aboutsummaryrefslogtreecommitdiff
path: root/hw/ppc
AgeCommit message (Collapse)AuthorFilesLines
2013-05-06PPC: e500: correct params->ram_size with ram_sizeTiejun Chen1-0/+1
We should sync params->ram_size after we fixup memory size on a alignment boundary. Otherwise Guest would exceed the actual memory region. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06PPC: e500: initialize GPRs as per epaprBharat Bhushan1-3/+27
ePAPR defines the initial values of cpu registers. This patch initialize the GPRs as per ePAPR specification. This resolves the issue of guest reboot/reset (guest hang on reboot). Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: add whitespace line] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06pseries: Fix debug message for out-of-bounds address in H_PUT_TCEDavid Gibson1-1/+1
Due to a brain outage, this message says "out-of-boards" instead of "out-of-bounds". Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06pseries: Factor out check for out-of-bounds LIOBNDavid Gibson1-6/+6
PAPR defines LIOBNs (Logical IO Bus Numbers) to be 32-bit, and we check for values that aren't in the code for H_PUT_TCE. This patch factors the check into spapr_tce_find_by_liobn(), which already checks if a 32-bit LIOBN actually exists. This will become more important as future patches add other hypercalls which need to look up a LIOBN. At the same time we fix the typo in the message. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-05-06prep: Make System I/O port 0092 read/writeJulio Guerra1-1/+1
Port 0x0092 is documented as read/write, so for now return the endianness state instead of hardcoded 0x00. Signed-off-by: Julio Guerra <guerr@julio.in> [AF: Extracted from larger port 0092 patch] Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-05-05prep: Add ELF support for -biosAndreas Färber1-9/+22
This prepares for switching from OpenHack'Ware to OpenBIOS. While touching the error handling code, switch from aborting hw_error() to fprintf()+exit() and suppress failing without -bios for qtest. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-05-05prep: Fix NIP reset valueFabien Chouteau1-0/+3
The value was changed by commit 09d9828ace37ead29d510a7e24e63c2f15cd4b1c "PPC: fix hreset_vector for 60x, ...". Change it back for prep machine to unbreak OpenHack'Ware. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-04-29audio: enable PCI audio cards for all PCI-enabled targetsPaolo Bonzini1-3/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: look for the ISA and PCI busesPaolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-8-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26pseries: Generate device paths for VIO devicesDavid Gibson1-14/+23
This patch implements a get_dev_path qdev hook for the pseries paravirtual VIO bus. With upcoming savevm support, this will become very important for scsi disks hanging of VIO virtual SCSI adapters. scsibus_get_dev_path uses the get_dev_path of the parent adapter if available, but otherwise just uses a local channel/target/lun number to identify the device. So if two disks are present in the system having the same target and lun on seperate VIO scsi adapters, savevm cannot distinguish them. Since the conventional way of using VSCSI adapters is to have just one disk per adapter, such a conflict is very likely. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26pseries: Convert VIO code to QOM style type safe(ish) castsDavid Gibson1-2/+2
Curerntly the pseries VIO device code contains quite a few explicit uses of DO_UPCAST and plain C casts. This is (obviously) type unsafe, and not the conventional way of doing things in the QOM model. This patch converts the code to use the QOM convention of per-type macros to do verified casts with OBJECT_CHECK(). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26pseries: Fix some small errors in XICS logicDavid Gibson1-0/+2
Under certain circumstances the emulation for the pseries "XICS" interrupt controller was clearing a pending interrupt from the XISR register, without also clearing the corresponding priority variable. This will cause problems later when can trigger sanity checks in the under-development in-kernel XICS implementation. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26pseries: Fixes and enhancements to L1 cache propertiesDavid Gibson1-2/+19
PAPR requires that the device tree's CPU nodes have several properties with information about the L1 cache. We already create two of these properties, but with incorrect names - "[id]cache-block-size" instead of "[id]-cache-block-size" (note the extra hyphen). We were also missing some of the required cache properties. This patch adds the [id]-cache-line-size properties (which have the same values as the block size properties in all current cases). We also add the [id]-cache-size properties. Adding the cache sizes requires some extra infrastructure in the general target-ppc code to (optionally) set the cache sizes for various CPUs. The CPU family descriptions in translate_init.c can set these sizes - this patch adds correct information for POWER7, I'm leaving other CPU types to people who have a physical example to verify against. In addition, for -cpu host we take the values advertised by the host (if available) and use those to override the information based on PVR. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26PPC: mac newworld: fix cpu NIP reset valueAlexander Graf1-0/+2
On -M mac99, we can run 970 CPUs. However, these CPUs define the initial instruction pointer they start execution at as part of their bootup protocol, so effectively it's up to the board to decide where they start. This went unnoticed, because they used to boot at the same location our flash was mapped to, but due to the recent reset changes our 970 CPUs want to reset to 0x100 now, which is always a 0 instruction. Set the initial IP to something reasonable for -M mac99. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
