| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Power9/10 initialization code consists of a lot of logical OR of
various flag bits as supported by respective Power platform during its
initialization, most of which is duplicated and only selected bits are
added or removed as needed with each new platform support being added.
Remove the duplicate code and share using common macros.
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
[adityag: renamed many POWERPC_* flags to PPC_* flags, checkpatch fixes]
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 0cac0f1b964 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12 specific code with this patch.
While at it, also remove pre-3.0-migration hacks introduced for backward
compatibility which are now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 0cac0f1b964 marked pseries-2.12 machines as deprecated
with reasons mentioned in its commit log.
Removing pseries-2.12-sxxm specific code with this patch.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.11 specific code with this patch.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.10 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.9 specific code with this patch for now.
While at it, also remove the pre-2.10 migration hacks which now become
obsolete.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.8 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.7 specific code with this patch for now.
While at it, also remove pre-2.8-migration and pci/mmio hacks introduced
for backward compatibility.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.6 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.5 specific code with this patch for now.
Also drop sPAPRMachineClass::use_ohci_by_default which is now useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.4 specific code with this patch for now.
While at it, also remove SpaprMachineClass::dr_lmb_enabled which is
now turned useless.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.3 specific code with this patch for now.
While at it, also remove the dynamic-reconfiguration option which was
introduced to disable it by default for legacy machines until pseries-2.3.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.2 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Commit 1392617d3576 intended to tag pseries-2.1 - 2.11 machines as
deprecated with reasons mentioned in its commit log.
Removing pseries-2.1 specific code with this patch for now.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The BookE decrementer stops at 0, meaning that it won't decremented
towards "negative" values. However, the current logic is inverted: decr
is updated solely when the resulting value would be negative.
Signed-off-by: Clément Chigot <chigot@adacore.com>
Fixes: 8e0a5ac87800 ("hw/ppc: Avoid decrementer rounding errors")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
[1] deprecated -mpower8-vector, resulting in:
powerpc64-linux-gnu-gcc: warning: switch '-mpower8-vector' is no longer supported
qemu/tests/tcg/ppc64/vsx_f2i_nan.c:4:15: error: expected ';' before 'float'
4 | typedef vector float vsx_float32_vec_t;
| ^~~~~~
Use -mcpu=power8 instead. In order to properly verify that this works,
one needs a big-endian (the minimum supported CPU for 64-bit
little-endian is power8 anyway) GCC configured with --enable-checking
(see GCC commit e154242724b0 ("[RS6000] Don't pass -many to the
assembler").
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=109987
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
In this commit the following coverity scan defect has been fixed
CID 1558831: Resource leaks (RESOURCE_LEAK)
Variable "rsp_payload" going out of scope leaks the storage it
points to.
Cc: qemu-stable@nongnu.org
Fixes: Coverity CID 1558831
Signed-off-by: Chalapathi V <chalapathi.v@linux.ibm.com>
Fixes: b4cb930e40 ("hw/ssi: Extend SPI model")
[PMD: Rebased on previous commit (returning earlier)]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Return early to simplify next commit.
No logical change intended.
Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
pnv_spi_xfer_buffer_new() allocates %payload using g_malloc0(),
and pnv_spi_xfer_buffer_write_ptr() allocates %payload->data
using g_realloc(). Use the API equivalent g_free() to release
the buffers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
It is unfair to let the PowerNV SPI model to the SSI
maintainers. Also include the PowerNV ones.
Fixes: 29318db133 ("hw/ssi: Add SPI model")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The ADU LPC transfer-size field is 7 bits, but the supported sizes for
LPC access via ADU appear to be 1, 2, 4, 8. The data buffer could
overrun if firmware set an invalid size field, so add checks to reject
them with a message.
Cc: qemu-stable@nongnu.org
Reported-by: Cédric Le Goater <clg@redhat.com>
Resolves: Coverity CID 1558830
Fixes: 24bd283bccb33 ("ppc/pnv: Implement ADU access to LPC space")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Hash virtual real mode addressing is defined by the architecture
to not perform virtual page class key protection checks.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The HFSCR defines were being encoded as bit masks, but the users
expect (and analogous FSCR defines are) bit numbers.
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Doorbell exceptions are not not cleared when they cause a wake from
powersave state, only when they take the corresponding interrupt.
The sreset-on-wake logic must avoid clearing the interrupt in this
case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
In Book-S / Power processors, the performance monitor interrupts are
driven by the MMCR0[PMAO] bit, which is level triggered and not cleared
by the interrupt.
Others may have different performance monitor architecture, but none of
those are implemented by QEMU.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
A typo in the loop over SMT threads to set irq level for doorbells
when storing to DPDES meant everything was aimed at the CPU executing
the instruction.
