aboutsummaryrefslogtreecommitdiff
path: root/hw/misc
AgeCommit message (Collapse)AuthorFilesLines
2020-09-14hw/misc: Add NPCM7xx Clock Controller device modelHavard Skinnemoen3-0/+271
Enough functionality to boot the Linux kernel has been implemented. This includes: - Correct power-on reset values so the various clock rates can be accurately calculated. - Clock enables stick around when written. In addition, a best effort attempt to implement SECCNT and CNTR25M was made even though I don't think the kernel needs them. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-3-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc: Add NPCM7xx System Global Control Registers device modelHavard Skinnemoen3-0/+276
Implement a device model for the System Global Control Registers in the NPCM730 and NPCM750 BMC SoCs. This is primarily used to enable SMP boot (the boot ROM spins reading the SCRPAD register) and DDR memory initialization; other registers are best effort for now. The reset values of the MDLR and PWRON registers are determined by the SoC variant (730 vs 750) and board straps respectively. Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-2-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Report unimplemented accesses with qemu_log_mask(UNIMP)Philippe Mathieu-Daudé1-0/+6
Report unimplemented register accesses using qemu_log_mask(UNIMP). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Simplify setting MemoryRegionOps::impl fieldsPhilippe Mathieu-Daudé1-11/+5
This model implementation is designed for 32-bit accesses. We can simplify setting the MemoryRegionOps::impl min/max fields to 32-bit (memory::access_with_adjusted_size() will take care of the 8/16-bit accesses). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Simplify setting MemoryRegionOps::valid fieldsPhilippe Mathieu-Daudé1-16/+5
Per the datasheet (DDI0407 r2p0): "All SCU registers are byte accessible" and are 32-bit aligned. Set MemoryRegionOps::valid min/max fields and simplify the write() handler. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14hw/misc/a9scu: Do not allow invalid CPU countPhilippe Mathieu-Daudé1-5/+13
Per the datasheet (DDI0407 r2p0): "The SCU connects one to four Cortex-A9 processors to the memory system through the AXI interfaces." Change the instance_init() handler to a device_realize() one so we can verify the property is in range, and return an error to the caller if not. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200901144100.116742-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-13Merge remote-tracking branch ↵Peter Maydell6-0/+603
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-11Merge remote-tracking branch ↵Peter Maydell25-103/+158
'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09hw/riscv: Move sifive_test model to hw/miscBin Meng3-0/+104
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_test model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-10-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_otp model to hw/miscBin Meng3-0/+195
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_otp model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-4-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_u_prci model to hw/miscBin Meng3-0/+173
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_u_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-3-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_e_prci model to hw/miscBin Meng3-0/+131
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_e_prci model to hw/misc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09trace-events: Fix attribution of trace points to sourceMarkus Armbruster1-3/+5
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200806141334.3646302-5-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09trace-events: Delete unused trace pointsMarkus Armbruster1-1/+0
Tracked down with the help of scripts/cleanup-trace-events.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20200806141334.3646302-4-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost25-52/+58
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost25-51/+100
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-03Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' ↵Peter Maydell2-60/+74
