diff options
Diffstat (limited to 'hw/mips/loongson3_bootp.h')
| -rw-r--r-- | hw/mips/loongson3_bootp.h | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/hw/mips/loongson3_bootp.h b/hw/mips/loongson3_bootp.h new file mode 100644 index 0000000..09f8480 --- /dev/null +++ b/hw/mips/loongson3_bootp.h @@ -0,0 +1,241 @@ +/* + * LEFI (a UEFI-like interface for BIOS-Kernel boot parameters) data structures + * defined at arch/mips/include/asm/mach-loongson64/boot_param.h in Linux kernel + * + * Copyright (c) 2017-2020 Huacai Chen (chenhc@lemote.com) + * Copyright (c) 2017-2020 Jiaxun Yang <jiaxun.yang@flygoat.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ + +#ifndef HW_MIPS_LOONGSON3_BOOTP_H +#define HW_MIPS_LOONGSON3_BOOTP_H + +struct efi_memory_map_loongson { + uint16_t vers; /* version of efi_memory_map */ + uint32_t nr_map; /* number of memory_maps */ + uint32_t mem_freq; /* memory frequence */ + struct mem_map { + uint32_t node_id; /* node_id which memory attached to */ + uint32_t mem_type; /* system memory, pci memory, pci io, etc. */ + uint64_t mem_start; /* memory map start address */ + uint32_t mem_size; /* each memory_map size, not the total size */ + } map[128]; +} QEMU_PACKED; + +enum loongson_cpu_type { + Legacy_2E = 0x0, + Legacy_2F = 0x1, + Legacy_3A = 0x2, + Legacy_3B = 0x3, + Legacy_1A = 0x4, + Legacy_1B = 0x5, + Legacy_2G = 0x6, + Legacy_2H = 0x7, + Loongson_1A = 0x100, + Loongson_1B = 0x101, + Loongson_2E = 0x200, + Loongson_2F = 0x201, + Loongson_2G = 0x202, + Loongson_2H = 0x203, + Loongson_3A = 0x300, + Loongson_3B = 0x301 +}; + +/* + * Capability and feature descriptor structure for MIPS CPU + */ +struct efi_cpuinfo_loongson { + uint16_t vers; /* version of efi_cpuinfo_loongson */ + uint32_t processor_id; /* PRID, e.g. 6305, 6306 */ + uint32_t cputype; /* Loongson_3A/3B, etc. */ + uint32_t total_node; /* num of total numa nodes */ + uint16_t cpu_startup_core_id; /* Boot core id */ + uint16_t reserved_cores_mask; + uint32_t cpu_clock_freq; /* cpu_clock */ + uint32_t nr_cpus; + char cpuname[64]; +} QEMU_PACKED; + +#define MAX_UARTS 64 +struct uart_device { + uint32_t iotype; + uint32_t uartclk; + uint32_t int_offset; + uint64_t uart_base; +} QEMU_PACKED; + +#define MAX_SENSORS 64 +#define SENSOR_TEMPER 0x00000001 +#define SENSOR_VOLTAGE 0x00000002 +#define SENSOR_FAN 0x00000004 +struct sensor_device { + char name[32]; /* a formal name */ + char label[64]; /* a flexible description */ + uint32_t type; /* SENSOR_* */ + uint32_t id; /* instance id of a sensor-class */ + uint32_t fan_policy; /* step speed or constant speed */ + uint32_t fan_percent;/* only for constant speed policy */ + uint64_t base_addr; /* base address of device registers */ +} QEMU_PACKED; + +struct system_loongson { + uint16_t vers; /* version of system_loongson */ + uint32_t ccnuma_smp; /* 0: no numa; 1: has numa */ + uint32_t sing_double_channel;/* 1: single; 2: double */ + uint32_t nr_uarts; + struct uart_device uarts[MAX_UARTS]; + uint32_t nr_sensors; + struct sensor_device sensors[MAX_SENSORS]; + char has_ec; + char ec_name[32]; + uint64_t ec_base_addr; + char has_tcm; + char tcm_name[32]; + uint64_t tcm_base_addr; + uint64_t workarounds; + uint64_t of_dtb_addr; /* NULL if not support */ +} QEMU_PACKED; + +struct irq_source_routing_table { + uint16_t vers; + uint16_t size; + uint16_t rtr_bus; + uint16_t rtr_devfn; + uint32_t vendor; + uint32_t