aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-01hw/arm/raspi: Display the board revision in the machine descriptionPhilippe Mathieu-Daudé1-1/+3
Display the board revision in the machine description. Before: $ qemu-system-aarch64 -M help | fgrep raspi raspi2 Raspberry Pi 2B raspi3 Raspberry Pi 3B After: raspi2 Raspberry Pi 2B (revision 1.1) raspi3 Raspberry Pi 3B (revision 1.2) Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200924111808.77168-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01hw/arm/raspi: Remove ignore_memory_transaction_failures on the raspi2Philippe Mathieu-Daudé1-3/+0
Commit 1c3db49d39 added the raspi3, which uses the same peripherals than the raspi2 (but with different ARM cores). The raspi3 was introduced without the ignore_memory_transaction_failures flag. Almost 2 years later, the machine is usable running U-Boot and Linux. In commit 00cbd5bd74 we mapped a lot of unimplemented devices, commit d442d95f added thermal block and commit 0e5bbd7406 the system timer. As we are happy with the raspi3, let's remove this flag on the raspi2. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200921034729.432931-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01hw/arm/bcm2835: Add more unimplemented peripheralsPhilippe Mathieu-Daudé2-0/+4
The bcm2835-v3d is used since Linux 4.7, see commit 49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree"), and the bcm2835-txp since Linux 4.19, see commit b7dd29b401f5 ("ARM: dts: bcm283x: Add Transposer block"). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200921034729.432931-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01hw/arm/raspi: Define various blocks base addressesPhilippe Mathieu-Daudé1-8/+43
The Raspberry firmware is closed-source. While running it, it accesses various I/O registers. Logging these accesses as UNIMP (unimplemented) help to understand what the firmware is doing (ideally we want it able to boot a Linux kernel). Document various blocks we might use later. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc.michel@greensocs.com> Message-id: 20200921034729.432931-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01target/arm: Fix SVE spliceRichard Henderson1-1/+1
While converting to gen_gvec_ool_zzzp, we lost passing a->esz as the data argument to the function. Fixes: 36cbb7a8e71 Cc: qemu-stable@nongnu.org Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200918000500.2690937-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01target/arm: Fix sve ldr/strRichard Henderson1-2/+2
The mte update missed a bit when producing clean addresses. Fixes: b2aa8879b88 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200916014102.2446323-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01target/arm: Make isar_feature_aa32_fp16_arith() handle M-profilePeter Maydell1-5/+26
The M-profile definition of the MVFR1 ID register differs slightly from the A-profile one, and in particular the check for "does the CPU support fp16 arithmetic" is not the same. We don't currently implement any M-profile CPUs with fp16 arithmetic, so this is not yet a visible bug, but correcting the logic now disarms this beartrap for when we eventually do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-6-peter.maydell@linaro.org
2020-10-01target/arm: Add ID register values for Cortex-M0Peter Maydell1-0/+24
Give the Cortex-M0 ID register values corresponding to its implemented behaviour. These will not be guest-visible but will be used to govern the behaviour of QEMU's emulation. We use the same values that the Cortex-M3 does. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-5-peter.maydell@linaro.org
2020-10-01hw/intc/armv7m_nvic: Only show ID register values for Main Extension CPUsPeter Maydell1-0/+42
M-profile CPUs only implement the ID registers as guest-visible if the CPU implements the Main Extension (all our current CPUs except the Cortex-M0 do). Currently we handle this by having the Cortex-M0 leave the ID register values in the ARMCPU struct as zero, but this conflicts with our design decision to make QEMU behaviour be keyed off ID register fields wherever possible. Explicitly code the ID registers in the NVIC to return 0 if the Main Extension is not implemented, so we can make the M0 model set the ARMCPU struct fields to obtain the correct behaviour without those values becoming guest-visible. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-4-peter.maydell@linaro.org
2020-10-01target/arm: Move id_pfr0, id_pfr1 into ARMISARegistersPeter Maydell7-40/+44
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters sub-struct. We're going to want id_pfr1 for an isar_features check, and moving both at the same time avoids an odd inconsistency. Changes other than the ones to cpu.h and kvm64.c made automatically with: perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
2020-10-01target/arm: Replace ARM_FEATURE_PXN with ID_MMFR0.VMSA checkPeter Maydell3-4/+17