into staging Various fixes of Aspeed machines : * New Supermicro X11 BMC machine (Erik) * Fixed valid access size on AST2400 SCU * Improved robustness of the ftgmac100 model. * New flash models in m25p80 (Igor) * Fixed reset sequence of SDHCI/eMMC controllers * Improved support of the AST2600 SDMC (Joel) * Couple of SMC cleanups # gpg: Signature made Tue 01 Sep 2020 13:39:20 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20200901: hw: add a number of SPI-flash's of m25p80 family arm: aspeed: add strap define `25HZ` of AST2500 aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller aspeed/sdmc: Simplify calculation of RAM bits aspeed/sdmc: Allow writes to unprotected registers aspeed/sdmc: Perform memory training ftgmac100: Improve software reset ftgmac100: Fix integer overflow in ftgmac100_do_tx() ftgmac100: Check for invalid len and address before doing a DMA transfer ftgmac100: Change interrupt status when a DMA error occurs ftgmac100: Fix interrupt status "Packet moved to RX FIFO" ftgmac100: Fix interrupt status "Packet transmitted on ethernet" ftgmac100: Fix registers that can be read aspeed/sdhci: Fix reset sequence aspeed/smc: Fix max_slaves of the legacy SMC device aspeed/smc: Fix MemoryRegionOps definition hw/arm/aspeed: Add board model for Supermicro X11 BMC aspeed/scu: Fix valid access size on AST2400 m25p80: Add support for n25q512ax3 m25p80: Return the JEDEC ID twice for mx25l25635e Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-02mos6522: Rename QOM macrosEduardo Habkost4-17/+17
Rename the MOS6522_DEVICE_CLASS and MOS6522_DEVICE_GET_CLASS macros to be consistent with the TYPE_MOS6522 and MOS6522 macros. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-46-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02imx_ccm: Rename IMX_GET_CLASS macroEduardo Habkost1-1/+1
Rename it to IMX_CCM_GET_CLASS to be consistent with the existing IMX_CCM and IXM_CCM_CLASS macro. This will make future conversion to OBJECT_DECLARE* easier. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200825192110.3528606-45-ehabkost@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01hw/misc/sbsa_ec : Add an embedded controller for sbsa-refGraeme Gregory2-0/+100
A difference between sbsa platform and the virt platform is PSCI is handled by ARM-TF in the sbsa platform. This means that the PSCI code there needs to communicate some of the platform power changes down to the qemu code for things like shutdown/reset control. Space has been left to extend the EC if we find other use cases in future where ARM-TF and qemu need to communicate. Signed-off-by: Graeme Gregory <graeme@nuviainc.com> Reviewed-by: Leif Lindholm <leif@nuviainc.com> Tested-by: Leif Lindholm <leif@nuviainc.com> Message-id: 20200826141952.136164-2-graeme@nuviainc.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01aspeed/sdmc: Simplify calculation of RAM bitsCédric Le Goater1-54/+25
Changes in commit 533eb415df2e ("arm/aspeed: actually check RAM size") introduced a 'valid_ram_sizes' array which can be used to compute the associated bit field value encoding the RAM size. The field is simply the index of the array. Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-19-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01aspeed/sdmc: Allow writes to unprotected registersJoel Stanley1-0/+27
A subset of registers are not protected by the lock behaviour, so allow unconditionally writing to those. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-18-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01aspeed/sdmc: Perform memory trainingJoel Stanley2-3/+18
This allows qemu to run the "normal" power on reset boot path through u-boot, where the DDR is trained. An enhancement would be to have the SCU bit stick across qemu reboots, but be unset on initial boot. Proper modelling would be to discard all writes to the phy setting regs at offset 0x100 - 0x400 and to model the phy status regs at offset 0x400. The status regs model would only need to account for offets 0x00, 0x50, 0x68 and 0x7c. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: checkpatch fixes ] Message-Id: <20200819100956.2216690-17-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01aspeed/scu: Fix valid access size on AST2400Cédric Le Goater1-3/+4
The read access size of the SCU registers can be 1/2/4 bytes and write is 4 bytes and all Aspeed models would need a .valid.accepts() handler. For the moment, set the min access size to 1 byte to cover both read and write operations on the AST2400 but keep the min access size of the other SoCs to 4 bytes as this is an unusual access size. This fixes support for some old firmware doing 2 bytes reads on the AST2400 SoC. Reported-by: Erik Smit <erik.lucas.smit@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-5-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-08-28Merge remote-tracking branch ↵Peter Maydell1-6/+8
'remotes/pmaydell/tags/pull-target-arm-20200828' into staging target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs # gpg: Signature made Fri 28 Aug 2020 10:23:02 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits) target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Tidy SVE tszimm shift formats target/arm: Split out gen_gvec_ool_zz target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzzp target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Clean up 4-operand predicate expansion target/arm: Merge do_vector2_p into do_mov_p target/arm: Rearrange {sve,fp}_check_access assert target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Split out gen_gvec_fn_zz qemu/int128: Add int128_lshift armsse: Define ARMSSEClass correctly hw/misc/unimp: Display the offset with width of the region size hw/misc/unimp: Display the value with width of the access size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/misc/unimp: Display the offset with width of the region sizePhilippe Mathieu-Daudé1-4/+6
