diff options
Diffstat (limited to 'hw')
96 files changed, 184 insertions, 163 deletions
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c index ea331a2..af66bde 100644 --- a/hw/acpi/aml-build.c +++ b/hw/acpi/aml-build.c @@ -312,7 +312,7 @@ build_prepend_package_length(GArray *package, unsigned length, bool incl_self) /* * PkgLength is the length of the inclusive length of the data * and PkgLength's length itself when used for terms with - * explitit length. + * explicit length. */ length += length_bytes; } @@ -680,7 +680,7 @@ Aml *aml_store(Aml *val, Aml *target) * "Op Operand Operand Target" * pattern. * - * Returns: The newly allocated and composed according to patter Aml object. + * Returns: The newly allocated and composed according to pattern Aml object. */ static Aml * build_opcode_2arg_dst(uint8_t op, Aml *arg1, Aml *arg2, Aml *dst) @@ -2159,7 +2159,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f, /* FADT Minor Version */ build_append_int_noprefix(tbl, f->minor_ver, 1); } else { - build_append_int_noprefix(tbl, 0, 3); /* Reserved upto ACPI 5.0 */ + build_append_int_noprefix(tbl, 0, 3); /* Reserved up to ACPI 5.0 */ } build_append_int_noprefix(tbl, 0, 8); /* X_FIRMWARE_CTRL */ diff --git a/hw/acpi/hmat.c b/hw/acpi/hmat.c index 3a6d512..2d5e199 100644 --- a/hw/acpi/hmat.c +++ b/hw/acpi/hmat.c @@ -82,7 +82,7 @@ static void build_hmat_lb(GArray *table_data, HMAT_LB_Info *hmat_lb, uint32_t base; /* Length in bytes for entire structure */ uint32_t lb_length - = 32 /* Table length upto and including Entry Base Unit */ + = 32 /* Table length up to and including Entry Base Unit */ + 4 * num_initiator /* Initiator Proximity Domain List */ + 4 * num_target /* Target Proximity Domain List */ + 2 * num_initiator * num_target; /* Latency or Bandwidth Entries */ diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c index 3cbd416..9ba9080 100644 --- a/hw/acpi/nvdimm.c +++ b/hw/acpi/nvdimm.c @@ -1102,7 +1102,7 @@ static void nvdimm_build_common_dsm(Aml *dev, * be treated as an integer. Moreover, the integer size depends on * DSDT tables revision number. If revision number is < 2, integer * size is 32 bits, otherwise it is 64 bits. - * Because of this CreateField() canot be used if RLEN < Integer Size. + * Because of this CreateField() cannot be used if RLEN < Integer Size. * * Also please note that APCI ASL operator SizeOf() doesn't support * Integer and there isn't any other way to figure out the Integer diff --git a/hw/block/hd-geometry.c b/hw/block/hd-geometry.c index dae13ab..2b0af44 100644 --- a/hw/block/hd-geometry.c +++ b/hw/block/hd-geometry.c @@ -50,7 +50,7 @@ struct partition { uint32_t nr_sects; /* nr of sectors in partition */ } QEMU_PACKED; -/* try to guess the disk logical geometry from the MSDOS partition table. +/* try to guess the disk logical geometry from the MS-DOS partition table. Return 0 if OK, -1 if could not guess */ static int guess_disk_lchs(BlockBackend *blk, int *pcylinders, int *pheads, int *psectors) @@ -66,7 +66,7 @@ static int guess_disk_lchs(BlockBackend *blk, if (blk_pread(blk, 0, BDRV_SECTOR_SIZE, buf, 0) < 0) { return -1; } - /* test msdos magic */ + /* test MS-DOS magic */ if (buf[510] != 0x55 || buf[511] != 0xaa) { return -1; } diff --git a/hw/block/pflash_cfi01.c b/hw/block/pflash_cfi01.c index 3c066e3..62056b1 100644 --- a/hw/block/pflash_cfi01.c +++ b/hw/block/pflash_cfi01.c @@ -891,7 +891,7 @@ static Property pflash_cfi01_properties[] = { /* num-blocks is the number of blocks actually visible to the guest, * ie the total size of the device divided by the sector length. * If we're emulating flash devices wired in parallel the actual - * number of blocks per indvidual device will differ. + * number of blocks per individual device will differ. */ DEFINE_PROP_UINT32("num-blocks", PFlashCFI01, nb_blocs, 0), DEFINE_PROP_UINT64("sector-length", PFlashCFI01, sector_len, 0), diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index eff0304..a2ac062 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -575,7 +575,7 @@ static int cadence_uart_pre_load(void *opaque) { CadenceUARTState *s = opaque; - /* the frequency will be overriden if the refclk field is present */ + /* the frequency will be overridden if the refclk field is present */ clock_set_hz(s->refclk, UART_DEFAULT_REF_CLK); return 0; } diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c index 1b75a89..377d1d9 100644 --- a/hw/char/imx_serial.c +++ b/hw/char/imx_serial.c @@ -112,7 +112,7 @@ static void imx_serial_reset_at_boot(DeviceState *dev) imx_serial_reset(s); /* - * enable the uart on boot, so messages from the linux decompresser + * enable the uart on boot, so messages from the linux decompressor * are visible. On real hardware this is done by the boot rom * before anything else is loaded. */ diff --git a/hw/char/serial.c b/hw/char/serial.c index f3094f8..a32eb25 100644 --- a/hw/char/serial.c +++ b/hw/char/serial.c @@ -54,7 +54,7 @@ #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ #define UART_IIR_CTI 0x0C /* Character Timeout Indication */ -#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functionning */ +#define UART_IIR_FENF 0x80 /* Fifo enabled, but not functioning */ #define UART_IIR_FE 0xC0 /* Fifo enabled */ /* diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c index 4f4d779..d4b5c50 100644 --- a/hw/core/generic-loader.c +++ b/hw/core/generic-loader.c @@ -24,7 +24,7 @@ * callback that does the memory operations. * This device allows the user to monkey patch memory. To be able to do - * this it needs a backend to manage the datas, the same as other + * this it needs a backend to manage the data, the same as other * memory-related devices. In this case as the backend is so trivial we * have merged it with the frontend instead of creating and maintaining a * separate backend. @@ -166,7 +166,7 @@ static void generic_loader_realize(DeviceState *dev, Error **errp) } } - /* Convert the data endiannes */ + /* Convert the data endianness */ if (s->data_be) { s->data = cpu_to_be64(s->data); } else { diff --git a/hw/core/machine.c b/hw/core/machine.c index 59208e6..cb38b8c 100644 --- a/hw/core/machine.c +++ b/hw/core/machine.c @@ -1426,7 +1426,7 @@ void machine_run_board_init(MachineState *machine, const char *mem_path, Error * for (i = 0; machine_class->valid_cpu_types[i]; i++) { if (object_class_dynamic_cast(oc, machine_class->valid_cpu_types[i])) { - /* The user specificed CPU is in the valid field, we are + /* The user specified CPU is in the valid field, we are * good to go. */ break; diff --git a/hw/core/qdev-properties-system.c b/hw/core/qdev-properties-system.c index 6d5d43e..41b7e68 100644 --- a/hw/core/qdev-properties-system.c +++ b/hw/core/qdev-properties-system.c @@ -107,7 +107,7 @@ static void set_drive_helper(Object *obj, Visitor *v, const char *name, } if (*ptr) { - /* BlockBackend alread exists. So, we want to change attached node */ + /* BlockBackend already exists. So, we want to change attached node */ blk = *ptr; ctx = blk_get_aio_context(blk); bs = bdrv_lookup_bs(NULL, str, errp); diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c index 774ca99..bfd8aa5 100644 --- a/hw/cpu/a15mpcore.c +++ b/hw/cpu/a15mpcore.c @@ -161,7 +161,7 @@ static void a15mp_priv_class_init(ObjectClass *klass, void *data) dc->realize = a15mp_priv_realize; device_class_set_props(dc, a15mp_priv_properties); - /* We currently have no savable state */ + /* We currently have no saveable state */ } static const TypeInfo a15mp_priv_info = { diff --git a/hw/cxl/cxl-events.c b/hw/cxl/cxl-events.c index d161d57..3ddd636 100644 --- a/hw/cxl/cxl-events.c +++ b/hw/cxl/cxl-events.c @@ -197,7 +197,7 @@ CXLRetCode cxl_event_clear_records(CXLDeviceState *cxlds, CXLClearEventPayload * QEMU_LOCK_GUARD(&log->lock); /* - * Must itterate the queue twice. + * Must iterate the queue twice. * "The device shall verify the event record handles specified in the input * payload are in temporal order. If the device detects an older event * record that will not be cleared when