The ARM_FEATURE_PXN bit indicates whether the CPU supports the PXN bit in short-descriptor translation table format descriptors. This is indicated by ID_MMFR0.VMSA being at least 0b0100. Replace the feature bit with an ID register check, in line with our preference for ID register checks over feature bits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200910173855.4068-2-peter.maydell@linaro.org
2020-10-01Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell100-1168/+3842
staging * SCSI fix (Dmitry, Li Feng, Li Qiang) * memory API fixes (Eduardo) * removal of deprecated '-numa node', 'cpu-add', '-smp' (Igor) * ACPI fix for VMBus (Jon) * relocatable install (myself) * always remove docker containers (myself) * serial cleanups (Philippe) * vmware cpuid leaf for tsc and apic frequency (Sunil) * KVM_FEATURE_ASYNC_PF_INT support (Vitaly) * i386 XSAVE bugfix (Xiaoyao) * QOM developer documentation in docs/devel (Eduardo) * new checkpatch tests (Dov) * x86_64 syscall fix (Douglas) * interrupt-based APF fix (Vitaly) * always create kvmclock (Vitaly) * fix bios-tables-test (Eduardo) * KVM PV features cleanup (myself) * CAN FD (Pavel) meson: * fixes (Marc-André, Max, Stefan, Alexander, myself) * moved libmpathpersist, cocoa, malloc tests (myself) * support for 0.56 introspected test dependencies (myself) # gpg: Signature made Wed 30 Sep 2020 18:11:45 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (86 commits) hw/net/can: Correct Kconfig dependencies hw/net/can: Documentation for CTU CAN FD IP open hardware core emulation. hw/net/can: CTU CAN FD IP open hardware core emulation. hw/net/can/ctucafd: Add CTU CAN FD core register definitions. net/can: Add can_dlc2len and can_len2dlc for CAN FD. hw/net/can: sja1000 ignore CAN FD frames net/can: Initial host SocketCan support for CAN FD. target/i386: kvm: do not use kvm_check_extension to find paravirtual capabilities bios-tables-test: Remove kernel-irqchip=off option target/i386: always create kvmclock device target/i386: Fix VM migration when interrupt based APF is enabled helper_syscall x86_64: clear exception_is_int checkpatch: Detect '%#' or '%0#' in printf-style format strings typedefs: Restrict PCMachineState to 'hw/i386/pc.h' hw/xen: Split x86-specific declaration from generic hardware ones stubs: Split accelerator / hardware related stubs sysemu/xen: Add missing 'exec/cpu-common.h' header for ram_addr_t type hw/i386/xen: Rename X86/PC specific function as xen_hvm_init_pc() docs: Move object.h overview doc comment to qom.rst docs: Create docs/devel/qom.rst ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-30hw/net/can: Correct Kconfig dependenciesPavel Pisa1-4/+3
The original CAN_PCI config option enables multiple SJA1000 PCI boards emulation build. These boards bridge SJA1000 into I/O or memory address space of the host CPU and depend on SJA1000 emulation. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Message-Id: <dd332de687bfe52bbec37f5de1d861fb8e620d74.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/net/can: Documentation for CTU CAN FD IP open hardware core emulation.Pavel Pisa2-11/+111
Updated MAINTAINERS for CAN bus related emulation as well. Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Message-Id: <6d1b8db69efc4e5cfad702d2150e1960e8f63572.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/net/can: CTU CAN FD IP open hardware core emulation.Jan Charvat5-0/+1117
The implementation of the model of complete open-source/design/hardware CAN FD controller. The IP core project has been started and is maintained by Ondrej Ille at Czech Technical University in Prague. CTU CAN FD project pages: https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core CAN bus CTU FEE Projects Listing page: http://canbus.pages.fel.cvut.cz/ The core is mapped to PCIe card same as on one of its real hardware adaptations. The device implementing two CTU CAN FD ip cores is instantiated after CAN bus definition -object can-bus,id=canbus0-bus by QEMU parameters -device ctucan_pci,canbus0=canbus0-bus,canbus1=canbus0-bus Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Message-Id: <23e3ca4dcb2cc9900991016910a6cab7686c0e31.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/net/can/ctucafd: Add CTU CAN FD core register definitions.Jan Charvat2-0/+1160
Definitions of registers and CAN FD frame message box of CTU CAN FD IP core are generated the specification in CACTUS/IP-XACT format. CTU CAN FD IP core repository https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core The location of the CTU CAN IP core specification within IP core design spec/CTU/ip/CAN_FD_IP_Core/2.1/CAN_FD_IP_Core.2.1.xml The header files are generated by pyXact_generator designed by Ondrej Ille which is based on ipyxact_parser. The specification is source of header files for driver and emulation, documentation and VHDL registers map implementation. Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Message-Id: <97ae620f724bf1d76f127aaf628f7aec3af0a11c.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30net/can: Add can_dlc2len and can_len2dlc for CAN FD.Jan Charvat2-0/+40
