aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-21include/exec: Move cpu_signal_handler declarationRichard Henderson22-89/+13
There is nothing target specific about this. The implementation is host specific, but the declaration is 100% common. Reviewed-By: Warner Losh <imp@bsdimp.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21Merge remote-tracking branch ↵Richard Henderson34-669/+1844
'remotes/alistair23/tags/pull-riscv-to-apply-20210921' into staging Second RISC-V PR for QEMU 6.2 - ePMP CSR address updates - Convert internal interrupts to use QEMU GPIO lines - SiFive PWM support - Support for RISC-V ACLINT - SiFive PDMA fixes - Update to u-boot instructions for sifive_u - mstatus.SD bug fix for hypervisor extensions - OpenTitan fix for USB dev address # gpg: Signature made Mon 20 Sep 2021 11:52:26 PM PDT # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair23/tags/pull-riscv-to-apply-20210921: (21 commits) hw/riscv: opentitan: Correct the USB Dev address target/riscv: csr: Rename HCOUNTEREN_CY and friends target/riscv: Backup/restore mstatus.SD bit when virtual register swapped docs/system/riscv: sifive_u: Update U-Boot instructions hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transfer hw/dma: sifive_pdma: allow non-multiple transaction size transactions hw/dma: sifive_pdma: claim bit must be set before DMA transactions hw/dma: sifive_pdma: reset Next* registers when Control.claim is set hw/riscv: virt: Add optional ACLINT support to virt machine hw/riscv: virt: Re-factor FDT generation hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINT hw/intc: Rename sifive_clint sources to riscv_aclint sources sifive_u: Connect the SiFive PWM device hw/timer: Add SiFive PWM support hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO lines hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO lines hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO lines hw/intc: sifive_clint: Use RISC-V CPU GPIO lines target/riscv: Expose interrupt pending bits as GPIO lines target/riscv: Fix satp write ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-09-21Merge remote-tracking branch ↵Peter Maydell24-168/+1825
'remotes/pmaydell/tags/pull-target-arm-20210921' into staging target-arm queue: * Optimize codegen for MVE when predication not active * hvf: Add Apple Silicon support * hw/intc: Set GIC maintenance interrupt level to only 0 or 1 * Fix mishandling of MVE FPSCR.LTPSIZE reset for usermode emulator * elf2dmp: Fix coverity nits # gpg: Signature made Tue 21 Sep 2021 16:31:17 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210921: (27 commits) target/arm: Optimize MVE 1op-immediate insns target/arm: Optimize MVE VSLI and VSRI target/arm: Optimize MVE VSHLL and VMOVL target/arm: Optimize MVE VSHL, VSHR immediate forms target/arm: Optimize MVE VMVN target/arm: Optimize MVE VDUP target/arm: Optimize MVE VNEG, VABS target/arm: Optimize MVE arithmetic ops target/arm: Optimize MVE logic ops target/arm: Add TB flag for "MVE insns not predicated" target/arm: Enforce that FPDSCR.LTPSIZE is 4 on inbound migration target/arm: Avoid goto_tb if we're trying to exit to the main loop hvf: arm: Add rudimentary PMC support arm: Add Hypervisor.framework build target hvf: arm: Implement PSCI handling hvf: arm: Implement -cpu host arm/hvf: Add a WFI handler hvf: Add Apple Silicon support hvf: Introduce hvf_arch_init() callback hvf: Add execute to dirty log permission bitmap ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21target/arm: Optimize MVE 1op-immediate insnsPeter Maydell1-5/+21
Optimize the MVE 1op-immediate insns (VORR, VBIC, VMOV) to use TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-13-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VSLI and VSRIPeter Maydell1-2/+2
Optimize the MVE shift-and-insert insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-12-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VSHLL and VMOVLPeter Maydell1-8/+59
Optimize the MVE VSHLL insns by using TCG vector ops when possible. This includes the VMOVL insn, which we handle in mve.decode as "VSHLL with zero shift count". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-11-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VSHL, VSHR immediate formsPeter Maydell1-20/+63
Optimize the MVE VSHL and VSHR immediate forms by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-10-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VMVNPeter Maydell1-1/+1
Optimize the MVE VMVN insn by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-9-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VDUPPeter Maydell1-4/+8
Optimize the MVE VDUP insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-8-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE VNEG, VABSPeter Maydell1-10/+22
Optimize the MVE VNEG and VABS insns by using TCG vector ops when possible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-7-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE arithmetic opsPeter Maydell1-9/+11
