aboutsummaryrefslogtreecommitdiff
path: root/hw/block/vhost-user-blk.c
AgeCommit message (Collapse)AuthorFilesLines
2024-12-21Merge tag 'exec-20241220' of https://github.com/philmd/qemu into stagingStefan Hajnoczi1-2/+2
Accel & Exec patch queue - Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander) - Add '-d invalid_mem' logging option (Zoltan) - Create QOM containers explicitly (Peter) - Rename sysemu/ -> system/ (Philippe) - Re-orderning of include/exec/ headers (Philippe) Move a lot of declarations from these legacy mixed bag headers: . "exec/cpu-all.h" . "exec/cpu-common.h" . "exec/cpu-defs.h" . "exec/exec-all.h" . "exec/translate-all" to these more specific ones: . "exec/page-protection.h" . "exec/translation-block.h" . "user/cpu_loop.h" . "user/guest-host.h" . "user/page-protection.h" # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t # wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt # KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K # A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8 # 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe/// # 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r # xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl # VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay # ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP # 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd # +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6 # x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo= # =cjz8 # -----END PGP SIGNATURE----- # gpg: Signature made Fri 20 Dec 2024 11:45:20 EST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits) util/qemu-timer: fix indentation meson: Do not define CONFIG_DEVICES on user emulation system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header system/numa: Remove unnecessary 'exec/cpu-common.h' header hw/xen: Remove unnecessary 'exec/cpu-common.h' header target/mips: Drop left-over comment about Jazz machine target/mips: Remove tswap() calls in semihosting uhi_fstat_cb() target/xtensa: Remove tswap() calls in semihosting simcall() helper accel/tcg: Un-inline translator_is_same_page() accel/tcg: Include missing 'exec/translation-block.h' header accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h' accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h' qemu/coroutine: Include missing 'qemu/atomic.h' header exec/translation-block: Include missing 'qemu/atomic.h' header accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h' exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined target/sparc: Move sparc_restore_state_to_opc() to cpu.c target/sparc: Uninline cpu_get_tb_cpu_state() target/loongarch: Declare loongarch_cpu_dump_state() locally user: Move various declarations out of 'exec/exec-all.h' ... Conflicts: hw/char/riscv_htif.c hw/intc/riscv_aplic.c target/s390x/cpu.c Apply sysemu header path changes to not in the pull request. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2024-12-20include: Rename sysemu/ -> system/Philippe Mathieu-Daudé1-2/+2
Headers in include/sysemu/ are not only related to system *emulation*, they are also used by virtualization. Rename as system/ which is clearer. Files renamed manually then mechanical change using sed tool. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Message-Id: <20241203172445.28576-1-philmd@linaro.org>
2024-12-19include/hw/qdev-properties: Remove DEFINE_PROP_END_OF_LISTRichard Henderson1-1/+0
Now that all of the Property arrays are counted, we can remove the terminator object from each array. Update the assertions in device_class_set_props to match. With struct Property being 88 bytes, this was a rather large form of terminator. Saves 30k from qemu-system-aarch64. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Lei Yang <leiyang@redhat.com> Link: https://lore.kernel.org/r/20241218134251.4724-21-richard.henderson@linaro.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-12-15hw/block: Constify all PropertyRichard Henderson1-1/+1
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-11-04qapi: introduce device-sync-configVladimir Sementsov-Ogievskiy1-0/+1
Add command to sync config from vhost-user backend to the device. It may be helpful when VHOST_USER_SLAVE_CONFIG_CHANGE_MSG failed or not triggered interrupt to the guest or just not available (not supported by vhost-user server). Command result is racy if allow it during migration. Let's not allow that. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Raphael Norwitz <raphael@enfabrica.net> Message-Id: <20240920094936.450987-4-vsementsov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-11-04vhost-user-blk: split vhost_user_blk_sync_config()Vladimir Sementsov-Ogievskiy1-7/+19
Split vhost_user_blk_sync_config() out from vhost_user_blk_handle_config_change(), to be reused in the following commit. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Acked-by: Raphael Norwitz <raphael@enfabrica.net> Message-Id: <20240920094936.450987-3-vsementsov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2024-07-21vhost,vhost-user: Add VIRTIO_F_IN_ORDER to vhost feature bitsJonah Palmer1-0/+1
