aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-07-20device_tree: Add support for reading device tree propertiesPeter Maydell2-0/+34
Add support for reading device tree properties (both generic and single-cell ones) to QEMU's convenience wrapper layer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-07-20hw/arm_boot.c: Check for RAM sizes exceeding ATAGS capacityPeter Maydell1-0/+6
The legacy ATAGS format for passing information to the kernel only allows RAM sizes which fit in 32 bits; enforce this restriction rather than silently doing something weird. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-07-20hw/arm_boot.c: Consistently use ram_size from arm_boot_info structPeter Maydell1-2/+3
Clean up the mix of getting the RAM size from the global ram_size and from the ram_size field in the arm_boot_info structure, so that we always use the structure field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-07-20hw/arm_boot.c: Make ram_size a uint64_tPeter Maydell1-1/+1
Make the RAM size in arm_boot_info a uint64_t so it can express the larger RAM sizes that may be seen in LPAE systems. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
2012-07-20hw/pl011.c: Avoid crash on read when no chr backend presentPeter Maydell1-1/+3
Add a missing guard that meant we would segfault if the guest read UARTDR on a PL011 serial device which had no chr backend connected. (This didn't happen for Linux guests because Linux reads the flags register and doesn't try to read the UART if it's empty.) Reported-by: Christian Müller <christian.mueller@heig-vd.ch> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-07-19Revert "audio: Make PC speaker audio card available by default"Anthony Liguori1-2/+2
This reverts commit 504972922da9b562f15e13544d3efca84b46b8fd which broke the build for ARM. I don't think this change is necessary. If I'm wrong, please recommit this changeset with an appropriate fix for ARM. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-19audio: Make PC speaker audio card available by defaultJan Kiszka1-2/+2
[ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "KOI8-R" character set. ] [ Some special characters may be displayed incorrectly. ] Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: malc <av1474@comtv.ru>
2012-07-19Update simpletrace.py for new log formatHarsh Prateek Bora1-41/+75
Support new tracelog format for multiple arguments and strings. Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19Simpletrace v2: Support multiple arguments, strings.Harsh Prateek Bora3-120/+262
Existing simpletrace backend allows to trace at max 6 args and does not support strings. This newer tracelog format gets rid of fixed size records and therefore allows to trace variable number of args including strings. Sample trace with strings: v9fs_version 0.000 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L v9fs_version_return 6.705 tag=0xffff id=0x64 msize=0x2000 version=9P2000.L Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19monitor: remove unused do_info_traceHarsh Prateek Bora3-35/+0
Going forward with simpletrace v2 variable size trace records, we cannot have a generic function to print trace event info and therefore this interface becomes invalid. As per Stefan Hajnoczi: "This command is only available from the human monitor. It's not very useful because it historically hasn't been able to pretty-print events or show them in the right order (we use a ringbuffer but it prints them out from index 0). Therefore, I don't think we're under any obligation to keep this command around. No one has complained about it's limitations - I think this is a sign that no one has used it. I'd be okay with a patch that removes it." Ref: http://lists.gnu.org/archive/html/qemu-devel/2012-01/msg01268.html Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-19trace: added ability to comment out events in the listAlexey Kardashevskiy1-0/+3
It is convenient for debug to be able to switch on/off some events easily. The only possibility now is to remove event name from the file completely and type it again when we want it back. The patch adds '#' symbol handling as a comment specifier. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-18Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori39-697/+1325
* kwolf/for-anthony: (41 commits) fdc-test: Clean up a bit fdc-test: introduce test_relative_seek fdc: fix relative seek qemu-iotests: Valgrind support coroutine-ucontext: Help valgrind understand coroutines qemu-io: Fix memory leaks hw/block-common: Factor out fall back to legacy -drive cyls=... blockdev: Don't limit DriveInfo serial to 20 characters hw/block-common: Factor out fall back to legacy -drive serial=... hw/block-common: Move BlockConf & friends from block.h Relax IDE CHS limits from 16383,16,63 to 65535,16,255 blockdev: Drop redundant CHS validation for if=ide hd-geometry: Compute BIOS CHS translation in one place qtest: Test we don't put hard disk info into CMOS for a CD-ROM ide pc: Put hard disk info into CMOS only for hard disks block: Geometry and translation hints are now useless, purge them qtest: Cover qdev property for BIOS CHS translation ide: qdev property for BIOS CHS translation qdev: New property type chs-translation qdev: Collect private helpers in one place ...