Optimize MVE arithmetic ops when we have a TCG vector operation we can use. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-6-peter.maydell@linaro.org
2021-09-21target/arm: Optimize MVE logic opsPeter Maydell1-15/+36
When not predicating, implement the MVE bitwise logical insns directly using TCG vector operations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-5-peter.maydell@linaro.org
2021-09-21target/arm: Add TB flag for "MVE insns not predicated"Peter Maydell7-9/+92
Our current codegen for MVE always calls out to helper functions, because some byte lanes might be predicated. The common case is that in fact there is no predication active and all lanes should be updated together, so we can produce better code by detecting that and using the TCG generic vector infrastructure. Add a TB flag that is set when we can guarantee that there is no active MVE predication, and a bool in the DisasContext. Subsequent patches will use this flag to generate improved code for some instructions. In most cases when the predication state changes we simply end the TB after that instruction. For the code called from vfp_access_check() that handles lazy state preservation and creating a new FP context, we can usually avoid having to try to end the TB because luckily the new value of the flag following the register changes in those sequences doesn't depend on any runtime decisions. We do have to end the TB if the guest has enabled lazy FP state preservation but not automatic state preservation, but this is an odd corner case that is not going to be common in real-world code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-4-peter.maydell@linaro.org
2021-09-21target/arm: Enforce that FPDSCR.LTPSIZE is 4 on inbound migrationPeter Maydell1-0/+13
Architecturally, for an M-profile CPU with the LOB feature the LTPSIZE field in FPDSCR is always constant 4. QEMU's implementation enforces this everywhere, except that we don't check that it is true in incoming migration data. We're going to add come in gen_update_fp_context() which relies on the "always 4" property. Since this is TCG-only, we don't actually need to be robust to bogus incoming migration data, and the effect of it being wrong would be wrong code generation rather than a QEMU crash; but if it did ever happen somehow it would be very difficult to track down the cause. Add a check so that we fail the inbound migration if the FPDSCR.LTPSIZE value is incorrect. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-3-peter.maydell@linaro.org
2021-09-21target/arm: Avoid goto_tb if we're trying to exit to the main loopPeter Maydell1-1/+33
Currently gen_jmp_tb() assumes that if it is called then the jump it is handling is the only reason that we might be trying to end the TB, so it will use goto_tb if it can. This is usually the case: mostly "we did something that means we must end the TB" happens on a non-branch instruction. However, there are cases where we decide early in handling an instruction that we need to end the TB and return to the main loop, and then the insn is a complex one that involves gen_jmp_tb(). For instance, for M-profile FP instructions, in gen_preserve_fp_state() which is called from vfp_access_check() we want to force an exit to the main loop if lazy state preservation is active and we are in icount mode. Make gen_jmp_tb() look at the current value of is_jmp, and only use goto_tb if the previous is_jmp was DISAS_NEXT or DISAS_TOO_MANY. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210913095440.13462-2-peter.maydell@linaro.org
2021-09-21hvf: arm: Add rudimentary PMC supportAlexander Graf1-0/+179
We can expose cycle counters on the PMU easily. To be as compatible as possible, let's do so, but make sure we don't expose any other architectural counters that we can not model yet. This allows OSs to work that require PMU support. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-10-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21arm: Add Hypervisor.framework build targetAlexander Graf3-0/+12
Now that we have all logic in place that we need to handle Hypervisor.framework on Apple Silicon systems, let's add CONFIG_HVF for aarch64 as well so that we can build it. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> (x86 only) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210916155404.86958-9-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21hvf: arm: Implement PSCI handlingAlexander Graf3-7/+139
We need to handle PSCI calls. Most of the TCG code works for us, but we can simplify it to only handle aa64 mode and we need to handle SUSPEND differently. This patch takes the TCG code as template and duplicates it in HVF. To tell the guest that we support PSCI 0.2 now, update the check in arm_cpu_initfn() as well. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-8-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21hvf: arm: Implement -cpu hostPeter Maydell5-6/+124