Clear Event Records is executed, diff --git a/hw/cxl/cxl-host.c b/hw/cxl/cxl-host.c index 034c780..f0920da 100644 --- a/hw/cxl/cxl-host.c +++ b/hw/cxl/cxl-host.c @@ -39,12 +39,6 @@ static void cxl_fixed_memory_window_config(CXLState *cxl_state, return; } - fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets)); - for (i = 0, target = object->targets; target; i++, target = target->next) { - /* This link cannot be resolved yet, so stash the name for now */ - fw->targets[i] = g_strdup(target->value); - } - if (object->size % (256 * MiB)) { error_setg(errp, "Size of a CXL fixed memory window must be a multiple of 256MiB"); @@ -64,6 +58,12 @@ static void cxl_fixed_memory_window_config(CXLState *cxl_state, fw->enc_int_gran = 0; } + fw->targets = g_malloc0_n(fw->num_targets, sizeof(*fw->targets)); + for (i = 0, target = object->targets; target; i++, target = target->next) { + /* This link cannot be resolved yet, so stash the name for now */ + fw->targets[i] = g_strdup(target->value); + } + cxl_state->fixed_windows = g_list_append(cxl_state->fixed_windows, g_steal_pointer(&fw)); diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c index 02f9b5a..434ccc5 100644 --- a/hw/cxl/cxl-mailbox-utils.c +++ b/hw/cxl/cxl-mailbox-utils.c @@ -39,7 +39,7 @@ * fill the output data into cmd->payload (overwriting what was there), * setting the length, and returning a valid return code. * - * XXX: The handler need not worry about endianess. The payload is read out of + * XXX: The handler need not worry about endianness. The payload is read out of * a register interface that already deals with it. */ @@ -501,7 +501,7 @@ static CXLRetCode cmd_media_get_poison_list(struct cxl_cmd *cmd, uint16_t out_pl_len; query_start = ldq_le_p(&in->pa); - /* 64 byte alignemnt required */ + /* 64 byte alignment required */ if (query_start & 0x3f) { return CXL_MBOX_INVALID_INPUT; } diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index c6e35ba..77797a6 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -247,7 +247,7 @@ static void omap_dma_deactivate_channel(struct omap_dma_s *s, return; } - /* Don't deactive the channel if it is synchronized and the DMA request is + /* Don't deactivate the channel if it is synchronized and the DMA request is active */ if (ch->sync && ch->enable && (s->dma->drqbmp & (1ULL << ch->sync))) return; @@ -422,7 +422,7 @@ static void omap_dma_transfer_generic(struct soc_dma_ch_s *dma) if (ch->fs && ch->bs) { a->pck_element ++; - /* Check if a full packet has beed transferred. */ + /* Check if a full packet has been transferred. */ if (a->pck_element == a->pck_elements) { a->pck_element = 0; diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index bb12b0a..4d2d40b 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -779,7 +779,7 @@ static Aml *initialize_route(Aml *route, const char *link_name, * * Returns an array of 128 routes, one for each device, * based on device location. - * The main goal is to equaly distribute the interrupts + * The main goal is to equally distribute the interrupts * over the 4 existing ACPI links (works only for i440fx). * The hash function is (slot + pin) & 3 -> "LNK[D|A|B|C]". * @@ -2079,7 +2079,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) } /* - * Insert DMAR scope for PCI bridges and endpoint devcie + * Insert DMAR scope for PCI bridges and endpoint devices */ static void insert_scope(PCIBus *bus, PCIDevice *dev, void *opaque) diff --git a/hw/i386/amd_iommu.c b/hw/i386/amd_iommu.c index 9c77304..c98a3c6 100644 --- a/hw/i386/amd_iommu.c +++ b/hw/i386/amd_iommu.c @@ -259,7 +259,7 @@ static void amdvi_log_command_error(AMDVIState *s, hwaddr addr) pci_word_test_and_set_mask(s->pci.dev.config + PCI_STATUS, PCI_STATUS_SIG_TARGET_ABORT); } -/* log an illegal comand event +/* log an illegal command event * @addr : address of illegal command */ static void amdvi_log_illegalcom_error(AMDVIState *s, uint16_t info, @@ -767,7 +767,7 @@ static void amdvi_mmio_write(void *opaque, hwaddr addr, uint64_t val, break; case AMDVI_MMIO_COMMAND_BASE: amdvi_mmio_reg_write(s, size, val, addr); - /* FIXME - make sure System Software has finished writing incase + /* FIXME - make sure System Software has finished writing in case * it writes in chucks less than 8 bytes in a robust way.As for * now, this hacks works for the linux driver */ diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c index c9961ef..c0ce896 100644 --- a/hw/i386/intel_iommu.c +++ b/hw/i386/intel_iommu.c @@ -52,7 +52,7 @@ /* * PCI bus number (or SID) is not reliable since the device is usaully - * initalized before guest can configure the PCI bridge + * initialized before guest can configure the PCI bridge * (SECONDARY_BUS_NUMBER). */ struct vtd_as_key { @@ -1694,7 +1694,7 @@ static bool vtd_switch_address_space(VTDAddressSpace *as) * """ * * We enable per as memory region (iommu_ir_fault) for catching - * the tranlsation for interrupt range through PASID + PT. + * the translation for interrupt range through PASID + PT. */ if (pt && as->pasid != PCI_NO_PASID) { memory_region_set_enabled(&as->iommu_ir_fault, true); diff --git a/hw/i386/kvm/xen_xenstore.c b/hw/i386/kvm/xen_xenstore.c index 133d89e..660d0b7 100644 --- a/hw/i386/kvm/xen_xenstore.c +++ b/hw/i386/kvm/xen_xenstore.c @@ -1156,7 +1156,7 @@ static unsigned int copy_to_ring(XenXenstoreState *s, uint8_t *ptr, /* * This matches the barrier in copy_to_ring() (or the guest's - * equivalent) betweem writing the data to the ring and updating + * equivalent) between writing the data to the ring and updating * rsp_prod. It protects against the pathological case (which * again I think never happened except on Alpha) where our * subsequent writes to the ring could *cross* the read of diff --git a/hw/i386/kvm/xenstore_impl.c b/hw/i386/kvm/xenstore_impl.c index d9732b5..1d134a6 100644 --- a/hw/i386/kvm/xenstore_impl.c +++ b/hw/i386/kvm/xenstore_impl.c @@ -1436,7 +1436,7 @@ static void save_node(gpointer key, gpointer value, gpointer opaque) /* * If we already wrote this node, refer to the previous copy. * There's no rename/move in XenStore, so all we need to find - * it is the tx_id of the transation in which it exists. Which + * it is the tx_id of the transaction in which it exists. Which * may be the root tx. */ if (n->serialized_tx != XBT_NULL) { diff --git a/hw/i386/pc.c b/hw/i386/pc.c index 54838c0..3db0743 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -436,7 +436,7 @@ static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) return 0xffffffffffffffffULL; } -/* MSDOS compatibility mode FPU exception support */ +/* MS-DOS compatibility mode FPU exception support */ static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, unsigned size) { @@ -1746,16 +1746,16 @@ static void pc_machine_set_max_fw_size(Object *obj, Visitor *v, } /* - * We don't have a theoretically justifiable exact lower bound on the base - * address of any flash mapping. In practice, the IO-APIC MMIO range is - * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free - * only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in - * size. - */ + * We don't have a theoretically justifiable exact lower bound on the base + * address of any flash mapping. In practice, the IO-APIC MMIO range is + * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free + * only 18MiB-4KiB below 4GiB. For now, restrict the cumulative mapping to + * 16MiB in size. + */ if (value > 16 * MiB) { error_setg(errp, "User specified max allowed firmware size %" PRIu64 " is " - "greater than 16MiB. If combined firwmare size exceeds " + "greater than 16MiB. If combined firmware size exceeds " "16MiB the system may not boot, or experience intermittent" "stability issues.", value); diff --git a/hw/input/hid.c b/hw/input/hid.c index e7ecebd..a9c7dd1 100644 --- a/hw/input/hid.c +++ b/hw/input/hid.c @@ -209,7 +209,7 @@ static void hid_pointer_sync(DeviceState *dev) prev->dz += curr->dz; curr->dz = 0; } else { - /* prepate next (clear rel, copy abs + btns) */ + /* prepare next (clear