aboutsummaryrefslogtreecommitdiff
path: root/hw/pci
AgeCommit message (Collapse)AuthorFilesLines
2019-05-20pci: Simplify pci_bus_is_root()David Gibson1-12/+2
pci_bus_is_root() currently relies on a method in the PCIBusClass. But it's always known if a PCI bus is a root bus when we create it, so using a dynamic method is overkill. This replaces it with an IS_ROOT bit in a new flags field, which is set on root buses and otherwise clear. As a bonus this removes the special is_root logic from pci_expander_bridge, since it already creates its bus as a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
2019-05-20pcie: Remove redundant test in pcie_mmcfg_data_{read,write}()David Gibson1-10/+0
These functions have an explicit test for accesses above the device's config size. But pci_host_config_{read,write}_common() which they're about to call already have checks against the config space limit and do the right thing. So, remove the redundant tests. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20190424041959.4087-2-david@gibson.dropbear.id.au>
2019-05-13hw/pci/pci-stub: Add msi_enabled() and msi_notify() to the pci stubsThomas Huth1-0/+11
Some machines have an AHCI adapter, but no PCI. To be able to compile hw/ide/ahci.c without CONFIG_PCI, we still need the two functions msi_enabled() and msi_notify() for linking. This is required for the new Kconfig-like build system, if a user wants to compile a QEMU binary with just one machine that has AHCI, but no PCI, like the ARM "cubieboard" for example. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-26spapr: Drop duplicate PCI swizzle codeGreg Kurz1-1/+1
LSI mapping in spapr currently open-codes standard PCI swizzling. It thus duplicates the code of pci_swizzle_map_irq_fn(). Expose the swizzling formula so that it can be used with a slot number when building the device tree. Simply drop pci_spapr_map_irq() and call pci_swizzle_map_irq_fn() instead. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155448184841.8446.13959787238854054119.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-04-17pci: Report fatal errors with error_report(), not error_printf()Markus Armbruster1-1/+1
Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190417190641.26814-6-armbru@redhat.com>
2019-04-09pci: Allow PCI bus subtypes to support extended config space accessesGreg Kurz2-1/+25
Some PHB implementations, eg. PAPR used on pseries machine, act like a regular PCI bus rather than a PCIe bus, but allow access to the PCIe extended config space anyway. Introduce a new PCI bus class method to modelize this behaviour and use it when adjusting the config space size limit during accesses. No behaviour change for existing PCI bus types. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155414130271.574858.4253514266378127489.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-28Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell1-0/+6
* Kconfig improvements (msi_nonbroken, imply for default PCI devices) * intel-iommu: sharing passthrough FlatViews (Peter) * Fix for SEV with VFIO (Brijesh) * Allow compilation without CONFIG_PARALLEL (Thomas) # gpg: Signature made Thu 21 Mar 2019 16:42:24 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (23 commits) virtio-vga: only enable for specific boards config-all-devices.mak: rebuild on reconfigure minikconf: fix parser typo intel-iommu: optimize nodmar memory regions test-announce-self: convert to qgraph hw/alpha/Kconfig: DP264 hardware requires e1000 network card hw/hppa/Kconfig: Dino board requires e1000 network card hw/sh4/Kconfig: r2d machine requires the rtl8139 network card hw/ppc/Kconfig: e500 based machines require virtio-net-pci device hw/ppc/Kconfig: Bamboo machine requires e1000 network card hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices hw/mips/Kconfig: Malta machine requires the pcnet network card hw/i386/Kconfig: enable devices that can be created by default hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI hw/isa/Kconfig: i82378 SuperIO requires PC speaker device prep: do not select I82374 hw/i386/Kconfig: PC uses I8257, not I82374 hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL target/i386: sev: Do not pin the ram device memory region memory: Fix the memory region type assignment order ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/rdma/Makefile.objs # hw/riscv/sifive_plic.c
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster1-3/+3
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-18kconfig: add CONFIG_MSI_NONBROKENPaolo Bonzini1-0/+6
Not all interrupt controllers have a working implementation of message-signalled interrupts; in some cases, the guest may expect MSI to work but it won't due to the buggy or lacking emulation. In QEMU this is represented by the "msi_nonbroken" variable. This patch adds a new configuration symbol enabled whenever the binary contains an interrupt controller that will set "msi_nonbroken". We can then use it to remove devices that cannot be possibly added to the machine, because they require MSI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-12pcie: Add a simple PCIe ACS (Access Control Services) helper functionKnut Omang1-0/+38
Implementing an ACS capability on downstream ports and multifunction endpoints indicates isolation and IOMMU visibility to a finer granularity. This creates smaller IOMMU groups in the guest and thus more flexibility in assigning endpoints to guest userspace or an L2 guest. Signed-off-by: Knut Omang <knut.omang@oracle.com> Message-Id: <07489975121696f5573b0a92baaf3486ef51e35d.1550768238.git-series.knut.omang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2019-03-07build: convert pci.mak to KconfigPaolo Bonzini1-0/+3