2013-04-26Enable kvm emulated watchdogBharat Bhushan1-4/+41
Enable the KVM emulated watchdog if KVM supports (use the capability enablement in watchdog handler). Also watchdog exit (KVM_EXIT_WATCHDOG) handling is added. Watchdog state machine is cleared whenever VM state changes to running. This is to handle the cases like return from debug halt etc. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: rebase to current code base, fix non-kvm cases] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26PPC: Remove env->hreset_excp_prefixFabien Chouteau1-2/+4
This value is not needed if we use correctly the MSR[IP] bit. excp_prefix is always 0x00000000, except when the MSR[IP] bit is implemented and set to 1, in that case excp_prefix is 0xfff00000. The handling of MSR[IP] was already implemented but not used at reset because the value of env->msr was changed "manually". The patch uses the function hreg_store_msr() to set env->msr, this ensures a good handling of MSR[IP] at reset, and therefore a good value for excp_prefix. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26PPC: e500: advertise 4.2 MPIC only if KVM supports EPRStuart Yoder1-0/+7
Older KVM versions don't support EPR which breaks guests when we announce MPIC variants that support EPR. Catch that case and expose only MPIC version 2.0 which tells the guest that we don't support the EPR capability yet. Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> [agraf: Add comment, route cap check through kvm_ppc.c] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-19Remove unneeded type castsStefan Weil2-2/+2
cpu_physical_memory_read, cpu_physical_memory_write take any pointer as 2nd argument without needing a type cast. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini2-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15arm: fix location of some include filesPeter Maydell1-1/+1
The recent rearrangement of include files had some minor errors: devices.h is not ARM specific and should not be in arm/ arm.h should be in arm/ Move these two headers to correct this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini5-4/+85
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/Paolo Bonzini1-5/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move PCI bridges to hw/pci-* or hw/ARCHPaolo Bonzini3-3/+1255
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move SCSI controllers to hw/scsi/, configure via default-configs/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini1-4/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move MC146818RTC to hw/timer/, configure via default-configs/Paolo Bonzini1-2/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/pci/ configurable via default-configs/Paolo Bonzini1-1/+1
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini21-62/+62
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-22mmu-hash*: Add hash pte load/store helpersDavid Gibson1-19/+19
On real hardware the ppc hash page table is stored in memory; accordingly our mmu emulation code can read a hash page table in guest memory. But, when paravirtualized under PAPR, the real hash page table is in host memory, accessible to the guest only via hypercalls. We model this by also allowing the MMU emulation code to access a specially allocated hash page table outside the guest's memory image. At present these two options are implemented with some ugly conditionals at each access point in the mmu emulation code. In the implementation of the PAPR hypercalls, we assume the external hash table. This patch cleans things up by adding helpers to load and store from the hash table for both 32-bit and 64-bit hash mmus. The 64-bit versions handle both the in-guest-memory and outside guest memory cases. The 32-bit versions only handle the in-guest-memory case since no 32-bit systems can have an external hash table at present. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22mmu-hash*: Add header file for definitionsDavid Gibson1-51/+19
Currently cpu.h contains a number of definitions relating to the 64-bit hash MMU. Some are used in the MMU emulation code, but some are only used in the spapr MMU management hcall implementations. This patch moves these definitions (except for a few that are needed more widely) into mmu-hash64.h header, shared between the MMU emulation code and the spapr hcall code. The MMU emulation code is also updated to actually use a number of those definitions in place of hard coded constants. Similarly, we add new analogous definitions to mmu-hash32.h and use those in place of many hard-coded constants in mmu-hash32.c Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [agraf: fix 32-bit hosts] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22pseries: Move XICS initialization before cpu initializationDavid Gibson2-37/+32
Currently, the pseries machine initializes the cpus, then the XICS interrupt controller. However, to support the upcoming in-kernel XICS implementation we will need to initialize the irq controller before the vcpus. This patch makes the necesssary rearrangement. This means the xics init code can no longer auto-detect the number of cpus ("interrupt servers" in XICS terminology) and so we must pass that in explicitly from the platform code. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22pseries: Remove "busname" property for PCI host bridgeDavid Gibson1-1/+1
Currently the "spapr-pci-host-bridge" device has a "busname" property which can be used to override the default assignment of qbus names for the bus subordinate to the PHB. We use that for the default primary PCI bus, to make libvirt happy, which expects there to be a bus named simply "pci". The default qdev core logic would name the bus "pci.0", and the pseries code would otherwise name it "pci@800000020000000" which is the name it is given in the device tree based on its BUID. The "busname" property is rather clunky though, so this patch simplifies things by just using a special case hack for the default PHB, setting busname to "pci" when index=0. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22pseries: Fix breakage in CPU QOM conversionDavid Gibson1-1/+1
