aboutsummaryrefslogtreecommitdiff
path: root/hw/acpi/ich9.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-11hw/acpi/ich9: Add periodic and swsmi timerDominic Prinz1-0/+23
This patch implements the periodic and the swsmi ICH9 chipset timers. They are especially useful when prototyping UEFI firmware (e.g. with EDK2's OVMF) using QEMU. For backwards compatibility, the compat properties "x-smi-swsmi-timer", and "x-smi-periodic-timer" are introduced. Additionally, writes to the SMI_STS register are enabled for the corresponding two bits using a write mask to make future work easier. Signed-off-by: Dominic Prinz <git@dprinz.de> Message-Id: <1d90ea69e01ab71a0f2ced116801dc78e04f4448.1725991505.git.git@dprinz.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-06-19hw/acpi/ich9: Remove dead code related to 'acpi_memory_hotplug'Philippe Mathieu-Daudé1-22/+6
acpi_memory_hotplug::is_enabled is set to %true once via ich9_lpc_initfn() -> ich9_pm_add_properties(). No need to check it, so remove now dead code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20240617071118.60464-8-philmd@linaro.org>
2024-06-19hw/acpi/ich9: Remove 'memory-hotplug-support' propertyPhilippe Mathieu-Daudé1-18/+0
No external code sets the 'memory-hotplug-support' property, remove it. Suggested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20240617071118.60464-7-philmd@linaro.org>
2023-12-29hw/acpi: Constify VMStateRichard Henderson1-6/+6
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-22-richard.henderson@linaro.org>
2023-03-07pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callbackIgor Mammedov1-0/+6
Provide pcihp specific callback to check if bus is hotpluggable and consolidate its scattered hotplug criteria there. While at it clean up no longer needed qbus_set_hotplug_handler(BUS(bus), NULL) workarounds since callback makes qbus_is_hotpluggable() return correct answer even if hotplug_handler is set on bus. PS: see ("pci: fix 'hotplugglable' property behavior") for details why callback was introduced. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-35-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-03-07pcihp: move fields enabling hotplug into AcpiPciHpStateIgor Mammedov1-8/+7
... instead of duplicating them in piix4 and lpc and then trying to pass them to pcihp routines as arguments. it simplifies call sites and places pcihp specific in its own structure. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-34-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-27hw: Move ich9.h to southbridge/Bernhard Beschow1-1/+1
ICH9 is a south bridge which doesn't necessarily depend on x86, so move it into the southbridge folder, analoguous to PIIX. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213173033.98762-13-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-27hw/isa/lpc_ich9: Connect PM stuff to LPC internallyBernhard Beschow1-6/+2
Make TYPE_ICH9_LPC_DEVICE more self-contained by moving the call to ich9_lpc_pm_init() from board code to its realize function. In order to propagate x86_machine_is_smm_enabled(), introduce an "smm-enabled" property like we have in piix4. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230213173033.98762-8-shentey@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2022-12-21hw/acpi: Rename tco.c -> ich9_tco.cPhilippe Mathieu-Daudé1-1/+1
tco.c contains the ICH9 implementation of its "total cost of ownership". Rename it accordingly to emphasis this is a part of the ICH9 model. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221212105115.2113-1-philmd@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com>
2022-12-21ich9: honour 'enable_tco' propertyDaniel P. Berrangé1-2/+4
An 'ICH9-LPC.enable_tco' property has been exposed for a very long time, but attempts to set it have never been honoured. Originally, any user provided 'enable_tco' value was force replaced by a value passed from the machine type setup code that was determine by machine type compat properties. commit d6b304ba924b95d12edfddaac99777b577301309 Author: Eduardo Habkost <ehabkost@redhat.com> Date: Sat Jan 23 14:02:10 2016 -0200 machine: Remove no_tco field The field is always set to zero, so it is not necessary anymore. After legacy Q35 machine types were deleted in: commit 86165b499edf8b03bb2d0e926d116c2f12a95bfe Author: Eduardo Habkost <ehabkost@redhat.com> Date: Sat Jan 23 14:02:09 2016 -0200 q35: Remove old machine versions the machine type code ended up just unconditionally passing 'true', all the time, so this was further simplified in commit d6b304ba924b95d12edfddaac99777b577301309 Author: Eduardo Habkost <ehabkost@redhat.com> Date: Sat Jan 23 14:02:10 2016 -0200 machine: Remove no_tco field The field is always set to zero, so it is not necessary anymore. commit 18d6abae3ea092950629e5d26aff1dcfc9a2d78e Author: Eduardo Habkost <ehabkost@redhat.com> Date: Sat Jan 23 14:02:11 2016 -0200 ich9: Remove enable_tco arguments from init functions The enable_tco arguments are always true, so they are not needed anymore. Leaving the ich9_pm_init to just force set 'enable_tco' to true. This still overrides any user specified property. The initialization of property defaults should be done when properties are first registered, rather than during object construction. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20221216125749.596075-6-berrange@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-28Remove unnecessary minimum_version_id_old fieldsPeter Maydell1-3/+0
The migration code will not look at a VMStateDescription's minimum_version_id_old field unless that VMSD has set the load_state_old field to something non-NULL. (The purpose of minimum_version_id_old is to specify what migration version is needed for the code in the function pointed to by load_state_old to be able to handle it on incoming migration.) We have exactly one VMSD which still has a load_state_old, in the PPC CPU; every other VMSD which sets minimum_version_id_old is doing so unnecessarily. Delete all the unnecessary ones. Commit created with: sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old') with the one legitimate use then hand-edited back in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> --- It missed vmstate_ppc_cpu.
2021-11-15hw/acpi/ich9: Add compat prop to keep HPC bit set for 6.1 machine typeJulia Suvorova1-0/+18
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be turned on, while the switch to ACPI Hot-plug will be done in the DSDT table. Introducing 'x-keep-native-hpc' property disables the HPC bit only in 6.1 and as a result keeps the forced 'reserve-io' on pcie-root-ports in 6.1 too. [1] https://gitlab.com/qemu-project/qemu/-/issues/641 [2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409 Signed-off-by: Julia Suvorova <jusual@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20211112110857.3116853-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-04hw/acpi: define PIIX4 acpi pci hotplug property strings at a single placeAni Sinha1-1/+1
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being used for both q35 and i440fx machine types, it is better that we defined this property string at a single place within a header file like other PIIX4 properties. We can then use this single definition at all the places that needs it instead of duplicating the string everywhere. While at it, this change also adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses this definition at all places that were formally using the string value. Signed-off-by: Ani Sinha <ani@anisinha.ca> Message-Id: <20210816083214.105740-1-ani@anisinha.ca> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-07-16hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35Julia Suvorova1-1/+1
Q35 has three different types of PCI devices hot-plug: PCIe Native, SHPC Native and ACPI hot-plug. This patch changes the default choice for cold-plugged bridges from PCIe Native to ACPI Hot-plug with ability to use SHPC and PCIe Native for hot-plugged bridges. This is a list of the PCIe Native hot-plug issues that led to this change: * no racy behavior during boot (see 110c477c2ed) * no delay during deleting - after the actual power off software must wait at least 1 second before indicating about it. This case is quite important for users, it even has its own bug: https://bugzilla.redhat.com/show_bug.cgi?id=1594168 * no timer-based behavior - in addition to the previous example, the attention button has a 5-second waiting period, during which the operation can be canceled with a second press. While this looks fine for manual button control, automation will result in the need to queue or drop events, and the software receiving events in all sort of unspecified combinations of attention/power indicator states, which is racy and uppredictable. * fixes: * https://bugzilla.redhat.com/show_bug.cgi?id=1752465 * https://bugzilla.redhat.com/show_bug.cgi?id=1690256 To return to PCIe Native hot-plug: -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off Known issue: older linux guests need the following flag to allow hotplugged pci express devices to use io: -device pcie-root-port,io-reserve=4096. io is unusual for pci express so this seems minor. We'll fix this by a follow up patch. Signed-off-by: Julia Suvorova <jusual@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210713004205.775386-6-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-07-16hw/acpi/ich9: Enable ACPI PCI hot-plugJulia Suvorova1-0/+70
