diff options
Diffstat (limited to 'include/standard-headers')
| -rw-r--r-- | include/standard-headers/drm/drm_fourcc.h | 121 | ||||
| -rw-r--r-- | include/standard-headers/linux/ethtool.h | 31 | ||||
| -rw-r--r-- | include/standard-headers/linux/fuse.h | 10 | ||||
| -rw-r--r-- | include/standard-headers/linux/pci_regs.h | 6 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_gpu.h | 18 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_ids.h | 24 | ||||
| -rw-r--r-- | include/standard-headers/linux/virtio_vsock.h | 3 |
7 files changed, 205 insertions, 8 deletions
diff --git a/include/standard-headers/drm/drm_fourcc.h b/include/standard-headers/drm/drm_fourcc.h index 352b51f..2c025cb 100644 --- a/include/standard-headers/drm/drm_fourcc.h +++ b/include/standard-headers/drm/drm_fourcc.h @@ -103,6 +103,12 @@ extern "C" { /* 8 bpp Red */ #define DRM_FORMAT_R8 fourcc_code('R', '8', ' ', ' ') /* [7:0] R */ +/* 10 bpp Red */ +#define DRM_FORMAT_R10 fourcc_code('R', '1', '0', ' ') /* [15:0] x:R 6:10 little endian */ + +/* 12 bpp Red */ +#define DRM_FORMAT_R12 fourcc_code('R', '1', '2', ' ') /* [15:0] x:R 4:12 little endian */ + /* 16 bpp Red */ #define DRM_FORMAT_R16 fourcc_code('R', '1', '6', ' ') /* [15:0] R little endian */ @@ -372,6 +378,12 @@ extern "C" { #define DRM_FORMAT_RESERVED ((1ULL << 56) - 1) +#define fourcc_mod_get_vendor(modifier) \ + (((modifier) >> 56) & 0xff) + +#define fourcc_mod_is_vendor(modifier, vendor) \ + (fourcc_mod_get_vendor(modifier) == DRM_FORMAT_MOD_VENDOR_## vendor) + #define fourcc_mod_code(vendor, val) \ ((((uint64_t)DRM_FORMAT_MOD_VENDOR_## vendor) << 56) | ((val) & 0x00ffffffffffffffULL)) @@ -899,9 +911,9 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) /* * The top 4 bits (out of the 56 bits alloted for specifying vendor specific - * modifiers) denote the category for modifiers. Currently we have only two - * categories of modifiers ie AFBC and MISC. We can have a maximum of sixteen - * different categories. + * modifiers) denote the category for modifiers. Currently we have three + * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of + * sixteen different categories. */ #define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \ fourcc_mod_code(ARM, ((uint64_t)(__type) << 52) | ((__val) & 0x000fffffffffffffULL)) @@ -1017,6 +1029,109 @@ drm_fourcc_canonicalize_nvidia_format_mod(uint64_t modifier) #define AFBC_FORMAT_MOD_USM (1ULL << 12) /* + * Arm Fixed-Rate Compression (AFRC) modifiers + * + * AFRC is a proprietary fixed rate image compression protocol and format, + * designed to provide guaranteed bandwidth and memory footprint + * reductions in graphics and media use-cases. + * + * AFRC buffers consist of one or more planes, with the same components + * and meaning as an uncompressed buffer using the same pixel format. + * + * Within each plane, the pixel/luma/chroma values are grouped into + * "coding unit" blocks which are individually compressed to a + * fixed size (in bytes). All coding units within a given plane of a buffer + * store the same number of values, and have the same compressed size. + * + * The coding unit size is configurable, allowing different rates of compression. + * + * The start of each AFRC buffer plane must be aligned to an alignment granule which + * depends on the coding unit size. + * + * Coding Unit Size Plane Alignment + * ---------------- --------------- + * 16 bytes 1024 bytes + * 24 bytes 512 bytes + * 32 bytes 2048 bytes + * + * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned + * to a multiple of the paging tile dimensions. + * The dimensions of each paging tile depend on whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Layout Paging Tile Width Paging Tile Height + * ------ ----------------- ------------------ + * SCAN 16 coding units 4 coding units + * ROT 8 coding units 8 coding units + * + * The dimensions of each coding unit depend on the number of components + * in the compressed plane and whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Number of Components in Plane Layout Coding Unit Width Coding Unit Height + * ----------------------------- --------- ----------------- ------------------ + * 1 SCAN 16 samples 4 samples + * Example: 16x4 luma samples in a 'Y' plane + * 16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 1 ROT 8 samples 8 samples + * Example: 8x8 luma samples in a 'Y' plane + * 8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 2 DONT CARE 8 samples 4 samples + * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 3 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer without alpha + * ----------------------------- --------- ----------------- ------------------ + * 4 