diff options
Diffstat (limited to 'hw')
-rw-r--r-- | hw/ide/ahci.c | 169 |
1 files changed, 86 insertions, 83 deletions
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c index d6b012c..94f28e6 100644 --- a/hw/ide/ahci.c +++ b/hw/ide/ahci.c @@ -946,10 +946,94 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis, } } +static void handle_reg_h2d_fis(AHCIState *s, int port, + int slot, uint8_t *cmd_fis) +{ + IDEState *ide_state = &s->dev[port].port.ifs[0]; + AHCICmdHdr *cmd = s->dev[port].cur_cmd; + uint32_t opts = le32_to_cpu(cmd->opts); + + if (cmd_fis[1] & 0x0F) { + DPRINTF(port, "Port Multiplier not supported." + " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", + cmd_fis[0], cmd_fis[1], cmd_fis[2]); + return; + } + + if (cmd_fis[1] & 0x70) { + DPRINTF(port, "Reserved flags set in H2D Register FIS." + " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", + cmd_fis[0], cmd_fis[1], cmd_fis[2]); + return; + } + + if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) { + switch (s->dev[port].port_state) { + case STATE_RUN: + if (cmd_fis[15] & ATA_SRST) { + s->dev[port].port_state = STATE_RESET; + } + break; + case STATE_RESET: + if (!(cmd_fis[15] & ATA_SRST)) { + ahci_reset_port(s, port); + } + break; + } + return; + } + + /* Check for NCQ command */ + if (is_ncq(cmd_fis[2])) { + process_ncq_command(s, port, cmd_fis, slot); + return; + } + + /* Decompose the FIS: + * AHCI does not interpret FIS packets, it only forwards them. + * SATA 1.0 describes how to decode LBA28 and CHS FIS packets. + * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets. + * + * ATA4 describes sector number for LBA28/CHS commands. + * ATA6 describes sector number for LBA48 commands. + * ATA8 deprecates CHS fully, describing only LBA28/48. + * + * We dutifully convert the FIS into IDE registers, and allow the + * core layer to interpret them as needed. */ + ide_state->feature = cmd_fis[3]; + ide_state->sector = cmd_fis[4]; /* LBA 7:0 */ + ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */ + ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */ + ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */ + ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */ + ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */ + ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */ + ide_state->hob_feature = cmd_fis[11]; + ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]); + /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */ + /* 15: Only valid when UPDATE_COMMAND not set. */ + + /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command + * table to ide_state->io_buffer */ + if (opts & AHCI_CMD_ATAPI) { + memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10); + debug_print_fis(ide_state->io_buffer, 0x10); + s->dev[port].done_atapi_packet = false; + /* XXX send PIO setup FIS */ + } + + ide_state->error = 0; + + /* Reset transferred byte counter */ + cmd->status = 0; + + /* We're ready to process the command in FIS byte 2. */ + ide_exec_cmd(&s->dev[port].port, cmd_fis[2]); +} + static int handle_cmd(AHCIState *s, int port, int slot) { IDEState *ide_state; - uint32_t opts; uint64_t tbl_addr; AHCICmdHdr *cmd; uint8_t *cmd_fis; @@ -976,7 +1060,6 @@ static int handle_cmd(AHCIState *s, int port, int slot) return -1; } - opts = le32_to_cpu(cmd->opts); tbl_addr = le64_to_cpu(cmd->tbl_addr); cmd_len = 0x80; cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len, @@ -995,93 +1078,13 @@ static int handle_cmd(AHCIState *s, int port, int slot) switch (cmd_fis[0]) { case SATA_FIS_TYPE_REGISTER_H2D: + handle_reg_h2d_fis(s, port, slot, cmd_fis); break; default: DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x " "cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1], cmd_fis[2]); - goto out; - break; - } - - if (cmd_fis[1] & 0x0F) { - DPRINTF(port, "Port Multiplier not supported." - " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", - cmd_fis[0], cmd_fis[1], cmd_fis[2]); - goto out; - } - - if (cmd_fis[1] & 0x70) { - DPRINTF(port, "Reserved flags set in H2D Register FIS." - " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n", - cmd_fis[0], cmd_fis[1], cmd_fis[2]); - goto out; - } - - if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) { - switch (s->dev[port].port_state) { - case STATE_RUN: - if (cmd_fis[15] & ATA_SRST) { - s->dev[port].port_state = STATE_RESET; - } break; - case STATE_RESET: - if (!(cmd_fis[15] & ATA_SRST)) { - ahci_reset_port(s, port); - } - break; - } - } - - else if (cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER) { - - /* Check for NCQ command */ - if (is_ncq(cmd_fis[2])) { - process_ncq_command(s, port, cmd_fis, slot); - goto out; - } - - /* Decompose the FIS: - * AHCI does not interpret FIS packets, it only forwards them. - * SATA 1.0 describes how to decode LBA28 and CHS FIS packets. - * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets. - * - * ATA4 describes sector number for LBA28/CHS commands. - * ATA6 describes sector number for LBA48 commands. - * ATA8 deprecates CHS fully, describing only LBA28/48. - * - * We dutifully convert the FIS into IDE registers, and allow the - * core layer to interpret them as needed. */ - ide_state->feature = cmd_fis[3]; - ide_state->sector = cmd_fis[4]; /* LBA 7:0 */ - ide_state->lcyl = cmd_fis[5]; /* LBA 15:8 */ - ide_state->hcyl = cmd_fis[6]; /* LBA 23:16 */ - ide_state->select = cmd_fis[7]; /* LBA 27:24 (LBA28) */ - ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */ - ide_state->hob_lcyl = cmd_fis[9]; /* LBA 39:32 */ - ide_state->hob_hcyl = cmd_fis[10]; /* LBA 47:40 */ - ide_state->hob_feature = cmd_fis[11]; - ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]); - /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */ - /* 15: Only valid when UPDATE_COMMAND not set. */ - - /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command - * table to ide_state->io_buffer - */ - if (opts & AHCI_CMD_ATAPI) { - memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10); - debug_print_fis(ide_state->io_buffer, 0x10); - s->dev[port].done_atapi_packet = false; - /* XXX send PIO setup FIS */ - } - - ide_state->error = 0; - - /* Reset transferred byte counter */ - cmd->status = 0; - - /* We're ready to process the command in FIS byte 2. */ - ide_exec_cmd(&s->dev[port].port, cmd_fis[2]); } out: |