diff options
Diffstat (limited to 'hw/misc')
-rw-r--r-- | hw/misc/bcm2835_property.c | 101 |
1 files changed, 51 insertions, 50 deletions
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index 251b3d8..7d398a6 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -12,6 +12,7 @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" +#include "hw/misc/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" @@ -51,48 +52,48 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* @(value + 8) : Request/response indicator */ resplen = 0; switch (tag) { - case 0x00000000: /* End tag */ + case RPI_FWREQ_PROPERTY_END: break; - case 0x00000001: /* Get firmware revision */ + case RPI_FWREQ_GET_FIRMWARE_REVISION: stl_le_phys(&s->dma_as, value + 12, 346337); resplen = 4; break; - case 0x00010001: /* Get board model */ + case RPI_FWREQ_GET_BOARD_MODEL: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x get board model NYI\n", tag); resplen = 4; break; - case 0x00010002: /* Get board revision */ + case RPI_FWREQ_GET_BOARD_REVISION: stl_le_phys(&s->dma_as, value + 12, s->board_rev); resplen = 4; break; - case 0x00010003: /* Get board MAC address */ + case RPI_FWREQ_GET_BOARD_MAC_ADDRESS: resplen = sizeof(s->macaddr.a); dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen, MEMTXATTRS_UNSPECIFIED); break; - case 0x00010004: /* Get board serial */ + case RPI_FWREQ_GET_BOARD_SERIAL: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x get board serial NYI\n", tag); resplen = 8; break; - case 0x00010005: /* Get ARM memory */ + case RPI_FWREQ_GET_ARM_MEMORY: /* base */ stl_le_phys(&s->dma_as, value + 12, 0); /* size */ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base); resplen = 8; break; - case 0x00010006: /* Get VC memory */ + case RPI_FWREQ_GET_VC_MEMORY: /* base */ stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base); /* size */ stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size); resplen = 8; break; - case 0x00028001: /* Set power state */ + case RPI_FWREQ_SET_POWER_STATE: /* Assume that whatever device they asked for exists, * and we'll just claim we set it to the desired state */ @@ -103,26 +104,26 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* Clocks */ - case 0x00030001: /* Get clock state */ + case RPI_FWREQ_GET_CLOCK_STATE: stl_le_phys(&s->dma_as, value + 16, 0x1); resplen = 8; break; - case 0x00038001: /* Set clock state */ + case RPI_FWREQ_SET_CLOCK_STATE: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x set clock state NYI\n", tag); resplen = 8; break; - case 0x00030002: /* Get clock rate */ - case 0x00030004: /* Get max clock rate */ - case 0x00030007: /* Get min clock rate */ + case RPI_FWREQ_GET_CLOCK_RATE: + case RPI_FWREQ_GET_MAX_CLOCK_RATE: + case RPI_FWREQ_GET_MIN_CLOCK_RATE: switch (ldl_le_phys(&s->dma_as, value + 12)) { - case 1: /* EMMC */ + case RPI_FIRMWARE_EMMC_CLK_ID: stl_le_phys(&s->dma_as, value + 16, 50000000); break; - case 2: /* UART */ + case RPI_FIRMWARE_UART_CLK_ID: stl_le_phys(&s->dma_as, value + 16, 3000000); break; default: @@ -132,9 +133,9 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) resplen = 8; break; - case 0x00038002: /* Set clock rate */ - case 0x00038004: /* Set max clock rate */ - case 0x00038007: /* Set min clock rate */ + case RPI_FWREQ_SET_CLOCK_RATE: + case RPI_FWREQ_SET_MAX_CLOCK_RATE: + case RPI_FWREQ_SET_MIN_CLOCK_RATE: qemu_log_mask(LOG_UNIMP, "bcm2835_property: 0x%08x set clock rate NYI\n", tag); @@ -143,121 +144,121 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) /* Temperature */ - case 0x00030006: /* Get temperature */ + case RPI_FWREQ_GET_TEMPERATURE: stl_le_phys(&s->dma_as, value + 16, 25000); resplen = 8; break; - case 0x0003000A: /* Get max temperature */ + case RPI_FWREQ_GET_MAX_TEMPERATURE: stl_le_phys(&s->dma_as, value + 16, 99000); resplen = 8; break; /* Frame buffer */ - case 0x00040001: /* Allocate buffer */ + case RPI_FWREQ_FRAMEBUFFER_ALLOCATE: stl_le_phys(&s->dma_as, value + 12, fbconfig.base); stl_le_phys(&s->dma_as, value + 16, bcm2835_fb_get_size(&fbconfig)); resplen = 8; break; - case 0x00048001: /* Release buffer */ + case RPI_FWREQ_FRAMEBUFFER_RELEASE: resplen = 0; break; - case 0x00040002: /* Blank screen */ + case RPI_FWREQ_FRAMEBUFFER_BLANK: resplen = 4; break; - case 0x00044003: /* Test physical display width/height */ - case 0x00044004: /* Test virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT: + case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT: resplen = 8; break; - case 0x00048003: /* Set physical display width/height */ + case RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT: fbconfig.xres = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yres = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040003: /* Get physical display width/height */ + case RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT: stl_le_phys(&s->dma_as, value + 12, fbconfig.xres); stl_le_phys(&s->dma_as, value + 16, fbconfig.yres); resplen = 8; break; - case 0x00048004: /* Set virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT: fbconfig.xres_virtual = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yres_virtual = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040004: /* Get virtual display width/height */ + case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT: stl_le_phys(&s->dma_as, value + 12, fbconfig.xres_virtual); stl_le_phys(&s->dma_as, value + 16, fbconfig.yres_virtual); resplen = 8; break; - case 0x00044005: /* Test depth */ + case RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH: resplen = 4; break; - case 0x00048005: /* Set depth */ + case RPI_FWREQ_FRAMEBUFFER_SET_DEPTH: fbconfig.bpp = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040005: /* Get depth */ + case RPI_FWREQ_FRAMEBUFFER_GET_DEPTH: stl_le_phys(&s->dma_as, value + 12, fbconfig.bpp); resplen = 4; break; - case 0x00044006: /* Test pixel order */ + case RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER: resplen = 4; break; - case 0x00048006: /* Set pixel order */ + case RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER: fbconfig.pixo = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040006: /* Get pixel order */ + case RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER: stl_le_phys(&s->dma_as, value + 12, fbconfig.pixo); resplen = 4; break; - case 0x00044007: /* Test pixel alpha */ + case RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE: resplen = 4; break; - case 0x00048007: /* Set alpha */ + case RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE: fbconfig.alpha = ldl_le_phys(&s->dma_as, value + 12); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040007: /* Get alpha */ + case RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE: stl_le_phys(&s->dma_as, value + 12, fbconfig.alpha); resplen = 4; break; - case 0x00040008: /* Get pitch */ + case RPI_FWREQ_FRAMEBUFFER_GET_PITCH: stl_le_phys(&s->dma_as, value + 12, bcm2835_fb_get_pitch(&fbconfig)); resplen = 4; break; - case 0x00044009: /* Test virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET: resplen = 8; break; - case 0x00048009: /* Set virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET: fbconfig.xoffset = ldl_le_phys(&s->dma_as, value + 12); fbconfig.yoffset = ldl_le_phys(&s->dma_as, value + 16); bcm2835_fb_validate_config(&fbconfig); fbconfig_updated = true; /* fall through */ - case 0x00040009: /* Get virtual offset */ + case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET: stl_le_phys(&s->dma_as, value + 12, fbconfig.xoffset); stl_le_phys(&s->dma_as, value + 16, fbconfig.yoffset); resplen = 8; break; - case 0x0004000a: /* Get/Test/Set overscan */ - case 0x0004400a: - case 0x0004800a: + case RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN: + case RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN: + case RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN: stl_le_phys(&s->dma_as, value + 12, 0); stl_le_phys(&s->dma_as, value + 16, 0); stl_le_phys(&s->dma_as, value + 20, 0); stl_le_phys(&s->dma_as, value + 24, 0); resplen = 16; break; - case 0x0004800b: /* Set palette */ + case RPI_FWREQ_FRAMEBUFFER_SET_PALETTE: offset = ldl_le_phys(&s->dma_as, value + 12); length = ldl_le_phys(&s->dma_as, value + 16); n = 0; @@ -270,18 +271,18 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value) stl_le_phys(&s->dma_as, value + 12, 0); resplen = 4; break; - case 0x00040013: /* Get number of displays */ + case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS: stl_le_phys(&s->dma_as, value + 12, 1); resplen = 4; break; - case 0x00060001: /* Get DMA channels */ + case RPI_FWREQ_GET_DMA_CHANNELS: /* channels 2-5 */ stl_le_phys(&s->dma_as, value + 12, 0x003C); resplen = 4; break; - case 0x00050001: /* Get command line */ + case RPI_FWREQ_GET_COMMAND_LINE: /* * We follow the firmware behaviour: no NUL terminator is * written to the buffer, and if the buffer is too short |