rel, copy abs + btns) */ if (hs->kind == HID_MOUSE) { next->xdx = 0; next->ydy = 0; diff --git a/hw/input/tsc2005.c b/hw/input/tsc2005.c index 555b677..db2b80e 100644 --- a/hw/input/tsc2005.c +++ b/hw/input/tsc2005.c @@ -157,14 +157,14 @@ static uint16_t tsc2005_read(TSC2005State *s, int reg) s->reset = true; return ret; - case 0x8: /* AUX high treshold */ + case 0x8: /* AUX high threshold */ return s->aux_thr[1]; - case 0x9: /* AUX low treshold */ + case 0x9: /* AUX low threshold */ return s->aux_thr[0]; - case 0xa: /* TEMP high treshold */ + case 0xa: /* TEMP high threshold */ return s->temp_thr[1]; - case 0xb: /* TEMP low treshold */ + case 0xb: /* TEMP low threshold */ return s->temp_thr[0]; case 0xc: /* CFR0 */ @@ -186,17 +186,17 @@ static uint16_t tsc2005_read(TSC2005State *s, int reg) static void tsc2005_write(TSC2005State *s, int reg, uint16_t data) { switch (reg) { - case 0x8: /* AUX high treshold */ + case 0x8: /* AUX high threshold */ s->aux_thr[1] = data; break; - case 0x9: /* AUX low treshold */ + case 0x9: /* AUX low threshold */ s->aux_thr[0] = data; break; - case 0xa: /* TEMP high treshold */ + case 0xa: /* TEMP high threshold */ s->temp_thr[1] = data; break; - case 0xb: /* TEMP low treshold */ + case 0xb: /* TEMP low threshold */ s->temp_thr[0] = data; break; diff --git a/hw/intc/loongarch_extioi.c b/hw/intc/loongarch_extioi.c index af75460..24fb3af 100644 --- a/hw/intc/loongarch_extioi.c +++ b/hw/intc/loongarch_extioi.c @@ -191,7 +191,7 @@ static MemTxResult extioi_writew(void *opaque, hwaddr addr, cpu = attrs.requester_id; old_data = s->coreisr[cpu][index]; s->coreisr[cpu][index] = old_data & ~val; - /* write 1 to clear interrrupt */ + /* write 1 to clear interrupt */ old_data &= val; irq = ctz32(old_data); while (irq != 32) { diff --git a/hw/intc/loongson_liointc.c b/hw/intc/loongson_liointc.c index cc11b54..c10fb97 100644 --- a/hw/intc/loongson_liointc.c +++ b/hw/intc/loongson_liointc.c @@ -1,5 +1,5 @@ /* - * QEMU Loongson Local I/O interrupt controler. + * QEMU Loongson Local I/O interrupt controller. * * Copyright (c) 2020 Huacai Chen <chenhc@lemote.com> * Copyright (c) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index 647bf32..435c476 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -68,7 +68,7 @@ static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) p_intr = 255; /* Find the interrupt line with the highest dynamic priority. - * Note: 0 denotes the hightest priority. + * Note: 0 denotes the highest priority. * If all interrupts have the same priority, the default order is IRQ_N, * IRQ_N-1,...,IRQ_0. */ for (j = 0; j < s->nbanks; ++j) { diff --git a/hw/intc/pnv_xive.c b/hw/intc/pnv_xive.c index bda3478..da10dec 100644 --- a/hw/intc/pnv_xive.c +++ b/hw/intc/pnv_xive.c @@ -988,7 +988,7 @@ static void pnv_xive_ic_reg_write(void *opaque, hwaddr offset, */ case VC_SBC_CONFIG: /* Store EOI configuration */ /* - * Configure store EOI if required by firwmare (skiboot has removed + * Configure store EOI if required by firmware (skiboot has removed * support recently though) */ if (val & (VC_SBC_CONF_CPLX_CIST | VC_SBC_CONF_CIST_BOTH)) { diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c index 8bcab28..7f701d4 100644 --- a/hw/intc/spapr_xive.c +++ b/hw/intc/spapr_xive.c @@ -27,7 +27,7 @@ #include "trace.h" /* - * XIVE Virtualization Controller BAR and Thread Managment BAR that we + * XIVE Virtualization Controller BAR and Thread Management BAR that we * use for the ESB pages and the TIMA pages */ #define SPAPR_XIVE_VC_BASE 0x0006010000000000ull diff --git a/hw/intc/spapr_xive_kvm.c b/hw/intc/spapr_xive_kvm.c index 61fe7bd..5789062 100644 --- a/hw/intc/spapr_xive_kvm.c +++ b/hw/intc/spapr_xive_kvm.c @@ -485,7 +485,7 @@ static int kvmppc_xive_get_queues(SpaprXive *xive, Error **errp) * * Whenever the VM is stopped, the VM change handler sets the source * PQs to PENDING to stop the flow of events and to possibly catch a - * triggered interrupt occuring while the VM is stopped. The previous + * triggered interrupt occurring while the VM is stopped. The previous * state is saved in anticipation of a migration. The XIVE controller * is then synced through KVM to flush any in-flight event * notification and stabilize the EQs. @@ -551,7 +551,7 @@ static void kvmppc_xive_change_state_handler(void *opaque, bool running, /* * PQ is set to PENDING to possibly catch a triggered - * interrupt occuring while the VM is stopped (hotplug event + * interrupt occurring while the VM is stopped (hotplug event * for instance) . */ if (pq != XIVE_ESB_OFF) { @@ -633,7 +633,7 @@ int kvmppc_xive_post_load(SpaprXive *xive, int version_id) /* The KVM XIVE device should be in use */ assert(xive->fd != -1); - /* Restore the ENDT first. The targetting depends on it. */ + /* Restore the ENDT first. The targeting depends on it. */ for (i = 0; i < xive->nr_ends; i++) { if (!xive_end_is_valid(&xive->endt[i])) { continue; diff --git a/hw/intc/xive.c b/hw/intc/xive.c index df3ee04..a358559 100644 --- a/hw/intc/xive.c +++ b/hw/intc/xive.c @@ -1608,7 +1608,7 @@ int xive_presenter_tctx_match(XivePresenter *xptr, XiveTCTX *tctx, * * It receives notification requests sent by the IVRE to find one * matching NVT (or more) dispatched on the processor threads. In case - * of a single NVT notification, the process is abreviated and the + * of a single NVT notification, the process is abbreviated and the * thread is signaled if a match is found. In case of a logical server * notification (bits ignored at the end of the NVT identifier), the * IVPE and IVRE select a winning thread using different filters. This diff --git a/hw/intc/xive2.c b/hw/intc/xive2.c index c37ef25..98c0d8b 100644 --- a/hw/intc/xive2.c +++ b/hw/intc/xive2.c @@ -542,7 +542,7 @@ static void xive2_router_realize(DeviceState *dev, Error **errp) /* * Notification using the END ESe/ESn bit (Event State Buffer for - * escalation and notification). Profide futher coalescing in the + * escalation and notification). Profide further coalescing in the * Router. */ static bool xive2_router_end_es_notify(Xive2Router *xrtr, uint8_t end_blk, @@ -621,7 +621,7 @@ static void xive2_router_end_notify(Xive2Router *xrtr, uint8_t end_blk, /* * Check the END ESn (Event State Buffer for notification) for - * even futher coalescing in the Router + * even further coalescing in the Router */ if (!xive2_end_is_notify(&end)) { /* ESn[Q]=1 : end of notification */ @@ -702,7 +702,7 @@ do_escalation: /* * Check the END ESe (Event State Buffer for escalation) for even - * futher coalescing in the Router + * further coalescing in the Router */ if (!xive2_end_is_uncond_escalation(&end)) { /* ESe[Q]=1 : end of escalation notification */ diff --git a/hw/ipmi/ipmi_bmc_extern.c b/hw/ipmi/ipmi_bmc_extern.c index acf2bab..e232d35 100644 --- a/hw/ipmi/ipmi_bmc_extern.c +++ b/hw/ipmi/ipmi_bmc_extern.c @@ -301,7 +301,7 @@ static void handle_msg(IPMIBmcExtern *ibe) ipmi_debug("msg checksum failure\n"); return; } else { - ibe->inpos--; /* Remove checkum */ + ibe->inpos--; /* Remove checksum */ } timer_del(ibe->extern_timer); diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c index 4e31474..4cdcb3f 100644 --- a/hw/mem/cxl_type3.c +++ b/hw/mem/cxl_type3.c @@ -1,3 +1,14 @@ +/* + * CXL Type 3 (memory expander) device + * + * Copyright(C) 2020 Intel Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2. See the + * COPYING file in the top-level directory. + * + * SPDX-License-Identifier: GPL-v2-only + */ + #include "qemu/osdep.h" #include "qemu/units.h" #include "qemu/error-report.h" @@ -538,7 +549,7 @@ static void ct3d_reg_write(void *opaque, hwaddr offset, uint64_t value, FIRST_ERROR_POINTER, cxl_err->type); } else { /* - * If no more errors, then follow recomendation of PCI spec + * If no more errors, then follow recommendation of PCI spec * r6.0 6.2.4.2 to set the first error pointer to a status * bit that will never be used. */ @@ -697,7 +708,7 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) PCI_BASE_ADDRESS_MEM_TYPE_64, &ct3d->cxl_dstate.device_registers); - /* MSI(-X) Initailization */ + /* MSI(-X) Initialization */ rc = msix_init_exclusive_bar(pci_dev, msix_num, 4, NULL); if (rc) { goto err_address_space_free; @@ -706,7 +717,7 @@ static void ct3_realize(PCIDevice *pci_dev, Error **errp) msix_vector_use(pci_dev, i); } - /* DOE Initailization */ + /* DOE Initialization */ pcie_doe_init(pci_dev, &ct3d->doe_cdat, 0x190, doe_cdat_prot, true, 0); cxl_cstate->cdat.build_cdat_table = ct3_build_cdat_table; diff --git a/hw/mem/cxl_type3_stubs.c b/hw/mem/cxl_type3_stubs.c index f3e4a9f..8ba5d3d 100644 --- a/hw/mem/cxl_type3_stubs.c +++ b/hw/mem/cxl_type3_stubs.c @@ -1,3 +1,13 @@ +/* + * CXL Type 3 (memory expander) device QMP stubs + * + * Copyright(C) 2020 Intel Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2. See the + * COPYING file in the top-level directory. + * + * SPDX-License-Identifier: GPL-v2-only + */ #include "qemu/osdep.h" #include "qapi/error.h" diff --git a/hw/misc/imx7_ccm.c b/hw/misc/imx7_ccm.c index f135ec7..7539f7f 100644 --- a/hw/misc/imx7_ccm.c +++ b/hw/misc/imx7_ccm.c @@ -227,7 +227,7 @@ static uint32_t imx7_ccm_get_clock_frequency(IMXCCMState *dev, IMXClk clock) * have fixed frequencies and we can provide requested frequency * easily. However for CCM provided clocks (like IPG) each GPT * timer can have its own clock root. - * This means we need additionnal information when calling this + * This means we need additional information when calling this * function to know the requester's identity. */ uint32_t freq = 0; diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c index 0787a02..f84cc68 100644 --- a/hw/misc/mac_via.c +++ b/hw/misc/mac_via.c @@ -246,7 +246,7 @@ #define vT2CL 0x1000 /* [VIA only] Timer two counter low. */ #define vT2CH 0x1200 /* [VIA only] Timer two counter high. */ #define vSR 0x1400 /* [VIA only] Shift register. */ -#define vACR 0x1600 /* [VIA only] Auxilary control register. */ +#define vACR 0x1600 /* [VIA only] Auxiliary control register. */ #define vPCR 0x1800 /* [VIA only] Peripheral control register. */ /* * CHRP sez never ever to *write* this. diff --git a/hw/misc/stm32f2xx_syscfg.c b/hw/misc/stm32f2xx_syscfg.c index 04c22c2..19c1e86 100644 --- a/hw/misc/stm32f2xx_syscfg.c +++ b/hw/misc/stm32f2xx_syscfg.c @@ -94,12 +94,12 @@ static void stm32f2xx_syscfg_write(void *opaque, hwaddr addr, switch (addr) { case SYSCFG_MEMRMP: qemu_log_mask(LOG_UNIMP, - "%s: Changeing the memory mapping isn't supported " \ + "%s: Changing the memory mapping isn't supported " \ "in QEMU\n", __func__); return; case SYSCFG_PMC: qemu_log_mask(LOG_UNIMP, - "%s: Changeing the memory mapping isn't supported " \ + "%s: Changing the memory mapping isn't supported " \ "in QEMU\n", __func__); return; case SYSCFG_EXTICR1: diff --git a/hw/misc/trace-events b/hw/misc/trace-events index e8b2be1..bc87cd3 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -155,7 +155,7 @@ stm32f4xx_syscfg_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " " stm32f4xx_syscfg_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" # stm32f4xx_exti.c -stm32f4xx_exti_set_irq(int irq, int leve) "Set EXTI: %d to %d" +stm32f4xx_exti_set_irq(int irq, int level) "Set EXTI: %d to %d" stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " " stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index 8b70285..41f38a9 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -285,7 +285,7 @@ static void zynq_slcr_compute_clocks_internal(ZynqSLCRState *s, uint64_t ps_clk) } /** - * Compute and set the ouputs clocks periods. + * Compute and set the outputs clocks periods. * But do not propagate them further. Connected clocks * will not receive any updates (See zynq_slcr_compute_clocks()) */ diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c index 42ea241..f445d8b 100644 --- a/hw/net/cadence_gem.c +++ b/hw/net/cadence_gem.c @@ -81,8 +81,8 @@ #define GEM_IPGSTRETCH (0x000000BC / 4) /* IPG Stretch reg */ #define GEM_SVLAN (0x000000C0 / 4) /* Stacked VLAN reg */ #define GEM_MODID (0x000000FC / 4) /* Module ID reg */ -#define GEM_OCTTXLO (0x00000100 / 4) /* Octects transmitted Low reg */ -#define GEM_OCTTXHI (0x00000104 / 4) /* Octects transmitted High reg */ +#define GEM_OCTTXLO (0x00000100 / 4) /* Octets transmitted Low reg */ +#define GEM_OCTTXHI (0x00000104 / 4) /* Octets transmitted High reg */ #define GEM_TXCNT (0x00000108 / 4) /* Error-free Frames transmitted */ #define GEM_TXBCNT (0x0000010C / 4) /* Error-free Broadcast Frames */ #define GEM_TXMCNT (0x00000110 / 4) /* Error-free Multicast Frame */ @@ -101,8 +101,8 @@ #define GEM_LATECOLLCNT (0x00000144 / 4) /* Late Collision Frames */ #define GEM_DEFERTXCNT (0x00000148 / 4) /* Deferred Transmission Frames */ #define GEM_CSENSECNT (0x0000014C / 4) /* Carrier Sense Error Counter */ -#define GEM_OCTRXLO (0x00000150 / 4) /* Octects Received register Low */ -#define GEM_OCTRXHI (0x00000154 / 4) /* Octects Received register High */ +#define GEM_OCTRXLO (0x00000150 / 4) /* Octets Received register Low */ +#define GEM_OCTRXHI (0x00000154 / 4) /* Octets Received register High */ #define GEM_RXCNT (0x00000158 / 4) /* Error-free Frames Received */ #define GEM_RXBROADCNT (0x0000015C / 4) /* Error-free Broadcast Frames RX */ #define GEM_RXMULTICNT (0x00000160 / 4) /* Error-free Multicast Frames RX */ @@ -954,7 +954,7 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size) /* Is this destination MAC address "for us" ? */ maf = gem_mac_address_filter(s, buf); if (maf == GEM_RX_REJECT) { - return size; /* no, drop siliently b/c it's not an error */ + return size; /* no, drop silently b/c it's not an error */ } /* Discard packets with receive length error enabled ? */ diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c index a596f7f..c6f5fb7 100644 --- a/hw/net/dp8393x.c +++ b/hw/net/dp8393x.c @@ -551,7 +551,7 @@ static uint64_t dp8393x_read(void *opaque, hwaddr addr, unsigned int size) val = s->cam[s->regs[SONIC_CEP] & 0xf][SONIC_CAP0 - reg]; } break; - /* All other registers have no special contraints */ + /* All other registers have no special constraints */ default: val = s->regs[reg]; } diff --git a/hw/net/e1000_regs.h b/hw/net/e1000_regs.h index 8a4ce82..39f4882 100644 --- a/hw/net/e1000_regs.h +++ b/hw/net/e1000_regs.h @@ -130,7 +130,7 @@ #define E1000_GCR2 0x05B64 /* 3GIO Control Register 2 */ #define E1000_FFLT_DBG 0x05F04 /* Debug Register */ -#define E1000_HICR 0x08F00 /* Host Inteface Control */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ #define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */ #define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */ diff --git a/hw/net/e1000x_regs.h b/hw/net/e1000x_regs.h index 13760c6..cd896fc 100644 --- a/hw/net/e1000x_regs.h +++ b/hw/net/e1000x_regs.h @@ -839,7 +839,7 @@ union e1000_rx_desc_packet_split { #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ diff --git a/hw/net/fsl_etsec/rings.c b/hw/net/fsl_etsec/rings.c index 2f2f359..42216de 100644 --- a/hw/net/fsl_etsec/rings.c +++ b/hw/net/fsl_etsec/rings.c @@ -365,7 +365,7 @@ void etsec_walk_tx_ring(eTSEC *etsec, int ring_nbr) } while (TRUE); /* Save the Buffer Descriptor Pointers to last bd that was not - * succesfully closed */ + * successfully closed */ etsec->regs[TBPTR0 + ring_nbr].value = bd_addr; /* Set transmit halt THLTx */ diff --git a/hw/net/igb_regs.h b/hw/net/igb_regs.h index ed7427b..e5a47ea 100644 --- a/hw/net/igb_regs.h +++ b/hw/net/igb_regs.h @@ -364,7 +364,7 @@ union e1000_adv_rx_desc { /* Indicates that VF is still clear to send requests */ #define E1000_VT_MSGTYPE_CTS 0x20000000 #define E1000_VT_MSGINFO_SHIFT 16 -/* bits 23:16 are used for exra info for certain messages */ +/* bits 23:16 are used for extra info for certain messages */ #define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) #define E1000_VF_RESET 0x01 /* VF requests reset */ @@ -491,7 +491,7 @@ union e1000_adv_rx_desc { #define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */ #define E1000_VT_MSGINFO_SHIFT 16 -/* bits 23:16 are used for exra