Now that we have working system register sync, we push more target CPU properties into the virtual machine. That might be useful in some situations, but is not the typical case that users want. So let's add a -cpu host option that allows them to explicitly pass all CPU capabilities of their host CPU into the guest. Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-7-agraf@csgraf.de [PMM: drop unnecessary #include line from .h file] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21arm/hvf: Add a WFI handlerPeter Collingbourne3-3/+82
Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI. In this implementation IPI is blocked on the CPU thread at startup and pselect() is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely. Signed-off-by: Peter Collingbourne <pcc@google.com> Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Message-id: 20210916155404.86958-6-agraf@csgraf.de [agraf: Remove unused 'set' variable, always advance PC on WFX trap, support vm stop / continue operations and cntv offsets] Signed-off-by: Alexander Graf <agraf@csgraf.de> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210920' ↵Peter Maydell15-76/+529
into staging Aspeed patches : * MAC enablement fixes (Guenter) * Watchdog and pca9552 fixes (Andrew) * GPIO fixes (Joel) * AST2600A3 SoC and DPS310 models (Joel) * New Fuji BMC machine (Peter) # gpg: Signature made Mon 20 Sep 2021 07:51:23 BST # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210920: hw/arm/aspeed: Add Fuji machine type hw/arm/aspeed: Allow machine to set UART default hw/arm/aspeed: Initialize AST2600 UART clock selection registers arm/aspeed: Add DPS310 to Witherspoon and Rainier hw/misc: Add Infineon DPS310 sensor model aspeed: Emulate the AST2600A3 arm/aspeed: rainier: Add i2c eeproms and muxes misc/pca9552: Fix LED status register indexing in pca955x_get_led() hw: aspeed_gpio: Clarify GPIO controller name hw: aspeed_gpio: Simplify 1.8V defines watchdog: aspeed: Fix sequential control writes watchdog: aspeed: Sanitize control register values hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a hw: arm: aspeed: Enable eth0 interface for aspeed-ast2600-evb Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-21hw/riscv: opentitan: Correct the USB Dev addressAlistair Francis1-1/+1
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: d6cb4dfe75a2f536f217d7075b750ece3acb1535.1631767043.git.alistair.francis@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21target/riscv: csr: Rename HCOUNTEREN_CY and friendsBin Meng2-16/+16
The macro name HCOUNTEREN_CY suggests it is for CSR HCOUNTEREN, but in fact it applies to M-mode and S-mode CSR too. Rename these macros to have the COUNTEREN_ prefix. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210915084601.24304-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21target/riscv: Backup/restore mstatus.SD bit when virtual register swappedFrank Chang1-1/+2
When virtual registers are swapped, mstatus.SD bit should also be backed up/restored. Otherwise, mstatus.SD bit will be incorrectly kept across the world switches. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210914013717.881430-1-frank.chang@sifive.com [ Changes by AF: - Convert variable to a uint64_t to fix clang error ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21docs/system/riscv: sifive_u: Update U-Boot instructionsBin Meng1-23/+26
In U-Boot v2021.07 release, there were 2 major changes for the SiFive Unleashed board support: - Board config name was changed from sifive_fu540_defconfig to sifive_unleashed_defconfig - The generic binman tool was used to generate the FIT image (combination of U-Boot proper, DTB and OpenSBI firmware) which make the existing U-Boot instructions out of date. Update the doc with latest instructions. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210911153431.10362-1-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: don't set Control.error if 0 bytes to transferFrank Chang1-6/+6
Real PDMA doesn't set Control.error if there are 0 bytes to be transferred. The DMA transfer is still success. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 => mw.l 0x3000000 0x1 <= Claim channel 0 => mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes) => mw.q 0x3000008 0x0 <= NextBytes = 0 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 55000000 00000000 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 40000001 55000000 00000000 00000000 ...@...U........ 03000010: 84000000 00000000 84001000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-5-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: allow non-multiple transaction size transactionsGreen Wan1-6/+10
