aboutsummaryrefslogtreecommitdiff
path: root/docs/system/arm/imx8mp-evk.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/system/arm/imx8mp-evk.rst')
-rw-r--r--docs/system/arm/imx8mp-evk.rst62
1 files changed, 62 insertions, 0 deletions
diff --git a/docs/system/arm/imx8mp-evk.rst b/docs/system/arm/imx8mp-evk.rst
new file mode 100644
index 0000000..b2f7d29
--- /dev/null
+++ b/docs/system/arm/imx8mp-evk.rst
@@ -0,0 +1,62 @@
+NXP i.MX 8M Plus Evaluation Kit (``imx8mp-evk``)
+================================================
+
+The ``imx8mp-evk`` machine models the i.MX 8M Plus Evaluation Kit, based on an
+i.MX 8M Plus SoC.
+
+Supported devices
+-----------------
+
+The ``imx8mp-evk`` machine implements the following devices:
+
+ * Up to 4 Cortex-A53 cores
+ * Generic Interrupt Controller (GICv3)
+ * 4 UARTs
+ * 3 USDHC Storage Controllers
+ * 1 Designware PCI Express Controller
+ * 1 Ethernet Controller
+ * 2 Designware USB 3 Controllers
+ * 5 GPIO Controllers
+ * 6 I2C Controllers
+ * 3 SPI Controllers
+ * 3 Watchdogs
+ * 6 General Purpose Timers
+ * Secure Non-Volatile Storage (SNVS) including an RTC
+ * Clock Tree
+
+Boot options
+------------
+
+The ``imx8mp-evk`` machine can start a Linux kernel directly using the standard
+``-kernel`` functionality.
+
+Direct Linux Kernel Boot
+''''''''''''''''''''''''
+
+Probably the easiest way to get started with a whole Linux system on the machine
+is to generate an image with Buildroot. Version 2024.11.1 is tested at the time
+of writing and involves two steps. First run the following commands in the
+toplevel directory of the Buildroot source tree:
+
+.. code-block:: bash
+
+ $ make freescale_imx8mpevk_defconfig
+ $ make
+
+Once finished successfully there is an ``output/image`` subfolder. Navigate into
+it and resize the SD card image to a power of two:
+
+.. code-block:: bash
+
+ $ qemu-img resize sdcard.img 256M
+
+Now that everything is prepared the machine can be started as follows:
+
+.. code-block:: bash
+
+ $ qemu-system-aarch64 -M imx8mp-evk -smp 4 -m 3G \
+ -display none -serial null -serial stdio \
+ -kernel Image \
+ -dtb imx8mp-evk.dtb \
+ -append "root=/dev/mmcblk2p2" \
+ -drive file=sdcard.img,if=sd,bus=2,format=raw,id=mmcblk2