Add acpi_pcihp to ich9_pm as part of 'acpi-pci-hotplug-with-bridge-support' option. Set default to false. Signed-off-by: Julia Suvorova <jusual@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20210713004205.775386-3-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth1-1/+0
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-02-23acpi/core: always set SCI_EN when SMM isn't supportedIsaku Yamahata1-1/+1
If SMM is not supported, ACPI fixed hardware doesn't support legacy-mode. ACPI-only platform. Where SCI_EN in PM1_CNT register is always set. The bit tells OS legacy mode(SCI_EN cleared) or ACPI mode(SCI_EN set). With the next patch (setting fadt.smi_cmd = 0 when smm isn't enabled), guest Linux tries to switch to ACPI mode, finds smi_cmd = 0, and then fails to initialize acpi subsystem. This patch proactively fixes it. This patch changes guest ABI. To keep compatibility, use "smm-compat" introduced by earlier patch. If the property is true, disable new behavior. ACPI spec 4.8.10.1 PM1 Event Grouping PM1 Eanble Registers > For ACPI-only platforms (where SCI_EN is always set) Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <500f62081626997e46f96377393d3662211763a8.1613615732.git.isaku.yamahata@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant1-1/+1
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-09-29x86: cpuhp: refuse cpu hot-unplug request earlier if not supportedIgor Mammedov1-0/+12
CPU hot-unplug with SMM requires firmware participation to prevent guest crash (i.e. CPU can be removed only after OS _and_ firmware were prepared for the action). Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT feature bit, which is advertised by firmware when it has support for CPU hot-unplug. Use it to check if guest is able to handle unplug and make device_del fail gracefully if hot-unplug feature hasn't been negotiated. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-4-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29x86: cpuhp: prevent guest crash on CPU hotplug when broadcast SMI is in useIgor Mammedov1-1/+11
There were reports of guest crash on CPU hotplug, when using q35 machine type and OVMF with SMM, due to hotplugged CPU trying to process SMI at default SMI handler location without it being relocated by firmware first. Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with SMI support while SMI broadcast is in use. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20200923094650.1301166-3-imammedo@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-10qom: Put name parameter before value / visitor parameterMarkus Armbruster1-1/+1
The object_property_set_FOO() setters take property name and value in an unusual order: void object_property_set_FOO(Object *obj, FOO_TYPE value, const char *name, Error **errp) Having to pass value before name feels grating. Swap them. Same for object_property_set(), object_property_get(), and object_property_parse(). Convert callers with this Coccinelle script: @@ identifier fun = { object_property_get, object_property_parse, object_property_set_str, object_property_set_link, object_property_set_bool, object_property_set_int, object_property_set_uint, object_property_set, object_property_set_qobject }; expression obj, v, name, errp; @@ - fun(obj, v, name, errp) + fun(obj, name, v, errp) Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Convert that one manually. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Convert manually. Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused by RXCPU being used both as typedef and function-like macro there. Convert manually. The other files using RXCPU that way don't need conversion. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20200707160613.848843-27-armbru@redhat.com> [Straightforwad conflict with commit 2336172d9b "audio: set default value for pcspk.iobase property" resolved]
2020-05-15Drop more @errp parameters after previous commitMarkus Armbruster1-1/+1
Several functions can't fail anymore: ich9_pm_add_properties(), device_add_bootindex_property(), ppc_compat_add_property(), spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-16-armbru@redhat.com>
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster1-14/+9
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-03-16qom/object: Use common get/set uint helpersFelipe Franciosi1-87/+8
