aboutsummaryrefslogtreecommitdiff
path: root/hw/arm
AgeCommit message (Collapse)AuthorFilesLines
2024-02-27aspeed: fix hardcode boot address 0Jamin Lin3-4/+6
In the previous design of ASPEED SOCs QEMU model, it set the boot address at "0" which was the hardcode setting for ast10x0, ast2600, ast2500 and ast2400. According to the design of ast2700, it has a bootmcu(riscv-32) which is used for executing SPL and initialize DRAM and copy u-boot image from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage. Then, CPUs(cortex-a35) execute u-boot, kernel and rofs. Currently, qemu not support emulate two CPU architectures at the same machine. Therefore, qemu will only support to emulate CPU(cortex-a35) side for ast2700 and the boot address is "0x4 00000000". Fixed hardcode boot address "0" for future models using a different mapping address. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27aspeed: introduce a new UART0 device nameJamin Lin5-7/+16
The Aspeed datasheet refers to the UART controllers as UART1 - UART13 for the ast10x0, ast2600, ast2500 and ast2400 SoCs and the Aspeed ast2700 introduces an UART0 and the UART controllers as UART0 - UART12. To keep the naming in the QEMU models in sync with the datasheet, let's introduce a new UART0 device name and do the required adjustements. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> [ clg: - Kept original assert() in aspeed_soc_uart_set_chr() - Fixed 'i' range in connect_serial_hds_to_uarts() loop ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
2024-02-27hw/ide: Remove last two uses of ide/internal.h outside of hw/ide/BALATON Zoltan1-1/+1
Remove last two includes of hw/ide/intarnal.h outside of hw/ide and replace them with newly added public header to allow moving internal.h into hw/ide to really stop exposing it. Fixes: a11f439a0e (hw/ide: Stop exposing internal.h to non-IDE files) Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20240223142633.933694E6004@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-27hw/arm/sbsa-ref: Do not open-code ahci_ide_create_devs()Philippe Mathieu-Daudé1-10/+1
Use ahci_ide_create_devs() instead of open-coding it. Not accessing AHCIDevice internals anymore allows to remove "hw/ide/ahci_internal.h" (which isn't really a public header). Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240226080632.9596-2-philmd@linaro.org>
2024-02-27hw/usb: extract sysbus-ohci to a separate filePaolo Bonzini1-5/+7
Split the sysbus version to a separate file so that it is not included in PCI-only machines, and adjust Kconfig for machines that do need sysbus-ohci. The copyrights are based on the time and employer of balrog and Paul Brook's contributions. While adjusting the SM501 dependency, move it to the right place instead of keeping it in the R4D machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240223124406.234509-10-pbonzini@redhat.com> [PMD: Rename some functions using 'ohci_sysbus_' prefix] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-26hw/display/exynos4210_fimd: Pass frame buffer memory region as linkPhilippe Mathieu-Daudé1-0/+2
Add the Exynos4210fimdState::'framebuffer-memory' property. Have the board set it. We don't need to call sysbus_address_space() anymore. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-5-philmd@linaro.org>
2024-02-26hw/arm/exynos4210: Inline sysbus_create_varargs(EXYNOS4210_FIMD)Philippe Mathieu-Daudé1-5/+7
We want to set another qdev property (a link) for the FIMD device, we can not use sysbus_create_varargs() which only passes sysbus base address and IRQs as arguments. Inline it so we can set the link property in the next commit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240216153517.49422-4-philmd@linaro.org>
2024-02-26hw/display/pl110: Pass frame buffer memory region as link propertyPhilippe Mathieu-Daudé4-0/+11
Add the PL110::'framebuffer-memory' property. Have the different ARM boards set it. We don't need to call sysbus_address_space() anymore. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-3-philmd@linaro.org>
2024-02-26hw/arm: Inline sysbus_create_simple(PL110 / PL111)Philippe Mathieu-Daudé4-5/+21
We want to set another qdev property (a link) for the pl110 and pl111 devices, we can not use sysbus_create_simple() which only passes sysbus base address and IRQs as arguments. Inline it so we can set the link property in the next commit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240226173805.289-2-philmd@linaro.org>