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-Id: <0a2efc6ef9c458505952ed230e49ae25cad7f324.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/net/can: sja1000 ignore CAN FD framesJan Charvat1-6/+23
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-Id: <48d9ebf6b64e7652851c12fe4566e06b44803372.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30net/can: Initial host SocketCan support for CAN FD.Jan Charvat3-4/+53
Signed-off-by: Jan Charvat <charvj10@fel.cvut.cz> Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Message-Id: <41383d4eb3f35586c696a8e29c4dff4031a81338.1600069689.git.pisa@cmp.felk.cvut.cz> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: kvm: do not use kvm_check_extension to find paravirtual ↵Paolo Bonzini1-32/+0
capabilities Paravirtualized features have been listed in KVM_GET_SUPPORTED_CPUID since Linux 2.6.35 (commit 84478c829d0f, "KVM: x86: export paravirtual cpuid flags in KVM_GET_SUPPORTED_CPUID", 2010-05-19). It has been more than 10 years, so remove the fallback code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30bios-tables-test: Remove kernel-irqchip=off optionEduardo Habkost1-2/+1
We don't need to use kernel-irqchip=off for irq0 override if IRQ routing is supported by the host, which is the case since 2009 (IRQ routing was added to KVM in Linux v2.6.30). This is a more straightforward fix for Launchpad bug #1896263, as it doesn't require increasing the complexity of the MSR code. kernel-irqchip=off is for debugging only and there's no need to increase the complexity of the code just to work around an issue that was already fixed in the kernel. Fixes: https://bugs.launchpad.net/bugs/1896263 Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200922194732.2100510-1-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: always create kvmclock deviceVitaly Kuznetsov9-8/+27
QEMU's kvmclock device is only created when KVM PV feature bits for kvmclock (KVM_FEATURE_CLOCKSOURCE/KVM_FEATURE_CLOCKSOURCE2) are exposed to the guest. With 'kvm=off' cpu flag the device is not created and we don't call KVM_GET_CLOCK/KVM_SET_CLOCK upon migration. It was reported that without these call at least Hyper-V TSC page clocksouce (which can be enabled independently) gets broken after migration. Switch to creating kvmclock QEMU device unconditionally, it seems to always make sense to call KVM_GET_CLOCK/KVM_SET_CLOCK on migration. Use KVM_CAP_ADJUST_CLOCK check instead of CPUID feature bits. Reported-by: Antoine Damhet <antoine.damhet@blade-group.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200922151934.899555-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30target/i386: Fix VM migration when interrupt based APF is enabledVitaly Kuznetsov1-6/+6
VM with interrupt based APF enabled fails to migrate: qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0xf3 We have two issues: 1) There is a typo in kvm_put_msrs() and we write async_pf_int_msr to MSR_KVM_ASYNC_PF_EN (instead of MSR_KVM_ASYNC_PF_INT) 2) We restore MSR_KVM_ASYNC_PF_EN before MSR_KVM_ASYNC_PF_INT is set and this violates the check in KVM. Re-order MSR_KVM_ASYNC_PF_EN/MSR_KVM_ASYNC_PF_INT setting (and kvm_get_msrs() for consistency) and fix the typo. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200917102316.814804-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30helper_syscall x86_64: clear exception_is_intDouglas Crosher1-0/+1
The exception_is_int flag may be set on entry to helper_syscall, e.g. after a prior interrupt that has returned, and processing EXCP_SYSCALL as an interrupt causes it to fail so clear this flag. Signed-off-by: Douglas Crosher <dtc-ubuntu@scieneer.com> Message-Id: <a7dab33e-eda6-f988-52e9-f3d32db7538d@scieneer.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30checkpatch: Detect '%#' or '%0#' in printf-style format stringsDov Murik1-2/+8
According to the coding style document, we should use literal '0x' prefix instead of printf's '#' flag (which appears as '%#' or '%0#' in the format string). Add a checkpatch rule to enforce that. Note that checkpatch already had a similar rule for trace-events files. Example usage: $ scripts/checkpatch.pl --file chardev/baum.c ... ERROR: Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead #366: FILE: chardev/baum.c:366: + DPRINTF("Broken packet %#2x, tossing\n", req); \ ... ERROR: Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead #472: FILE: chardev/baum.c:472: + DPRINTF("unrecognized request %0#2x\n", req); ... Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com> Message-Id: <20200914172623.72955-1-dovmurik@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-09-30typedefs: Restrict PCMachineState to 'hw/i386/pc.h'Philippe Mathieu-Daudé2-3/+2