Several objects implemented their own uint property getters and setters, despite them being straightforward (without any checks/validations on the values themselves) and identical across objects. This makes use of an enhanced API for object_property_add_uintXX_ptr() which offers default setters. Some of these setters used to update the value even if the type visit failed (eg. because the value being set overflowed over the given type). The new setter introduces a check for these errors, not updating the value if an error occurred. The error is propagated. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16qom/object: enable setter for uint typesFelipe Franciosi1-2/+2
Traditionally, the uint-specific property helpers only offer getters. When adding object (or class) uint types, one must therefore use the generic property helper if a setter is needed (and probably duplicate some code writing their own getters/setters). This enhances the uint-specific property helper APIs by adding a bitwise-or'd 'flags' field and modifying all clients of that API to set this paramater to OBJ_PROP_FLAG_READ. This maintains the current behaviour whilst allowing others to also set OBJ_PROP_FLAG_WRITE (or use the more convenient OBJ_PROP_FLAG_READWRITE) in the future (which will automatically install a setter). Other flags may be added later. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-09hw/acpi: Include "hw/mem/nvdimm.h"Philippe Mathieu-Daudé1-0/+1
Both ich9.c and piix4.c use methods/definitions declared in the NVDIMM device header. Include it. This fixes (when modifying unrelated headers): hw/acpi/ich9.c:507:46: error: use of undeclared identifier 'TYPE_NVDIMM' if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { ^ hw/acpi/ich9.c:508:13: error: implicit declaration of function 'nvdimm_acpi_plug_cb' is invalid in C99 [-Werror,-Wimplicit-function-declaration] nvdimm_acpi_plug_cb(hotplug_dev, dev); ^ hw/acpi/piix4.c:403:46: error: use of undeclared identifier 'TYPE_NVDIMM' if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { ^ hw/acpi/piix4.c:404:13: error: implicit declaration of function 'nvdimm_acpi_plug_cb' is invalid in C99 [-Werror,-Wimplicit-function-declaration] nvdimm_acpi_plug_cb(hotplug_dev, dev); ^ Acked-by: John Snow <jsnow@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200228114649.12818-16-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09hw/southbridge/ich9: Removed unused headersPhilippe Mathieu-Daudé1-1/+0
The ICH9 chipset is not X86/PC specific. These files don't use anything declared by the "hw/i386/pc.h" or "hw/i386/ioapic.h" headers. Remove them. Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200228114649.12818-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-08-21hw/core: Move cpu.c, cpu.h from qom/ to hw/core/Markus Armbruster1-1/+1
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190709152053.16670-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h in comments replaced]
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster1-1/+1
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include hw/boards.h a bit lessMarkus Armbruster1-0/+1
hw/boards.h pulls in almost 60 headers. The less we include it into headers, the better. As a first step, drop superfluous inclusions, and downgrade some more to what's actually needed. Gets rid of just one inclusion into a header. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster1-1/+0
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster1-0/+1
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster1-0/+2
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-03-12i386, acpi: check acpi_memory_hotplug capacity in pre_plugWei Yang1-2/+13
Currently we do device realization like below: hotplug_handler_pre_plug() dc->realize() hotplug_handler_plug() Before we do device realization and plug, we should allocate necessary resources and check if memory-hotplug-support property is enabled. At the piix4 and ich9, the memory-hotplug-support property is checked at plug stage. This means that device has been realized and mapped into guest address space 'pc_dimm_plug()' by the time acpi plug handler is called, where it might fail and crash QEMU due to reaching g_assert_not_reached() (piix4) or error_abort (ich9). Fix it by checking if memory hotplug is enabled at pre_plug stage where we can gracefully abort hotplug request. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> CC: Igor Mammedov <imammedo@redhat.com> CC: Eric Blake <eblake@redhat.com> Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190301033548.6691-1-richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-04include/exec/poison: Mark CONFIG_KVM as poisoned, tooThomas Huth1-1/+0
