aboutsummaryrefslogtreecommitdiff
path: root/hw/misc/trace-events
AgeCommit message (Collapse)AuthorFilesLines
2025-01-13hw/misc/imx6_src: Convert DPRINTF() to trace eventsBernhard Beschow1-0/+6
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20250108092538.11474-14-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-12-31hw/misc/ivshmem-flat: Add ivshmem-flat deviceGustavo Romero1-0/+16
Add a new device, ivshmem-flat, which is similar to the ivshmem PCI but does not require a PCI bus. It's meant to be used on machines like those with Cortex-M MCUs, which usually lack a PCI/PCIe bus, e.g. lm3s6965evb and mps2-an385. The device currently only supports the sysbus bus. The new device, just like the ivshmem PCI device, supports both peer notification via hardware interrupts and shared memory. The device shared memory size can be set using the 'shmem-size' option and it defaults to 4 MiB, which is the default size of shmem allocated by the ivshmem server. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1134 Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> [PMD: Rebased updating Property and using DEFINE_TYPES macro] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20241216141818.111255-2-gustavo.romero@linaro.org>
2024-10-15hw/misc/stm32_rcc: Implement RCC device for STM32F4 SoCsRomán Cárdenas Rodríguez1-0/+6
Generic RCC class for STM32 devices. It can be used for most of the STM32 chips. Note that it only implements enable and reset capabilities. Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com> [PMM: tweaked commit message, added MAINTAINERS lines] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-06-16aspeed/scu: Add AST2700 supportJamin Lin1-0/+4
AST2700 have two SCU controllers which are SCU and SCUIO. Both SCU and SCUIO registers are not compatible previous SOCs , introduces new registers and adds ast2700 scu, sucio class init handler. The pclk divider selection of SCUIO is defined in SCUIO280[20:18] and the pclk divider selection of SCU is defined in SCU280[25:23]. Both of them are not compatible AST2600 SOCs, adds a get_apb_freq function and trace-event for AST2700 SCU and SCUIO. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [clg: Fixed spelling : Unhandeled -> Unhandled ]
2024-06-16aspeed/sli: Add AST2700 supportJamin Lin1-0/+7
AST2700 SLI engine is designed to accelerate the throughput between cross-die connections. It have CPU_SLI at CPU die and IO_SLI at IO die. Introduce dummy AST2700 SLI and SLIIO models. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2024-03-25misc/pca955*: Move models under hw/gpioCédric Le Goater1-4/+0
The PCA9552 and PCA9554 devices are both I2C GPIO controllers and the PCA9552 also can drive LEDs. Do all the necessary adjustments to move the models under hw/gpio. Cc: Glenn Miles <milesg@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20240325134833.1484265-1-clg@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal PLL Clock objectArnaud Minier1-0/+5
This object represents the PLLs and their channels. The PLLs allow for a more fine-grained control of the clocks frequency. The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer objectArnaud Minier1-0/+5
This object is used to represent every multiplexer in the clock tree as well as every clock output, every presecaler, frequency multiplier, etc. This allows to use a generic approach for every component of the clock tree (except the PLLs). The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeletonArnaud Minier1-0/+4
Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-15hw/misc: Implement STM32L4x5 SYSCFGInès Varhol1-0/+6
Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240109194438.70934-2-ines.varhol@telecom-paris.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-15hw/misc: Implement STM32L4x5 EXTIInès Varhol1-0/+5
Although very similar to the STM32F4xx EXTI, STM32L4x5 EXTI generates more than 32 event/interrupt requests and thus uses more registers than STM32F4xx EXTI which generates 23 event/interrupt requests. Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240109160658.311932-2-ines.varhol@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-12-19fsl-imx: add simple RTC emulation for i.MX6 and i.MX7 boardsNikita Ostrenkov1-2/+2
Signed-off-by: Nikita Ostrenkov <n.ostrenkov@gmail.com> Message-id: 20231216133408.2884-1-n.ostrenkov@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-02hw/misc/imx6_ccm: Convert DPRINTF to trace eventsBernhard Beschow1-0/+15
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231028122415.14869-5-shentey@gmail.com [PMM: Add "Hz" unit indicator to frequency traces] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-11-02hw/misc/imx7_snvs: Trace MMIO accessBernhard Beschow1-0/+4