Add support for the VIRTIO_F_IN_ORDER feature across a variety of vhost devices. The inclusion of VIRTIO_F_IN_ORDER in the feature bits arrays for these devices ensures that the backend is capable of offering and providing support for this feature, and that it can be disabled if the backend does not support it. Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <20240710125522.4168043-6-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-01vhost-user: fix lost reconnect againLi Feng1-1/+2
When the vhost-user is reconnecting to the backend, and if the vhost-user fails at the get_features in vhost_dev_init(), then the reconnect will fail and it will not be retriggered forever. The reason is: When the vhost-user fail at get_features, the vhost_dev_cleanup will be called immediately. vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'. The reconnect path is: vhost_user_blk_event vhost_user_async_close(.. vhost_user_blk_disconnect ..) qemu_chr_fe_set_handlers <----- clear the notifier callback schedule vhost_user_async_close_bh The vhost->vdev is null, so the vhost_user_blk_disconnect will not be called, then the event fd callback will not be reinstalled. We need to ensure that even if vhost_dev_init initialization fails, the event handler still needs to be reinstalled when s->connected is false. All vhost-user devices have this issue, including vhost-user-blk/scsi. Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling") Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20240516025753.130171-3-fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael@enfabrica.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-01Revert "vhost-user: fix lost reconnect"Li Feng1-1/+1
This reverts commit f02a4b8e6431598612466f76aac64ab492849abf. Since the current patch cannot completely fix the lost reconnect problem, there is a scenario that is not considered: - When the virtio-blk driver is removed from the guest os, s->connected has no chance to be set to false, resulting in subsequent reconnection not being executed. The next patch will completely fix this issue with a better approach. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20240516025753.130171-2-fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael@enfabrica.net> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-01vhost/vhost-user: Add VIRTIO_F_NOTIFICATION_DATA to vhost feature bitsJonah Palmer1-0/+1
Add support for the VIRTIO_F_NOTIFICATION_DATA feature across a variety of vhost devices. The inclusion of VIRTIO_F_NOTIFICATION_DATA in the feature bits arrays for these devices ensures that the backend is capable of offering and providing support for this feature, and that it can be disabled if the backend does not support it. Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <20240315165557.26942-6-jonah.palmer@oracle.com> Acked-by: Srujana Challa <schalla@marvell.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-09vhost-user-blk: simplify and fix vhost_user_blk_handle_config_changeVladimir Sementsov-Ogievskiy1-8/+3
Let's not care about what was changed and update the whole config, reasons: 1. config->geometry should be updated together with capacity, so we fix a bug. 2. Vhost-user protocol doesn't say anything about config change limitation. Silent ignore of changes doesn't seem to be correct. 3. vhost-user-vsock reads the whole config 4. on realize we don't do any checks on retrieved config, so no reason to care here Comment "valid for resize only" exists since introduction the whole hw/block/vhost-user-blk.c in commit 00343e4b54ba0685e9ebe928ec5713b0cf7f1d1c "vhost-user-blk: introduce a new vhost-user-blk host device", seems it was just an extra limitation. Also, let's notify guest unconditionally: 1. So does vhost-user-vsock 2. We are going to reuse the functionality in new cases when we do want to notify the guest unconditionally. So, no reason to create extra branches in the logic. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20240329183758.3360733-2-vsementsov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-29hw/block: Constify VMStateRichard Henderson1-1/+1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-25-richard.henderson@linaro.org>
2023-12-02vhost-user: fix the reconnect errorLi Feng1-5/+3
If the error occurs in vhost_dev_init, the value of s->connected is set to true in advance, and there is no chance to enter this function execution again in the future. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20231123055431.217792-2-fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-23Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Stefan Hajnoczi1-4/+2