Cc: qemu-stable@nongnu.org
Fixes: d24e80b2ae ("target/ppc: Add msgsnd/p and DPDES SMT support")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
POWER8 does not have the ISA IRQ -> SERIRQ routing system of later
CPUs, instead all ISA IRQs are sent to the CPU via a single PSI
interrupt. There is a sanity check in the POWER8 case to ensure the
routing bits have not been set, because that would indicate a
programming error.
Those bits were incorrectly specified because of ppc bit numbering
fun. Coverity detected this as an always-zero expression.
Cc: qemu-stable@nongnu.org
Reported-by: Cédric Le Goater <clg@redhat.com>
Resolves: Coverity CID 1558829 (partially)
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The serirq routing table is split over two registers, the calculation
for the high irqs in the second register did not subtract the irq
offset. This was spotted by Coverity as a shift-by-negative. Fix this
and change the open-coded shifting and masking to use extract32()
function so it's less error-prone.
This went unnoticed because irqs >= 14 are not used in a standard
QEMU/OPAL boot, changing the first QEMU serial-isa irq to 14 to test
does demonstrate serial irqs aren't received, and that this change
fixes that.
Cc: qemu-stable@nongnu.org
Reported-by: Cédric Le Goater <clg@redhat.com>
Resolves: Coverity CID 1558829 (partially)
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
This is like commit 86e6202a57b1 ("target/ppc: Make divw[u] handler
method decodetree compatible."), but for gen_op_arith_divd().
Cc: qemu-stable@nongnu.org
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
divdu (without a dot) sometimes updates cr0, even though it shouldn't.
The reason is that gen_op_arith_divd() checks Rc(ctx->opcode), which is
not initialized. This field is initialized only for instructions that
go through decode_legacy(), and not decodetree.
There already was a similar issue fixed in commit 86e6202a57b1
("target/ppc: Make divw[u] handler method decodetree compatible.").
It's not immediately clear what else may access the uninitialized
ctx->opcode, so instead of playing whack-a-mole and changing the check
to compute_rc0, simply initialize ctx->opcode.
Cc: qemu-stable@nongnu.org
Fixes: 99082815f17f ("target/ppc: Add infrastructure for prefixed insns")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
This is SeaBIOS for the hppa architecture v17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The 'current_fpu' field is unused since commit f01be154589
("Move the active FPU registers into env again, and use more
TCG registers to access them").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241021151253.36443-1-philmd@linaro.org>
|
|
Similarly to commit 17c2c320f3c ("Introduce ase_mt_available helper"),
introduce the disas_mt_available() one which takes a DisasContext
argument to determine whether Multi-Threading is available by
checking the MT bit of the CP0_Config3 register.
Remove the then unused ASE_MT definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241024195447.44600-1-philmd@linaro.org>
|
|
Determine if the MIPS-3D ASE is implemented by checking
the state of the 3D bit in the FIR CP1 control register.
Remove the then unused ASE_MIPS3D definition.
Note, this allows using MIPS-3D on the mips64dspr2 model.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241021145832.34920-1-philmd@linaro.org>
|
|
Loongson fixed-point multiplies and divisions opcodes are
specific to 64-bit cores (Loongson-2 and Loongson-3 families).
Simplify by removing the 32-bit checks.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241026175349.84523-10-philmd@linaro.org>
|
|
Convert the following opcodes to decodetree:
- MULT.G - multiply 32-bit signed integers
- MULTU.G - multiply 32-bit unsigned integers
- DMULT.G - multiply 64-bit signed integers
- DMULTU.G - multiply 64-bit unsigned integers
Now that all opcodes from the extension have been converted, we
can remove completely gen_loongson_integer() and its 2 calls in
decode_opc_special2_legacy() and decode_opc_special3_legacy().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-9-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Convert the following opcodes to decodetree:
- MOD.G - mod 32-bit signed integers
- MODU.G - mod 32-bit unsigned integers
- DMOD.G - mod 64-bit signed integers
- DMODU.G - mod 64-bit unsigned integers
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-8-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Convert DIVU.G (divide 32-bit unsigned integers) and DDIVU.G
(divide 64-bit unsigned integers) opcodes to decodetree.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-7-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
DIV.G and DDIV.G are very similar. Provide gen_lext_DIV_G() a
'is_double' argument so it can generate DIV.G (divide 32-bit
signed integers).
With this commit we explicit the template used to generate
opcode for 32/64-bit word variants. Next commits will be less
verbose by providing both variants at once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-6-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Introduce decode_loongson() to decode all Loongson vendor
specific opcodes. Start converting a single opcode: DDIV.G
(divide 64-bit signed integers).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20241026175349.84523-5-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
There is no issue having multiple enum declarations with
the same value. As we are going to remove the OPC_MULT_G_2E
definition in few commits, restore the OPC_ADDUH_QB_DSP and
OPC_MUL_PH_DSP definitions and use them where they belong.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-4-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Since MULTU opcodes don't record the most significant bits
of the infinite result, sign-extending the sources make no
difference in the result.