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20231028122415.14869-4-shentey@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-10-06mac_via: workaround NetBSD ADB bus enumeration issueMark Cave-Ayland1-0/+1
NetBSD assumes it can send its first ADB command after sending the ADB_BUSRESET command in ADB_STATE_NEW without changing the state back to ADB_STATE_IDLE first as detailed in the ADB protocol. Add a workaround to detect this condition at the start of ADB enumeration and send the next command written to SR after a ADB_BUSRESET onto the bus regardless, even if we don't detect a state transition to ADB_STATE_NEW. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20231004083806.757242-16-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-10-06mac_via: work around underflow in TimeDBRA timing loop in SETUPTIMEKMark Cave-Ayland1-0/+1
The MacOS toolbox ROM calculates the number of branches that can be executed per millisecond as part of its timer calibration. Since modern hosts are considerably quicker than original hardware, the negative counter reaches zero before the calibration completes leading to division by zero later in CALCULATESLOD. Instead of trying to fudge the timing loop (which won't work for TimeDBRA/TimeSCCDB anyhow), use the pattern of access to the VIA1 registers to detect when SETUPTIMEK has finished executing and write some well-known good timer values to TimeDBRA and TimeSCCDB taken from real hardware with a suitable scaling factor. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-ID: <20231004083806.757242-15-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-10-06q800: add IOSB subsystemMark Cave-Ayland1-0/+4
It is needed because it defines the BIOSConfig area. Co-developed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <20231004083806.757242-6-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-10-06q800: add djMEMC memory controllerMark Cave-Ayland1-0/+4
The djMEMC controller is used to store information related to the physical memory configuration. Co-developed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20231004083806.757242-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2023-09-21hw/other: spelling fixesMichael Tokarev1-1/+1
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2023-08-31Add i.MX7 SRC device implementationJean-Christophe Dubois1-0/+4
The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw: arm: allwinner-sramc: Add SRAM Controller support for R40qianfan Zhao1-0/+4
Only a few important registers are added, especially the SRAM_VER register. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/arm/allwinner-r40: add SDRAM controller deviceqianfan Zhao1-0/+14
Types of memory that the SDRAM controller supports are DDR2/DDR3 and capacities of up to 2GiB. This commit adds emulation support of the Allwinner R40 SDRAM controller. This driver only support 256M, 512M and 1024M memory now. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-06-06hw/misc: Rename axp209 to axp22x and add support AXP221 PMUqianfan Zhao1-4/+4
This patch adds minimal support for AXP-221 PMU and connect it to bananapi M2U board. Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-12hw/misc: AXP209 PMU EmulationStrahinja Jankovic1-0/+5
This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-08-08hw/misc/grlib_ahb_apb_pnp: Support 8 and 16 bit accessesPeter Maydell1-2/+2
In real hardware, the APB and AHB PNP data tables can be accessed with byte and halfword reads as well as word reads. Our implementation currently only handles word reads. Add support for the 8 and 16 bit accesses. Note that we only need to handle aligned accesses -- unaligned accesses should continue to trap, as happens on hardware. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1132 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Message-Id: <20220802131925.3380923-1-peter.maydell@linaro.org> Tested-by: Tomasz Martyniak <gitlab.com/tom4r> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-06-30hw/misc/aspeed: Add PECI controllerPeter Delevoryas1-0/+5
This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30aspeed/scu: Add trace events for read opsCédric Le Goater1-0/+1
Reviewed-by: Peter Delevoryas <pdel@fb.com> Message-Id: <20220628154740.1117349-2-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-05-08lasi: move from hw/hppa to hw/miscMark Cave-Ayland1-0/+5
Move the LASI device implementation from hw/hppa to hw/misc so that it is located with all the other miscellaneous devices. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Helge Deller <deller@gmx.de> Message-Id: <20220504092600.10048-43-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-24hw: Fix misleading hexadecimal formatPhilippe Mathieu-Daudé1-2/+2