The PCMachineState type is only used under hw/i386/. We don't need to forward-declare it for all architectures, restrict it to the X86 one. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-7-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/xen: Split x86-specific declaration from generic hardware onesPhilippe Mathieu-Daudé5-3/+18
xen_hvm_init() is restricted to the X86 architecture. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-6-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30stubs: Split accelerator / hardware related stubsPhilippe Mathieu-Daudé4-40/+52
Move hardware stubs unrelated from the accelerator to xen-hw-stub.c. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-5-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30sysemu/xen: Add missing 'exec/cpu-common.h' header for ram_addr_t typePhilippe Mathieu-Daudé1-0/+2
As this header use the ram_addr_t type, it has to include "exec/cpu-common.h" to avoid odd errors such: include/sysemu/xen.h:35:44: error: unknown type name 'ram_addr_t'; did you mean 'in_addr_t'? 35 | static inline void xen_hvm_modified_memory(ram_addr_t start, ram_addr_t length) | ^~~~~~~~~~ | in_addr_t Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-4-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/i386/xen: Rename X86/PC specific function as xen_hvm_init_pc()Philippe Mathieu-Daudé4-6/+6
xen_hvm_init() is only meanful to initialize a X86/PC machine, rename it as xen_hvm_init_pc(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200908155530.249806-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30docs: Move object.h overview doc comment to qom.rstPaolo Bonzini2-377/+373
Move the whole contents of the overview doc comment from object.h to qom.rst. This makes the documentation source easier to read and edit, and also solves the backslash escaping issue at the typecasting macro examples. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-10-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30docs: Create docs/devel/qom.rstEduardo Habkost2-0/+6
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-9-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Add code block markup to all code blocksEduardo Habkost1-79/+56
Convert all example/codelisting markup to Sphinx code-block. There are a few sections where backslashes at the end of lines break code formatting. A comment was added noting that this is an issue. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-8-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Indent existing code examplesEduardo Habkost1-188/+188
This indents existing code examples that are not indented yet, just to make future conversion to Sphinx markup easier to review. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-7-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Reformat section titles using Sphinx syntaxEduardo Habkost1-4/+8
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-6-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Add kernel-doc markup to introduction doc commentEduardo Habkost1-3/+1
Add DOC: section keyword to introduction doc comment, so it will be rendered by kernel-doc. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-5-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Use ``code`` Sphinx syntax where appropriateEduardo Habkost1-3/+3
Replace gtkdoc markup with Sphinx ``code`` syntax. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-4-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Use kernel-doc private/public tags in structsEduardo Habkost1-3/+3
Use kernel-doc syntax for indicating private and public struct fields. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-3-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qom: Document all function parameters in doc commentsEduardo Habkost1-2/+45
kernel-doc requires all function parameters to be documented, so document them all. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200910221526.10041-2-ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30char: fix logging when chardev write failsDaniel P. Berrangé1-0/+13
The qemu_chr_write_buffer() method sends data to the chardev backend for writing, and then also writes to the log file. In case the chardev backend only writes part of the data buffer, we need to make sure we only log the same subset. qemu_chr_write_buffer() will be invoked again later to write the rest of the buffer. In the case the chardev backend returns an error though, no further attempts to likely to be made to write the data. We must therefore write the entire buffer to the log immediately. An example where this is important is with the socket backend. This will return -1 for all writes if no client is currently connected. We still wish to write data to the log file when no client is present though. This used to work because the chardev would return "len" to pretend it had written all data when no client is connected, but this changed to return an error in commit 271094474b65de1ad7aaf729938de3d9b9d0d36f Author: Dima Stepanov <dimastep@yandex-team.ru> Date: Thu May 28 12:11:18 2020 +0300 char-socket: return -1 in case of disconnect during tcp_chr_write and this broke the logging, resulting in all data being discarded when no client is present. Fixes: https://bugs.launchpad.net/qemu/+bug/1893691 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30smp: drop support for deprecated (invalid topologies)Igor Mammedov1-0/+13
