8-armbru@redhat.com>
2020-06-15pnv/psi: Correct the pnv-psi* devices not to be sysbus devicesMarkus Armbruster1-1/+1
pnv_chip_power8_instance_init() creates a "pnv-psi-POWER8" sysbus device in a way that leaves it unplugged. pnv_chip_power9_instance_init() and pnv_chip_power10_instance_init() do the same for "pnv-psi-POWER9" and "pnv-psi-POWER10", respectively. These devices aren't actually sysbus devices. Correct that. Cc: "Cédric Le Goater" <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200609122339.937862-18-armbru@redhat.com>
2020-06-15ppc/pnv: Put "*-pnv-chip" and "pnv-xive" on the main system busMarkus Armbruster1-3/+3
pnv_init() creates "power10_v1.0-pnv-chip", "power8_v2.0-pnv-chip", "power8e_v2.1-pnv-chip", "power8nvl_v1.0-pnv-chip", or "power9_v2.0-pnv-chip" sysbus devices in a way that leaves them unplugged. pnv_chip_power9_instance_init() creates a "pnv-xive" sysbus device in a way that leaves it unplugged. Create them the common way that puts them into the main system bus. Affects machines powernv8, powernv9, and powernv10. Visible in "info qtree". Here's the change for powernv9: bus: main-system-bus type System + dev: power9_v2.0-pnv-chip, id "" + chip-id = 0 (0x0) + ram-start = 0 (0x0) + ram-size = 1879048192 (0x70000000) + nr-cores = 1 (0x1) + cores-mask = 72057594037927935 (0xffffffffffffff) + nr-threads = 1 (0x1) + num-phbs = 6 (0x6) + mmio 000603fc00000000/0000000400000000 [...] + dev: pnv-xive, id "" + ic-bar = 1692157036462080 (0x6030203100000) + vc-bar = 1689949371891712 (0x6010000000000) + pc-bar = 1690499127705600 (0x6018000000000) + tm-bar = 1692157036986368 (0x6030203180000) Cc: "Cédric Le Goater" <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200609122339.937862-17-armbru@redhat.com>
2020-06-15ppc4xx: Drop redundant device realizationMarkus Armbruster1-2/+0
object_property_set_bool(OBJECT(dev), true, "realized", ...) right after qdev_init_nofail(dev) does nothing, because qdev_init_nofail() already realizes. Drop. Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200609122339.937862-14-armbru@redhat.com>
2020-05-27ppc/spapr: Add hotremovable flag on DIMM LMBs on drmem_v2Leonardo Bras2-5/+6
On reboot, all memory that was previously added using object_add and device_add is placed in this DIMM area. The new SPAPR_LMB_FLAGS_HOTREMOVABLE flag helps Linux to put this memory in the correct memory zone, so no unmovable allocations are made there, allowing the object to be easily hot-removed by device_del and object_del. This new flag was accepted in Power Architecture documentation. Signed-off-by: Leonardo Bras <leobras.c@gmail.com> Reviewed-by: Bharata B Rao <bharata@linux.ibm.com> Message-Id: <20200511200201.58537-1-leobras.c@gmail.com> [dwg: Fixed syntax error spotted by Cédric Le Goater] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-27ppc/spapr: add a POWER10 CPU modelCédric Le Goater1-0/+1
Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200507073855.2485680-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-27ppc/pnv: Fix NMI system reset SRR1 valueNicholas Piggin1-6/+20
Commit a77fed5bd926 ("ppc/pnv: Add support for NMI interface") got the SRR1 setting wrong for sresets that hit outside of power-save states. Fix this, better documenting the source for the bit definitions. Fixes: 01b552b05b0f ("ppc/pnv: Add support for NMI interface") Cc: Cédric Le Goater <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200507114824.788942-1-npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [dwg: Fixed up some tab indentation] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-15hw: Remove unnecessary DEVICE() castPhilippe Mathieu-Daudé1-1/+1
The DEVICE() macro is defined as: #define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE) which expands to: ((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name), __FILE__, __LINE__, __func__)) This assertion can only fail when @obj points to something other than its stated type, i.e. when we're in undefined behavior country. Remove the unnecessary DEVICE() casts when we already know the pointer is of DeviceState type. Patch created mechanically using spatch with this script: @@ typedef DeviceState; DeviceState *s; @@ - DEVICE(s) + s Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Paul Durrant <paul@xen.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
2020-05-15qom: Drop @errp parameter of object_property_del()Markus Armbruster1-2/+2
Same story as for object_property_add(): the only way object_property_del() can fail is when the property with this name does not exist. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Most callers do that, the commit before previous fixed one that didn't (and got the error handling wrong), and the two remaining exceptions ignore errors. Drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-05-15spapr_pci: Drop some dead error handlingMarkus Armbruster1-68/+18