into staging virtio,pc,pci: features, cleanups infrastructure for vhost-vdpa shadow work piix south bridge rework reconnect for vhost-user-scsi dummy ACPI QTG DSM for cxl tests, cleanups, fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU # pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd # 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT # ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV # 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa # zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg= # =ILek # -----END PGP SIGNATURE----- # gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits) intel-iommu: Report interrupt remapping faults, fix return value MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section vhost-user: Fix protocol feature bit conflict tests/acpi: Update DSDT.cxl with QTG DSM hw/cxl: Add QTG _DSM support for ACPI0017 device tests/acpi: Allow update of DSDT.cxl hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range vhost-user: fix lost reconnect vhost-user-scsi: start vhost when guest kicks vhost-user-scsi: support reconnect to backend vhost: move and rename the conn retry times vhost-user-common: send get_inflight_fd once hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine hw/isa/piix: Implement multi-process QEMU support also for PIIX4 hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4 hw/isa/piix: Rename functions to be shared for PCI interrupt triggering hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4 hw/isa/piix: Share PIIX3's base class with PIIX4 hw/isa/piix: Harmonize names of reset control memory regions ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2023-10-22vhost-user: fix lost reconnectLi Feng1-1/+1
When the vhost-user is reconnecting to the backend, and if the vhost-user fails at the get_features in vhost_dev_init(), then the reconnect will fail and it will not be retriggered forever. The reason is: When the vhost-user fails at get_features, the vhost_dev_cleanup will be called immediately. vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'. The reconnect path is: vhost_user_blk_event vhost_user_async_close(.. vhost_user_blk_disconnect ..) qemu_chr_fe_set_handlers <----- clear the notifier callback schedule vhost_user_async_close_bh The vhost->vdev is null, so the vhost_user_blk_disconnect will not be called, then the event fd callback will not be reinstalled. All vhost-user devices have this issue, including vhost-user-blk/scsi. With this patch, if the vdev->vdev is null, the fd callback will still be reinstalled. Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling") Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20231009044735.941655-6-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-22vhost: move and rename the conn retry timesLi Feng1-3/+1
Multiple devices need this macro, move it to a common header. Signed-off-by: Li Feng <fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20231009044735.941655-3-fengli@smartx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-10-19hw/block/vhost-user-blk: Use DEVICE() / VIRTIO_DEVICE() macrosPhilippe Mathieu-Daudé1-2/+2
Access QOM parent with the proper QOM [VIRTIO_]DEVICE() macros. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20231017140150.44995-3-philmd@linaro.org>
2023-06-26vhost-user: fully use new backend/frontend namingManos Pitsidianakis1-1/+1
Slave/master nomenclature was replaced with backend/frontend in commit 1fc19b65279a ("vhost-user: Adopt new backend naming") This patch replaces all remaining uses of master and slave in the codebase. Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2022-12-01hw/virtio: generalise CHR_EVENT_CLOSED handlingAlex Bennée1-36/+5
..and use for both virtio-user-blk and virtio-user-gpio. This avoids the circular close by deferring shutdown due to disconnection until a later point. virtio-user-blk already had this mechanism in place so generalise it as a vhost-user helper function and use for both blk and gpio devices. While we are at it we also fix up vhost-user-gpio to re-establish the event handler after close down so we can reconnect later. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20221130112439.2527228-5-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-12-01vhost: enable vrings in vhost_dev_start() for vhost-user devicesStefano Garzarella1-2/+2
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features") properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user backend, but we forgot to enable vrings as specified in docs/interop/vhost-user.rst: If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the ring starts directly in the enabled state. If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is initialized in a disabled state and is enabled by ``VHOST_USER_SET_VRING_ENABLE`` with parameter 1. Some vhost-user front-ends already did this by calling vhost_ops.vhost_set_vring_enable() directly: - backends/cryptodev-vhost.c - hw/net/virtio-net.c - hw/virtio/vhost-user-gpio.c But most didn't do that, so we would leave the vrings disabled and some backends would not work. We observed this issue with the rust version of virtiofsd [1], which uses the event loop [2] provided by the vhost-user-backend crate where requests are not processed if vring is not enabled. Let's fix this issue by enabling the vrings in vhost_dev_start() for vhost-user front-ends that don't already do this directly. Same thing also in vhost_dev_stop() where we disable vrings. [1] https://gitlab.com/virtio-fs/virtiofsd [2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217 Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features") Reported-by: German Maglione <gmaglione@redhat.com> Tested-by: German Maglione <gmaglione@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20221123131630.52020-1-sgarzare@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-11-22vhost: mask VIRTIO_F_RING_RESET for vhost and vhost-user devicesStefano Garzarella1-0/+1
