diff options
Diffstat (limited to 'qerror.c')
| -rw-r--r-- | qerror.c | 276 |
1 files changed, 138 insertions, 138 deletions
@@ -44,285 +44,285 @@ static const QType qerror_type = { */ static const QErrorStringTable qerror_table[] = { { - .error_fmt = QERR_ADD_CLIENT_FAILED, - .desc = "Could not add client", + QERR_ADD_CLIENT_FAILED, + "Could not add client", }, { - .error_fmt = QERR_AMBIGUOUS_PATH, - .desc = "Path '%(path)' does not uniquely identify an object" + QERR_AMBIGUOUS_PATH, + "Path '%(path)' does not uniquely identify an object" }, { - .error_fmt = QERR_BAD_BUS_FOR_DEVICE, - .desc = "Device '%(device)' can't go on a %(bad_bus_type) bus", + QERR_BAD_BUS_FOR_DEVICE, + "Device '%(device)' can't go on a %(bad_bus_type) bus", }, { - .error_fmt = QERR_BASE_NOT_FOUND, - .desc = "Base '%(base)' not found", + QERR_BASE_NOT_FOUND, + "Base '%(base)' not found", }, { - .error_fmt = QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED, - .desc = "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'", + QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED, + "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'", }, { - .error_fmt = QERR_BUS_NO_HOTPLUG, - .desc = "Bus '%(bus)' does not support hotplugging", + QERR_BUS_NO_HOTPLUG, + "Bus '%(bus)' does not support hotplugging", }, { - .error_fmt = QERR_BUS_NOT_FOUND, - .desc = "Bus '%(bus)' not found", + QERR_BUS_NOT_FOUND, + "Bus '%(bus)' not found", }, { - .error_fmt = QERR_COMMAND_DISABLED, - .desc = "The command %(name) has been disabled for this instance", + QERR_COMMAND_DISABLED, + "The command %(name) has been disabled for this instance", }, { - .error_fmt = QERR_COMMAND_NOT_FOUND, - .desc = "The command %(name) has not been found", + QERR_COMMAND_NOT_FOUND, + "The command %(name) has not been found", }, { - .error_fmt = QERR_DEVICE_ENCRYPTED, - .desc = "'%(device)' (%(filename)) is encrypted", + QERR_DEVICE_ENCRYPTED, + "'%(device)' (%(filename)) is encrypted", }, { - .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION, - .desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'", + QERR_DEVICE_FEATURE_BLOCKS_MIGRATION, + "Migration is disabled when using feature '%(feature)' in device '%(device)'", }, { - .error_fmt = QERR_DEVICE_HAS_NO_MEDIUM, - .desc = "Device '%(device)' has no medium", + QERR_DEVICE_HAS_NO_MEDIUM, + "Device '%(device)' has no medium", }, { - .error_fmt = QERR_DEVICE_INIT_FAILED, - .desc = "Device '%(device)' could not be initialized", + QERR_DEVICE_INIT_FAILED, + "Device '%(device)' could not be initialized", }, { - .error_fmt = QERR_DEVICE_IN_USE, - .desc = "Device '%(device)' is in use", + QERR_DEVICE_IN_USE, + "Device '%(device)' is in use", }, { - .error_fmt = QERR_DEVICE_IS_READ_ONLY, - .desc = "Device '%(device)' is read only", + QERR_DEVICE_IS_READ_ONLY, + "Device '%(device)' is read only", }, { - .error_fmt = QERR_DEVICE_LOCKED, - .desc = "Device '%(device)' is locked", + QERR_DEVICE_LOCKED, + "Device '%(device)' is locked", }, { - .error_fmt = QERR_DEVICE_MULTIPLE_BUSSES, - .desc = "Device '%(device)' has multiple child