"0x%u" format is very misleading, replace by "0x%x". Found running: $ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/ Inspired-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-03-09mos6522: add register names to register read/write trace eventsMark Cave-Ayland1-2/+2
This helps to follow how the guest is programming the mos6522 when debugging. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20220305150957.5053-8-mark.cave-ayland@ilande.co.uk> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-02-26aspeed/sdmc: Add trace eventsCédric Le Goater1-0/+4
This is useful to analyze changes in the U-Boot RAM driver when SDRAM training is performed. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-01-20hw/misc/aspeed_i3c.c: Introduce a dummy AST2600 I3C model.Troy Lee1-0/+6
Aspeed 2600 SDK enables I3C support by default. The I3C driver will try to reset the device controller and set it up through device address table register. This dummy model responds to these registers with default values as listed in the ast2600v10 datasheet chapter 54.2. This avoids a guest machine kernel panic due to referencing an invalid kernel address if the device address table register isn't set correctly. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Reviewed-by: Graeme Gregory <quic_ggregory@quicinc.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Graeme Gregory <quic_ggregory@quicinc.com> Message-id: 20220111084546.4145785-2-troy_lee@aspeedtech.com [PMM: tidied commit message; fixed format strings] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-10-20mac_via: add GPIO for A/UX modeMark Cave-Ayland1-0/+1
Add a new auxmode GPIO that is updated when port B bit 6 is changed indicating whether the hardware is configured for A/UX mode. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20211020134131.4392-5-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella1-1/+1
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster1-10/+0
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-03-18Merge remote-tracking branch 'remotes/vivier/tags/q800-for-6.0-pull-request' ↵Peter Maydell1-2/+2
into staging q800 pull request 20210316 Several fixes for mac_via needed for future support of MacOS ROM # gpg: Signature made Tue 16 Mar 2021 21:14:42 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/q800-for-6.0-pull-request: mac_via: remove VIA1 timer optimisations mac_via: fix 60Hz VIA1 timer interval mac_via: rename VBL timer to 60Hz timer mac_via: don't re-inject ADB response when switching to IDLE state mac_via: allow long accesses to VIA registers mac_via: fix up adb_via_receive() trace events mac_via: switch rtc pram trace-events to use hex rather than decimal for addresses Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16mac_via: switch rtc pram trace-events to use hex rather than decimal for ↵Mark Cave-Ayland1-2/+2
addresses Since all the documentation uses the hex offsets, this makes it much easier to see what is going on. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20210311100505.22596-2-mark.cave-ayland@ilande.co.uk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-15m68k: add a system controllerLaurent Vivier1-0/+7
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu1-0/+8
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell1-1/+1
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-09Various spelling fixesMichael Tokarev1-1/+1
An assorted set of spelling fixes in various places. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-08hw/misc/sse-cpu-pwrctrl: Implement SSE-300 CPU<N>_PWRCTRL register blockPeter Maydell1-0/+4
The SSE-300 has a new register block CPU<N>_PWRCTRL. There is one instance of this per CPU in the system (so just one for the SSE-300), and as well as the usual CIDR/PIDR ID registers it has just one register, CPUPWRCFG. This register allows the guest to configure behaviour of the system in power-down and deep-sleep states. Since QEMU does not model those, we make the register a dummy reads-as-written implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210219144617.4782-21-peter.maydell@linaro.org
2021-01-12hw/misc: Add a PWM module for NPCM7XXHao Wu1-0/+6
The PWM module is part of NPCM7XX module. Each NPCM7XX module has two identical PWM modules. Each module contains 4 PWM entries. Each PWM has two outputs: frequency and duty_cycle. Both are computed using inputs from software side. This module does not model detail pulse signals since it is expensive. It also does not model interrupts and watchdogs that are dependant on the detail models. The interfaces for these are left in the module so that anyone in need for these functionalities can implement on their own. The user can read the duty cycle and frequency using qom-get command. Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210108190945.949196-5-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-29Merge remote-tracking branch ↵Peter Maydell1-0/+9
