5 files changed, 32 insertions, 16 deletions
diff --git a/docs/system/ppc/amigang.rst b/docs/system/ppc/amigang.rst
index e2c9cb7..21bb14e 100644
--- a/docs/system/ppc/amigang.rst
+++ b/docs/system/ppc/amigang.rst
@@ -21,6 +21,7 @@ Emulated devices
  * VIA VT82C686B south bridge
  * PCI VGA compatible card (guests may need other card instead)
  * PS/2 keyboard and mouse
+ * 4 KiB NVRAM (use ``-drive if=mtd,format=raw,file=nvram.bin`` to keep contents persistent)
 
 Firmware
 --------
@@ -54,14 +55,14 @@ To boot the system run:
                     -cdrom "A1 Linux Net Installer.iso" \
                     -device ati-vga,model=rv100,romfile=VGABIOS-lgpl-latest.bin
 
-From the firmware menu that appears select ``Boot sequence`` →
-``Amiga Multiboot Options`` and set ``Boot device 1`` to
-``Onboard VIA IDE CDROM``. Then hit escape until the main screen appears again,
-hit escape once more and from the exit menu that appears select either
-``Save settings and exit`` or ``Use settings for this session only``. It may
-take a long time loading the kernel into memory but eventually it boots and the
-installer becomes visible. The ``ati-vga`` RV100 emulation is not
-complete yet so only frame buffer works, DRM and 3D is not available.
+If a firmware menu appears, select ``Boot sequence`` → ``Amiga Multiboot Options``
+and set ``Boot device 1`` to ``Onboard VIA IDE CDROM``. Then hit escape until
+the main screen appears again, hit escape once more and from the exit menu that
+appears select either ``Save settings and exit`` or ``Use settings for this
+session only``. It may take a long time loading the kernel into memory but
+eventually it boots and the installer becomes visible. The ``ati-vga`` RV100
+emulation is not complete yet so only frame buffer works, DRM and 3D is not
+available.
 
 Genesi/bPlan Pegasos II (``pegasos2``)
 ======================================
diff --git a/docs/system/ppc/embedded.rst b/docs/system/ppc/embedded.rst
index af3b3d9..5cb7d98 100644
--- a/docs/system/ppc/embedded.rst
+++ b/docs/system/ppc/embedded.rst
@@ -4,6 +4,5 @@ Embedded family boards
 - ``bamboo``               bamboo
 - ``mpc8544ds``            mpc8544ds
 - ``ppce500``              generic paravirt e500 platform
-- ``ref405ep``             ref405ep
 - ``sam460ex``             aCube Sam460ex
 - ``virtex-ml507``         Xilinx Virtex ML507 reference design
diff --git a/docs/system/ppc/powermac.rst b/docs/system/ppc/powermac.rst
index 04334ba..3eac81c 100644
--- a/docs/system/ppc/powermac.rst
+++ b/docs/system/ppc/powermac.rst
@@ -4,8 +4,8 @@ PowerMac family boards (``g3beige``, ``mac99``)
 Use the executable ``qemu-system-ppc`` to simulate a complete PowerMac
 PowerPC system.
 
-- ``g3beige``              Heathrow based PowerMAC
-- ``mac99``                Mac99 based PowerMAC
+- ``g3beige``              Heathrow based PowerMac
+- ``mac99``                Mac99 based PowerMac
 
 Supported devices
 -----------------
diff --git a/docs/system/ppc/powernv.rst b/docs/system/ppc/powernv.rst
index 09f3965..f3ec2cc 100644
--- a/docs/system/ppc/powernv.rst
+++ b/docs/system/ppc/powernv.rst
@@ -181,7 +181,7 @@ connected to a remote QEMU machine acting as BMC, using these options
 
 .. code-block:: bash
 
-  -chardev socket,id=ipmi0,host=localhost,port=9002,reconnect=10 \
+  -chardev socket,id=ipmi0,host=localhost,port=9002,reconnect-ms=10000 \
   -device ipmi-bmc-extern,id=bmc0,chardev=ipmi0 \
   -device isa-ipmi-bt,bmc=bmc0,irq=10 \
   -nodefaults
@@ -195,6 +195,13 @@ Use a MTD drive to add a PNOR to the machine, and get a NVRAM :
 
   -drive file=./witherspoon.pnor,format=raw,if=mtd
 
+If no mtd drive is provided, the powernv platform will create a default
+PNOR device using a tiny formatted PNOR in pc-bios/pnv-pnor.bin opened
+read-only (PNOR changes will be persistent across reboots but not across
+invocations of QEMU). If no defaults are used, an erased 128MB PNOR is
+provided (which skiboot will probably not recognize since it is not
+formatted).
+
 Maintainer contact information
 ------------------------------
 
diff --git a/docs/system/ppc/pseries.rst b/docs/system/ppc/pseries.rst
index a876d89..bbc51aa 100644
--- a/docs/system/ppc/pseries.rst
+++ b/docs/system/ppc/pseries.rst
@@ -14,10 +14,19 @@ virtualization capabilities.
 Supported devices
 =================
 
- * Multi processor support for many Power processors generations: POWER7,
-   POWER7+, POWER8, POWER8NVL, POWER9, and Power10. Support for POWER5+ exists,
-   but its state is unknown.
- * Interrupt Controller, XICS (POWER8) and XIVE (POWER9 and Power10)
+ * Multi processor support for many Power processors generations:
+   - POWER7, POWER7+
+   - POWER8, POWER8NVL
+   - POWER9
+   - Power10
+   - Power11
+   - Support for POWER5+ also exists, works with correct kernel/userspace
+ * Interrupt Controller
+    - XICS (POWER8)
+    - XIVE (Supported by below:)
+        - POWER9
+        - Power10
+        - Power11
  * vPHB PCIe Host bridge.
  * vscsi and vnet devices, compatible with the same devices available on a
    PowerVM hypervisor with VIOS managing LPARs.