busses", + QERR_DEVICE_MULTIPLE_BUSSES, + "Device '%(device)' has multiple child busses", }, { - .error_fmt = QERR_DEVICE_NO_BUS, - .desc = "Device '%(device)' has no child bus", + QERR_DEVICE_NO_BUS, + "Device '%(device)' has no child bus", }, { - .error_fmt = QERR_DEVICE_NO_HOTPLUG, - .desc = "Device '%(device)' does not support hotplugging", + QERR_DEVICE_NO_HOTPLUG, + "Device '%(device)' does not support hotplugging", }, { - .error_fmt = QERR_DEVICE_NOT_ACTIVE, - .desc = "Device '%(device)' has not been activated", + QERR_DEVICE_NOT_ACTIVE, + "Device '%(device)' has not been activated", }, { - .error_fmt = QERR_DEVICE_NOT_ENCRYPTED, - .desc = "Device '%(device)' is not encrypted", + QERR_DEVICE_NOT_ENCRYPTED, + "Device '%(device)' is not encrypted", }, { - .error_fmt = QERR_DEVICE_NOT_FOUND, - .desc = "Device '%(device)' not found", + QERR_DEVICE_NOT_FOUND, + "Device '%(device)' not found", }, { - .error_fmt = QERR_DEVICE_NOT_REMOVABLE, - .desc = "Device '%(device)' is not removable", + QERR_DEVICE_NOT_REMOVABLE, + "Device '%(device)' is not removable", }, { - .error_fmt = QERR_DUPLICATE_ID, - .desc = "Duplicate ID '%(id)' for %(object)", + QERR_DUPLICATE_ID, + "Duplicate ID '%(id)' for %(object)", }, { - .error_fmt = QERR_FD_NOT_FOUND, - .desc = "File descriptor named '%(name)' not found", + QERR_FD_NOT_FOUND, + "File descriptor named '%(name)' not found", }, { - .error_fmt = QERR_FD_NOT_SUPPLIED, - .desc = "No file descriptor supplied via SCM_RIGHTS", + QERR_FD_NOT_SUPPLIED, + "No file descriptor supplied via SCM_RIGHTS", }, { - .error_fmt = QERR_FEATURE_DISABLED, - .desc = "The feature '%(name)' is not enabled", + QERR_FEATURE_DISABLED, + "The feature '%(name)' is not enabled", }, { - .error_fmt = QERR_INVALID_BLOCK_FORMAT, - .desc = "Invalid block format '%(name)'", + QERR_INVALID_BLOCK_FORMAT, + "Invalid block format '%(name)'", }, { - .error_fmt = QERR_INVALID_OPTION_GROUP, - .desc = "There is no option group '%(group)'", + QERR_INVALID_OPTION_GROUP, + "There is no option group '%(group)'", }, { - .error_fmt = QERR_INVALID_PARAMETER, - .desc = "Invalid parameter '%(name)'", + QERR_INVALID_PARAMETER, + "Invalid parameter '%(name)'", }, { - .error_fmt = QERR_INVALID_PARAMETER_COMBINATION, - .desc = "Invalid parameter combination", + QERR_INVALID_PARAMETER_COMBINATION, + "Invalid parameter combination", }, { - .error_fmt = QERR_INVALID_PARAMETER_TYPE, - .desc = "Invalid parameter type for '%(name)', expected: %(expected)", + QERR_INVALID_PARAMETER_TYPE, + "Invalid parameter type for '%(name)', expected: %(expected)", }, { - .error_fmt = QERR_INVALID_PARAMETER_VALUE, - .desc = "Parameter '%(name)' expects %(expected)", + QERR_INVALID_PARAMETER_VALUE, + "Parameter '%(name)' expects %(expected)", }, { - .error_fmt = QERR_INVALID_PASSWORD, - .desc = "Password incorrect", + QERR_INVALID_PASSWORD, + "Password incorrect", }, { - .error_fmt = QERR_IO_ERROR, - .desc = "An IO error has occurred", + QERR_IO_ERROR, + "An IO error has occurred", }, { - .error_fmt = QERR_JSON_PARSE_ERROR, - .desc = "JSON parse