chassis_from_bus() uses object_property_get_uint() to get property "chassis_nr" of the bridge device. Failure would be a programming error. Pass &error_abort, and simplify its callers. Cc: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-18-armbru@redhat.com>
2020-05-15qdev: Unrealize must not failMarkus Armbruster7-27/+17
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15Drop more @errp parameters after previous commitMarkus Armbruster2-4/+3
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster15-65/+39
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-05-15qom: Drop object_property_set_description() parameter @errpMarkus Armbruster5-24/+12
object_property_set_description() and object_class_property_set_description() fail only when property @name is not found. There are 85 calls of object_property_set_description() and object_class_property_set_description(). None of them can fail: * 84 immediately follow the creation of the property. * The one in spapr_rng_instance_init() refers to a property created in spapr_rng_class_init(), from spapr_rng_properties[]. Every one of them still gets to decide what to pass for @errp. 51 calls pass &error_abort, 32 calls pass NULL, one receives the error and propagates it to &error_abort, and one propagates it to &error_fatal. I'm actually surprised none of them violates the Error API. What are we gaining by letting callers handle the "property not found" error? Use when the property is not known to exist is simpler: you don't have to guard the call with a check. We haven't found such a use in 5+ years. Until we do, let's make life a bit simpler and drop the @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-8-armbru@redhat.com> [One semantic rebase conflict resolved]
2020-05-15qom: Clean up inconsistent use of gchar * vs. char *Markus Armbruster1-1/+1
Uses of gchar * in qom/object.h: * ObjectProperty member @name Functions that take a property name argument all use char *. Change the member to match. * ObjectProperty member @type Functions that take a property type argument or return it all use char *. Change the member to match. * ObjectProperty member @description Functions that take a property description argument all use char *. Change the member to match. * object_resolve_path_component() parameter @part Path components are property names. Most callers pass char * arguments. Change the parameter to match. Adjust the few callers that pass gchar * to pass char *. * Return value of object_get_canonical_path_component(), object_get_canonical_path() Most callers convert their return values right back to char *. Change the return value to match. Adjust the few callers where that would add a conversion to gchar * to use char * instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-3-armbru@redhat.com>
2020-05-07Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.1-20200507' ↵Peter Maydell5-77/+103
into staging ppc patch queue for 2020-04-07 First pull request for qemu-5.1. This includes: * Removal of all remaining cases where we had CAS triggered reboots * A number of improvements to NMI injection * Support for partition scoped radix translation in softmmu * Some fixes for NVDIMM handling * A handful of other minor fixes # gpg: Signature made Thu 07 May 2020 06:00:55 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-5.1-20200507: target-ppc: fix rlwimi, rlwinm, rlwnm for Clang-9 spapr_nvdimm: Tweak error messages spapr_nvdimm.c: make 'label-size' mandatory target/ppc: Add support for Radix partition-scoped translation target/ppc: Rework ppc_radix64_walk_tree() for partition-scoped translation target/ppc: Extend ppc_radix64_check_prot() with a 'partition_scoped' bool target/ppc: Introduce ppc_radix64_xlate() for Radix tree translation spapr: Don't allow unplug of NVLink2 devices target/ppc: Assert if HV mode is set when running under a pseries machine target/ppc: Introduce a relocation bool in ppc_radix64_handle_mmu_fault() target/ppc: Enforce that the root page directory size must be at least 5 spapr: Drop CAS reboot flag spapr/cas: Separate CAS handling from rebuilding the FDT spapr: Simplify selection of radix/hash during CAS ppc/pnv: Add support for NMI interface ppc/spapr: tweak change system reset helper spapr: Don't check capabilities removed between CAS calls target/ppc: Improve syscall exception logging Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-05-07spapr_nvdimm: Tweak error messagesDavid Gibson1-3/+3
The restrictions here (which are checked at pre-plug time) are PAPR specific, rather than being inherent to the NVDIMM devices. Adjust the error messages to be clearer about this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr_nvdimm.c: make 'label-size' mandatoryDaniel Henrique Barboza1-0/+6