Instead of including the same list of devices for each target, set CONFIG_PCI to true, and make the devices default to present whenever PCI is available. However, s390x does not want all the PCI devices, so there is a separate symbol to enable them. Done mostly with the following script: while read i; do i=${i%=y}; i=${i#CONFIG_} sed -i -e'/^config '$i'$/!b' -en \ -e'a\' -e' default y if PCI_DEVICES\' -e' depends on PCI' \ `grep -lw $i hw/*/Kconfig` done < default-configs/pci.mak followed by replacing a few "depends on" clauses with "select" whenever the symbol is not really related to PCI. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-31-yang.zhong@intel.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07hw/pci/Makefile.objs: make pcie configurableYang Zhong2-2/+11
Make pcie splited from pci and make it configurable. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-30-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini1-0/+2
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-06qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand3-3/+6
When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-02-22pci: Sanity test minimum downstream LNKSTAAlex Williamson1-3/+10
The entire link status register for SR-IOV VFs is defined as RsvdZ, reads simply return zero. Usually this is nothing more than lspci reporting inconsequentially broken values: LnkSta: Speed unknown, Width x0, ... However, now that we're using the downstream endpoint link status to fill in the value at the parent downstream port, invalid values become a problem. In particular, the PCIe hotplug driver in Linux looks for a valid negotiated link width and will fail to enumerate hot-added downstream endpoints without non-zero value here, ex: pciehp 0000:00:02.0:pcie004: Slot(0): Attention button pressed pciehp 0000:00:02.0:pcie004: Slot(0) Powering on due to button press pciehp 0000:00:02.0:pcie004: Slot(0): Card present pciehp 0000:00:02.0:pcie004: Slot(0): Link Up pciehp 0000:00:02.0:pcie004: link training error: status 0x2000 pciehp 0000:00:02.0:pcie004: Failed to check link status Resolve by using minimum width and speed values for the downstream port link status when the endpoint fails to provide valid values. Long term, we may want to implement emulation in the vfio-pci host driver to suppliment this field with the PF value as the SR-IOV spec seems to allow, but the solution here is compatible should that be implemented later. Fixes: 727b48661f75 ("pci: Sync PCIe downstream port LNKSTA on read") Reported-by: Jens Freimann <jfreimann@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <155060310248.19547.14979269067689441201.stgit@gimli.home> Tested-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-02-17qdev: pass an Object * to qbus_set_hotplug_handler()Michael Roth2-2/+2
Certain devices types, like memory/CPU, are now being handled using a hotplug interface provided by a top-level MachineClass. Hotpluggable host bridges are another such device where it makes sense to use a machine-level hotplug handler. However, unlike those devices, host-bridges have a parent bus (the main system bus), and devices with a parent bus use a different mechanism for registering their hotplug handlers: qbus_set_hotplug_handler(). This interface currently expects a handler to be a subclass of DeviceClass, but this is not the case for MachineClass, which derives directly from ObjectClass. Internally, the interface only requires an ObjectClass, so expose that in qbus_set_hotplug_handler(). Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-05pci/msi: export msi_is_masked()Peter Xu1-1/+1
It is going to be used later on outside MSI code to detect whether one MSI vector is masked out. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14msix: make pba size math more uniformDongli Zhang1-1/+1
In msix_exclusive_bar the bar_pba_size is more than what the pba is expected to have, although this never affects the bar size. Specifically, the math in msix_init_exclusive_bar allocates too much memory in some cases. For example consider nentries = 8. msix_exclusive_bar will give us bar_pba_size = 16. So 16 bytes. However 8 bytes would be enough - this is all that the spec requires. So in practice bar_pba_size sometimes allocates an extra 8 bytes but never more. Since each MSIX entry size is 16 bytes, and since we make sure that table+pba is a power of two, this always leaves a multiple of 16 bytes for the PBA, so extra 8 bytes have no effect. However, its ugly to have pba size temporary variable have an incorrect value. For consistency switch to the formula used in msix_init. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14pci/pcie: stop plug/unplug if the slot is lockedDavid Hildenbrand2-8/+18
We better stop right away. For now, errors would be partially ignored (so the guest might get informed or the device might get unplugged), although actual plug/unplug will be reported as failed to the user. While at it, properly move the check to the pre_plug handler for the plug case, as we can test the slot state before the device will be realized. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini3-24/+24
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-09pci: allow cleanup/unregistration of PCI root busesMichael Roth1-0/+33