error, %(message)", + QERR_JSON_PARSE_ERROR, + "JSON parse error, %(message)", }, { - .error_fmt = QERR_JSON_PARSING, - .desc = "Invalid JSON syntax", + QERR_JSON_PARSING, + "Invalid JSON syntax", }, { - .error_fmt = QERR_KVM_MISSING_CAP, - .desc = "Using KVM without %(capability), %(feature) unavailable", + QERR_KVM_MISSING_CAP, + "Using KVM without %(capability), %(feature) unavailable", }, { - .error_fmt = QERR_MIGRATION_ACTIVE, - .desc = "There's a migration process in progress", + QERR_MIGRATION_ACTIVE, + "There's a migration process in progress", }, { - .error_fmt = QERR_MIGRATION_NOT_SUPPORTED, - .desc = "State blocked by non-migratable device '%(device)'", + QERR_MIGRATION_NOT_SUPPORTED, + "State blocked by non-migratable device '%(device)'", }, { - .error_fmt = QERR_MIGRATION_EXPECTED, - .desc = "An incoming migration is expected before this command can be executed", + QERR_MIGRATION_EXPECTED, + "An incoming migration is expected before this command can be executed", }, { - .error_fmt = QERR_MISSING_PARAMETER, - .desc = "Parameter '%(name)' is missing", + QERR_MISSING_PARAMETER, + "Parameter '%(name)' is missing", }, { - .error_fmt = QERR_NO_BUS_FOR_DEVICE, - .desc = "No '%(bus)' bus found for device '%(device)'", + QERR_NO_BUS_FOR_DEVICE, + "No '%(bus)' bus found for device '%(device)'", }, { - .error_fmt = QERR_NOT_SUPPORTED, - .desc = "Not supported", + QERR_NOT_SUPPORTED, + "Not supported", }, { - .error_fmt = QERR_OPEN_FILE_FAILED, - .desc = "Could not open '%(filename)'", + QERR_OPEN_FILE_FAILED, + "Could not open '%(filename)'", }, { - .error_fmt = QERR_PERMISSION_DENIED, - .desc = "Insufficient permission to perform this operation", + QERR_PERMISSION_DENIED, + "Insufficient permission to perform this operation", }, { - .error_fmt = QERR_PROPERTY_NOT_FOUND, - .desc = "Property '%(device).%(property)' not found", + QERR_PROPERTY_NOT_FOUND, + "Property '%(device).%(property)' not found", }, { - .error_fmt = QERR_PROPERTY_VALUE_BAD, - .desc = "Property '%(device).%(property)' doesn't take value '%(value)'", + QERR_PROPERTY_VALUE_BAD, + "Property '%(device).%(property)' doesn't take value '%(value)'", }, { - .error_fmt = QERR_PROPERTY_VALUE_IN_USE, - .desc = "Property '%(device).%(property)' can't take value '%(value)', it's in use", + QERR_PROPERTY_VALUE_IN_USE, + "Property '%(device).%(property)' can't take value '%(value)', it's in use", }, { - .error_fmt = QERR_PROPERTY_VALUE_NOT_FOUND, - .desc = "Property '%(device).%(property)' can't find value '%(value)'", + QERR_PROPERTY_VALUE_NOT_FOUND, + "Property '%(device).%(property)' can't find value '%(value)'", }, { - .error_fmt = QERR_PROPERTY_VALUE_NOT_POWER_OF_2, - .desc = "Property '%(device).%(property)' doesn't take " + QERR_PROPERTY_VALUE_NOT_POWER_OF_2, + "Property '%(device).%(property)' doesn't take " "value '%(value)', it's not a power of 2", }, { - .error_fmt = QERR_PROPERTY_VALUE_OUT_OF_RANGE, - .desc = "Property '%(device).%(property)' doesn't take " + QERR_PROPERTY_VALUE_OUT_OF_RANGE, + "Property '%(device).