CONFIG_KVM is only defined for target-specific code, so nobody should use it by accident in common code. To avoid such subtle bugs, CONFIG_KVM is now marked as poisoned in common code. The header include/sysemu/kvm.h is somewhat special since it is included all over the place from common code, too, so we need some extra logic via "#ifdef NEED_CPU_H" here to make sure that we can compile all files without problems. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1498454578-18709-4-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-10memhp: don't generate memory hotplug AML if it's not enabled/supportedIgor Mammedov1-1/+2
That reduces DSDT by 910 bytes when memory hotplug isn't enabled. While doing so drop intermediate variables/arguments passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making it local to memory_hotplug.c, hardcoding it there as it can't change. Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through intermediate variables/arguments where it's not needed. Instead initialize in module static variable when MMIO region is mapped and use that within memory_hotplug.c whenever it's required. That way MMIO base specified only at one place and AML with MMIO would always use the same value. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-11-15pc: memhp: move nvdimm hotplug out of memory hotplugXiao Guangrong1-2/+6
as they use completely different way to handle hotplug event Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-06-24pc: use new CPU hotplug interface since 2.7 machine typeIgor Mammedov1-0/+33
For compatibility reasons PC/Q35 will start with legacy CPU hotplug interface by default but with new CPU hotplug AML code since 2.7 machine type. That way legacy firmware that doesn't use QEMU generated ACPI tables will be able to continue using legacy CPU hotplug interface. While new machine type, with firmware supporting QEMU provided ACPI tables, will generate new CPU hotplug AML, which will switch to new CPU hotplug interface when guest OS executes its _INI method on ACPI tables loading. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add cpu._OST handlingIgor Mammedov1-0/+3
it adds HW and AML parts for CPU_Device._OST method handling to allow OSPM reports status of hot-(un)plug operation. And extends QMP command query-acpi-ospm-status to report CPU's OST info along with already reported PC-DIMM devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: implement hot-remove parts of CPU hotplug interfaceIgor Mammedov1-0/+7
it adds hw registers needed for handling CPU hot-remove and corresponding AML methods to request and eject a CPU with necessary hotplug callbacks in pc,piix4,ich9 code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add CPU devices AML with _STA methodIgor Mammedov1-3/+6
it adds CPU objects to DSDT with _STA method and QEMU side of CPU hotplug interface initialization with registers sufficient to handle _STA requests, including necessary hotplug callbacks in piix4,ich9 code. Hot-(un)plug hw/acpi parts will be added by corresponding follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24pc: piix4/ich9: add 'cpu-hotplug-legacy' propertyIgor Mammedov1-1/+22
It will be used to select which hotplug call-back is called and for switching from legacy mode into new one. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: use AcpiDeviceIfClass.send_event to issue GPE eventsIgor Mammedov1-13/+20
it reduces number of args passed in handlers by 1 and a number of used proxy wrappers saving ~20LOC. Also it allows to make cpu/mem hotplug code more universal as it would allow ARM to reuse it without rewrite by providing its own send_event callback to trigger events usiong GPIO instead of GPE as fixed hadrware ACPI model doen't have GPE at all. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: acpi: mark current CPU hotplug functions as legacyIgor Mammedov1-3/+4
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster1-0/+1
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-25ich9: Remove enable_tco arguments from init functionsEduardo Habkost1-5/+3
The enable_tco arguments are always true, so they are not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake1-21/+14
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake1-7/+7
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29x86: Clean up includesPeter Maydell1-0/+1
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2015-07-27hw/acpi/ich9: clean up stale comment about KVM not supporting SMMLaszlo Ersek1-2/+1
Commit fba72476c6 ("ich9: add smm_enabled field and arguments") detached SMM availability from kvm_enabled(). However, the comment in pm_reset() was not updated; let's do it now. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-trivial@nongnu.org Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.1 at 2024-10-02 06:34:24 +0000