aspeed/intc: Add AST2700 support

AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Block diagram of GICINT132:

            GICINT132
  ETH1    +-----------+
+-------->+0         3|
  ETH2    |          4|
+-------->+1         5|
  ETH3    |          6|
+-------->+2        19|                          INTC                          GIC
  UART0   |         20|            +--------------------------+
+-------->+7        21|            |                          |            +--------------+
  UART1   |         22|            |orgate0 +----> output_pin0+----------->+GIC128        |
+-------->+8        23|            |                          |            |              |
  UART2   |         24|            |orgate1 +----> output_pin1+----------->+GIC129        |
+-------->+9        25|            |                          |            |              |
  UART3   |         26|            |orgate2 +----> output_pin2+----------->+GIC130        |
+--------->10       27|            |                          |            |              |
  UART5   |         28|            |orgate3 +----> output_pin3+----------->+GIC131        |
+-------->+11       29|            |                          |            |              |
  UART6   |           +----------->+orgate4 +----> output_pin4+----------->+GIC132        |
+-------->+12       30|            |                          |            |              |
  UART7   |         31|            |orgate5 +----> output_pin5+----------->+GIC133        |
+-------->+13         |            |                          |            |              |
  UART8   |  OR[0:31] |            |orgate6 +----> output_pin6+----------->+GIC134        |
---------->14         |            |                          |            |              |
  UART9   |           |            |orgate7 +----> output_pin7+----------->+GIC135        |
--------->+15         |            |                          |            |              |
  UART10  |           |            |orgate8 +----> output_pin8+----------->+GIC136        |
--------->+16         |            |                          |            +--------------+
  UART11  |           |            +--------------------------+
+-------->+17         |
  UART12  |           |
+--------->18         |
          |           |
          |           |
          |           |
          +-----------+

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]

1 files changed, 44 insertions, 0 deletions

diff --git a/include/hw/intc/aspeed_intc.h b/include/hw/intc/aspeed_intc.h
new file mode 100644
index 0000000..18cb434
--- /dev/null
+++ b/include/hw/intc/aspeed_intc.h
@@ -0,0 +1,44 @@
+/*
+ * ASPEED INTC Controller
+ *
+ * Copyright (C) 2024 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+#ifndef ASPEED_INTC_H
+#define ASPEED_INTC_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+#include "hw/or-irq.h"
+
+#define TYPE_ASPEED_INTC "aspeed.intc"
+#define TYPE_ASPEED_2700_INTC TYPE_ASPEED_INTC "-ast2700"
+OBJECT_DECLARE_TYPE(AspeedINTCState, AspeedINTCClass, ASPEED_INTC)
+
+#define ASPEED_INTC_NR_REGS (0x2000 >> 2)
+#define ASPEED_INTC_NR_INTS 9
+
+struct AspeedINTCState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    uint32_t regs[ASPEED_INTC_NR_REGS];
+    OrIRQState orgates[ASPEED_INTC_NR_INTS];
+    qemu_irq output_pins[ASPEED_INTC_NR_INTS];
+
+    uint32_t enable[ASPEED_INTC_NR_INTS];
+    uint32_t mask[ASPEED_INTC_NR_INTS];
+    uint32_t pending[ASPEED_INTC_NR_INTS];
+};
+
+struct AspeedINTCClass {
+    SysBusDeviceClass parent_class;
+
+    uint32_t num_lines;
+    uint32_t num_ints;
+};
+
+#endif /* ASPEED_INTC_H */