Real PDMA is able to deal with non-multiple transaction size transactions. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 => mw.l 0x3000000 0x1 <= Claim channel 0 => mw.l 0x3000004 0x11000000 <= wsize = rsize = 1 (2^1 = 2 bytes) => mw.q 0x3000008 0x3 <= NextBytes = 3 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 11000000 00000003 00000000 ................ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 40000001 11000000 00000003 00000000 ...@............ 03000010: 84000000 00000000 84001000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87345678 xV4. 84001000: 12345678 xV4. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Frank Chang <frank.chang@sifive.com> Message-id: 20210912130553.179501-4-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: claim bit must be set before DMA transactionsFrank Chang1-0/+9
Real PDMA must have Control.claim bit to be set before Control.run bit is set to start any DMA transactions. Otherwise nothing will be transferred. The following result is PDMA tested in U-Boot on Unmatched board: => mw.l 0x3000000 0x0 <= Disclaim channel 0 (Channel 0 is not claimed) => mw.l 0x3000004 0x55000000 <= wsize = rsize = 5 (2^5 = 32 bytes) => mw.q 0x3000008 0x2 <= NextBytes = 2 => mw.q 0x3000010 0x84000000 <= NextDestination = 0x84000000 => mw.q 0x3000018 0x84001000 <= NextSource = 0x84001000 => mw.l 0x84000000 0x87654321 <= Fill test data to dst => mw.l 0x84001000 0x12345678 <= Fill test data to src => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000000 55000000 00000002 00000000 .......U........ 03000010: 84000000 00000000 84001000 00000000 ................ => mw.l 0x3000000 0x3 <= Set channel 0 run and claim bits => md.l 0x3000000 8 <= Dump PDMA status 03000000: 00000001 66000000 00000000 00000000 .......f........ 03000010: 00000000 00000000 00000000 00000000 ................ => md.l 0x84000000 1; md.l 0x84001000 1 <= Dump src/dst memory contents 84000000: 87654321 !Ce. 84001000: 12345678 xV4. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-3-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/dma: sifive_pdma: reset Next* registers when Control.claim is setFrank Chang1-0/+19
Setting Control.claim clears all of the chanel's Next registers. This is effective only when Control.claim is set from 0 to 1. Signed-off-by: Frank Chang <frank.chang@sifive.com> Tested-by: Max Hsu <max.hsu@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210912130553.179501-2-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Add optional ACLINT support to virt machineAnup Patel3-1/+124
We extend virt machine to emulate ACLINT devices only when "aclint=on" parameter is passed along with machine name in QEMU command-line. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-5-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/riscv: virt: Re-factor FDT generationAnup Patel1-200/+327
We re-factor and break the FDT generation into smaller functions so that it is easier to modify FDT generation for different configurations of virt machine. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-4-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINTAnup Patel8-156/+339
The RISC-V ACLINT is more modular and backward compatible with original SiFive CLINT so instead of duplicating the original SiFive CLINT implementation we upgrade the current SiFive CLINT implementation to RISC-V ACLINT implementation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-3-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Rename sifive_clint sources to riscv_aclint sourcesAnup Patel11-15/+15
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT implementation so let's first rename the sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21sifive_u: Connect the SiFive PWM deviceAlistair Francis4-2/+69
Connect the SiFive PWM device and expose it via the device tree. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 22f98648b4e012f78529a56f5ca60b0b27852a4d.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/timer: Add SiFive PWM supportAlistair Francis5-0/+540
This is the initial commit of the SiFive PWM timer. This is used by guest software as a timer and is included in the SiFive FU540 SoC. Signed-off-by: Justin Restivo <jrestivo@draper.com> Signed-off-by: Alexandra Clifford <aclifford@draper.com> Signed-off-by: Amanda Strnad <astrnad@draper.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 9f70a210acbfaf0e1ea6ad311ab892ac69134d8b.1631159656.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_timer: Convert the timer to use RISC-V CPU GPIO linesAlistair Francis3-5/+17
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 84d5b1d5783d2e79eee69a2f7ac480cc0c070db3.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: sifive_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis7-12/+33
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 0364190bfa935058a845c0fa1ecf650328840ad5.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: ibex_plic: Convert the PLIC to use RISC-V CPU GPIO linesAlistair Francis3-11/+16