The pseries machine does not support NVDIMM modules without label. Attempting to do so, even if the overall block size is aligned with 256MB, will seg fault the guest kernel during NVDIMM probe. This can be avoided by forcing 'label-size' to always be present for sPAPR NVDIMMs. The verification was put before the alignment check because the presence of label-size affects the alignment calculation, so it's not optimal to warn the user about an alignment error, then about the lack of label-size, then about a new alignment error when the user sets a label-size. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20200413203628.31636-1-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr: Don't allow unplug of NVLink2 devicesDavid Gibson1-0/+4
Currently, we can't properly handle unplug of NVLink2 devices, because we don't have code to tear down their special memory resources. There's not a lot of impetus to implement that: since hardware NVLink2 devices can't be hot unplugged, the guest side drivers don't usually support unplug anyway. Therefore, simply prevent unplug of NVLink2 devices. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2020-05-07spapr: Drop CAS reboot flagGreg Kurz2-33/+18
The CAS reboot flag is false by default and all the locations that could set it to true have been dropped. This means that all code blocks depending on the flag being set is dead code and the other code blocks should be executed always. Just do that and drop the now uneeded CAS reboot flag. Fix a comment on the way to make checkpatch happy. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514994893.478799.11772512888322840990.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr/cas: Separate CAS handling from rebuilding the FDTAlexey Kardashevskiy2-27/+41
At the moment "ibm,client-architecture-support" ("CAS") is implemented in SLOF and QEMU assists via the custom H_CAS hypercall which copies an updated flatten device tree (FDT) blob to the SLOF memory which it then uses to update its internal tree. When we enable the OpenFirmware client interface in QEMU, we won't need to copy the FDT to the guest as the client is expected to fetch the device tree using the client interface. This moves FDT rebuild out to a separate helper which is going to be called from the "ibm,client-architecture-support" handler and leaves writing FDT to the guest in the H_CAS handler. This should not cause any behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20200310050733.29805-3-aik@ozlabs.ru> Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514994229.478799.2178881312094922324.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr: Simplify selection of radix/hash during CASGreg Kurz2-5/+2
The guest can select the MMU mode by setting bits 0-1 of byte 24 in OV5 to to 0b00 for hash or 0b01 for radix. As required by the architecture, we terminate the boot process if any other value is found there. The usual way to negotiate features in OV5 is basically ANDing the bitfield provided by the guest and the bitfield of features supported by QEMU, previously populated at machine init. For some not documented reason, MMU is treated differently : bit 1 of byte 24 (the radix/hash bit) is cleared from the guest OV5 and explicitely set in the final negotiated OV5 if radix was requested. Since the only expected input from the guest is the radix/hash bit being set or not, it seems more appropriate to handle this like we do for XIVE. Set the radix bit in spapr->ov5 at machine init if it has a chance to work (ie. power9, either TCG or a radix capable KVM) and rely exclusively on spapr_ovec_intersect() to set the radix bit in spapr->ov5_cas. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514993621.478799.4204740354545734293.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07ppc/pnv: Add support for NMI interfaceNicholas Piggin1-0/+29
This implements the NMI interface for the PNV machine, similarly to commit 3431648272d ("spapr: Add support for new NMI interface") for SPAPR. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325144147.221875-3-npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07ppc/spapr: tweak change system reset helperNicholas Piggin1-3/+6
Rather than have the helper take an optional vector address override, instead have its caller modify env->nip itself. This is more consistent when adding pnv nmi support, and also with mce injection added later. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325144147.221875-2-npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-07spapr: Don't check capabilities removed between CAS callsGreg Kurz1-13/+1
We currently check if some capability in OV5 was removed by the guest since the previous CAS, and we trigger a CAS reboot in that case. This was required because it could call for a device-tree property or node removal, that we didn't support until recently (see commit 6787d27b04a7 "spapr: add option vector handling in CAS-generated resets" for details). Now that we render a full FDT at CAS and that SLOF is able to handle node removal, we don't need to do a CAS reset in this case anymore. Also, this check can only return true if the guest has already called CAS since the last full system reset (otherwise spapr->ov5_cas is empty). Linux doesn't do that so this can be considered as dead code for the vast majority of existing setups. Drop the check. Since the only use of the ov5_cas_old variable is precisely the check itself, drop the variable as well. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158514993021.478799.10928618293640651819.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-05-06hw: add compat machines for 5.1Cornelia Huck1-2/+13