info for certain messages */ +/* bits 23:16 are used for extra info for certain messages */ #define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) #define E1000_VF_RESET 0x01 /* VF requests reset */ diff --git a/hw/net/mcf_fec.c b/hw/net/mcf_fec.c index 8aa27bd..ec3ddf5 100644 --- a/hw/net/mcf_fec.c +++ b/hw/net/mcf_fec.c @@ -571,7 +571,7 @@ static ssize_t mcf_fec_receive(NetClientState *nc, const uint8_t *buf, size_t si size += 4; crc = cpu_to_be32(crc32(~0, buf, size)); crc_ptr = (uint8_t *)&crc; - /* Huge frames are truncted. */ + /* Huge frames are truncated. */ if (size > FEC_MAX_FRAME_SIZE) { size = FEC_MAX_FRAME_SIZE; flags |= FEC_BD_TR | FEC_BD_LG; diff --git a/hw/net/rocker/rocker_fp.c b/hw/net/rocker/rocker_fp.c index cbeed65..9afd0c5 100644 --- a/hw/net/rocker/rocker_fp.c +++ b/hw/net/rocker/rocker_fp.c @@ -134,7 +134,7 @@ static ssize_t fp_port_receive_iov(NetClientState *nc, const struct iovec *iov, FpPort *port = qemu_get_nic_opaque(nc); /* If the port is disabled, we want to drop this pkt - * now rather than queing it for later. We don't want + * now rather than queueing it for later. We don't want * any stale pkts getting into the device when the port * transitions to enabled. */ diff --git a/hw/net/rtl8139.c b/hw/net/rtl8139.c index b4df75b..4525fda 100644 --- a/hw/net/rtl8139.c +++ b/hw/net/rtl8139.c @@ -100,7 +100,7 @@ enum RTL8139_registers { MAC0 = 0, /* Ethernet hardware address. */ MAR0 = 8, /* Multicast filter. */ TxStatus0 = 0x10,/* Transmit status (Four 32bit registers). C mode only */ - /* Dump Tally Conter control register(64bit). C+ mode only */ + /* Dump Tally Counter control register(64bit). C+ mode only */ TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ RxBuf = 0x30, ChipCmd = 0x37, diff --git a/hw/net/smc91c111.c b/hw/net/smc91c111.c index ad778cd..ddbceda 100644 --- a/hw/net/smc91c111.c +++ b/hw/net/smc91c111.c @@ -361,7 +361,7 @@ static void smc91c111_writeb(void *opaque, hwaddr offset, case 4: case 5: case 6: case 7: case 8: case 9: /* IA */ /* Not implemented. */ return; - case 10: /* Genral Purpose */ + case 10: /* General Purpose */ SET_LOW(gpr, value); return; case 11: diff --git a/hw/net/sungem.c b/hw/net/sungem.c index 510b370..c2e2c90 100644 --- a/hw/net/sungem.c +++ b/hw/net/sungem.c @@ -1228,7 +1228,7 @@ static void sungem_mmio_mif_write(void *opaque, hwaddr addr, uint64_t val, case MIF_SMACHINE: return; /* No actual write */ case MIF_CFG: - /* Maintain the RO MDI bits to advertize an MDIO PHY on MDI0 */ + /* Maintain the RO MDI bits to advertise an MDIO PHY on MDI0 */ val &= ~MIF_CFG_MDI1; val |= MIF_CFG_MDI0; break; diff --git a/hw/net/sunhme.c b/hw/net/sunhme.c index 391d26f..64d4ea5 100644 --- a/hw/net/sunhme.c +++ b/hw/net/sunhme.c @@ -901,7 +901,7 @@ static void sunhme_reset(DeviceState *ds) /* Configure internal transceiver */ s->mifregs[HME_MIFI_CFG >> 2] |= HME_MIF_CFG_MDI0; - /* Advetise auto, 100Mbps FD */ + /* Advertise auto, 100Mbps FD */ s->miiregs[MII_ANAR] = MII_ANAR_TXFD; s->miiregs[MII_BMSR] = MII_BMSR_AUTONEG | MII_BMSR_100TX_FD | MII_BMSR_AN_COMP; diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c index bd0ead9..5a0201c 100644 --- a/hw/net/virtio-net.c +++ b/hw/net/virtio-net.c @@ -1330,7 +1330,7 @@ static void virtio_net_detach_epbf_rss(VirtIONet *n) static bool virtio_net_load_ebpf(VirtIONet *n) { if (!virtio_net_attach_ebpf_to_backend(n->nic, -1)) { - /* backend does't support steering ebpf */ + /* backend doesn't support steering ebpf */ return false; } @@ -2069,7 +2069,7 @@ static void virtio_net_rsc_extract_unit6(VirtioNetRscChain *chain, + sizeof(struct ip6_header)); unit->tcp_hdrlen = (htons(unit->tcp->th_offset_flags) & 0xF000) >> 10; - /* There is a difference between payload lenght in ipv4 and v6, + /* There is a difference between payload length in ipv4 and v6, ip header is excluded in ipv6 */ unit->payload = htons(*unit->ip_plen) - unit->tcp_hdrlen; } @@ -3818,7 +3818,7 @@ static void virtio_net_instance_init(Object *obj) /* * The default config_size is sizeof(struct virtio_net_config). - * Can be overriden with virtio_net_set_config_size. + * Can be overridden with virtio_net_set_config_size. */ n->config_size = sizeof(struct virtio_net_config); device_add_bootindex_property(obj, &n->nic_conf.bootindex, diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c index 226c077..1b48d77 100644 --- a/hw/net/vmxnet3.c +++ b/hw/net/vmxnet3.c @@ -1889,7 +1889,7 @@ vmxnet3_io_bar1_read(void *opaque, hwaddr addr, unsigned size) break; default: - VMW_CBPRN("Unknow read BAR1[%" PRIx64 "], %d bytes", addr, size); + VMW_CBPRN("Unknown read BAR1[%" PRIx64 "], %d bytes", addr, size); break; } diff --git a/hw/net/vmxnet3.h b/hw/net/vmxnet3.h index bf4f6de..f9283f9 100644 --- a/hw/net/vmxnet3.h +++ b/hw/net/vmxnet3.h @@ -733,7 +733,7 @@ struct Vmxnet3_TxQueueDesc { struct Vmxnet3_RxQueueDesc { struct Vmxnet3_RxQueueCtrl ctrl; struct Vmxnet3_RxQueueConf conf; - /* Driver read after a GET commad */ + /* Driver read after a GET command */ struct Vmxnet3_QueueStatus status; struct UPT1_RxStats stats; u8 __pad[88]; /* 128 aligned */ diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c index 0326535..f026245 100644 --- a/hw/nvme/ctrl.c +++ b/hw/nvme/ctrl.c @@ -17,7 +17,7 @@ * Notes on coding style * --------------------- * While QEMU coding style prefers lowercase hexadecimals in constants, the - * NVMe subsystem use thes format from the NVMe specifications in the comments + * NVMe subsystem use this format from the NVMe specifications in the comments * (i.e. 'h' suffix instead of '0x' prefix). * * Usage @@ -730,7 +730,7 @@ static inline void nvme_sg_unmap(NvmeSg *sg) } /* - * When metadata is transfered as extended LBAs, the DPTR mapped into `sg` + * When metadata is transferred as extended LBAs, the DPTR mapped into `sg` * holds both data and metadata. This function splits the data and metadata * into two separate QSG/IOVs. */ @@ -7587,7 +7587,7 @@ static void nvme_process_db(NvmeCtrl *n, hwaddr addr, int val) /* * NVM Express v1.3d, Section 4.1 state: "If host software writes * an invalid value to the Submission Queue Tail Doorbell or - * Completion Queue Head Doorbell regiter and an Asynchronous Event + * Completion Queue Head Doorbell register and an Asynchronous Event * Request command is outstanding, then an asynchronous event is * posted to the Admin Completion Queue with a status code of * Invalid Doorbell Write Value." diff --git a/hw/nvram/eeprom_at24c.c b/hw/nvram/eeprom_at24c.c index 613c492..3272068 100644 --- a/hw/nvram/eeprom_at24c.c +++ b/hw/nvram/eeprom_at24c.c @@ -51,7 +51,7 @@ struct EEPROMState { bool writable; /* cells changed since last START? */ bool changed; - /* during WRITE, # of address bytes transfered */ + /* during WRITE, # of address bytes transferred */ uint8_t haveaddr; uint8_t *mem; diff --git a/hw/nvram/fw_cfg.c b/hw/nvram/fw_cfg.c index 29a5bef..4e45246 100644 --- a/hw/nvram/fw_cfg.c +++ b/hw/nvram/fw_cfg.c @@ -877,7 +877,7 @@ static struct { /* * Any sub-page size update to these table MRs will be lost during migration, * as we use aligned size in ram_load_precopy() -> qemu_ram_resize() path. - * In order to avoid the inconsistency in sizes save them seperately and + * In order to avoid the inconsistency in sizes save them separately and * migrate over in vmstate post_load(). */ static void fw_cfg_acpi_mr_save(FWCfgState *s, const char *filename, size_t len) diff --git a/hw/pci-bridge/cxl_downstream.c b/hw/pci-bridge/cxl_downstream.c index 54f5073..5a2b749 100644 --- a/hw/pci-bridge/cxl_downstream.c +++ b/hw/pci-bridge/cxl_downstream.c @@ -42,7 +42,7 @@ static void latch_registers(CXLDownstreamPort *dsp) CXL2_DOWNSTREAM_PORT); } -/* TODO: Look at sharing this code acorss all CXL port types */ +/* TODO: Look at sharing this code across all CXL port types */ static void cxl_dsp_dvsec_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len) { diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c index 9159f48..2b9cf0c 100644 --- a/hw/pci-bridge/cxl_upstream.c +++ b/hw/pci-bridge/cxl_upstream.c @@ -262,7 +262,7 @@ static int build_cdat_table(CDATSubHeader ***cdat_table, void *priv) .length = sslbis_size, }, .data_type = HMATLB_DATA_TYPE_ACCESS_BANDWIDTH, - .entry_base_unit = 1000, + .entry_base_unit = 1024, }, }; diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c index 613857b..535889f 100644 --- a/hw/pci-bridge/pci_expander_bridge.c +++ b/hw/pci-bridge/pci_expander_bridge.c @@ -263,7 +263,7 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin) /* * First carry out normal swizzle to handle - * multple root ports on a pxb instance. + * multiple root ports on a pxb instance. */ pin = pci_swizzle_map_irq_fn(pci_dev, pin); diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c index 4701481..ee6cb85 100644 --- a/hw/pci-host/bonito.c +++ b/hw/pci-host/bonito.c @@ -62,7 +62,7 @@ #define DPRINTF(fmt, ...) #endif -/* from linux soure code. include/asm-mips/mips-boards/bonito64.h*/ +/* from linux source code. include/asm-mips/mips-boards/bonito64.h*/ #define BONITO_BOOT_BASE 0x1fc00000 #define BONITO_BOOT_SIZE 0x00100000 #define BONITO_BOOT_TOP (BONITO_BOOT_BASE + BONITO_BOOT_SIZE - 1) diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index 388d252..6f5442f 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -488,7 +488,7 @@ static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) /* * If no inbound iATU windows are configured, HW defaults to - * letting inbound TLPs to pass in. We emulate that by exlicitly + * letting inbound TLPs to pass in. We emulate that by explicitly * configuring first inbound window to cover all of target's * address space. * @@ -503,7 +503,7 @@ static void designware_pcie_root_realize(PCIDevice *dev, Error **errp) &designware_pci_host_msi_ops, root, "pcie-msi", 0x4); /* - * We initially place MSI interrupt I/O region a adress 0 and + * We initially place MSI interrupt I/O region at address 0 and * disable it. It'll be later moved to correct offset and enabled * in designware_pcie_root_update_msi_mapping() as a part of * initialization done by guest OS diff --git a/hw/pci-host/dino.c b/hw/pci-host/dino.c index e8eaebc..8250322 100644 --- a/hw/pci-host/dino.c +++ b/hw/pci-host/dino.c @@ -1,5 +1,5 @@ /* - * HP-PARISC Dino PCI chipset emulation, as in B160L and similiar machines + * HP-PARISC Dino PCI chipset emulation, as in B160L and similar machines * * (C) 2017-2019 by Helge Deller <deller@gmx.de> * diff --git a/hw/pci-host/gpex-acpi.c b/hw/pci-host/gpex-acpi.c index 7c7316b..1092dc3 100644 --- a/hw/pci-host/gpex-acpi.c +++ b/hw/pci-host/gpex-acpi.c @@ -177,7 +177,7 @@ void acpi_dsdt_add_gpex(Aml *scope, struct GPEXConfig *cfg) acpi_dsdt_add_pci_route_table(dev, cfg->irq); /* - * Resources defined for PXBs are composed by the folling parts: + * Resources defined for PXBs are composed of the following parts: * 1. The resources the pci-brige/pcie-root-port need. * 2. The resources the devices behind pxb need. */ diff --git a/hw/pci-host/gt64120.c b/hw/pci-host/gt64120.c index 82c15ed..143bf05 100644 --- a/hw/pci-host/gt64120.c +++ b/hw/pci-host/gt64120.c @@ -331,9 +331,9 @@ static void gt64120_update_pci_cfgdata_mapping(GT64120State *s) /* * The setting of the MByteSwap bit and MWordSwap bit in the PCI Internal * Command Register determines how data transactions from the CPU to/from - * PCI are handled along with the setting of the Endianess bit in the CPU + * PCI are handled along with the setting of the Endianness bit in the CPU * Configuration Register. See: - * - Table 16: 32-bit PCI Transaction Endianess + * - Table 16: 32-bit PCI Transaction Endianness * - Table 158: PCI_0 Command, Offset: 0xc00 */ diff --git a/hw/pci-host/pnv_phb.c b/hw/pci-host/pnv_phb.c index 82332d7..157c007 100644 --- a/hw/pci-host/pnv_phb.c +++ b/hw/pci-host/pnv_phb.c @@ -25,7 +25,7 @@ * state associated with the child has an id, use it as QOM id. * Otherwise use object_typename[index] as QOM id. * - * This helper does both operations at the same time because seting + * This helper does both operations at the same time because setting * a new QOM child will erase the bus parent of the device. This happens * because object_unparent() will call object_property_del_child(), * which in turn calls the property release callback prop->release if diff --git a/hw/pci-host/pnv_phb3.c b/hw/pci-host/pnv_phb3.c index 7a21497..c5e58f4 100644 --- a/hw/pci-host/pnv_phb3.c +++ b/hw/pci-host/pnv_phb3.c @@ -757,7 +757,7 @@ static void pnv_phb3_translate_tve(PnvPhb3DMASpace *ds, hwaddr addr, * We only support non-translate in top window. * * TODO: Venice/Murano support it on bottom window above 4G and - * Naples suports it on everything + * Naples supports it on everything */ if (!(tve & PPC_BIT(51))) { phb3_error(phb, "xlate for invalid non-translate TVE"); diff --git a/hw/pci-host/pnv_phb3_msi.c b/hw/pci-host/pnv_phb3_msi.c index 41e63b0..dc8d863 100644 --- a/hw/pci-host/pnv_phb3_msi.c +++ b/hw/pci-host/pnv_phb3_msi.c @@ -281,7 +281,7 @@ static void phb3_msi_instance_init(Object *obj) object_property_allow_set_link, OBJ_PROP_LINK_STRONG); - /* Will be overriden later */ + /* Will be overridden later */ ics->offset = 0; } diff --git a/hw/pci-host/pnv_phb4.c b/hw/pci-host/pnv_phb4.c index 6232cbe..29cb11a 100644 --- a/hw/pci-host/pnv_phb4.c +++ b/hw/pci-host/pnv_phb4.c @@ -207,7 +207,7 @@ static void pnv_phb4_check_mbt(PnvPHB4 *phb, uint32_t index) start = base | (phb->regs[PHB_M64_UPPER_BITS >> 3]); } - /* TODO: Figure out how to implemet/decode AOMASK */ + /* TODO: Figure out how to implement/decode AOMASK */ /* Check if it matches an enabled MMIO region in the PEC stack */ if (memory_region_is_mapped(&phb->mmbar0) && @@ -391,7 +391,7 @@ static void pnv_phb4_ioda_write(PnvPHB4 *phb, uint64_t val) case IODA3_TBL_MBT: *tptr = val; - /* Copy accross the valid bit to the other half */ + /* Copy across the valid bit to the other half */ phb->ioda_MBT[idx ^ 1] &= 0x7fffffffffffffffull; phb->ioda_MBT[idx ^ 1] |= 0x8000000000000000ull & val; @@ -1408,7 +1408,7 @@ static void pnv_phb4_msi_write(void *opaque, hwaddr addr, return; } - /* TODO: check PE/MSI assignement */ + /* TODO: check PE/MSI assignment */ qemu_irq_pulse(phb->qirqs[src]); } diff --git a/hw/pci/pcie_aer.c b/hw/pci/pcie_aer.c index 374d593..b68c7ec 100644 --- a/hw/pci/pcie_aer.c +++ b/hw/pci/pcie_aer.c @@ -324,7 +324,7 @@ static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg) * it isn't implemented in qemu right now. * So just discard the error for now. * OS which cares of aer would receive errors via - * native aer mechanims, so this wouldn't matter. + * native aer mechanisms, so this wouldn't matter. */ } diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c index e7bc719..df7f370 100644 --- a/hw/pci/shpc.c +++ b/hw/pci/shpc.c @@ -615,7 +615,7 @@ int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, } if (nslots > SHPC_MAX_SLOTS || SHPC_IDX_TO_PCI(nslots) > PCI_SLOT_MAX) { - /* TODO: report an error mesage that makes sense. */ + /* TODO: report an error message that makes sense. */ return -EINVAL; } shpc->nslots = nslots; diff --git a/hw/ppc/ppc.c b/hw/ppc/ppc.c index aeb116d..be16771 100644 --- a/hw/ppc/ppc.c +++ b/hw/ppc/ppc.c @@ -738,7 +738,7 @@ static target_ulong _cpu_ppc_load_decr(CPUPPCState *env, int64_t now) decr = __cpu_ppc_load_decr(env, now, tb_env->decr_next); /* - * If large decrementer is enabled then the decrementer is signed extened + * If large decrementer is enabled then the decrementer is signed extended * to 64 bits, otherwise it is a 32 bit value. */ if (env->spr[SPR_LPCR] & LPCR_LD) { diff --git a/hw/ppc/prep_systemio.c b/hw/ppc/prep_systemio.c index 5a56f15..c96cefb 100644 --- a/hw/ppc/prep_systemio.c +++ b/hw/ppc/prep_systemio.c @@ -39,7 +39,7 @@ #define TYPE_PREP_SYSTEMIO "prep-systemio" OBJECT_DECLARE_SIMPLE_TYPE(PrepSystemIoState, PREP_SYSTEMIO) -/* Bit as defined in PowerPC Reference Plaform v1.1, sect. 6.1.5, p. 132 */ +/* Bit as defined in PowerPC Reference Platform v1.1, sect. 6.1.5, p. 132 */ #define PREP_BIT(n) (1 << (7 - (n))) struct PrepSystemIoState { diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index de3c616..1f1aa2a 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -2573,7 +2573,7 @@ static void spapr_set_vsmt_mode(SpaprMachineState *spapr, Error **errp) return; } - /* Detemine the VSMT mode to use: */ + /* Determine the VSMT mode to use: */ if (vsmt_user) { if (spapr->vsmt < smp_threads) { error_setg(errp, "Cannot support VSMT mode %d" @@ -3107,7 +3107,7 @@ static int spapr_kvm_type(MachineState *machine, const char *vm_type) { /* * The use of g_ascii_strcasecmp() for 'hv' and 'pr' is to - * accomodate the 'HV' and 'PV' formats that exists in the + * accommodate the 'HV' and 'PV' formats that exists in the * wild. The 'auto' mode is being introduced already as * lower-case, thus we don't need to bother checking for * "AUTO". @@ -4340,7 +4340,7 @@ spapr_cpu_index_to_props(MachineState *machine, unsigned cpu_index) CPUArchId *core_slot; MachineClass *mc = MACHINE_GET_CLASS(machine); - /* make sure possible_cpu are intialized */ + /* make sure possible_cpu are initialized */ mc->possible_cpu_arch_ids(machine); /* get CPU core slot containing thread that matches cpu_index */ core_slot = spapr_find_cpu_slot(machine, cpu_index, NULL); @@ -5034,7 +5034,7 @@ static void spapr_machine_2_12_class_options(MachineClass *mc) /* We depend on kvm_enabled() to choose a default value for the * hpt-max-page-size capability. Of course we can't do it here - * because this is too early and the HW accelerator isn't initialzed + * because this is too early and the HW accelerator isn't initialized * yet. Postpone this to machine init (see default_caps_with_cpu()). */ smc->default_caps.caps[SPAPR_CAP_HPT_MAXPAGESIZE] = 0; diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c index b7dc388..522a239 100644 --- a/hw/ppc/spapr_hcall.c +++ b/hw/ppc/spapr_hcall.c @@ -1615,7 +1615,7 @@ static void hypercall_register_types(void) spapr_register_hypercall(H_GET_CPU_CHARACTERISTICS, h_get_cpu_characteristics); - /* "debugger" hcalls (also used by SLOF). Note: We do -not- differenciate + /* "debugger" hcalls (also used by SLOF). Note: We do -not- differentiate * here between the "CI" and the "CACHE" variants, they will use whatever * mapping attributes qemu is using. When using KVM, the kernel will * enforce the attributes more strongly diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c index 60d6d0a..b2f009c 100644 --- a/hw/ppc/spapr_nvdimm.c +++ b/hw/ppc/spapr_nvdimm.c @@ -378,7 +378,7 @@ static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, SpaprMachineState *spapr, /* * Currently continue token should be zero qemu has already bound - * everything and this hcall doesnt return H_BUSY. + * everything and this hcall doesn't return H_BUSY. */ if (continue_token > 0) { return H_P5; @@ -589,7 +589,7 @@ void spapr_nvdimm_finish_flushes(void) * Called on reset path, the main loop thread which calls * the pending BHs has gotten out running in the reset path, * finally reaching here. Other code path being guest - * h_client_architecture_support, thats early boot up. + * h_client_architecture_support, that's early boot up. */ nvdimms = nvdimm_get_device_list(); for (list = nvdimms; list; list = list->next) { diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c index d8aeee0..9016720 100644 --- a/hw/ppc/spapr_pci_vfio.c +++ b/hw/ppc/spapr_pci_vfio.c @@ -78,7 +78,7 @@ int spapr_phb_vfio_eeh_set_option(SpaprPhbState *sphb, * call. Now we just need to check the validity of the PCI * pass-through devices (vfio-pci) under this sphb bus. * We have already validated that all the devices under this sphb - * are from same iommu group (within same PE) before comming here. + * are from same iommu group (within same PE) before coming here. * * Prior to linux commit 98ba956f6a389 ("powerpc/pseries/eeh: * Rework device EEH PE determination") kernel would call diff --git a/hw/rtc/exynos4210_rtc.c b/hw/rtc/exynos4210_rtc.c index 2b8a38a..cc7101c 100644 --- a/hw/rtc/exynos4210_rtc.c +++ b/hw/rtc/exynos4210_rtc.c @@ -202,7 +202,7 @@ static void exynos4210_rtc_update_freq(Exynos4210RTCState *s, uint32_t freq; freq = s->freq; - /* set frequncy for time generator */ + /* set frequency for time generator */ s->freq = RTC_BASE_FREQ / (1 << TICCKSEL(reg_value)); if (freq != s->freq) { diff --git a/hw/rx/rx62n.c b/hw/rx/rx62n.c index 3e887a0..d00fcb0 100644 --- a/hw/rx/rx62n.c +++ b/hw/rx/rx62n.c @@ -114,7 +114,7 @@ static const uint8_t ipr_table[NR_IRQS] = { }; /* - * Level triggerd IRQ list + * Level triggered IRQ list * Not listed IRQ is Edge trigger. * See "11.3.1 Interrupt Vector Table" in hardware manual. */ diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c index f7d45b0..634ed49 100644 --- a/hw/scsi/lsi53c895a.c +++ b/hw/scsi/lsi53c895a.c @@ -1321,7 +1321,7 @@ again: } trace_lsi_execute_script_io_selected(id, insn & (1 << 3) ? " ATN" : ""); - /* ??? Linux drivers compain when this is set. Maybe + /* ??? Linux drivers complain when this is set. Maybe it only applies in low-level mode (unimplemented). lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */ s->select_tag = id << 8; diff --git a/hw/scsi/mfi.h b/hw/scsi/mfi.h index 0b4ee53..cf7a2d7 100644 --- a/hw/scsi/mfi.h +++ b/hw/scsi/mfi.h @@ -65,7 +65,7 @@ #define MFI_IQPH 0xc4 /* Inbound queue port (high bytes) */ #define MFI_DIAG 0xf8 /* Host diag */ #define MFI_SEQ 0xfc /* Sequencer offset */ -#define MFI_1078_EIM 0x80000004 /* 1078 enable intrrupt mask */ +#define MFI_1078_EIM 0x80000004 /* 1078 enable interrupt mask */ #define MFI_RMI 0x2 /* reply message interrupt */ #define MFI_1078_RM 0x80000000 /* reply 1078 message interrupt */ #define MFI_ODC 0x4 /* outbound doorbell change interrupt */ diff --git a/hw/sh4/sh7750_regs.h b/hw/sh4/sh7750_regs.h index 9404343..edb5d18 100644 --- a/hw/sh4/sh7750_regs.h +++ b/hw/sh4/sh7750_regs.h @@ -113,7 +113,7 @@ #define SH7750_TTB SH7750_P4_REG32(SH7750_TTB_REGOFS) #define SH7750_TTB_A7 SH7750_A7_REG32(SH7750_TTB_REGOFS) -/* TLB exeption address register - TEA */ +/* TLB exception address register - TEA */ #define SH7750_TEA_REGOFS 0x00000c /* offset */ #define SH7750_TEA SH7750_P4_REG32(SH7750_TEA_REGOFS) #define SH7750_TEA_A7 SH7750_A7_REG32(SH7750_TEA_REGOFS) @@ -183,19 +183,19 @@ #define SH7750_TRA_IMM 0x000003fd /* Immediate data operand */ #define SH7750_TRA_IMM_S 2 -/* Exeption event register - EXPEVT */ +/* Exception event register - EXPEVT */ #define SH7750_EXPEVT_REGOFS 0x000024 #define SH7750_EXPEVT SH7750_P4_REG32(SH7750_EXPEVT_REGOFS) #define SH7750_EXPEVT_A7 SH7750_A7_REG32(SH7750_EXPEVT_REGOFS) -#define SH7750_EXPEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_EXPEVT_EX 0x00000fff /* Exception code */ #define SH7750_EXPEVT_EX_S 0 /* Interrupt event register */ #define SH7750_INTEVT_REGOFS 0x000028 #define SH7750_INTEVT SH7750_P4_REG32(SH7750_INTEVT_REGOFS) #define SH7750_INTEVT_A7 SH7750_A7_REG32(SH7750_INTEVT_REGOFS) -#define SH7750_INTEVT_EX 0x00000fff /* Exeption code */ +#define SH7750_INTEVT_EX 0x00000fff /* Exception code */ #define SH7750_INTEVT_EX_S 0 /* @@ -1274,15 +1274,15 @@ /* * User Break Controller registers */ -#define SH7750_BARA 0x200000 /* Break address regiser A */ -#define SH7750_BAMRA 0x200004 /* Break address mask regiser A */ -#define SH7750_BBRA 0x200008 /* Break bus cycle regiser A */ -#define SH7750_BARB 0x20000c /* Break address regiser B */ -#define SH7750_BAMRB 0x200010 /* Break address mask regiser B */ -#define SH7750_BBRB 0x200014 /* Break bus cycle regiser B */ -#define SH7750_BASRB 0x000018 /* Break ASID regiser B */ -#define SH7750_BDRB 0x200018 /* Break data regiser B */ -#define SH7750_BDMRB 0x20001c /* Break data mask regiser B */ +#define SH7750_BARA 0x200000 /* Break address register A */ +#define SH7750_BAMRA 0x200004 /* Break address mask register A */ +#define SH7750_BBRA 0x200008 /* Break bus cycle register A */ +#define SH7750_BARB 0x20000c /* Break address register B */ +#define SH7750_BAMRB 0x200010 /* Break address mask