Commit 259186a7d2f7184efc96ae99bc5658e6159f53ad "cpu: Move halted and interrupt_request fields to CPUState" broke the pseries machine. That's because it uses CPU() instead of ENV_GET_CPU() to convert from the global first_cpu pointer (still a CPUArchState) to a CPUState. This patch fixes the breakage. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-12cpu: Pass CPUState to cpu_interrupt()Andreas Färber2-5/+5
Move it to qom/cpu.h to avoid issues with include order. Change pc_acpi_smi_interrupt() opaque to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12exec: Pass CPUState to cpu_reset_interrupt()Andreas Färber1-2/+4
Move it to qom/cpu.c to avoid build failures depending on include order of cpu-qom.h and exec/cpu-all.h. Change opaques of various ..._irq_handler() functions to the appropriate CPU type to facilitate using cpu_reset_interrupt(). Fix Coding Style issues while at it (missing braces, indentation). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber6-20/+32
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-10Merge remote-tracking branch 'origin/master' into stagingAnthony Liguori3-1/+33
* origin/master: (75 commits) tcg: Don't make exitreq flag a local temporary Makefile: Add subdir dependency on config-devices-all.mak make_device_config.sh: Emit dependency file to directory where included Revert "make_device_config.sh: Fix target path in generated dependency file" s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del s390/css: Fix subchannel detection Allow virtio-net features for legacy s390 virtio bus s390: virtio-ccw maintainer s390: simplify kvm cpu init pseries: Add compatible property to root of device tree target-ppc: Move CPU aliases out of translate_init.c target-ppc: Report CPU aliases for QMP target-ppc: List alias names alongside CPU models target-ppc: Make host CPU a subclass of the host's CPU model PPC: xnu kernel expects FLUSH to be cleared on STOP PPC: Fix dma interrupt target-ppc: Fix PPC_DUMP_SPR_ACCESS build target-ppc: Synchronize FPU state with KVM target-ppc: Add mechanism for synchronizing SPRs with KVM Save memory allocation in the elf loader ...
2013-03-10Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori20-17/+10412
* bonzini/hw-dirs: sh: move files referencing CPU to hw/sh4/ ppc: move more files to hw/ppc ppc: move files referencing CPU to hw/ppc/ m68k: move files referencing CPU to hw/m68k/ i386: move files referencing CPU to hw/i386/ arm: move files referencing CPU to hw/arm/ hw: move boards and other isolated files to hw/ARCH ppc: express FDT dependency of pSeries and e500 boards via default-configs/ build: always link device_tree.o into emulators if libfdt available hw: include hw header files with full paths ppc: do not use ../ in include files vt82c686: vt82c686 is not a PCI host bridge virtio-9p: remove PCI dependencies from hw/9pfs/ virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX hw: move device-hotplug.o to toplevel, compile it once hw: move qdev-monitor.o to toplevel directory hw: move fifo.[ch] to libqemuutil hw: move char backends to backends/ Conflicts: backends/baum.c backends/msmouse.c hw/a15mpcore.c hw/arm/Makefile.objs hw/arm/pic_cpu.c hw/dataplane/event-poll.c hw/dataplane/virtio-blk.c include/char/baum.h include/char/msmouse.h qemu-char.c vl.c Resolve conflicts caused by header movements. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-08PPC: Fix dma interruptAmadeusz Sławiński1-1/+1
In openbios (drivers/ide.c) they are set to 0000000d 00000000 00000002 00000000 0000000e 00000000 00000003 00000000 0000000f 00000000 00000004 00000000 (The last one seems to be not implemented in qemu) It follows convention of how they are set on real machines, both ide and dma ones are increased Real machine one: http://web.archive.org/web/20090107151044/http://penguinppc.org/historical/dev-trees-html/g4_agp_500_2.html 00000013 00000001 0000000b 00000000 00000014 00000001 0000000c 00000000 00000015 00000001 0000000d 00000000 Signed-off-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08pci_host: Drop write-only address_space fieldPeter Maydell1-1/+0
The address_space field of PCIHostState was only ever written, never used. Drop it completely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-01ppc: move more files to hw/ppcPaolo Bonzini5-4/+1693
These sPAPR files do not implement devices, move them over. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: move files referencing CPU to hw/ppc/Paolo Bonzini6-7/+2329
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini8-7/+6392
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: express FDT dependency of pSeries and e500 boards via default-configs/Paolo Bonzini1-2/+2
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01build: always link device_tree.o into emulators if libfdt availablePaolo Bonzini1-1/+0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: do not use ../ in include filesPaolo Bonzini3-3/+3
This simplifies the scripted execution of the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-16e500: Replace open-coded loop with qemu_get_cpu()Andreas Färber1-8/+3
Since we still need env for ppc-specific fields, obtain it via the new env_ptr fields to avoid "cpu" name conflicts between CPUState and PowerPCCPU for now. This fixes a potential issue with env being NULL at the end of the loop but cpu still being a valid pointer corresponding to a previous env. Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-30Merge remote-tracking branch 'afaerber-or/prep-up' into stagingAnthony Liguori2-1/+682
# By Andreas Färber # Via Andreas Färber * afaerber-or/prep-up: prep: Move PReP machine to hw/ppc/ prep_pci: Convert to QOM realizefn prep_pci: Create PCIBus and PCIDevice in-place
generated by cgit v1.1 at 2024-11-02 12:02:52 +0000