This adds cleanup counterparts to pci_register_root_bus(), pci_root_bus_new(), and pci_bus_irqs(). These cleanup routines are needed in the case of hotpluggable PCIHostBridge implementations. Currently we can rely on the object_unparent()'ing of the PCIHostState recursively unparenting and cleaning up it's child buses, but we need explicit calls to also: 1) remove the PCIHostState from pci_host_bridges global list. otherwise, we risk accessing freed memory when we access the list later 2) clean up memory allocated in pci_bus_irqs() Both are handled outside the context of any particular bus or host bridge's init/realize functions, making it difficult to avoid the need for explicit cleanup functions without remodeling how PCIHostBridges are created. So keep it simple and just add them for now. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-20pci: Adjust PCI config limit based on bus topologyAlex Williamson1-0/+26
A conventional PCI bus does not support config space accesses above the standard 256 byte configuration space. PCIe-to-PCI bridges are not permitted to forward transactions if the extended register address field is non-zero and must handle it as an unsupported request (PCIe bridge spec rev 1.0, 4.1.3, 4.1.4). Therefore, we should not support extended config space if there is a conventional bus anywhere on the path to a device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: perform unplug via the hotplug handlerDavid Hildenbrand1-1/+10
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: perform unplug via the hotplug handlerDavid Hildenbrand2-1/+10
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: rename hotplug handler callbacksDavid Hildenbrand1-7/+7
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename shpc_device_hotplug_common() to shpc_device_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: rename hotplug handler callbacksDavid Hildenbrand2-11/+10
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename pcie_cap_slot_hotplug_common() to pcie_cap_slot_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Fill PCIESlot link fields to support higher speeds and widthsAlex Williamson1-0/+74
Make use of the PCIESlot speed and width fields to update link information beyond those configured in pcie_cap_v1_fill(). This is only called for devices supporting a version 2 capability and automatically skips any non-PCIESlot devices. Only devices with increased link values generate any visible config space differences. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pci: Sync PCIe downstream port LNKSTA on readAlex Williamson2-0/+43
The PCIe link speed and width between a downstream device and its upstream port is negotiated on real hardware and susceptible to dynamic changes due to signal issues and power management. In the emulated device case there is no real hardware link, but we still might wish to have some consistency between endpoint and downstream port via a virtual negotiation. There is of course a real link for assigned devices and this same virtual negotiation allows the downstream port to match the endpoint, synchronizing on every read to support underlying physical hardware dynamically adjusting the link. This negotiation is intentionally unidirectional for compatibility. If the endpoint exceeds the capabilities of the downstream port or there is no endpoint device, the downstream port reports negotiation to its maximum speed and width, matching the previous case where negotiation was absent. De-tuning the endpoint to match a virtual link doesn't seem to benefit anyone and is a condition we've thus far reported without functional issues. Note that PCI_EXP_LNKSTA is already ignored for migration compatibility via pcie_cap_v1_fill(). Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Create enums for link speed and widthAlex Williamson1-3/+4
In preparation for reporting higher virtual link speeds and widths, create enums and macros to help us manage them. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw/pci-bridge: Fix invalid free()Matthias Weckbecker1-1/+1
When loadvm'ing a *running* snapshot qemu crashes due to an invalid free. It's fortunately caught early by glibc heap memory corruption protection and qemu gets killed with SIGABRT. Steps to reproduce: 1) Create VM (e.g w/ virsh define) 2) Start the VM and take a snapshot while it's running and having a PCI bridge attached 3) Destroy the VM and revert the running snapshot. This commit fixes the issue. Signed-off-by: Matthias Weckbecker <matthias@weckbecker.name> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: set link state inactive/active after hot unplug/plugZheng Xiang1-0/+12
When VM boots from the latest version of linux kernel, after hot-unpluging virtio-blk disks which are hotplugged into pcie-root-port, the VM's dmesg log shows: [ 151.046242] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0001 from Slot Status [ 151.046365] pciehp 0000:00:05.0:pcie004: Slot(0-3): Attention button pressed [ 151.046369] pciehp 0000:00:05.0:pcie004: Slot(0-3): Powering off due to button press [ 151.046420] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 151.046425] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 151.046464] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 151.046468] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0 [ 156.163421] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 2f1 [ 156.163427] pciehp 0000:00:05.0:pcie004: pciehp_unconfigure_device: domain:bus:dev = 0000:06:00 [ 156.198736] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 156.198772] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400 [ 