To have a better idea of how big is the region where the offset belongs, display the value with the width of the region size (i.e. a region of 0x1000 bytes uses 0x000 format). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/misc/unimp: Display the value with width of the access sizePhilippe Mathieu-Daudé1-2/+2
To quickly notice the access size, display the value with the width of the access (i.e. 16-bit access is displayed 0x0000, while 8-bit access 0x00). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/misc/unimp: Display value after offsetPhilippe Mathieu-Daudé1-4/+4
To better align the read/write accesses, display the value after the offset (read accesses only display the offset). Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200812190206.31595-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-27auxbus: Move QOM macros to headerEduardo Habkost1-2/+0
This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-38-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21meson: convert hw/miscMarc-André Lureau4-100/+107
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21trace: switch position of headers to what Meson requiresPaolo Bonzini2-0/+2
Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-27hw/misc/aspeed_sdmc: Fix incorrect memory sizePhilippe Mathieu-Daudé1-3/+4
The SDRAM Memory Controller has a 32-bit address bus, thus supports up to 4 GiB of DRAM. There is a signed to unsigned conversion error with the AST2600 maximum memory size: (uint64_t)(2048 << 20) = (uint64_t)(-2147483648) = 0xffffffff40000000 = 16 EiB - 2 GiB Fix by using the IEC suffixes which are usually safer, and add an assertion check to verify the memory is valid. This would have caught this bug: $ qemu-system-arm -M ast2600-evb qemu-system-arm: hw/misc/aspeed_sdmc.c:258: aspeed_sdmc_realize: Assertion `asc->max_ram_size < 4 * GiB' failed. Aborted (core dumped) Fixes: 1550d72679 ("aspeed/sdmc: Add AST2600 support") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21qom: Change object_get_canonical_path_component() not to mallocMarkus Armbruster1-3/+2
object_get_canonical_path_component() returns a malloced copy of a property name on success, null on failure. 19 of its 25 callers immediately free the returned copy. Change object_get_canonical_path_component() to return the property name directly. Since modifying the name would be wrong, adjust the return type to const char *. Drop the free from the 19 callers become simpler, add the g_strdup() to the other six. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200714160202.3121879-4-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-07-11hw/misc: avr: Add limited support for power reduction deviceMichael Rolnik4-0/+122
This is a simple device of just one register, and whenever this register is written to it calls qemu_set_irq function for each of 8 bits/IRQs. It is used to implement AVR Power Reduction. [AM: Remove word 'Atmel' from filenames and all elements of code] Suggested-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Signed-off-by: Michael Rolnik <mrolnik@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [rth: Squash include fix and file rename from f4bug] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org> Message-Id: <20200705140315.260514-22-huth@tuxfamily.org>
2020-07-10error: Avoid error_propagate() after migrate_add_blocker()Markus Armbruster1-3/+1
When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). Do that with this Coccinelle script: @@ expression blocker, err, errp; expression ret; @@ - ret = migrate_add_blocker(blocker, &err); - if (err) { + ret = migrate_add_blocker(blocker, errp); + if (ret < 0) { ... when != err; - error_propagate(errp, err); ... } @@ expression blocker, err, errp; @@ - migrate_add_blocker(blocker, &err); - if (err) { + if (migrate_add_blocker(blocker, errp) < 0) { ... when != err; - error_propagate(errp, err); ... } Double-check @err is not used afterwards. Dereferencing it would be use after free, but checking whether it's null would be legitimate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-43-armbru@redhat.com>
2020-07-10error: Eliminate error_propagate() with Coccinelle, part 1Markus Armbruster7-31/+12
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10error: Avoid unnecessary error_propagate() after error_setg()Markus Armbruster1-2/+1
