diff options
Diffstat (limited to 'include/standard-headers/linux/ethtool.h')
| -rw-r--r-- | include/standard-headers/linux/ethtool.h | 391 |
1 files changed, 326 insertions, 65 deletions
diff --git a/include/standard-headers/linux/ethtool.h b/include/standard-headers/linux/ethtool.h index b0b4b68..cef0d20 100644 --- a/include/standard-headers/linux/ethtool.h +++ b/include/standard-headers/linux/ethtool.h @@ -681,6 +681,8 @@ enum ethtool_link_ext_substate_module { * @ETH_SS_STATS_ETH_MAC: names of IEEE 802.3 MAC statistics * @ETH_SS_STATS_ETH_CTRL: names of IEEE 802.3 MAC Control statistics * @ETH_SS_STATS_RMON: names of RMON statistics + * @ETH_SS_STATS_PHY: names of PHY(dev) statistics + * @ETH_SS_TS_FLAGS: hardware timestamping flags * * @ETH_SS_COUNT: number of defined string sets */ @@ -706,6 +708,8 @@ enum ethtool_stringset { ETH_SS_STATS_ETH_MAC, ETH_SS_STATS_ETH_CTRL, ETH_SS_STATS_RMON, + ETH_SS_STATS_PHY, + ETH_SS_TS_FLAGS, /* add new constants above here */ ETH_SS_COUNT @@ -753,6 +757,197 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + +/** * enum ethtool_pse_types - Types of PSE controller. * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown * @ETHTOOL_PSE_PODL: PSE controller which support PoDL @@ -878,6 +1073,24 @@ enum ethtool_mm_verify_status { }; /** + * enum ethtool_module_fw_flash_status - plug-in module firmware flashing status + * @ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has + * started. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process + * is in progress. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was + * completed successfully. + * @ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was + * stopped due to an error. + */ +enum ethtool_module_fw_flash_status { + ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED = 1, + ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS, + ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED, + ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR, +}; + +/** * struct ethtool_gstrings - string set for data tagging * @cmd: Command number = %ETHTOOL_GSTRINGS * @string_set: String set ID; one of &enum ethtool_stringset @@ -1845,6 +2058,25 @@ enum ethtool_link_mode_bit_indices { ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99, ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100, ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101, + ETHTOOL_LINK_MODE_10baseT1BRR_Full_BIT = 102, + ETHTOOL_LINK_MODE_200000baseCR_Full_BIT = 103, + ETHTOOL_LINK_MODE_200000baseKR_Full_BIT = 104, + ETHTOOL_LINK_MODE_200000baseDR_Full_BIT = 105, + ETHTOOL_LINK_MODE_200000baseDR_2_Full_BIT = 106, + ETHTOOL_LINK_MODE_200000baseSR_Full_BIT = 107, + ETHTOOL_LINK_MODE_200000baseVR_Full_BIT = 108, + ETHTOOL_LINK_MODE_400000baseCR2_Full_BIT = 109, + ETHTOOL_LINK_MODE_400000baseKR2_Full_BIT = 110, + ETHTOOL_LINK_MODE_400000baseDR2_Full_BIT = 111, + ETHTOOL_LINK_MODE_400000baseDR2_2_Full_BIT = 112, + ETHTOOL_LINK_MODE_400000baseSR2_Full_BIT = 113, + ETHTOOL_LINK_MODE_400000baseVR2_Full_BIT = 114, + ETHTOOL_LINK_MODE_800000baseCR4_Full_BIT = 115, + ETHTOOL_LINK_MODE_800000baseKR4_Full_BIT = 116, + ETHTOOL_LINK_MODE_800000baseDR4_Full_BIT = 117, + ETHTOOL_LINK_MODE_800000baseDR4_2_Full_BIT = 118, + ETHTOOL_LINK_MODE_800000baseSR4_Full_BIT = 119, + ETHTOOL_LINK_MODE_800000baseVR4_Full_BIT = 120, /* must be last entry */ __ETHTOOL_LINK_MODE_MASK_NBITS @@ -2057,73 +2289,81 @@ static inline int ethtool_validate_duplex(uint8_t duplex) * be exploited to reduce the RSS queue spread. */ #define RXH_XFRM_SYM_XOR (1 << 0) +/* Similar to SYM_XOR, except that one copy of the XOR'ed fields is replaced by + * an OR of the same fields + */ +#define RXH_XFRM_SYM_OR_XOR (1 << 1) #define RXH_XFRM_NO_CHANGE 0xff -/* L2-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ -#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ -#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ -#define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */ -#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */ -#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */ -#define AH_ESP_V6_FLOW 0x08 /* hash only */ -#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ -#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */ -#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */ -#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ -#define IP_USER_FLOW IPV4_USER_FLOW -#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */ -#define IPV4_FLOW 0x10 /* hash only */ -#define IPV6_FLOW 0x11 /* hash only */ -#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ - -/* Used for GTP-U IPv4 and IPv6. - * The format of GTP packets only includes - * elements such as TEID and GTP version. - * It is primarily intended for data communication of the UE. - */ -#define GTPU_V4_FLOW 0x13 /* hash only */ -#define GTPU_V6_FLOW 0x14 /* hash only */ - -/* Use for GTP-C IPv4 and v6. - * The format of these GTP packets does not include TEID. - * Primarily expected to be used for communication - * to create sessions for UE data communication, - * commonly referred to as CSR (Create Session Request). - */ -#define GTPC_V4_FLOW 0x15 /* hash only */ -#define GTPC_V6_FLOW 0x16 /* hash only */ - -/* Use for GTP-C IPv4 and v6. - * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID. - * After session creation, it becomes this packet. - * This is mainly used for requests to realize UE handover. - */ -#define GTPC_TEID_V4_FLOW 0x17 /* hash only */ -#define GTPC_TEID_V6_FLOW 0x18 /* hash only */ - -/* Use for GTP-U and extended headers for the PSC (PDU Session Container). - * The format of these GTP packets includes TEID and QFI. - * In 5G communication using UPF (User Plane Function), - * data communication with this extended header is performed. - */ -#define GTPU_EH_V4_FLOW 0x19 /* hash only */ -#define GTPU_EH_V6_FLOW 0x1a /* hash only */ - -/* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers. - * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by - * UL/DL included in the PSC. - * There are differences in the data included based on Downlink/Uplink, - * and can be used to distinguish packets. - * The functions described so far are useful when you want to - * handle communication from the mobile network in UPF, PGW, etc. - */ -#define GTPU_UL_V4_FLOW 0x1b /* hash only */ -#define GTPU_UL_V6_FLOW 0x1c /* hash only */ -#define GTPU_DL_V4_FLOW 0x1d /* hash only */ -#define GTPU_DL_V6_FLOW 0x1e /* hash only */ +enum { + /* L2-L4 network traffic flow types */ + TCP_V4_FLOW = 0x01, /* hash or spec (tcp_ip4_spec) */ + UDP_V4_FLOW = 0x02, /* hash or spec (udp_ip4_spec) */ + SCTP_V4_FLOW = 0x03, /* hash or spec (sctp_ip4_spec) */ + AH_ESP_V4_FLOW = 0x04, /* hash only */ + TCP_V6_FLOW = 0x05, /* hash or spec (tcp_ip6_spec; nfc only) */ + UDP_V6_FLOW = 0x06, /* hash or spec (udp_ip6_spec; nfc only) */ + SCTP_V6_FLOW = 0x07, /* hash or spec (sctp_ip6_spec; nfc only) */ + AH_ESP_V6_FLOW = 0x08, /* hash only */ + AH_V4_FLOW = 0x09, /* hash or spec (ah_ip4_spec) */ + ESP_V4_FLOW = 0x0a, /* hash or