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support") enabled VIRTIO_F_RING_RESET by default for all virtio devices. This feature is not currently emulated by QEMU, so for vhost and vhost-user devices we need to make sure it is supported by the offloaded device emulation (in-kernel or in another process). To do this we need to add VIRTIO_F_RING_RESET to the features bitmap passed to vhost_get_features(). This way it will be masked if the device does not support it. This issue was initially discovered with vhost-vsock and vhost-user-vsock, and then also tested with vhost-user-rng which confirmed the same issue. They fail when sending features through VHOST_SET_FEATURES ioctl or VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated by the guest (Linux >= v6.0), but not supported by the device. Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318 Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20221121101101.29400-1-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-11-07hw/virtio: introduce virtio_device_should_startAlex Bennée1-5/+1
The previous fix to virtio_device_started revealed a problem in its use by both the core and the device code. The core code should be able to handle the device "starting" while the VM isn't running to handle the restoration of migration state. To solve this duel use introduce a new helper for use by the vhost-user backends who all use it to feed a should_start variable. We can also pick up a change vhost_user_blk_set_status while we are at it which follows the same pattern. Fixes: 9f6bcfd99f (hw/virtio: move vm_running check to virtio_device_started) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Message-Id: <20221107121407.1010913-1-alex.bennee@linaro.org>
2022-11-07vhost: Change the sequence of device startYajun Wu1-7/+11
This patch is part of adding vhost-user vhost_dev_start support. The motivation is to improve backend configuration speed and reduce live migration VM downtime. Moving the device start routines after finishing all the necessary device and VQ configuration, further aligning to the virtio specification for "device initialization sequence". Following patch will add vhost-user vhost_dev_start support. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Acked-by: Parav Pandit <parav@nvidia.com> Message-Id: <20221017064452.1226514-2-yajunw@nvidia.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-27vhost-user-blk: fix the resize crashLi Feng1-0/+4
If the os is not installed and doesn't have the virtio guest driver, the vhost dev isn't started, so the dev->vdev is NULL. Reproduce: mount a Win 2019 iso, go into the install ui, then resize the virtio-blk device, qemu crash. Signed-off-by: Li Feng <fengli@smartx.com> Message-Id: <20220919121816.3252223-1-fengli@smartx.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-10-07vhost-user-blk: dynamically resize config space based on featuresDaniil Tatianin1-7/+10
Make vhost-user-blk backwards compatible when migrating from older VMs running with modern features turned off, the same way it was done for virtio-blk in 20764be0421c ("virtio-blk: set config size depending on the features enabled") It's currently impossible to migrate from an older VM with vhost-user-blk (with disable-legacy=off) because of errors like this: qemu-system-x86_64: get_pci_config_device: Bad config data: i=0x10 read: 41 device: 1 cmask: ff wmask: 80 w1cmask:0 qemu-system-x86_64: Failed to load PCIDevice:config qemu-system-x86_64: Failed to load virtio-blk:virtio qemu-system-x86_64: error while loading state for instance 0x0 of device '0000:00:05.0:00.0:02.0/virtio-blk' qemu-system-x86_64: load of migration failed: Invalid argument This is caused by the newer (destination) VM requiring a bigger BAR0 alignment because it has to cover a bigger configuration space, which isn't actually needed since those additional config fields are not active (write-zeroes/discard). Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-6-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07vhost-user-blk: make 'config_wce' part of 'host_features'Daniil Tatianin1-4/+2
No reason to have this be a separate field. This also makes it more akin to what the virtio-blk device does. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-5-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07vhost-user-blk: make it possible to disable write-zeroes/discardDaniil Tatianin1-2/+4
It is useful to have the ability to disable these features for compatibility with older VMs that don't have these implemented. Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20220906073111.353245-4-d-tatianin@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07hw/virtio: move vhd->started check into helper and add FIXMEAlex Bennée1-2/+8