it's was deprecated since 3.1 Support for invalid topologies is removed, the user must ensure that topologies described with -smp include all possible cpus, i.e. (sockets * cores * threads) == maxcpus or QEMU will exit with error. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Message-Id: <20200911133202.938754-1-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30tests/tcg: reinstate or replace desired parts of rules.makPaolo Bonzini2-3/+14
Commit 660f79309303d696531ffb394719dfab3e0c42c0 was a bit overzealous with respect to tests/tcg, which needed quiet-command and $(BUILD_DIR). Reinstate quiet-command, and replace $(BUILD_DIR) with just the current directory. Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30oss-fuzz: move linker arg to fix coverage-buildAlexander Bulekov1-7/+8
The order of the add_project_link_arguments calls impacts which arguments are placed between --start-group and --end-group. OSS-Fuzz coverage builds seem to just add these to CFLAGS: -fprofile-instr-generate -fcoverage-mapping pthread -Wl,--no-as-needed -Wl,-ldl -Wl,-lm Wno-unused-command-line-argument The -Wl,-ldl flag that is enough to shift the fork_fuzz.ld linker-script back into the linker group. Move the linker-script meson call before the other calls to make sure the flag is placed correctly. Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200909220516.614222-1-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30meson: fix installation of keymapsAnthony PERARD1-0/+2
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200918130354.1879275-1-anthony.perard@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30checkpatch: avoid error on cover letter filesStefano Garzarella1-1/+1
Running checkpatch on a directory that contains a cover letter reports this error: Checking /tmp/tmpbnngauy3/0000-cover-letter.patch... ERROR: Does not appear to be a unified-diff format patch total: 1 errors, 0 warnings, 0 lines checked Let's skip cover letter as it is already done in the Linux kernel commits 06330fc40e3f ("checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files") and a08ffbef4ab7 ("checkpatch: fix ignoring cover-letter logic"). Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200917170212.92672-1-sgarzare@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30exec: Remove MemoryRegion::global_locking fieldPhilippe Mathieu-Daudé4-23/+3
Last uses of memory_region_clear_global_locking() have been removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked") and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O path to TLB path"). Remove memory_region_clear_global_locking() and the now unused 'global_locking' field in MemoryRegion. Reported-by: Alexander Bulekov <alxndr@bu.edu> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200806150726.962-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30hw/i386/q35: Remove unreachable Xen code on Q35 machinePhilippe Mathieu-Daudé1-11/+2
Xen accelerator requires specific changes to a machine to be able to use it. See for example the 'Xen PC' machine configure its PCI bus calling pc_xen_hvm_init_pci(). There is no 'Xen Q35' machine declared. This code was probably added while introducing the Q35 machine, based on the existing PC machine (see commit df2d8b3ed4 "Introduce q35 pc based chipset emulator"). Remove the unreachable code to simplify this file. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200722082517.18708-1-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30configure: use a platform-neutral prefixPaolo Bonzini1-19/+11
Now that the installation is relocatable, there is no need to compile a Windows-format prefix into Win32 binaries. Instead, the prefix will only be used to compute installation-relative paths, and it can be any string. Drop the "Program Files" path completely: it is only usable on English versions of Windows; therefore, using the NSIS installer to get the "correct" path to the Program Files folder is recommended, and NSIS works just as well with any prefix. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30ui: relocate paths to icons and translationsPaolo Bonzini2-4/+15
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-30qga: relocate path to default configuration and hookPaolo Bonzini1-3/+5
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.1 at 2024-11-03 09:53:33 +0000