spec (esp_ip4_spec) */ + AH_V6_FLOW = 0x0b, /* hash or spec (ah_ip6_spec; nfc only) */ + ESP_V6_FLOW = 0x0c, /* hash or spec (esp_ip6_spec; nfc only) */ + IPV4_USER_FLOW = 0x0d, /* spec only (usr_ip4_spec) */ + IP_USER_FLOW = IPV4_USER_FLOW, + IPV6_USER_FLOW = 0x0e, /* spec only (usr_ip6_spec; nfc only) */ + IPV4_FLOW = 0x10, /* hash only */ + IPV6_FLOW = 0x11, /* hash only */ + ETHER_FLOW = 0x12, /* spec only (ether_spec) */ + + /* Used for GTP-U IPv4 and IPv6. + * The format of GTP packets only includes + * elements such as TEID and GTP version. + * It is primarily intended for data communication of the UE. + */ + GTPU_V4_FLOW = 0x13, /* hash only */ + GTPU_V6_FLOW = 0x14, /* hash only */ + + /* Use for GTP-C IPv4 and v6. + * The format of these GTP packets does not include TEID. + * Primarily expected to be used for communication + * to create sessions for UE data communication, + * commonly referred to as CSR (Create Session Request). + */ + GTPC_V4_FLOW = 0x15, /* hash only */ + GTPC_V6_FLOW = 0x16, /* hash only */ + + /* Use for GTP-C IPv4 and v6. + * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID. + * After session creation, it becomes this packet. + * This is mainly used for requests to realize UE handover. + */ + GTPC_TEID_V4_FLOW = 0x17, /* hash only */ + GTPC_TEID_V6_FLOW = 0x18, /* hash only */ + + /* Use for GTP-U and extended headers for the PSC (PDU Session Container). + * The format of these GTP packets includes TEID and QFI. + * In 5G communication using UPF (User Plane Function), + * data communication with this extended header is performed. + */ + GTPU_EH_V4_FLOW = 0x19, /* hash only */ + GTPU_EH_V6_FLOW = 0x1a, /* hash only */ + + /* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers. + * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by + * UL/DL included in the PSC. + * There are differences in the data included based on Downlink/Uplink, + * and can be used to distinguish packets. + * The functions described so far are useful when you want to + * handle communication from the mobile network in UPF, PGW, etc. + */ + GTPU_UL_V4_FLOW = 0x1b, /* hash only */ + GTPU_UL_V6_FLOW = 0x1c, /* hash only */ + GTPU_DL_V4_FLOW = 0x1d, /* hash only */ + GTPU_DL_V6_FLOW = 0x1e, /* hash only */ + + __FLOW_TYPE_COUNT, +}; /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 @@ -2316,6 +2556,11 @@ struct ethtool_link_settings { uint8_t master_slave_state; uint8_t rate_matching; uint32_t reserved[7]; + /* Linux builds with -Wflex-array-member-not-at-end but does + * not use the "link_mode_masks" member. Leave it defined for + * userspace for now, and when userspace wants to start using + * -Wfamnae, we'll need a new solution. + */ uint32_t link_mode_masks[]; /* layout of link_mode_masks fields: * uint32_t map_supported[link_mode_masks_nwords]; @@ -2323,4 +2568,20 @@ struct ethtool_link_settings { * uint32_t map_lp_advertising[link_mode_masks_nwords]; */ }; + +/** + * enum phy_upstream - Represents the upstream component a given PHY device + * is connected to, as in what is on the other end of the MII bus. Most PHYs + * will be attached to an Ethernet MAC controller, but in some cases, there's + * an intermediate PHY used as a media-converter, which will driver another + * MII interface as its output. + * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port, + * or ethernet controller) + * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter) + */ +enum phy_upstream { + PHY_UPSTREAM_MAC, + PHY_UPSTREAM_PHY, +}; + #endif /* _LINUX_ETHTOOL_H */ |