2024-02-22hw/ide: Split qdev.c into ide-bus.c and ide-dev.cThomas Huth1-0/+2
qdev.c is a mixture between IDE bus specific functions and IDE device functions. Let's split it up to make it more obvious which part is related to bus handling and which part is related to device handling. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-ID: <20240220085505.30255-3-thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-02-16Merge tag 'hw-misc-20240215' of https://github.com/philmd/qemu into stagingPeter Maydell2-1/+2
Misc HW patch queue - Remove unused MIPS SAAR* registers (Phil) - Remove warning when testing the TC58128 NAND EEPROM (Peter) - KConfig cleanups around ISA SuperI/O and MIPS (Paolo) - QDev API uses sanitization (Philippe) - Split AHCI model as PCI / SysBus (Philippe) - Add SMP support to SPARC Leon3 board (Clément) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmXOUD4ACgkQ4+MsLN6t # wN6gWRAAjf+6Z9VUvvHqZoaSJW49k+GRUelTI2tyN+eGfetAx9dk8aIbpbV1X12d # pc56jsSi6ICT7baCegtxHszhYJr2e9A2QLCAOJt+Oz87kEGes3ONVVKAk7pwjKxt # m8pmU3uXWgFvU6PoFBhGBa6LiZBulgLNXBUwzmEhc9PpPkR49ULdDp/qxtWvxOV5 # xYBktFlkiT+AvHq3QWCnDIaw+pH5ghEq9BI4xFOvvvqSqdHEqsGAaiKPa9Po0Gfz # Ap9qsm4FxKxhGoeQWtAIP8TvN3pFFSXMysziP6Xt1rffKsvF9ioghGKRM6BgQfqD # ZetjcFbcf7dQu3zZVy8ljYcymMxfZcWWVVq4CMC68lPQE97hz1CT3PJjgd77dKfi # z60uRkOGaiPW5iIGT9+vdQxZ5K3HivKyjuHOdV8V4HnWO3oqgfDtNHn5RKed0qUg # g1FoWriJGsDixdx1vd0EoH2/oTxy4HIsFv7a1OjiZyBLjO+EeEZ3+H9pqUHqBxva # +Dv70z9F1sv5dzcUXH+oCgTbnKlJ90Q+e3vj0wGdlBncVsgIwbtgqYelhUEl+xJX # Mu6KNUo5ANVP38ZKG0GSMCZHfcUjc5s+5rG55NbTN0HiF56a6D2KlQAuXdUsGE1J # 7i4cwipJmfxzbdPDlSb3kBxm5pFexEk6nROF9kTHQj3ZBMMvIls= # =nOX+ # -----END PGP SIGNATURE----- # gpg: Signature made Thu 15 Feb 2024 17:56:14 GMT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * tag 'hw-misc-20240215' of https://github.com/philmd/qemu: (56 commits) hw/ide/ich9: Use AHCIPCIState typedef hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h' hw/ide/ahci: Remove SysbusAHCIState::num_ports field hw/ide/ahci: Do not pass 'ports' argument to ahci_realize() hw/ide/ahci: Convert AHCIState::ports to unsigned hw/ide/ahci: Pass AHCI context to ahci_ide_create_devs() hw/ide/ahci: Inline ahci_get_num_ports() hw/ide/ahci: Rename AHCI PCI function as 'pdev' hw/ide/ahci: Expose AHCIPCIState structure hw/i386/q35: Use DEVICE() cast macro with PCIDevice object hw/i386/q35: Simplify pc_q35_init() since PCI is always enabled MAINTAINERS: Add myself as reviewer for TCG Plugins MAINTAINERS: replace Fabien by myself as Leon3 maintainer hw/sparc/leon3: Initialize GPIO before realizing CPU devices hw/sparc/leon3: Pass DeviceState opaque argument to leon3_start_cpu() hw/sparc/leon3: Pass DeviceState opaque argument to leon3_set_pil_in() hw/sparc/leon3: check cpu_id in the tiny bootloader hw/sparc/leon3: implement multiprocessor hw/sparc/leon3: remove SP initialization target/sparc: implement asr17 feature for smp ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/ide/ahci: Move SysBus definitions to 'ahci-sysbus.h'Philippe Mathieu-Daudé2-1/+2
Keep "hw/ide/ahci.h" AHCI-generic. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240213081201.78951-10-philmd@linaro.org>
2024-02-15hw/arm/mps3r: Add remaining devicesPeter Maydell1-0/+74
Add the remaining devices (or unimplemented-device stubs) for this board: SPI controllers, SCC, FPGAIO, I2S, RTC, the QSPI write-config block, and ethernet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-13-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add GPIO, watchdog, dual-timer, I2C devicesPeter Maydell1-0/+59
Add the GPIO, watchdog, dual-timer and I2C devices to the mps3-an536 board. These are all simple devices that just need to be created and wired up. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-12-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add UARTsPeter Maydell1-0/+94
This board has a lot of UARTs: there is one UART per CPU in the per-CPU peripheral part of the address map, whose interrupts are connected as per-CPU interrupt lines. Then there are 4 UARTs in the normal part of the peripheral space, whose interrupts are shared peripheral interrupts. Connect and wire them all up; this involves some OR gates where multiple overflow interrupts are wired into one GIC input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-11-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Add CPUs, GIC, and per-CPU RAMPeter Maydell1-3/+177