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the external MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 0a76946981852f5bd15f0c37ab35b253371027a8.1630301632.git.alistair.francis@wdc.com
2021-09-21hw/intc: sifive_clint: Use RISC-V CPU GPIO linesAlistair Francis2-20/+50
Instead of using riscv_cpu_update_mip() let's instead use the new RISC-V CPU GPIO lines to set the timer and soft MIP bits. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Message-id: 946e1ef5e268b24084c7ddad84c146de62a56736.1630301632.git.alistair.francis@wdc.com
2021-09-21target/riscv: Expose interrupt pending bits as GPIO linesAlistair Francis1-0/+30
Expose the 12 interrupt pending bits in MIP as GPIO lines. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 069d6162f0bc2f4a4f5a44e73f6442b11c703c53.1630301632.git.alistair.francis@wdc.com
2021-09-21target/riscv: Fix satp writeLIU Zhiwei1-1/+1
These variables should be target_ulong. If truncated to int, the bool conditions they indicate will be wrong. As satp is very important for Linux, this bug almost fails every boot. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210901124539.222868-1-zhiwei_liu@c-sky.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21target/riscv: Update the ePMP CSR addressAlistair Francis2-2/+3
Update the ePMP CSRs to match the 0.9.3 ePMP spec https://github.com/riscv/riscv-tee/blob/61455747230a26002d741f64879dd78cc9689323/Smepmp/Smepmp.pdf Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 28c908de60b9b04fa20e63d113885c98586053f3.1630543194.git.alistair.francis@wdc.com
2021-09-20Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell2-8/+33
staging # gpg: Signature made Fri 17 Sep 2021 09:17:32 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: virtio-net: fix use after unmap/free for sg ebpf: only include in system emulators Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/python-pull-request' ↵Peter Maydell2-2/+8
into staging Python Pull request This fixes the check-python-tox job. CI including optional jobs is all green: https://gitlab.com/jsnow/qemu/-/pipelines/372151147 # gpg: Signature made Thu 16 Sep 2021 23:05:35 BST # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jsnow-gitlab/tags/python-pull-request: python: pylint 2.11 support python: Update for pylint 2.10 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Add Apple Silicon supportAlexander Graf7-1/+834
With Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU. This patch adds all necessary architecture specific code to get basic VMs working, including save/restore. Known limitations: - WFI handling is missing (follows in later patch) - No watchpoint/breakpoint support Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-5-agraf@csgraf.de [PMM: added missing #include] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Introduce hvf_arch_init() callbackAlexander Graf3-1/+8
We will need to install a migration helper for the ARM hvf backend. Let's introduce an arch callback for the overall hvf init chain to do so. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-4-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hvf: Add execute to dirty log permission bitmapAlexander Graf1-2/+2
Hvf's permission bitmap during and after dirty logging does not include the HV_MEMORY_EXEC permission. At least on Apple Silicon, this leads to instruction faults once dirty logging was enabled. Add the bit to make it work properly. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-3-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20arm: Move PMC register definitions to internals.hAlexander Graf2-44/+44
We will need PMC register definitions in accel specific code later. Move all constant definitions to common arm headers so we can reuse them. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210916155404.86958-2-agraf@csgraf.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20hw/intc: Set GIC maintenance interrupt level to only 0 or 1Shashi Mallela1-2/+3
During sbsa acs level 3 testing, it is seen that the GIC maintenance interrupts are not triggered and the related test cases fail. This is because we were incorrectly passing the value of the MISR register (from maintenance_interrupt_state()) to qemu_set_irq() as the level argument, whereas the device on the other end of this irq line expects a 0/1 value. Fix the logic to pass a 0/1 level indication, rather than a 0/not-0 value. Fixes: c5fc89b36c0 ("hw/intc/arm_gicv3: Implement gicv3_cpuif_virt_update()") Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210915205809.59068-1-shashi.mallela@linaro.org [PMM: tweaked commit message; collapsed nested if()s into one] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-09-20target/arm: Consolidate ifdef blocks in resetPeter Maydell1-12/+10
Move an ifndef CONFIG_USER_ONLY code block up in arm_cpu_reset() so it can be merged with another earlier one. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210914120725.24992-4-peter.maydell@linaro.org
generated by cgit v1.1 at 2024-08-18 12:36:20 +0000