157.224124] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0018 from Slot Status [ 157.224194] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 [ 157.224220] pciehp 0000:00:05.0:pcie004: pciehp_check_link_active: lnk_status = 2011 [ 157.224223] pciehp 0000:00:05.0:pcie004: Slot(0-3): Link Up [ 157.224233] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 7f1 [ 157.224281] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 157.224285] pciehp 0000:00:05.0:pcie004: pciehp_power_on_slot: SLOTCTRL a8 write cmd 0 [ 157.224300] pciehp 0000:00:05.0:pcie004: __pciehp_link_set: lnk_ctrl = 0 [ 157.224336] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 157.224339] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 159.739294] pci 0000:06:00.0 id reading try 50 times with interval 20 ms to get ffffffff [ 159.739315] pciehp 0000:00:05.0:pcie004: pciehp_check_link_status: lnk_status = 2011 [ 159.739318] pciehp 0000:00:05.0:pcie004: Failed to check link status [ 159.739371] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 159.739394] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400 [ 160.771426] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771452] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 [ 160.771495] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771499] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd 40 [ 160.771535] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771539] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 After analyzing the log information, it seems that qemu doesn't change the Link Status from active to inactive after hot-unplug. This results in the abnormal log after the linux kernel commit d331710ea78fea merged. Furthermore, If I hotplug the same virtio-blk disk after hot-unplug, the virtio-blk would turn on and then back off. So this patch set the Link Status inactive after hot-unplug and active after hot-plug. Signed-off-by: Zheng Xiang <zhengxiang9@huawei.com> Signed-off-by: Zheng Xiang <xiang.zheng@linaro.org> Cc: Wang Haibin <wanghaibin.wang@huawei.com> Cc: qemu-stable@nongnu.org Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-14hw/pci/pci.c: Don't use load_image()Peter Maydell1-1/+5
The load_image() function is deprecated, as it does not let the caller specify how large the buffer to read the file into is. Instead use load_image_size(). While we are converting this code, add an error-check for read failure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181130151712.2312-5-peter.maydell@linaro.org
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau3-9/+10
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-05pci_bridge: fix typo in commentMao Zhongyi1-1/+1
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-10-11qmp, hmp: make subsystem/system-vendor identities optionalDenis V. Lunev1-3/+10
According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20181002135538.12113-1-den@openvz.org> Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-25qmp, hmp: add PCI subsystem id and vendor id to PCI infoDenis V. Lunev1-0/+3
This is a long story. Red Hat has relicensed Windows KVM device drivers in 2018 and there was an agreement that to avoid WHQL driver conflict software manufacturers should set proper PCI subsystem vendor ID in their distributions. Thus PCI subsystem vendor id becomes actively used. The problem is that this field is applied by us via hardware compats. Thus technically it could be lost. This patch adds PCI susbsystem id and vendor id to exportable parameters for validation. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20180918095852.28422-1-den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu1-21/+17
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell1-14/+0
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé1-14/+0
All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-12net: allow using any PCI NICs in -net or -nicPaolo Bonzini1-31/+30
Remove the hard-coded list of PCI NIC names; instead, fill an array using all PCI devices listed under DEVICE_CATEGORY_NETWORK. Keep the old shortcut "virtio" for virtio-net-pci. Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster2-2/+2
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell2-7/+25
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum1-5/+19
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qjson.hMarkus Armbruster1-1/+0
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-19-armbru@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster1-0/+1
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Eliminate qapi/qmp/types.hMarkus Armbruster1-1/+0
qapi/qmp/types.h is a convenience header to include a number of qapi/qmp/ headers. Since we rarely need all of the headers qapi/qmp/types.h includes, we bypass it most of the time. Most of the places that use it don't need all the headers, either. Include the necessary headers directly, and drop qapi/qmp/types.h. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster2-0/+3
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan1-2/+6
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-06hw/pci*: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis1-2/+2
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. A trailing '.' was removed in hw/pci/pci.c Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-9-armbru@redhat.com>
2018-01-18pci/shpc: Move function to generic header fileYuval Shaia1-11/+2
This function should be declared in generic header file so we can utilize it. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.1 at 2024-08-21 22:22:10 +0000