%(property)' doesn't take " "value %(value) (minimum: %(min), maximum: %(max))", }, { - .error_fmt = QERR_QGA_COMMAND_FAILED, - .desc = "Guest agent command failed, error was '%(message)'", + QERR_QGA_COMMAND_FAILED, + "Guest agent command failed, error was '%(message)'", }, { - .error_fmt = QERR_QGA_LOGGING_FAILED, - .desc = "Guest agent failed to log non-optional log statement", + QERR_QGA_LOGGING_FAILED, + "Guest agent failed to log non-optional log statement", }, { - .error_fmt = QERR_QMP_BAD_INPUT_OBJECT, - .desc = "Expected '%(expected)' in QMP input", + QERR_QMP_BAD_INPUT_OBJECT, + "Expected '%(expected)' in QMP input", }, { - .error_fmt = QERR_QMP_BAD_INPUT_OBJECT_MEMBER, - .desc = "QMP input object member '%(member)' expects '%(expected)'", + QERR_QMP_BAD_INPUT_OBJECT_MEMBER, + "QMP input object member '%(member)' expects '%(expected)'", }, { - .error_fmt = QERR_QMP_EXTRA_MEMBER, - .desc = "QMP input object member '%(member)' is unexpected", + QERR_QMP_EXTRA_MEMBER, + "QMP input object member '%(member)' is unexpected", }, { - .error_fmt = QERR_RESET_REQUIRED, - .desc = "Resetting the Virtual Machine is required", + QERR_RESET_REQUIRED, + "Resetting the Virtual Machine is required", }, { - .error_fmt = QERR_SET_PASSWD_FAILED, - .desc = "Could not set password", + QERR_SET_PASSWD_FAILED, + "Could not set password", }, { - .error_fmt = QERR_TOO_MANY_FILES, - .desc = "Too many open files", + QERR_TOO_MANY_FILES, + "Too many open files", }, { - .error_fmt = QERR_UNDEFINED_ERROR, - .desc = "An undefined error has occurred", + QERR_UNDEFINED_ERROR, + "An undefined error has occurred", }, { - .error_fmt = QERR_UNKNOWN_BLOCK_FORMAT_FEATURE, - .desc = "'%(device)' uses a %(format) feature which is not " + QERR_UNKNOWN_BLOCK_FORMAT_FEATURE, + "'%(device)' uses a %(format) feature which is not " "supported by this qemu version: %(feature)", }, { - .error_fmt = QERR_UNSUPPORTED, - .desc = "this feature or command is not currently supported", + QERR_UNSUPPORTED, + "this feature or command is not currently supported", }, { - .error_fmt = QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION, - .desc = "Migration is disabled when VirtFS export path '%(path)' " + QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION, + "Migration is disabled when VirtFS export path '%(path)' " "is mounted in the guest using mount_tag '%(tag)'", }, { - .error_fmt = QERR_VNC_SERVER_FAILED, - .desc = "Could not start VNC server on %(target)", + QERR_VNC_SERVER_FAILED, + "Could not start VNC server on %(target)", }, { - .error_fmt = QERR_SOCKET_CONNECT_FAILED, - .desc = "Failed to connect to socket", + QERR_SOCKET_CONNECT_FAILED, + "Failed to connect to socket", }, { - .error_fmt = QERR_SOCKET_LISTEN_FAILED, - .desc = "Failed to set socket to listening mode", + QERR_SOCKET_LISTEN_FAILED, + "Failed to set socket to listening mode", }, { - .error_fmt = QERR_SOCKET_BIND_FAILED, - .desc = "Failed to bind socket", + QERR_SOCKET_BIND_FAILED, + "Failed to bind socket", }, { - .error_fmt = QERR_SOCKET_CREATE_FAILED, - .desc = "Failed to create socket", + QERR_SOCKET_CREATE_FAILED, + "Failed to create socket", }, {} }; |