Replace error_setg(&err, ...); error_propagate(errp, err); by error_setg(errp, ...); Related pattern: if (...) { error_setg(&err, ...); goto out; } ... out: error_propagate(errp, err); return; When all paths to label out are that way, replace by if (...) { error_setg(errp, ...); return; } and delete the label along with the error_propagate(). When we have at most one other path that actually needs to propagate, and maybe one at the end that where propagation is unnecessary, e.g. foo(..., &err); if (err) { goto out; } ... bar(..., &err); out: error_propagate(errp, err); return; move the error_propagate() to where it's needed, like if (...) { foo(..., &err); error_propagate(errp, err); return; } ... bar(..., errp); return; and transform the error_setg() as above. In some places, the transformation results in obviously unnecessary error_propagate(). The next few commits will eliminate them. Bonus: the elimination of gotos will make later patches in this series easier to review. Candidates for conversion tracked down with this Coccinelle script: @@ identifier err, errp; expression list args; @@ - error_setg(&err, args); + error_setg(errp, args); ... when != err error_propagate(errp, err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-34-armbru@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster2-4/+4
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-07-10qom: Don't handle impossible object_property_get_link() failureMarkus Armbruster2-23/+3
Don't handle object_property_get_link() failure that can't happen unless the programmer screwed up, pass &error_abort. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10qapi: Use returned bool to check for failure, Coccinelle partMarkus Armbruster4-8/+4
The previous commit enables conversion of visit_foo(..., &err); if (err) { ... } to if (!visit_foo(..., errp)) { ... } for visitor functions that now return true / false on success / error. Coccinelle script: @@ identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*"; expression list args; typedef Error; Error *err; @@ - fun(args, &err); - if (err) + if (!fun(args, &err)) { ... } A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10macio: Tidy up error handling in macio_newworld_realize()Markus Armbruster1-1/+3
macio_newworld_realize() effectively ignores ns->gpio realization errors, leaking the Error object. Fortunately, macio_gpio_realize() can't actually fail. Tidy up. Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-6-armbru@redhat.com>
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster3-16/+8
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-07-03hw/misc/max111x: Create header file for documentation, TYPE_ macrosPeter Maydell1-23/+1
Create a header file for the hw/misc/max111x device, in the usual modern style for QOM devices: * definition of the TYPE_ constants and macros * definition of the device's state struct so that it can be embedded in other structs if desired * documentation of the interface This allows us to use TYPE_MAX_1111 in the spitz.c code rather than the string "max1111". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
2020-07-03hw/misc/max111x: Use GPIO lines rather than max111x_set_input()Peter Maydell1-7/+9
The max111x ADC device model allows other code to set the level on the 8 ADC inputs using the max111x_set_input() function. Replace this with generic qdev GPIO inputs, which also allow inputs to be set to arbitrary values. Using GPIO lines will make it easier for board code to wire things up, so that if device A wants to set the ADC input it doesn't need to have a direct pointer to the max111x but can just set that value on its output GPIO, which is then wired up by the board to the appropriate max111x input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
2020-07-03hw/misc/max111x: Don't use vmstate_register()Peter Maydell1-2/+1
The max111x is a proper qdev device; we can use dc->vmsd rather than directly calling vmstate_register(). It's possible that this is a migration compat break, but the only boards that use this device are the spitz-family ('akita', 'borzoi', 'spitz', 'terrier'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-8-peter.maydell@linaro.org
2020-07-03hw/misc/max111x: provide QOM properties for setting initial valuesPeter Maydell1-10/+47
Add some QOM properties to the max111x ADC device to allow the initial values to be configured. Currently this is done by board code calling max111x_set_input() after it creates the device, which doesn't work on system reset. This requires us to implement a reset method for this device, so while we're doing that make sure we reset the other parts of the device state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-7-peter.maydell@linaro.org
2020-07-02hw: Fix error API violation around object_property_set_link()Markus Armbruster1-1/+2
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. virtio_gpu_pci_base_realize(), virtio_vga_base_realize(), sparc32_ledma_device_realize(), sparc32_dma_realize(), sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(), macio_realize_ide(), xilinx_enet_realize(), and virtio_iommu_pci_realize() are wrong that way: they reuse the argument they pass to object_property_set_link() for another call. Harmless, because object_property_set_link() can't actually fail for them: it fails when the property doesn't exist, is not settable, or its .check() method fails. Fix by passing &error_abort instead. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-16-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-06-29hw/misc/pca9552: Add missing TypeInfo::class_size fieldPhilippe Mathieu-Daudé1-0/+1