Once we remove the sign extension of source registers, MULT
and MULTU are identical (as are DMULT and DMULTU).
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241026175349.84523-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Extract the decode_64bit_enabled() helper which detects
whether CPUs can run 64-bit instructions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241026175349.84523-2-philmd@linaro.org>
|
|
Enable MSA ASE for mips32r6-generic CPU.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Faraz Shahbazker <fshahbazker@wavecomp.com>
Signed-off-by: Aleksandar Rakic <aleksandar.rakic@htecgroup.com>
Reviewed-by: Aleksandar Rikalo <arikalo@gmail.com>
Message-ID: <AM9PR09MB485153B7CB706E188DED763484402@AM9PR09MB4851.eurprd09.prod.outlook.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Include CP0 MemoryMapID register in migration state.
Fixes: 99029be1c28 ("target/mips: Add implementation of GINVT instruction")
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Rakic <aleksandar.rakic@htecgroup.com>
Reviewed-by: Aleksandar Rikalo <arikalo@gmail.com>
Message-ID: <AM9PR09MB4851FB6034EDB7FA191BA47E84402@AM9PR09MB4851.eurprd09.prod.outlook.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
* target/i386: new feature bits for AMD processors
* target/i386/tcg: improvements around flag handling
* target/i386: add AVX10 support
* target/i386: add GraniteRapids-v2 model
* dockerfiles: add libcbor
* New nitro-enclave machine type
* qom: cleanups to object_new
* configure: detect 64-bit MIPS for rust
* configure: deprecate 32-bit MIPS
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcjvkQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPIKgf/etNpO2T+eLFtWN/Qd5eopBXqNd9k
# KmeK9EgW9lqx2IPGNen33O+uKpb/TsMmubSsSF+YxTp7pmkc8+71f3rBMaIAD02r
# /paHSMVw0+f12DAFQz1jdvGihR7Mew0wcF/UdEt737y6vEmPxLTyYG3Gfa4NSZwT
# /V5jTOIcfUN/UEjNgIp6NTuOEESKmlqt22pfMapgkwMlAJYeeJU2X9eGYE86wJbq
# ZSXNgK3jL9wGT2XKa3e+OKzHfFpSkrB0JbQbdico9pefnBokN/hTeeUJ81wBAc7u
# i00W1CEQVJ5lhBc121d4AWMp83ME6HijJUOTMmJbFIONPsITFPHK1CAkng==
# =D4nR
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 31 Oct 2024 17:28:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream-i386' of https://gitlab.com/bonzini/qemu: (49 commits)
target/i386: Introduce GraniteRapids-v2 model
target/i386: Add AVX512 state when AVX10 is supported
target/i386: Add feature dependencies for AVX10
target/i386: add CPUID.24 features for AVX10
target/i386: add AVX10 feature and AVX10 version property
target/i386: return bool from x86_cpu_filter_features
target/i386: do not rely on ExtSaveArea for accelerator-supported XCR0 bits
target/i386: cpu: set correct supported XCR0 features for TCG
target/i386: use + to put flags together
target/i386: use higher-precision arithmetic to compute CF
target/i386: use compiler builtin to compute PF
target/i386: make flag variables unsigned
target/i386: add a note about gen_jcc1
target/i386: add a few more trivial CCPrepare cases
target/i386: optimize TEST+Jxx sequences
target/i386: optimize computation of ZF from CC_OP_DYNAMIC
target/i386: Wrap cc_op_live with a validity check
target/i386: Introduce cc_op_size
target/i386: Rearrange CCOp
target/i386: remove CC_OP_CLR
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
With pv steal time supported, VM machine needs get physical address
of each vcpu and notify new host during migration. Here two
functions kvm_get_stealtime/kvm_set_stealtime, and guest steal time
physical address is only updated on KVM_PUT_FULL_STATE stage.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240930064040.753929-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
When we run “qemu-system-loongarch64 -qmp stdio -vnc none -S”,
we get an error message “Need kernel filename” and then we can't use qmp cmd to query some information.
So, we just throw a warning and then the cpus starts running from address VIRT_FLASH0_BASE.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241030012359.4040817-1-gaosong@loongson.cn>
|
|
update linux-headers to v6.12-rc5. Pass to compile on aarch64, arm,
loongarch64, x86_64, i386, riscv64,riscv32 softmmu and linux-user.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20241028023809.1554405-4-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
KVM LBT supports on LoongArch depends on the linux-header file
kvm_para.h, add header file kvm_para.h here.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20241028023809.1554405-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