'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging target-arm queue: * raspi: add model of cprman clock manager * sbsa-ref: add an SBSA generic watchdog device * arm/trace: Fix hex printing * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+ * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support * hw/arm: fix min_cpus for xlnx-versal-virt platform * hw/arm/highbank: Silence warnings about missing fallthrough statements * linux-user: Support Aarch64 BTI * Armv7M systick: fix corner case bugs by rewriting to use ptimer # gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits) hw/timer/armv7m_systick: Rewrite to use ptimers hw/core/ptimer: Support ptimer being disabled by timer callback hw/arm/sbsa-ref: add SBSA watchdog device hw/watchdog: Implement SBSA watchdog device hw/arm/bcm2835_peripherals: connect the UART clock hw/char/pl011: add a clock input hw/misc/bcm2835_cprman: add sane reset values to the registers hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer hw/misc/bcm2835_cprman: implement clock mux behaviour hw/misc/bcm2835_cprman: add a clock mux skeleton implementation hw/misc/bcm2835_cprman: implement PLL channels behaviour hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation hw/misc/bcm2835_cprman: implement PLLs behaviour hw/misc/bcm2835_cprman: add a PLL skeleton implementation hw/arm/raspi: add a skeleton implementation of the CPRMAN hw/arm/raspi: fix CPRMAN base address hw/core/clock: trace clock values in Hz instead of ns hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro arm/trace: Fix hex printing hw/arm/raspi: Add the Raspberry Pi 3 model A+ ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/arm/raspi: add a skeleton implementation of the CPRMANLuc Michel1-0/+5
The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a main oscillator, and several sub-components (PLLs, multiplexers, ...) to generate the BCM2835 clock tree. This commit adds a skeleton of the CPRMAN, with a dummy register read/write implementation. It embeds the main oscillator (xosc) from which all the clocks will be derived. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Luc Michel <luc@lmichel.fr> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27hw/misc: Add npcm7xx random number generatorHavard Skinnemoen1-0/+4
The RNG module returns a byte of randomness when the Data Valid bit is set. This implementation ignores the prescaler setting, and loads a new value into RNGD every time RNGCS is read while the RNG is enabled and random data is available. A qtest featuring some simple randomness tests is included. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-26hw/misc/mps2-scc: Use the LED devicePhilippe Mathieu-Daudé1-1/+0
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 8 LEDs connected to the MCC. This replaces the 'mps2_scc_leds' trace events by the generic 'led_set_intensity' event. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-7-f4bug@amsat.org>
2020-10-26hw/misc/mps2-fpgaio: Use the LED devicePhilippe Mathieu-Daudé1-1/+0
Per the 'ARM MPS2 and MPS2+ FPGA Prototyping Boards Technical Reference Manual' (100112_0200_07_en): 2.1 Overview of the MPS2 and MPS2+ hardware The MPS2 and MPS2+ FPGA Prototyping Boards contain the following components and interfaces: * User switches and user LEDs: - Two green LEDs and two push buttons that connect to the FPGA. - Eight green LEDs and one 8-way dip switch that connect to the MCC. Add the 2 LEDs connected to the FPGA. This replaces the 'mps2_fpgaio_leds' trace events by the generic 'led_set_intensity' event. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-Id: <20200912134041.946260-6-f4bug@amsat.org>
2020-10-26hw/misc/led: Emit a trace event when LED intensity has changedPhilippe Mathieu-Daudé1-0/+1
Track the LED intensity, and emit a trace event when it changes. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200912134041.946260-4-f4bug@amsat.org>
2020-10-26hw/misc/led: Add a LED devicePhilippe Mathieu-Daudé1-0/+3
Add a LED device which can be connected to a GPIO output. They can also be dimmed with PWM devices. For now we do not implement the dimmed mode, but in preparation of a future implementation, we start using the LED intensity. LEDs are limited to a fixed set of colors. Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200912134041.946260-2-f4bug@amsat.org>
generated by cgit v1.1 at 2025-01-30 23:34:02 +0000