device; + uint32_t PIC_type; /* conform use HT or PCI to route to CPU-PIC */ + uint64_t ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */ + uint64_t ht_enable; /* irqs used in this PIC */ + uint32_t node_id; /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */ + uint64_t pci_mem_start_addr; + uint64_t pci_mem_end_addr; + uint64_t pci_io_start_addr; + uint64_t pci_io_end_addr; + uint64_t pci_config_addr; + uint16_t dma_mask_bits; + uint16_t dma_noncoherent; +} QEMU_PACKED; + +struct interface_info { + uint16_t vers; /* version of the specificition */ + uint16_t size; + uint8_t flag; + char description[64]; +} QEMU_PACKED; + +#define MAX_RESOURCE_NUMBER 128 +struct resource_loongson { + uint64_t start; /* resource start address */ + uint64_t end; /* resource end address */ + char name[64]; + uint32_t flags; +}; + +struct archdev_data {}; /* arch specific additions */ + +struct board_devices { + char name[64]; /* hold the device name */ + uint32_t num_resources; /* number of device_resource */ + /* for each device's resource */ + struct resource_loongson resource[MAX_RESOURCE_NUMBER]; + /* arch specific additions */ + struct archdev_data archdata; +}; + +struct loongson_special_attribute { + uint16_t vers; /* version of this special */ + char special_name[64]; /* special_atribute_name */ + uint32_t loongson_special_type; /* type of special device */ + /* for each device's resource */ + struct resource_loongson resource[MAX_RESOURCE_NUMBER]; +}; + +struct loongson_params { + uint64_t memory_offset; /* efi_memory_map_loongson struct offset */ + uint64_t cpu_offset; /* efi_cpuinfo_loongson struct offset */ + uint64_t system_offset; /* system_loongson struct offset */ + uint64_t irq_offset; /* irq_source_routing_table struct offset */ + uint64_t interface_offset; /* interface_info struct offset */ + uint64_t special_offset; /* loongson_special_attribute struct offset */ + uint64_t boarddev_table_offset; /* board_devices offset */ +}; + +struct smbios_tables { + uint16_t vers; /* version of smbios */ + uint64_t vga_bios; /* vga_bios address */ + struct loongson_params lp; +}; + +struct efi_reset_system_t { + uint64_t ResetCold; + uint64_t ResetWarm; + uint64_t ResetType; + uint64_t Shutdown; + uint64_t DoSuspend; /* NULL if not support */ +}; + +struct efi_loongson { + uint64_t mps; /* MPS table */ + uint64_t acpi; /* ACPI table (IA64 ext 0.71) */ + uint64_t acpi20; /* ACPI table (ACPI 2.0) */ + struct smbios_tables smbios; /* SM BIOS table */ + uint64_t sal_systab; /* SAL system table */ + uint64_t boot_info; /* boot info table */ +}; + +struct boot_params { + struct efi_loongson efi; + struct efi_reset_system_t reset_system; +}; + +/* Overall MMIO & Memory layout */ +enum { + VIRT_LOWMEM, + VIRT_PM, + VIRT_FW_CFG, + VIRT_RTC, + VIRT_PCIE_PIO, + VIRT_PCIE_ECAM, + VIRT_BIOS_ROM, + VIRT_UART, + VIRT_LIOINTC, + VIRT_PCIE_MMIO, + VIRT_HIGHMEM +}; + +/* Low MEM layout for QEMU kernel loader */ +enum { + LOADER_KERNEL, + LOADER_INITRD, + LOADER_CMDLINE +}; + +/* BIOS ROM layout for QEMU kernel loader */ +enum { + LOADER_BOOTROM, + LOADER_PARAM, +}; + +struct MemmapEntry { + hwaddr base; + hwaddr size; +}; + +extern const struct MemmapEntry virt_memmap[]; +void init_loongson_params(struct loongson_params *lp, void *p, + uint64_t cpu_freq, uint64_t ram_size); +void init_reset_system(struct efi_reset_system_t *reset); + +#endif |