diff options
Diffstat (limited to 'hw/vfio-user/protocol.h')
| -rw-r--r-- | hw/vfio-user/protocol.h | 242 |
1 files changed, 242 insertions, 0 deletions
diff --git a/hw/vfio-user/protocol.h b/hw/vfio-user/protocol.h new file mode 100644 index 0000000..3249a4a --- /dev/null +++ b/hw/vfio-user/protocol.h @@ -0,0 +1,242 @@ +#ifndef VFIO_USER_PROTOCOL_H +#define VFIO_USER_PROTOCOL_H + +/* + * vfio protocol over a UNIX socket. + * + * Copyright © 2018, 2021 Oracle and/or its affiliates. + * + * Each message has a standard header that describes the command + * being sent, which is almost always a VFIO ioctl(). + * + * The header may be followed by command-specific data, such as the + * region and offset info for read and write commands. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +typedef struct { + uint16_t id; + uint16_t command; + uint32_t size; + uint32_t flags; + uint32_t error_reply; +} VFIOUserHdr; + +/* VFIOUserHdr commands */ +enum vfio_user_command { + VFIO_USER_VERSION = 1, + VFIO_USER_DMA_MAP = 2, + VFIO_USER_DMA_UNMAP = 3, + VFIO_USER_DEVICE_GET_INFO = 4, + VFIO_USER_DEVICE_GET_REGION_INFO = 5, + VFIO_USER_DEVICE_GET_REGION_IO_FDS = 6, + VFIO_USER_DEVICE_GET_IRQ_INFO = 7, + VFIO_USER_DEVICE_SET_IRQS = 8, + VFIO_USER_REGION_READ = 9, + VFIO_USER_REGION_WRITE = 10, + VFIO_USER_DMA_READ = 11, + VFIO_USER_DMA_WRITE = 12, + VFIO_USER_DEVICE_RESET = 13, + VFIO_USER_DIRTY_PAGES = 14, + VFIO_USER_REGION_WRITE_MULTI = 15, + VFIO_USER_MAX, +}; + +/* VFIOUserHdr flags */ +#define VFIO_USER_REQUEST 0x0 +#define VFIO_USER_REPLY 0x1 +#define VFIO_USER_TYPE 0xF + +#define VFIO_USER_NO_REPLY 0x10 +#define VFIO_USER_ERROR 0x20 + + +/* + * VFIO_USER_VERSION + */ +typedef struct { + VFIOUserHdr hdr; + uint16_t major; + uint16_t minor; + char capabilities[]; +} VFIOUserVersion; + +#define VFIO_USER_MAJOR_VER 0 +#define VFIO_USER_MINOR_VER 0 + +#define VFIO_USER_CAP "capabilities" + +/* "capabilities" members */ +#define VFIO_USER_CAP_MAX_FDS "max_msg_fds" +#define VFIO_USER_CAP_MAX_XFER "max_data_xfer_size" +#define VFIO_USER_CAP_PGSIZES "pgsizes" +#define VFIO_USER_CAP_MAP_MAX "max_dma_maps" +#define VFIO_USER_CAP_MIGR "migration" +#define VFIO_USER_CAP_MULTI "write_multiple" + +/* "migration" members */ +#define VFIO_USER_CAP_PGSIZE "pgsize" +#define VFIO_USER_CAP_MAX_BITMAP "max_bitmap_size" + +/* + * Max FDs mainly comes into play when a device supports multiple interrupts + * where each ones uses an eventfd to inject it into the guest. + * It is clamped by the the number of FDs the qio channel supports in a + * single message. + */ +#define VFIO_USER_DEF_MAX_FDS 8 +#define VFIO_USER_MAX_MAX_FDS 16 + +/* + * Max transfer limits the amount of data in region and DMA messages. + * Region R/W will be very small (limited by how much a single instruction + * can process) so just use a reasonable limit here. + */ +#define VFIO_USER_DEF_MAX_XFER (1024 * 1024) +#define VFIO_USER_MAX_MAX_XFER (64 * 1024 * 1024) + +/* + * Default pagesizes supported is 4k. + */ +#define VFIO_USER_DEF_PGSIZE 4096 + +/* + * Default max number of DMA mappings is stolen from the + * linux kernel "dma_entry_limit" + */ +#define VFIO_USER_DEF_MAP_MAX 65535 + +/* + * Default max bitmap size is also take from the linux kernel, + * where usage of signed ints limits the VA range to 2^31 bytes. + * Dividing that by the number of bits per byte yields 256MB + */ +#define VFIO_USER_DEF_MAX_BITMAP (256 * 1024 * 1024) + +/* + * VFIO_USER_DMA_MAP + * imported from struct vfio_iommu_type1_dma_map + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint64_t offset; /* FD offset */ + uint64_t iova; + uint64_t size; +} VFIOUserDMAMap; + +/* + * VFIO_USER_DMA_UNMAP + * imported from struct vfio_iommu_type1_dma_unmap + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint64_t iova; + uint64_t size; +} VFIOUserDMAUnmap; + +/* + * VFIO_USER_DEVICE_GET_INFO + * imported from struct vfio_device_info + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint32_t num_regions; + uint32_t num_irqs; +} VFIOUserDeviceInfo; + +/* + * VFIO_USER_DEVICE_GET_REGION_INFO + * imported from struct vfio_region_info + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint32_t index; + uint32_t cap_offset; + uint64_t size; + uint64_t offset; +} VFIOUserRegionInfo; + +/* + * VFIO_USER_DEVICE_GET_IRQ_INFO + * imported from struct vfio_irq_info + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint32_t index; + uint32_t count; +} VFIOUserIRQInfo; + +/* + * VFIO_USER_DEVICE_SET_IRQS + * imported from struct vfio_irq_set + */ +typedef struct { + VFIOUserHdr hdr; + uint32_t argsz; + uint32_t flags; + uint32_t index; + uint32_t start; + uint32_t count; +} VFIOUserIRQSet; + +/* + * VFIO_USER_REGION_READ + * VFIO_USER_REGION_WRITE + */ +typedef struct { + VFIOUserHdr hdr; + uint64_t offset; + uint32_t region; + uint32_t count; + char data[]; +} VFIOUserRegionRW; + +/* + * VFIO_USER_DMA_READ + * VFIO_USER_DMA_WRITE + */ +typedef struct { + VFIOUserHdr hdr; + uint64_t offset; + uint32_t count; + char data[]; +} VFIOUserDMARW; + +/* imported from struct vfio_bitmap */ +typedef struct { + uint64_t pgsize; + uint64_t size; + char data[]; +} VFIOUserBitmap; + +/* + * VFIO_USER_REGION_WRITE_MULTI + */ +#define VFIO_USER_MULTI_DATA 8 +#define VFIO_USER_MULTI_MAX 200 + +typedef struct { + uint64_t offset; + uint32_t region; + uint32_t count; + char data[VFIO_USER_MULTI_DATA]; +} VFIOUserWROne; + +typedef struct { + VFIOUserHdr hdr; + uint64_t wr_cnt; + VFIOUserWROne wrs[VFIO_USER_MULTI_MAX]; +} VFIOUserWRMulti; + +#endif /* VFIO_USER_PROTOCOL_H */ |