register B */ +#define SH7750_BBRB 0x200014 /* Break bus cycle register B */ +#define SH7750_BASRB 0x000018 /* Break ASID register B */ +#define SH7750_BDRB 0x200018 /* Break data register B */ +#define SH7750_BDMRB 0x20001c /* Break data mask register B */ #define SH7750_BRCR 0x200020 /* Break control register */ #define SH7750_BRCR_UDBE 0x0001 /* User break debug enable bit */ diff --git a/hw/smbios/smbios.c b/hw/smbios/smbios.c index 10cd22f..b753705 100644 --- a/hw/smbios/smbios.c +++ b/hw/smbios/smbios.c @@ -1110,7 +1110,7 @@ void smbios_get_tables(MachineState *ms, dimm_cnt = QEMU_ALIGN_UP(current_machine->ram_size, MAX_DIMM_SZ) / MAX_DIMM_SZ; /* - * The offset determines if we need to keep additional space betweeen + * The offset determines if we need to keep additional space between * table 17 and table 19 header handle numbers so that they do * not overlap. For example, for a VM with larger than 8 TB guest * memory and DIMM like chunks of 16 GiB, the default space between diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c index 97009d3..a3955c6 100644 --- a/hw/ssi/xilinx_spips.c +++ b/hw/ssi/xilinx_spips.c @@ -163,7 +163,7 @@ FIELD(GQSPI_CNFG, ENDIAN, 26, 1) /* Poll timeout not implemented */ FIELD(GQSPI_CNFG, EN_POLL_TIMEOUT, 20, 1) - /* QEMU doesnt care about any of these last three */ + /* QEMU doesn't care about any of these last three */ FIELD(GQSPI_CNFG, BR, 3, 3) FIELD(GQSPI_CNFG, CPH, 2, 1) FIELD(GQSPI_CNFG, CPL, 1, 1) @@ -469,7 +469,7 @@ static void xlnx_zynqmp_qspips_flush_fifo_g(XlnxZynqMPQSPIPS *s) imm = ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, IMMEDIATE_DATA); if (!ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, DATA_XFER)) { - /* immedate transfer */ + /* immediate transfer */ if (ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, TRANSMIT) || ARRAY_FIELD_EX32(s->regs, GQSPI_GF_SNAPSHOT, RECIEVE)) { s->regs[R_GQSPI_DATA_STS] = 1; @@ -768,7 +768,7 @@ static void xilinx_spips_check_zero_pump(XilinxSPIPS *s) */ while (s->regs[R_TRANSFER_SIZE] && s->rx_fifo.num + s->tx_fifo.num < RXFF_A_Q - 3) { - /* endianess just doesn't matter when zero pumping */ + /* endianness just doesn't matter when zero pumping */ tx_data_bytes(&s->tx_fifo, 0, 4, false); s->regs[R_TRANSFER_SIZE] &= ~0x03ull; s->regs[R_TRANSFER_SIZE] -= 4; diff --git a/hw/ssi/xlnx-versal-ospi.c b/hw/ssi/xlnx-versal-ospi.c index c762e0b..1a61679 100644 --- a/hw/ssi/xlnx-versal-ospi.c +++ b/hw/ssi/xlnx-versal-ospi.c @@ -837,7 +837,7 @@ static void ospi_do_ind_read(XlnxVersalOspi *s) /* Continue to read flash until we run out of space in sram */ while (!ospi_ind_op_completed(op) && !fifo8_is_full(&s->rx_sram)) { - /* Read reqested number of bytes, max bytes limited to size of sram */ + /* Read requested number of bytes, max bytes limited to size of sram */ next_b = ind_op_next_byte(op); end_b = next_b + fifo8_num_free(&s->rx_sram); end_b = MIN(end_b, ind_op_end_byte(op)); diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index 2d6d92e..f035b74 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -236,7 +236,7 @@ static void watchdog_hit(void *opaque) { ETRAXTimerState *t = opaque; if (t->wd_hits == 0) { - /* real hw gives a single tick before reseting but we are + /* real hw gives a single tick before resetting but we are a bit friendlier to compensate for our slower execution. */ ptimer_set_count(t->ptimer_wd, 10); ptimer_run(t->ptimer_wd, 1); diff --git a/hw/timer/renesas_tmr.c b/hw/timer/renesas_tmr.c index c15f654..43b3121 100644 --- a/hw/timer/renesas_tmr.c +++ b/hw/timer/renesas_tmr.c @@ -115,7 +115,7 @@ static int elapsed_time(RTMRState *tmr, int ch, int64_t delta) et = tmr->div_round[ch] / divrate; tmr->div_round[ch] %= divrate; } else { - /* disble clock. so no update */ + /* disable clock. so no update */ et = 0; } return et; diff --git a/hw/tpm/tpm_tis.h b/hw/tpm/tpm_tis.h index 6f29a50..6f14896 100644 --- a/hw/tpm/tpm_tis.h +++ b/hw/tpm/tpm_tis.h @@ -19,7 +19,7 @@ * specification. * * TPM TIS for TPM 2 implementation following TCG PC Client Platform - * TPM Profile (PTP) Specification, Familiy 2.0, Revision 00.43 + * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 */ #ifndef TPM_TPM_TIS_H #define TPM_TPM_TIS_H diff --git a/hw/tpm/tpm_tis_common.c b/hw/tpm/tpm_tis_common.c index c07c179..279ce43 100644 --- a/hw/tpm/tpm_tis_common.c +++ b/hw/tpm/tpm_tis_common.c @@ -20,7 +20,7 @@ * specification. * * TPM TIS for TPM 2 implementation following TCG PC Client Platform - * TPM Profile (PTP) Specification, Familiy 2.0, Revision 00.43 + * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 */ #include "qemu/osdep.h" #include "hw/irq.h" diff --git a/hw/tpm/tpm_tis_i2c.c b/hw/tpm/tpm_tis_i2c.c index b695fd3..4ecea7f 100644 --- a/hw/tpm/tpm_tis_i2c.c +++ b/hw/tpm/tpm_tis_i2c.c @@ -13,7 +13,7 @@ * Family 2.0, Level 00, Revision 1.00 * * TPM TIS for TPM 2 implementation following TCG PC Client Platform - * TPM Profile (PTP) Specification, Familiy 2.0, Revision 00.43 + * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 * */ @@ -507,7 +507,7 @@ static void tpm_tis_i2c_realizefn(DeviceState *dev, Error **errp) } /* - * Get the backend pointer. It is not initialized propery during + * Get the backend pointer. It is not initialized properly during * device_class_set_props */ s->be_driver = qemu_find_tpm_be("tpm0"); diff --git a/hw/tpm/tpm_tis_isa.c b/hw/tpm/tpm_tis_isa.c index 91e3792..0367401 100644 --- a/hw/tpm/tpm_tis_isa.c +++ b/hw/tpm/tpm_tis_isa.c @@ -19,7 +19,7 @@ * specification. * * TPM TIS for TPM 2 implementation following TCG PC Client Platform - * TPM Profile (PTP) Specification, Familiy 2.0, Revision 00.43 + * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 */ #include "qemu/osdep.h" diff --git a/hw/tpm/tpm_tis_sysbus.c b/hw/tpm/tpm_tis_sysbus.c index 6724b3d..2fc550f 100644 --- a/hw/tpm/tpm_tis_sysbus.c +++ b/hw/tpm/tpm_tis_sysbus.c @@ -19,7 +19,7 @@ * specification. * * TPM TIS for TPM 2 implementation following TCG PC Client Platform - * TPM Profile (PTP) Specification, Familiy 2.0, Revision 00.43 + * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 */ #include "qemu/osdep.h" diff --git a/hw/virtio/virtio-crypto.c b/hw/virtio/virtio-crypto.c index 13aec77..0e2cc8d 100644 --- a/hw/virtio/virtio-crypto.c +++ b/hw/virtio/virtio-crypto.c @@ -655,7 +655,7 @@ virtio_crypto_sym_op_helper(VirtIODevice *vdev, op_info->len_to_hash = len_to_hash; op_info->cipher_start_src_offset = cipher_start_src_offset; op_info->len_to_cipher = len_to_cipher; - /* Handle the initilization vector */ + /* Handle the initialization vector */ if (op_info->iv_len > 0) { DPRINTF("iv_len=%" PRIu32 "\n", op_info->iv_len); op_info->iv = op_info->data + curr_size; @@ -1278,7 +1278,7 @@ static void virtio_crypto_instance_init(Object *obj) /* * The default config_size is sizeof(struct virtio_crypto_config). - * Can be overriden with virtio_crypto_set_config_size. + * Can be overridden with virtio_crypto_set_config_size. */ vcrypto->config_size = sizeof(struct virtio_crypto_config); } diff --git a/hw/virtio/virtio-mem.c b/hw/virtio/virtio-mem.c index b6e7817..da5b09c 100644 --- a/hw/virtio/virtio-mem.c +++ b/hw/virtio/virtio-mem.c @@ -1119,7 +1119,7 @@ static int virtio_mem_mig_sanity_checks_post_load(void *opaque, int version_id) return -EINVAL; } /* - * Note: Preparation for resizeable memory regions. The maximum size + * Note: Preparation for resizable memory regions. The maximum size * of the memory region must not change during migration. */ if (tmp->region_size != new_region_size) { diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c index 969c25f..4577f3f 100644 --- a/hw/virtio/virtio.c +++ b/hw/virtio/virtio.c @@ -2096,7 +2096,7 @@ void virtio_queue_enable(VirtIODevice *vdev, uint32_t queue_index) * being converted to LOG_GUEST_ERROR. * if (!virtio_vdev_has_feature(vdev, VIRTIO_F_VERSION_1)) { - error_report("queue_enable is only suppported in devices of virtio " + error_report("queue_enable is only supported in devices of virtio " "1.0 or later."); } */ |