The `started` field is manipulated internally within the vhost code except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck dev state in the vhost_migration_log routine). Mark that as a FIXME because it introduces a potential race. I think the referenced fix should be tracking its state locally. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
2022-06-09hw/vhost-user-scsi|blk: set `supports_config` flag correctlyChangpeng Liu1-0/+1
Currently vhost-user-scsi driver doesn't allow to change the configuration space of virtio_scsi, while vhost-user-blk support that, so here we set the flag in vhost-user-blk driver and unset it in vhost-user-scsi. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
2022-05-16virtio: add vhost support for virtio devicesJonah Palmer1-0/+7
This patch adds a get_vhost() callback function for VirtIODevices that returns the device's corresponding vhost_dev structure, if the vhost device is running. This patch also adds a vhost_started flag for VirtIODevices. Previously, a VirtIODevice wouldn't be able to tell if its corresponding vhost device was active or not. Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16virtio: drop name parameter for virtio_init()Jonah Palmer1-1/+1
This patch drops the name parameter for the virtio_init function. The pair between the numeric device ID and the string device ID (name) of a virtio device already exists, but not in a way that lets us map between them. This patch lets us do this and removes the need for the name parameter in the virtio_init function. Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com> Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-07hw/vhost-user-blk: turn on VIRTIO_BLK_F_SIZE_MAX feature for virtio blk deviceAndy Pei1-0/+1
Turn on pre-defined feature VIRTIO_BLK_F_SIZE_MAX for virtio blk device to avoid guest DMA request sizes which are too large for hardware spec. Signed-off-by: Andy Pei <andy.pei@intel.com> Message-Id: <1641202092-149677-1-git-send-email-andy.pei@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2022-01-07vhost-user-blk: propagate error return from generic vhostRoman Kagan1-1/+1
Fix the only callsite that doesn't propagate the error code from the generic vhost code. Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Message-Id: <20211111153354.18807-11-rvkagan@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2022-01-07vhost-user-blk: reconnect on any error during realizeRoman Kagan1-1/+1
vhost-user-blk realize only attempts to reconnect if the previous connection attempt failed on "a problem with the connection and not an error related to the content (which would fail again the same way in the next attempt)". However this distinction is very subtle, and may be inadvertently broken if the code changes somewhere deep down the stack and a new error gets propagated up to here. OTOH now that the number of reconnection attempts is limited it seems harmless to try reconnecting on any error. So relax the condition of whether to retry connecting to check for any error. This patch amends a527e312b5 "vhost-user-blk: Implement reconnection during realize". Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru> Message-Id: <20211111153354.18807-2-rvkagan@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-06-30vhost-user-blk: Implement reconnection during realizeKevin Wolf1-1/+15
Commit dabefdd6 removed code that was supposed to try reconnecting during .realize(), but actually just crashed and had several design problems. This adds the feature back without the crash in simple cases while also fixing some design problems: Reconnection is now only tried if there was a problem with the connection and not an error related to the content (which would fail again the same way in the next attempt). Reconnection is limited to three attempts (four with the initial attempt) so that we won't end up in an infinite loop if a problem is permanent. If the backend restarts three times in the very short time window of device initialisation, we have bigger problems and erroring out is the right course of action. In the case that a connection error occurs and we reconnect, the error message is printed using error_report_err(), but otherwise ignored. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-8-kwolf@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost-user-blk: Factor out vhost_user_blk_realize_connect()Kevin Wolf1-16/+32
This function is the part that we will want to retry if the connection is lost during initialisation, so factor it out to keep the following patch simpler. The error path for vhost_dev_get_config() forgot disconnecting the chardev, add this while touching the code. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-7-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost: Distinguish errors in vhost_dev_get_config()Kevin Wolf1-4/+5