When adding the generic PCA955xClass in commit 736132e455, we forgot to set the class_size field. Fill it now to avoid: (gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf double free or corruption (!prev) Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted. __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 (gdb) where #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007ffff75d8859 in __GI_abort () at abort.c:79 #2 0x00007ffff76433ee in __libc_message (action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n") at ../sysdeps/posix/libc_fatal.c:155 #3 0x00007ffff764b47c in malloc_printerr (str=str@entry=0x7ffff776f690 "double free or corruption (!prev)") at malloc.c:5347 #4 0x00007ffff764d12c in _int_free (av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317 #5 0x0000555555c906c3 in type_initialize_interface (ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259 #6 0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40) at qom/object.c:323 #7 0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40) at qom/object.c:1028 $ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf ==77479== Memcheck, a memory error detector ==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info ==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf ==77479== ==77479== Invalid write of size 2 ==77479== at 0x6D8322: pca9552_class_init (pca9552.c:424) ==77479== by 0x844D1F: type_initialize (object.c:1029) ==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016) ==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x8453A4: object_class_foreach (object.c:1038) ==77479== by 0x8453A4: object_class_get_list (object.c:1095) ==77479== by 0x556194: select_machine (vl.c:2416) ==77479== by 0x556194: qemu_init (vl.c:3828) ==77479== by 0x40AF9C: main (main.c:48) ==77479== Address 0x583f108 is 0 bytes after a block of size 200 alloc'd ==77479== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so) ==77479== by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x844258: type_initialize.part.0 (object.c:306) ==77479== by 0x844D1F: type_initialize (object.c:1029) ==77479== by 0x844D1F: object_class_foreach_tramp (object.c:1016) ==77479== by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2) ==77479== by 0x8453A4: object_class_foreach (object.c:1038) ==77479== by 0x8453A4: object_class_get_list (object.c:1095) ==77479== by 0x556194: select_machine (vl.c:2416) ==77479== by 0x556194: qemu_init (vl.c:3828) ==77479== by 0x40AF9C: main (main.c:48) Fixes: 736132e455 ("hw/misc/pca9552: Add generic PCA955xClass") Reported-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Jean-Christophe DUBOIS <jcd@tribudubois.net> Message-id: 20200629074704.23028-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26hw/misc/pca9552: Model qdev output GPIOsPhilippe Mathieu-Daudé1-0/+6
The PCA9552 has 16 GPIOs which can be used as input, output or PWM mode. QEMU models the output GPIO with the qemu_irq type. Let the device expose the 16 GPIOs to allow us to later connect LEDs to these outputs. Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200623072723.6324-10-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26hw/misc/pca9552: Trace GPIO change eventsPhilippe Mathieu-Daudé2-0/+16
Emit a trace event when a GPIO change its state. Example booting obmc-phosphor-image: $ qemu-system-arm -M witherspoon-bmc -trace pca955x_gpio_change 1592690552.687372:pca955x_gpio_change pca1 GPIO id:0 status: 0 -> 1 1592690552.690169:pca955x_gpio_change pca1 GPIO id:1 status: 0 -> 1 1592690552.691673:pca955x_gpio_change pca1 GPIO id:2 status: 0 -> 1 1592690552.696886:pca955x_gpio_change pca1 GPIO id:3 status: 0 -> 1 1592690552.698614:pca955x_gpio_change pca1 GPIO id:13 status: 0 -> 1 1592690552.699833:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1 1592690552.700842:pca955x_gpio_change pca1 GPIO id:15 status: 0 -> 1 1592690683.841921:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0 1592690683.861660:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1 1592690684.371460:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0 1592690684.882115:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1 1592690685.391411:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0 1592690685.901391:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1 1592690686.411678:pca955x_gpio_change pca1 GPIO id:14 status: 1 -> 0 1592690686.921279:pca955x_gpio_change pca1 GPIO id:14 status: 0 -> 1 We notice the GPIO #14 (front-power LED) starts to blink. This LED is described in the witherspoon device-tree [*]: front-power { retain-state-shutdown; default-state = "keep"; gpios = <&pca0 14 GPIO_ACTIVE_LOW>; }; [*] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts?id=b1f9be9392f0#n140 Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200623072723.6324-9-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2024-10-14 04:52:14 +0000