Create the CPUs, the GIC, and the per-CPU RAM block for the mps3-an536 board. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240206132931.38376-10-peter.maydell@linaro.org
2024-02-15hw/arm/mps3r: Initial skeleton for mps3-an536 boardPeter Maydell3-0/+245
The AN536 is another FPGA image for the MPS3 development board. Unlike the existing FPGA images we already model, this board uses a Cortex-R family CPU, and it does not use any equivalent to the M-profile "Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c. It's therefore more convenient for us to model it as a completely separate C file. This commit adds the basic skeleton of the board model, and the code to create all the RAM and ROM. We assume that we're probably going to want to add more images in future, so use the same base class/subclass setup that mps2-tz.c uses, even though at the moment there's only a single subclass. Following commits will add the CPUs and the peripherals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
2024-02-15hw/arm/stellaris: Add missing QOM 'SoC' parentPhilippe Mathieu-Daudé1-1/+10
QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). Since we don't model the SoC, just use a QOM container. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Add missing QOM 'machine' parentPhilippe Mathieu-Daudé1-0/+4
QDev objects created with qdev_new() need to manually add their parent relationship with object_property_add_child(). This commit plug the devices which aren't part of the SoC; they will be plugged into a SoC container in the next one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Convert I2C controller to Resettable interfacePhilippe Mathieu-Daudé1-4/+22
Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240213155214.13619-3-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/stellaris: Convert ADC controller to Resettable interfacePhilippe Mathieu-Daudé1-2/+4
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240213155214.13619-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/smmuv3: add support for stage 1 access faultLuc Michel3-0/+13
An access fault is raised when the Access Flag is not set in the looked-up PTE and the AFFD field is not set in the corresponding context descriptor. This was already implemented for stage 2. Implement it for stage 1 as well. Signed-off-by: Luc Michel <luc.michel@amd.com> Reviewed-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240213082211.3330400-1-luc.michel@amd.com [PMM: tweaked comment text] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15hw/arm/npcm7xx: Call qemu_configure_nic_device() for GMAC modulesPeter Maydell1-0/+1
The patchset adding the GMAC ethernet to this SoC crossed in the mail with the patchset cleaning up the NIC handling. When we create the GMAC modules we must call qemu_configure_nic_device() so that the user has the opportunity to use the -nic commandline option to create a network backend and connect it to the GMACs. Add the missing call. Fixes: 21e5326a7c ("hw/arm: Add GMAC devices to NPCM7XX SoC") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Message-id: 20240206171231.396392-2-peter.maydell@linaro.org
2024-02-15hw/arm/virt: Wire up non-secure EL2 virtual timer IRQPeter Maydell2-15/+65
Armv8.1+ CPUs have the Virtual Host Extension (VHE) which adds a non-secure EL2 virtual timer. We implemented the timer itself in the CPU model, but never wired up its IRQ line to the GIC. Wire up the IRQ line (this is always safe whether the CPU has the interrupt or not, since it always creates the outbound IRQ line). Report it to the guest via dtb and ACPI if the CPU has the feature. The DTB binding is documented in the kernel's Documentation/devicetree/bindings/timer/arm\,arch_timer.yaml and the ACPI table entries are documented in the ACPI specification version 6.3 or later. Because the IRQ line ACPI binding is new in 6.3, we need to bump the FADT table rev to show that we might be using 6.3 features. Note that exposing this IRQ in the DTB will trigger a bug in EDK2 versions prior to edk2-stable202311, for users who use the virt board with 'virtualization=on' to enable EL2 emulation and are booting an EDK2 guest BIOS, if that EDK2 has assertions enabled. The effect is that EDK2 will assert on bootup: ASSERT [ArmTimerDxe] /home/kraxel/projects/qemu/roms/edk2/ArmVirtPkg/Library/ArmVirtTimerFdtClientLib/ArmVirtTimerFdtClientLib.c(72): PropSize == 36 || PropSize == 48 If you see that assertion you should do one of: * update your EDK2 binaries to edk2-stable202311 or newer * use the 'virt-8.2' versioned machine type * not use 'virtualization=on' (The versions shipped with QEMU itself have the fix.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Message-id: 20240122143537.233498-3-peter.maydell@linaro.org