Instead of just returning 0/-1 and letting the caller make up a meaningless error message, add an Error parameter to allow reporting the real error and switch to 0/-errno so that different kind of errors can be distinguished in the caller. config_len in vhost_user_get_config() is defined by the device, so if it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming error. Turn the corresponding check into an assertion. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-6-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost-user-blk: Add Error parameter to vhost_user_blk_start()Kevin Wolf1-16/+15
Instead of letting the caller make up a meaningless error message, add an Error parameter to allow reporting the real error. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-5-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-06-30vhost: Add Error parameter to vhost_dev_init()Kevin Wolf1-2/+2
This allows callers to return better error messages instead of making one up while the real error ends up on stderr. Most callers can immediately make use of this because they already have an Error parameter themselves. The others just keep printing the error with error_report_err(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210609154658.350308-2-kwolf@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Check that num-queues is supported by backendKevin Wolf1-0/+1
Creating a device with a number of queues that isn't supported by the backend is pointless, the device won't work properly and the error messages are rather confusing. Just fail to create the device if num-queues is higher than what the backend supports. Since the relationship between num-queues and the number of virtqueues depends on the specific device, this is an additional value that needs to be initialised by the device. For convenience, allow leaving it 0 if the check should be skipped. This makes sense for vhost-user-net where separate vhost devices are used for the queues and custom initialisation code is needed to perform the check. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935031 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-7-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Get more feature flags from vhost deviceKevin Wolf1-0/+2
VIRTIO_F_RING_PACKED and VIRTIO_F_IOMMU_PLATFORM need to be supported by the vhost device, otherwise advertising it to the guest doesn't result in a working configuration. They are currently not supported by the vhost-user-blk export in QEMU. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935020 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-5-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Improve error reporting in realizeKevin Wolf1-12/+11
Now that vhost_user_blk_connect() is not called from an event handler any more, but directly from vhost_user_blk_device_realize(), we can actually make use of Error again instead of calling error_report() in the inner function and setting a more generic and therefore less useful error message in realize() itself. With Error, the callers are responsible for adding context if necessary (such as the "-device" option the error refers to). Additional prefixes are redundant and better omitted. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210429171316.162022-4-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Don't reconnect during initialisationKevin Wolf1-42/+17
This is a partial revert of commits 77542d43149 and bc79c87bcde. Usually, an error during initialisation means that the configuration was wrong. Reconnecting won't make the error go away, but just turn the error condition into an endless loop. Avoid this and return errors again. Additionally, calling vhost_user_blk_disconnect() from the chardev event handler could result in use-after-free because none of the initialisation code expects that the device could just go away in the middle. So removing the call fixes crashes in several places. For example, using a num-queues setting that is incompatible with the backend would result in a crash like this (dereferencing dev->opaque, which is already NULL): #0 0x0000555555d0a4bd in vhost_user_read_cb (source=0x5555568f4690, condition=(G_IO_IN | G_IO_HUP), opaque=0x7fffffffcbf0) at ../hw/virtio/vhost-user.c:313 #1 0x0000555555d950d3 in qio_channel_fd_source_dispatch (source=0x555557c3f750, callback=0x555555d0a478 <vhost_user_read_cb>, user_data=0x7fffffffcbf0) at ../io/channel-watch.c:84 #2 0x00007ffff7b32a9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0 #3 0x00007ffff7b84a98 in g_main_context_iterate.constprop () at /lib64/libglib-2.0.so.0 #4 0x00007ffff7b32163 in g_main_loop_run () at /lib64/libglib-2.0.so.0 #5 0x0000555555d0a724 in vhost_user_read (dev=0x555557bc62f8, msg=0x7fffffffcc50) at ../hw/virtio/vhost-user.c:402 #6 0x0000555555d0ee6b in vhost_user_get_config (dev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost-user.c:2133 #7 0x0000555555d56d46 in vhost_dev_get_config (hdev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost.c:1566 #8 0x0000555555cdd150 in vhost_user_blk_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcf90) at ../hw/block/vhost-user-blk.c:510 #9 0x0000555555d08f6d in virtio_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcff0) at ../hw/virtio/virtio.c:3660 Note that this removes the ability to reconnect during initialisation (but not during operation) when there is no permanent error, but the backend restarts, as the implementation was buggy. This feature can be added back in a follow-up series after changing error paths to distinguish cases where retrying could help from cases with permanent errors. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210429171316.162022-3-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-05-18vhost-user-blk: Make sure to set Error on realize failureKevin Wolf1-3/+1