Add 5.1 machine types for arm/i440fx/q35/s390x/spapr. Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20200429144605.7262-1-cohuck@redhat.com
2020-04-29bamboo, sam460ex: Tidy up error message for unsupported RAM sizeMarkus Armbruster1-4/+4
Improve $ ppc-softmmu/qemu-system-ppc -M sam460ex -m 4096 qemu-system-ppc: Max 1 banks of 2048 ,1024 ,512 ,256 ,128 ,64 ,32 MB DIMM/bank supported qemu-system-ppc: Possible valid RAM size: 2048 to qemu-system-ppc: at most 1 bank of 2048, 1024, 512, 256, 128, 64, 32 MiB each supported Possible valid RAM size: 1024 MiB Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200422134815.1584-4-armbru@redhat.com> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-29smbus: Fix spd_data_generate() error API violationMarkus Armbruster1-9/+3
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. spd_data_generate() can pass @errp to error_setg() more than once when it adjusts both memory size and type. Harmless, because no caller passes anything that needs adjusting. Until the previous commit, sam460ex passed types that needed adjusting, but not sizes. spd_data_generate()'s contract is rather awkward: If everything's fine, return non-null and don't set an error. Else, if memory size or type need adjusting, return non-null and set an error describing the adjustment. Else, return null and set an error reporting why no data can be generated. Its callers treat the error as a warning even when null is returned. They don't create the "smbus-eeprom" device then. Suspicious. Since the previous commit, only "everything's fine" can actually happen. Drop the unused code and simplify the callers. This gets rid of the error API violation. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200422134815.1584-3-armbru@redhat.com>
2020-04-29sam460ex: Suppress useless warning on -m 32 and -m 64Markus Armbruster1-1/+2
Requesting 32 or 64 MiB of RAM with the sam460ex machine type produces a useless warning: qemu-system-ppc: warning: Memory size is too small for SDRAM type, adjusting type This is because sam460ex_init() asks spd_data_generate() for DDR2, which is impossible, so spd_data_generate() corrects it to DDR. The warning goes back to commit 08fd99179a "sam460ex: Clean up SPD EEPROM creation". Make sam460ex_init() pass the correct SDRAM type to get rid of the warning. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200422134815.1584-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-04-07ppc/pnv: Create BMC devices only when defaults are enabledCédric Le Goater2-5/+72
Commit e2392d4395dd ("ppc/pnv: Create BMC devices at machine init") introduced default BMC devices which can be a problem when the same devices are defined on the command line with : -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-bt,bmc=bmc0,irq=10 QEMU fails with : qemu-system-ppc64: error creating device tree: node: FDT_ERR_EXISTS Use defaults_enabled() when creating the default BMC devices to let the user provide its own BMC devices using '-nodefaults'. If no BMC device are provided, output a warning but let QEMU run as this is a supported configuration. However, when multiple BMC devices are defined, stop QEMU with a clear error as the results are unexpected. Fixes: e2392d4395dd ("ppc/pnv: Create BMC devices at machine init") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200404153655.166834-1-clg@kaod.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07hw/ppc/ppc440_uc.c: Remove incorrect iothread locking from dcr_write_pcie()Peter Maydell1-3/+0
In dcr_write_pcie() we take the iothread lock around a call to pcie_host_mmcfg_udpate(). This is an incorrect attempt to deal with the bug fixed in commit 235352ee6e73d7716, where we were not taking the iothread lock before calling device dcr read/write functions. (It's not sufficient locking, because although the other cases in the switch statement won't assert, there is no locking which prevents multiple guest CPUs from trying to access the PPC460EXPCIEState struct at the same time and corrupting data.) Unfortunately with commit 235352ee6e73d7716 we are now trying to recursively take the iothread lock, which will assert: $ qemu-system-ppc -M sam460ex --display none ** ERROR:/home/petmay01/linaro/qemu-from-laptop/qemu/cpus.c:1830:qemu_mutex_lock_iothread_impl: assertion failed: (!qemu_mutex_iothread_locked()) Aborted (core dumped) Remove the locking within dcr_write_pcie(). Fixes: 235352ee6e73d7716 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200330125228.24994-1-peter.maydell@linaro.org> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07spapr: Fix failure path for attempting to hot unplug PCI bridgesDavid Gibson1-0/+1