2024-02-15hw/arm/xilinx_zynq: Wire FIQ between CPU <> GICPhilippe Mathieu-Daudé1-0/+2
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards, connect FIQ output of the GIC CPU interfaces to the CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240130152548.17855-1-philmd@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-14Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell1-0/+2
into staging virtio,pc,pci: features, cleanups, fixes vhost-user-snd support x2APIC mode with TCG support CXL update to r3.1 fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXMoXUPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpFtMIAKUKD0hzJrwOyPo4xsRUMbsB3ehIsJsMKfOK # w+JWzTaojAG8ENPelWBdL2sEIs5U73VOchjLqHbH2m5sz6GJ13214amvdU/fYc8+ # /dU2ZKoAmaR5L1ovKO/fq07y/J6DrITZ5tosy2i84Xa8EnsL4j3wEPNVWsDi7dna # mvXUICSOOoJQ4O2YhSruKCQ8qIgF1/0Oi3u/rcrW3alSs8VQlrtQXxl6k+LbYqek # +Fytco3jMRHPvQ+GYUIwGuHjN15ghArcvbsV0GIa+24BPY5h7YbDYGbfasePT5OK # zDz51jitkoyDrQr+OzwOEe/X5+dVGhayRXfMtU5Qm53IE3y61qc= # =K4b1 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 14 Feb 2024 11:18:13 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (60 commits) MAINTAINERS: Switch to my Enfabrica email virtio-gpu-rutabaga.c: override resource_destroy method virtio-gpu.c: add resource_destroy class method hw/display/virtio-gpu.c: use reset_bh class method hw/smbios: Fix port connector option validation hw/smbios: Fix OEM strings table option validation virtio-gpu: Correct virgl_renderer_resource_get_info() error check hw/cxl: Standardize all references on CXL r3.1 and minor updates hw/cxl: Update mailbox status registers. hw/cxl: Update RAS Capability Definitions for version 3. hw/cxl: Update link register definitions. hw/cxl: Update HDM Decoder capability to version 3 tests/acpi: Update DSDT.cxl to reflect change _STA return value. hw/i386: Fix _STA return value for ACPI0017 tests/acpi: Allow update of DSDT.cxl hw/mem/cxl_type3: Fix potential divide by zero reported by coverity hw/cxl: Pass NULL for a NULL MemoryRegionOps hw/cxl: Pass CXLComponentState to cache_mem_ops hw/cxl/device: read from register values in mdev_reg_read() hw/cxl/mbox: Remove dead code ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-14smmu: Clear SMMUPciBus pointer cache when system resetZhenzhong Duan1-0/+2
s->smmu_pcibus_by_bus_num is a SMMUPciBus pointer cache indexed by bus number, bus number may not always be a fixed value, i.e., guest reboot to different kernel which set bus number with different algorithm. This could lead to smmu_iommu_mr() providing the wrong iommu MR. Suggested-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20240125073706.339369-3-zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-13hw/arm/smmuv3: Consolidate the use of device_class_set_parent_realize()Zhao Liu1-2/+2
Use device_class_set_parent_realize() to set parent realize() directly. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-02-02Merge tag 'pull-target-arm-20240202' of ↵Peter Maydell16-75/+174
https://git.linaro.org/people/pmaydell/qemu-arm into staging target/arm: fix exception syndrome for AArch32 bkpt insn pci, vmbus, adb, s390x/css-bridge: Switch buses to 3-phase reset system/vl.c: Fix handling of '-serial none -serial something' target/arm: Add ID_AA64ZFR0_EL1.B16B16 to the exposed-to-userspace set tests/qtest/xlnx-versal-trng-test.c: Drop use of variable length array target/arm: Reinstate "vfp" property on AArch32 CPUs doc/sphinx/hxtool.py: add optional label argument to SRST directive hw/arm: Check for CPU types in machine_run_board_init() for various boards pci-host: designware: Limit value range of iATU viewport register hw/arm: Convert some DPRINTF macros to trace events and guest errors hw/arm: NPCM7XX SoC: Add GMAC ethernet controller devices hw/arm: Implement BCM2835 SPI Controller # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmW9C84ZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3qS6D/wM0/JGEYfaadpuMEOAx4PG # AnfScbPqVhx9J31P2Ks3VrB5F108aq/SaL2BmCb3BLF/ECChlhBXIjd7ukdHstts # F1TvqtvLGDZQz6wSVUeB0YOvAjGa3vIskn+Xvk9e6Ne6PcXgVnxAof/cPsXUiYNy # 6DJjNiLJ/a9Xgq9rjFO6vzW3AL95U6/FmD2F0pOotWXERhNhoyYVV6RtyeqKlDQP # yFVk5h601YURk9PeNZn9zpOpZqjAM7PxyF3X50N3Sv+G0uoKSr6b+c3/fDJbJo3+ # 0LXomEa8hdheQxm1dLY5OD0JX3bvYxwH41bDg9B0iEdjxUdXt6LfXI9Nvw9BAwix # 8AcGJJUaL4XU4uPfHBpRJApM15+MRb0hqfv4ZcGk8e67IIqVeDbKL2clTQGoHSg1 # KaB0POhtFx//M/uBOyk/FR2gb2eBNU8GuoCgxdDwh0K5ylcaK1YPiX4Tcglu4iS0 # Frvazphb2pO1BK6JiJwN2/9ezzDkDJqTKoSqdc4g3ETVOGnxr+tXwcds3t2iK3g2 # y+pgijDOAT3bJO5kYeGvhoEJPKqXwJ3UQ8zTJsU2XSYwBjIyv5V3oOn6elwYJaWq # yUDTC3QEK61KfnQnfTyLfdGWX1aVzHnYLWmQdO+3cczuQU0s0MP246Z1GAgDtgvD # jGjDBz6mryWvP2H0xSmERQ== # =azdP # -----END PGP SIGNATURE----- # gpg: Signature made Fri 02 Feb 2024 15:35:42 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240202' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) hw/arm: Connect SPI Controller to BCM2835 hw/ssi: Implement BCM2835 SPI Controller tests/qtest: Adding PCS Module test to GMAC Qtest hw/net: GMAC Tx Implementation hw/net: GMAC Rx Implementation tests/qtest: Creating qtest for GMAC Module hw/arm: Add GMAC devices to NPCM7XX SoC hw/net: Add NPCMXXX GMAC device hw/xen: convert stderr prints to error/warn reports hw/xen/xen-hvm-common.c: convert DPRINTF to tracepoints hw/xen/xen-mapcache.c: convert DPRINTF to tracepoints hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reports hw/arm/z2: convert DPRINTF to trace events and guest errors hw/arm/strongarm.c: convert DPRINTF to trace events and guest errors pci-host: designware: Limit value range of iATU viewport register hw/arm/zynq: Check for CPU types in machine_run_board_init() hw/arm/vexpress: Check for CPU types in machine_run_board_init() hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[] hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[] hw/arm/msf2: Simplify setting MachineClass::valid_cpu_types[] ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm: use qemu_configure_nic_device()David Woodhouse6-33/+10
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/stellaris: use qemu_find_nic_info()David Woodhouse1-8/+22
Rather than just using qemu_configure_nic_device(), populate the MAC address in the system-registers device by peeking at the NICInfo before it's assigned to the device. Generate the MAC address early, if there is no matching -nic option. Otherwise the MAC address wouldn't be generated until net_client_init1() runs. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/npcm7xx: use qemu_configure_nic_device, allow emc0/emc1 as aliasesDavid Woodhouse1-7/+9
Also update the test to specify which device to attach the test socket to, and remove the comment lamenting the fact that we can't do so. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/highbank: use qemu_create_nic_device()David Woodhouse1-7/+5
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/net/lan9118: use qemu_configure_nic_device()David Woodhouse4-9/+7
Some callers instantiate the device unconditionally, others will do so only if there is a NICInfo to go with it. This appears to be fairly random, but preseve the existing behaviour for now. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/net/smc91c111: use qemu_configure_nic_device()David Woodhouse5-34/+20
Some callers instantiate the device unconditionally, others will do so only if there is a NICInfo to go with it. This appears to be fairly random, but preserve the existing behaviour of each caller for now. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/fsl: use qemu_configure_nic_device()David Woodhouse4-4/+4
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/exynos4: use qemu_create_nic_device()David Woodhouse1-4/+2
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/aspeed: use qemu_configure_nic_device()David Woodhouse1-5/+4
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org>
2024-02-02hw/arm/allwinner: use qemu_configure_nic_device()David Woodhouse3-35/+4
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/virt: use pci_init_nic_devices()David Woodhouse1-3/+1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Thomas Huth <thuth@redhat.com>
2024-02-02hw/arm/sbsa-ref: use pci_init_nic_devices()David Woodhouse1-3/+1
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
2024-02-02hw/arm: Connect SPI Controller to BCM2835Rayhan Faizel2-1/+17
This patch will allow the SPI controller to be accessible from BCM2835 based boards as SPI0. SPI driver is usually disabled by default and config.txt does not work. Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com [PMM: indent tweak] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm: Add GMAC devices to NPCM7XX SoCHao Wu1-2/+35