We have to set errp before jumping to virtio_err, otherwise the caller (virtio_device_realize()) will take this as success and crash when it later tries to access things that we've already freed in the error path. Fixes: 77542d431491788d1e8e79d93ce10172ef207775 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210429171316.162022-2-kwolf@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-30vhost-user-blk: Fail gracefully on too large queue sizeKevin Wolf1-0/+5
virtio_add_queue() aborts when queue_size > VIRTQUEUE_MAX_SIZE, so vhost_user_blk_device_realize() should check this before calling it. Simple reproducer: qemu-system-x86_64 \ -chardev null,id=foo \ -device vhost-user-blk-pci,queue-size=4096,chardev=foo Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935014 Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210413165654.50810-1-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-04-01vhost-user-blk: add immediate cleanup on shutdownDenis Plotnikov1-1/+1
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been finalized before the vhost-user-blk. This happens with char-socket chardev operating in the listening mode (server). The char-socket chardev emits "close" event at the end of finalizing when its internal data is destroyed. This calls vhost-user-blk event handler which in turn tries to manipulate with destroyed chardev by setting an empty event handler for vhost-user-blk cleanup postponing. This patch separates the shutdown case from the cleanup postponing removing the need to set an event handler. Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01vhost-user-blk: perform immediate cleanup if disconnect on initializationDenis Plotnikov1-24/+24
Commit 4bcad76f4c39 ("vhost-user-blk: delay vhost_user_blk_disconnect") introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts because of connection problems with vhost-blk daemon. However, it introdues a new problem. Now, any communication errors during execution of vhost_dev_init() called by vhost_user_blk_device_realize() lead to qemu abort on assert in vhost_dev_get_config(). This happens because vhost_user_blk_disconnect() is postponed but it should have dropped s->connected flag by the time vhost_user_blk_device_realize() performs a new connection opening. On the connection opening, vhost_dev initialization in vhost_user_blk_connect() relies on s->connection flag and if it's not dropped, it skips vhost_dev initialization and returns with success. Then, vhost_user_blk_device_realize()'s execution flow goes to vhost_dev_get_config() where it's aborted on the assert. To fix the problem this patch adds immediate cleanup on device initialization(in vhost_user_blk_device_realize()) using different event handlers for initialization and operation introduced in the previous patch. On initialization (in vhost_user_blk_device_realize()) we fully control the initialization process. At that point, nobody can use the device since it isn't initialized and we don't need to postpone any cleanups, so we can do cleaup right away when there is a communication problem with the vhost-blk daemon. On operation we leave it as is, since the disconnect may happen when the device is in use, so the device users may want to use vhost_dev's data to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()). Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-01vhost-user-blk: use different event handlers on initializationDenis Plotnikov1-7/+24
It is useful to use different connect/disconnect event handlers on device initialization and operation as seen from the further commit fixing a bug on device initialization. This patch refactors the code to make use of them: we don't rely any more on the VM state for choosing how to cleanup the device, instead we explicitly use the proper event handler depending on whether the device has been initialized. Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-08vhost-user-blk: fix blkcfg->num_queues endiannessStefan Hajnoczi1-4/+3
Treat the num_queues field as virtio-endian. On big-endian hosts the vhost-user-blk num_queues field was in the wrong endianness. Move the blkcfg.num_queues store operation from realize to vhost_user_blk_update_config() so feature negotiation has finished and we know the endianness of the device. VIRTIO 1.0 devices are little-endian, but in case someone wants to use legacy VIRTIO we support all endianness cases. Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20210223144653.811468-2-stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost1-0/+1
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.1 at 2025-01-30 03:10:54 +0000