2012-07-18Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori22-142/+230
* qemu-kvm/uq/master: virtio: move common irqfd handling out of virtio-pci virtio: move common ioeventfd handling out of virtio-pci event_notifier: add event_notifier_set_handler memory: pass EventNotifier, not eventfd ivshmem: wrap ivshmem_del_eventfd loops with transaction ivshmem: use EventNotifier and memory API event_notifier: add event_notifier_init_fd event_notifier: remove event_notifier_test event_notifier: add event_notifier_set apic: Defer interrupt updates to VCPU thread apic: Reevaluate pending interrupts on LVT_LINT0 changes apic: Resolve potential endless loop around apic_update_irq kvm: expose tsc deadline timer feature to guest kvm_pv_eoi: add flag support kvm: Don't abort on kvm_irqchip_add_msi_route()
2012-07-18Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori7-42/+99
* qmp/queue/qmp: qapi: Convert getfd and closefd qapi: input_type_enum(): fix error message qmp: dump-guest-memory: improve schema doc
2012-07-18Merge remote-tracking branch 'kraxel/bios.2' into stagingAnthony Liguori6-0/+38
* kraxel/bios.2: Add vgabios build rules to roms/Makefile
2012-07-18Merge remote-tracking branch 'kraxel/usb.57' into stagingAnthony Liguori8-34/+909
* kraxel/usb.57: ehci: improve expire time calculation ehci: implement Interrupt Threshold Control support ehci: raise irq in the frame timer uhci: initialize expire_time when loading v1 vmstate usb: add usb attached scsi emulation scsi: add free_request callback
2012-07-17build: fix build breakage due to bad mergeAnthony Liguori1-7/+4
34bb443ee74df3780d86044dbf6492eb798c5807 broke the build but in a subtle way. The patch on the ML was actually based on the 1.1.1 stable branch (accidentally). When I merged it from the ML, the fuzzing got resolved in a such a way that the newly introduced Makefile dependency on GENERATED_HEADERS got lost (that was not in 1.1.1). The dist bits also got duplicated (but this is just cosmetic). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17build: add make dist target (v2)Anthony Liguori2-15/+39
Let's stop screwing up releases by having a script do the work that Anthony's fat fingers can't seem to get right. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Fix set_password and expire_password descriptionMichal Novotny1-2/+15
The description for set_password and expire_password commands is incomplete. This patch fixes the man page that is being generated to match the real behaviour of these functions. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Improve -nodefaults descriptionMichal Novotny1-1/+4
This patch improves the description of -nodefaults QEMU command line option by adding more information what is being disabled using this command. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17qemu-options.hx: Improve -{read|write}config options descriptionMichal Novotny1-2/+6
This is the patch to improve description for -{read|write}config functions. Signed-off-by: Michal Novotny <minovotn@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17constify value pointer for qdev_prop_set_stringChristian Borntraeger2-2/+2
qdev_prop_set_string uses object_property_set_str, which takes a const char * for the value. Lets propagate the constness into qdev_prop_set_string. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17doc: Fix indefinite article an -> a before nouns that begin with 'h'Stefan Weil2-2/+2
Although the rule also allows 'an' for historical reasons, 'a' is more common because 'h' is pronounced. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-17fdc-test: Clean up a bitKevin Wolf1-16/+20
Readability of the test code has suffered as the test case evolved. This should improve it a bit again. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc-test: introduce test_relative_seekPavel Hrdina1-5/+41
Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17fdc: fix relative seekPavel Hrdina1-4/+6
Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qemu-iotests: Valgrind supportKevin Wolf2-0/+21
check -valgrind wraps all qemu-io calls with valgrind. This makes it a bit easier to debug problems that occur somewhere deep in a test case. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-17coroutine-ucontext: Help valgrind understand coroutinesKevin Wolf2-0/+48
valgrind tends to get confused and report false positives when you switch stacks and don't tell it about it. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2012-07-17qemu-io: Fix memory leaksKevin Wolf1-0/+4
Almost all callers of create_iovec() forgot to destroy the qiov when the request has completed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-17hw/block-common: Factor out fall back to legacy -drive cyls=...Markus Armbruster6-85/+62
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Don't limit DriveInfo serial to 20 charactersMarkus Armbruster4-10/+6
All current users (IDE, SCSI and virtio-blk) happen to share this 20 characters limit. Still, it should be left to device models. They already enforce their limits. They have to, as the DriveInfo limit only affects legacy -drive serial=..., not the qdev properties. usb-storage, which doesn't limit serial number length, also uses DriveInfo for -usbdevice. But that doesn't provide access to DriveInfo serial. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hw/block-common: Factor out fall back to legacy -drive serial=...Markus Armbruster7-33/+34