For various technical reasons we can't currently allow unplug a PCI to PCI bridge on the pseries machine. spapr_pci_unplug_request() correctly generates an error message if that's attempted. But.. if the given errp is not error_abort or error_fatal, it doesn't actually stop trying to unplug the bridge anyway. Fixes: 14e714900f6b "spapr: Allow hot plug/unplug of PCI bridges and devices under PCI bridges" Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org>
2020-04-07ppc/spapr: Don't kill the guest if a recovered FWNMI machine check delivery ↵Nicholas Piggin1-5/+25
fails Try to be tolerant of FWNMI delivery errors if the machine check had been recovered by the host. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-5-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> [dwg: Updated comment at Greg's suggestion] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: Add FWNMI machine check delivery warningsNicholas Piggin2-0/+7
Add some messages which explain problems and guest misbehaviour that may be difficult to diagnose in rare cases of machine checks. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-4-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: Improve FWNMI machine check delivery corner case commentsNicholas Piggin1-8/+11
Some of the conditions are not as clearly documented as they could be. Also the non-FWNMI case does not need a large comment. Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-3-npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07ppc/spapr: KVM FWNMI should not be enabled until guest requests itNicholas Piggin2-3/+11
The KVM FWNMI capability should be enabled with the "ibm,nmi-register" rtas call. Although MCEs from KVM will be delivered as architected interrupts to the guest before "ibm,nmi-register" is called, KVM has different behaviour depending on whether the guest has enabled FWNMI (it attempts to do more recovery on behalf of a non-FWNMI guest). Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Message-Id: <20200325142906.221248-2-npiggin@gmail.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-04-07hw/ppc/e500.c: Handle qemu_find_file() failurePeter Maydell1-0/+4
If qemu_find_file() doesn't find the BIOS it returns NULL; we were passing that unchecked through to load_elf(), which assumes a non-NULL pointer and may misbehave. In practice it fails with a weird message: $ qemu-system-ppc -M ppce500 -display none -kernel nonesuch Bad address qemu-system-ppc: could not load firmware '(null)' Handle the failure case better: $ qemu-system-ppc -M ppce500 -display none -kernel nonesuch qemu-system-ppc: could not find firmware/kernel file 'nonesuch' Spotted by Coverity (CID 1238954). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200324121216.23899-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-24ppc/ppc405_boards: Remove unnecessary NULL checkPhilippe Mathieu-Daudé1-3/+3
This code is inside the "if (dinfo)" condition, so testing again here whether it is NULL is unnecessary. Fixes: dd59bcae7 (Don't size flash memory to match backing image) Reported-by: Coverity (CID 1421917) Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200320155740.5342-1-philmd@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-03-24spapr: Fix memory leak in h_client_architecture_support()Greg Kurz1-0/+1
This is the only error path that needs to free the previously allocated ov1. Reported-by: Coverity (CID 1421924) Fixes: cbd0d7f36322 "spapr: Fail CAS if option vector table cannot be parsed" Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <158481206205.336182.16106097429336044843.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-24ppc/spapr: Set the effective address provided flag in mc error log.Mahesh Salgaonkar1-0/+26
Per PAPR, it is expected to set effective address provided flag in sub_err_type member of mc extended error log (i.e rtas_event_log_v6_mc.sub_err_type). This somehow got missed in original fwnmi-mce patch series. The current code just updates the effective address but does not set the flag to indicate that it is available. Hence guest fails to extract effective address from mce rtas log. This patch fixes that. Without this patch guest MCE logs fails print DAR value: [ 11.933608] Disabling lock debugging due to kernel taint [ 11.933773] MCE: CPU0: machine check (Severe) Host TLB Multihit [Recovered] [ 11.933979] MCE: CPU0: NIP: [c000000000090b34] radix__flush_tlb_range_psize+0x194/0xf00 [ 11.934223] MCE: CPU0: Initiator CPU [ 11.934341] MCE: CPU0: Unknown After the change: [ 22.454149] Disabling lock debugging due to kernel taint [ 22.454316] MCE: CPU0: machine check (Severe) Host TLB Multihit DAR: deadbeefdeadbeef [Recovered] [ 22.454605] MCE: CPU0: NIP: [c0000000003e5804] kmem_cache_alloc+0x84/0x330 [ 22.454820] MCE: CPU0: Initiator CPU [ 22.454944] MCE: CPU0: Unknown Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com> Message-Id: <158451653844.22972.17999316676230071087.stgit@jupiter> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.1 at 2025-09-23 13:51:07 +0000