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer with alpha + */ + +#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02 + +#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \ + DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode) + +/* + * AFRC coding unit size modifier. + * + * Indicates the number of bytes used to store each compressed coding unit for + * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance + * is the same for both Cb and Cr, which may be stored in separate planes. + * + * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store + * each compressed coding unit in the first plane of the buffer. For RGBA buffers + * this is the only plane, while for semi-planar and fully-planar YUV buffers, + * this corresponds to the luma plane. + * + * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store + * each compressed coding unit in the second and third planes in the buffer. + * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s). + * + * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified + * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero. + * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and + * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified. + */ +#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf +#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL) + +#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size) +#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4) + +/* + * AFRC scanline memory layout. + * + * Indicates if the buffer uses the scanline-optimised layout + * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout. + * The memory layout is the same for all planes. + */ +#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8) + +/* * Arm 16x16 Block U-Interleaved modifier * * This is used by Arm Mali Utgard and Midgard GPUs. It divides the image diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index 053d3fa..688eb8d 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -603,6 +603,7 @@ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE, ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED, ETHTOOL_LINK_EXT_STATE_OVERHEAT, + ETHTOOL_LINK_EXT_STATE_MODULE, }; /* More information in addition to ETHTOOL_LINK_EXT_STATE_AUTONEG. */ @@ -639,6 +640,8 @@ enum ethtool_link_ext_substate_link_logical_mismatch { enum ethtool_link_ext_substate_bad_signal_integrity { ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS = 1, ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST, + ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS, }; /* More information in addition to ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE. */ @@ -647,6 +650,11 @@ enum ethtool_link_ext_substate_cable_issue { ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE, }; +/* More information in addition to ETHTOOL_LINK_EXT_STATE_MODULE. */ +enum ethtool_link_ext_substate_module { + ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY = 1, +}; + #define ETH_GSTRING_LEN 32 /** @@ -705,6 +713,29 @@ enum ethtool_stringset { }; /** + * enum ethtool_module_power_mode_policy - plug-in module power mode policy + * @ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode. + * @ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host + * to high power mode when the first port using it is put administratively + * up and to low power mode when the last port using it is put + * administratively down. + */ +enum ethtool_module_power_mode_policy { + ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH = 1, + ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO, +}; + +/** + * enum ethtool_module_power_mode - plug-in module power mode + * @ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode. + * @ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode. + */ +enum ethtool_module_power_mode { + ETHTOOL_MODULE_POWER_MODE_LOW = 1, + ETHTOOL_MODULE_POWER_MODE_HIGH, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset diff --git a/include/standard-headers/linux/fuse.h b/include/standard-headers/linux/fuse.h index cce105b..23ea317 100644 --- a/include/standard-headers/linux/fuse.h +++ b/include/standard-headers/linux/fuse.h @@ -181,6 +181,9 @@ * - add FUSE_OPEN_KILL_SUIDGID * - extend fuse_setxattr_in, add FUSE_SETXATTR_EXT * - add FUSE_SETXATTR_ACL_KILL_SGID + * + * 7.34 + * - add FUSE_SYNCFS */ #ifndef _LINUX_FUSE_H @@ -212,7 +215,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 33 +#define FUSE_KERNEL_MINOR_VERSION 34 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -505,6 +508,7 @@ enum fuse_opcode { FUSE_COPY_FILE_RANGE = 47, FUSE_SETUPMAPPING = 48, FUSE_REMOVEMAPPING = 49, + FUSE_SYNCFS = 50, /* CUSE specific operations */ CUSE_INIT = 4096, @@ -967,4 +971,8 @@ struct fuse_removemapping_one { #define FUSE_REMOVEMAPPING_MAX_ENTRY \ (PAGE_SIZE / sizeof(struct fuse_removemapping_one)) +struct fuse_syncfs_in { + uint64_t padding; +}; + #endif /* _LINUX_FUSE_H */ diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h index e709ae8..ff6ccbc 100644 --- a/include/standard-headers/linux/pci_regs.h +++ b/include/standard-headers/linux/pci_regs.h @@ -504,6 +504,12 @@ #define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ #define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ #define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_PAYLOAD_128B 0x0000 /* 128 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_256B 0x0020 /* 256 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_512B 0x0040 /* 512 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_1024B 0x0060 /* 1024 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_2048B 0x0080 /* 2048 Bytes */ +#define PCI_EXP_DEVCTL_PAYLOAD_4096B 0x00a0 /* 4096 Bytes */ #define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ #define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ #define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ diff --git a/include/standard-headers/linux/virtio_gpu.h b/include/standard-headers/linux/virtio_gpu.h index 1357e47..2da48d3 100644 --- a/include/standard-headers/linux/virtio_gpu.h +++ b/include/standard-headers/linux/virtio_gpu.h @@ -59,6 +59,11 @@ * VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB */ #define VIRTIO_GPU_F_RESOURCE_BLOB 3 +/* + * VIRTIO_GPU_CMD_CREATE_CONTEXT with + * context_init and multiple timelines + */ +#define VIRTIO_GPU_F_CONTEXT_INIT 4 enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, @@ -122,14 +127,20 @@ enum virtio_gpu_shm_id { VIRTIO_GPU_SHM_ID_HOST_VISIBLE = 1 }; -#define VIRTIO_GPU_FLAG_FENCE (1 << 0) +#define VIRTIO_GPU_FLAG_FENCE (1 << 0) +/* + * If the following flag is set, then ring_idx contains the index + * of the command ring that needs to used when creating the fence + */ +#define VIRTIO_GPU_FLAG_INFO_RING_IDX (1 << 1) struct virtio_gpu_ctrl_hdr { uint32_t type; uint32_t flags; uint64_t fence_id; uint32_t ctx_id; - uint32_t padding; + uint8_t ring_idx; + uint8_t padding[3]; }; /* data passed in the cursor vq */ @@ -269,10 +280,11 @@ struct virtio_gpu_resource_create_3d { }; /* VIRTIO_GPU_CMD_CTX_CREATE */ +#define VIRTIO_GPU_CONTEXT_INIT_CAPSET_ID_MASK 0x000000ff struct virtio_gpu_ctx_create { struct virtio_gpu_ctrl_hdr hdr; uint32_t nlen; - uint32_t padding; + uint32_t context_init; char debug_name[64]; }; diff --git a/include/standard-headers/linux/virtio_ids.h b/include/standard-headers/linux/virtio_ids.h index 4fe842c..80d76b7 100644 --- a/include/standard-headers/linux/virtio_ids.h +++ b/include/standard-headers/linux/virtio_ids.h @@ -54,7 +54,31 @@ #define VIRTIO_ID_SOUND 25 /* virtio sound */ #define VIRTIO_ID_FS 26 /* virtio filesystem */ #define VIRTIO_ID_PMEM 27 /* virtio pmem */ +#define VIRTIO_ID_RPMB 28 /* virtio rpmb */ #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ +#define VIRTIO_ID_VIDEO_ENCODER 30 /* virtio video encoder */ +#define VIRTIO_ID_VIDEO_DECODER 31 /* virtio video decoder */ +#define VIRTIO_ID_SCMI 32 /* virtio SCMI */ +#define VIRTIO_ID_NITRO_SEC_MOD 33 /* virtio nitro secure module*/ +#define VIRTIO_ID_I2C_ADAPTER 34 /* virtio i2c adapter */ +#define VIRTIO_ID_WATCHDOG 35 /* virtio watchdog */ +#define VIRTIO_ID_CAN 36 /* virtio can */ +#define VIRTIO_ID_DMABUF 37 /* virtio dmabuf */ +#define VIRTIO_ID_PARAM_SERV 38 /* virtio parameter server */ +#define VIRTIO_ID_AUDIO_POLICY 39 /* virtio audio policy */ #define VIRTIO_ID_BT 40 /* virtio bluetooth */ +#define VIRTIO_ID_GPIO 41 /* virtio gpio */ + +/* + * Virtio Transitional IDs + */ + +#define VIRTIO_TRANS_ID_NET 1000 /* transitional virtio net */ +#define VIRTIO_TRANS_ID_BLOCK 1001 /* transitional virtio block */ +#define VIRTIO_TRANS_ID_BALLOON 1002 /* transitional virtio balloon */ +#define VIRTIO_TRANS_ID_CONSOLE 1003 /* transitional virtio console */ +#define VIRTIO_TRANS_ID_SCSI 1004 /* transitional virtio SCSI */ +#define VIRTIO_TRANS_ID_RNG 1005 /* transitional virtio rng */ +#define VIRTIO_TRANS_ID_9P 1009 /* transitional virtio 9p console */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/standard-headers/linux/virtio_vsock.h b/include/standard-headers/linux/virtio_vsock.h index 3a23488..467e751 100644 --- a/include/standard-headers/linux/virtio_vsock.h +++ b/include/standard-headers/linux/virtio_vsock.h @@ -97,7 +97,8 @@ enum virtio_vsock_shutdown { /* VIRTIO_VSOCK_OP_RW flags values */ enum virtio_vsock_rw { - VIRTIO_VSOCK_SEQ_EOR = 1, + VIRTIO_VSOCK_SEQ_EOM = 1, + VIRTIO_VSOCK_SEQ_EOR = 2, }; #endif /* _LINUX_VIRTIO_VSOCK_H */ |