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hw/block-common: Move BlockConf & friends from block.hMarkus Armbruster7-48/+48
This stuff doesn't belong to block layer, and was put there only because a better home didn't exist then. Now it does. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17Relax IDE CHS limits from 16383,16,63 to 65535,16,255Markus Armbruster1-4/+4
New limits straight from ATA4 6.2 Register delivered data transfer command sector addressing. I figure the old sector limit 63 was blindly copied from the BIOS int 13 limit. Doesn't apply to the hardware. No idea where the old cylinder limit comes from. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Drop redundant CHS validation for if=ideMarkus Armbruster1-3/+3
Leave it to ide_init_drive(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Compute BIOS CHS translation in one placeMarkus Armbruster5-16/+18
Currently, it is split between hd_geometry_guess() and pc_cmos_init_late(). Confusing. info qtree shows the result of the former. Also confusing. Fold the part done in pc_cmos_init_late() into hd_geometry_guess(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Test we don't put hard disk info into CMOS for a CD-ROMMarkus Armbruster1-0/+22
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide pc: Put hard disk info into CMOS only for hard disksMarkus Armbruster1-1/+1
In particular, don't set disk type and geometry when a CD-ROM on bus ide.0 has media during CMOS initialization. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17block: Geometry and translation hints are now useless, purge themMarkus Armbruster9-77/+12
There are two producers of these hints: drive_init() on behalf of -drive, and hd_geometry_guess(). The only consumer of the hint is hd_geometry_guess(). The callers of hd_geometry_guess() call it only when drive_init() didn't set the hints. Therefore, drive_init()'s hints are never used. Thus, hd_geometry_guess() only ever sees hints it produced itself in a prior call. Only the first call computes something, subsequent calls just repeat the first call's results. However, hd_geometry_guess() is never called more than once: the device models don't, and the block device is destroyed on unplug. Thus, dropping the repeat feature doesn't break anything now. If a block device wasn't destroyed on unplug and could be reused with a new device, then repeating old results would be wrong. Thus, dropping the repeat feature prevents future breakage. This renders the hints unused. Purge them from the block layer. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Cover qdev property for BIOS CHS translationMarkus Armbruster1-6/+7
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev property for BIOS CHS translationMarkus Armbruster2-5/+6
This isn't quite orthodox. CHS translation is firmware configuration, communicated via the RTC's CMOS RAM, not a property of the disk. But it's best to treat it just like geometry anyway. Maintain backward compatibility exactly like for geometry: fall back to DriveInfo's translation, set with -drive trans=... Bonus: info qtree now shows the translation. Except when it shows "auto": that's resolved by pc_cmos_init_late(). To be addressed shortly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: New property type chs-translationMarkus Armbruster2-0/+18
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: Collect private helpers in one placeMarkus Armbruster1-72/+72
Just code motion, with one long line wrapped to keep checkpatch.pl happy. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qtest: Cover qdev properties for disk geometryMarkus Armbruster1-2/+4
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17ide: qdev properties for disk geometryMarkus Armbruster3-7/+38
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a geometry. Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17virtio-blk: qdev properties for disk geometryMarkus Armbruster3-9/+34
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17scsi-hd: qdev properties for disk geometryMarkus Armbruster1-23/+46
Geometry needs to be qdev properties, because it belongs to the disk's guest part. Maintain backward compatibility exactly like for serial: fall back to DriveInfo's geometry, set with -drive cyls=... Do this only for scsi-hd. scsi-disk is legacy. scsi-cd doesn't have a geometry. scsi-block should get geometry from the host disk. Bonus: info qtree now shows the geometry. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17hd-geometry: Switch to uint32_t to match BlockConfMarkus Armbruster6-7/+7
Best to use the same type, to avoid unwanted truncation or sign extension. BlockConf can't use plain int for cyls, heads and secs, because integer properties require an exact width. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17qdev: Introduce block geometry propertiesMarkus Armbruster1-1/+7
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17blockdev: Save geometry in DriveInfoMarkus Armbruster2-0/+5
In preparation of purging it from the block layer, which will happen later in this series. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.1 at 2024-08-23 19:18:04 +0000