Change-Id: Id8a3461fb5042adc4c3fd6f4fbd1ca0d33e22565 Signed-off-by: Hao Wu <wuhaotsh@google.com> Signed-off-by: Nabih Estefan <nabihestefan@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Message-id: 20240131002800.989285-3-nabihestefan@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/xen_arm.c: convert DPRINTF to trace events and error/warn reportsManos Pitsidianakis2-12/+16
Tracing DPRINTFs to stderr might not be desired. A developer that relies on trace events should be able to opt-in to each trace event and rely on QEMU's log redirection, instead of stderr by default. This commit converts DPRINTFs in this file that are used for tracing into trace events. Errors or warnings are converted to error_report and warn_report calls. Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: fe5e3bd54231abe933f95a24e0e88208cd8cfd8f.1706544115.git.manos.pitsidianakis@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/z2: convert DPRINTF to trace events and guest errorsManos Pitsidianakis2-19/+15
Tracing DPRINTFs to stderr might not be desired. A developer that relies on trace events should be able to opt-in to each trace event and rely on QEMU's log redirection, instead of stderr by default. This commit converts DPRINTFs in this file that are used for tracing into trace events. DPRINTFs that report guest errors are logged with LOG_GUEST_ERROR. Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 799c5141c5751cf2341e1d095349612e046424a8.1706544115.git.manos.pitsidianakis@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/strongarm.c: convert DPRINTF to trace events and guest errorsManos Pitsidianakis2-30/+55
Tracing DPRINTFs to stderr might not be desired. A developer that relies on trace events should be able to opt-in to each trace event and rely on QEMU's log redirection, instead of stderr by default. This commit converts DPRINTFs in this file that are used for tracing into trace events. DPRINTFs that report guest errors are logged with LOG_GUEST_ERROR.# Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 39db71dd87bf2007cf7812f3d91dde53887f1f2f.1706544115.git.manos.pitsidianakis@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/zynq: Check for CPU types in machine_run_board_init()Philippe Mathieu-Daudé1-1/+5
Leverage the common code introduced in commit c9cf636d48 ("machine: Add a valid_cpu_types property") to check for the single valid CPU type. Remove the now unused MachineClass::default_cpu_type field. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240129151828.59544-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/vexpress: Check for CPU types in machine_run_board_init()Philippe Mathieu-Daudé1-2/+10
Leverage the common code introduced in commit c9cf636d48 ("machine: Add a valid_cpu_types property") to check for the single valid CPU type. Remove the now unused MachineClass::default_cpu_type field. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240129151828.59544-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/npcm7xx_boards: Simplify setting MachineClass::valid_cpu_types[]Philippe Mathieu-Daudé1-1/+0
The npcm7xx Soc is created with a Cortex-A9 core, see in hw/arm/npcm7xx.c: static void npcm7xx_init(Object *obj) { NPCM7xxState *s = NPCM7XX(obj); for (int i = 0; i < NPCM7XX_MAX_NUM_CPUS; i++) { object_initialize_child(obj, "cpu[*]", &s->cpu[i], ARM_CPU_TYPE_NAME("cortex-a9")); } The MachineClass::default_cpu_type field is ignored: delete it. Use the common code introduced in commit c9cf636d48 ("machine: Add a valid_cpu_types property") to check for valid CPU type at the board level. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240129151828.59544-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-02hw/arm/musca: Simplify setting MachineClass::valid_cpu_types[]Philippe Mathieu-Daudé1-1/+0
Musca boards use the embedded subsystems (SSE) tied to a specific Cortex core. Our models only use the Cortex-M33. Use the common code introduced in commit c9cf636d48 ("machine: Add a valid_cpu_types property") to check for valid CPU type at the board level. Remove the now unused MachineClass::default_cpu_type field. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240129151828.59544-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.1 at 2025-07-10 00:58:48 +0000