update Linux headers to 4.16-rc5

Note that VIRTIO_GPU_CAPSET_VIRGL2 was added manually so it has to be added
manually after re-running scripts/update-linux-headers.sh.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

5 files changed, 44 insertions, 13 deletions

diff --git a/include/standard-headers/linux/input-event-codes.h b/include/standard-headers/linux/input-event-codes.h
index 79841b5..9e6a8ba 100644
--- a/include/standard-headers/linux/input-event-codes.h
+++ b/include/standard-headers/linux/input-event-codes.h
@@ -594,6 +594,7 @@
 #define BTN_DPAD_RIGHT		0x223
 
 #define KEY_ALS_TOGGLE		0x230	/* Ambient light sensor */
+#define KEY_ROTATE_LOCK_TOGGLE	0x231	/* Display rotation lock */
 
 #define KEY_BUTTONCONFIG		0x240	/* AL Button Configuration */
 #define KEY_TASKMANAGER		0x241	/* AL Task/Project Manager */
diff --git a/include/standard-headers/linux/input.h b/include/standard-headers/linux/input.h
index bc3e6d3..939b627 100644
--- a/include/standard-headers/linux/input.h
+++ b/include/standard-headers/linux/input.h
@@ -18,10 +18,21 @@
 
 /*
  * The event structure itself
+ * Note that __USE_TIME_BITS64 is defined by libc based on
+ * application's request to use 64 bit time_t.
  */
 
 struct input_event {
+#if (HOST_LONG_BITS != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL)
 	struct timeval time;
+#define input_event_sec time.tv_sec
+#define input_event_usec time.tv_usec
+#else
+	__kernel_ulong_t __sec;
+	__kernel_ulong_t __usec;
+#define input_event_sec  __sec
+#define input_event_usec __usec
+#endif
 	uint16_t type;
 	uint16_t code;
 	int32_t value;
diff --git a/include/standard-headers/linux/pci_regs.h b/include/standard-headers/linux/pci_regs.h
index 70c2b2a..0c79eac 100644
--- a/include/standard-headers/linux/pci_regs.h
+++ b/include/standard-headers/linux/pci_regs.h
@@ -622,15 +622,19 @@
  * safely.
  */
 #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
+#define  PCI_EXP_DEVCAP2_COMP_TMOUT_DIS	0x00000010 /* Completion Timeout Disable supported */
 #define  PCI_EXP_DEVCAP2_ARI		0x00000020 /* Alternative Routing-ID */
 #define  PCI_EXP_DEVCAP2_ATOMIC_ROUTE	0x00000040 /* Atomic Op routing */
-#define PCI_EXP_DEVCAP2_ATOMIC_COMP64	0x00000100 /* Atomic 64-bit compare */
+#define  PCI_EXP_DEVCAP2_ATOMIC_COMP32	0x00000080 /* 32b AtomicOp completion */
+#define  PCI_EXP_DEVCAP2_ATOMIC_COMP64	0x00000100 /* 64b AtomicOp completion */
+#define  PCI_EXP_DEVCAP2_ATOMIC_COMP128	0x00000200 /* 128b AtomicOp completion */
 #define  PCI_EXP_DEVCAP2_LTR		0x00000800 /* Latency tolerance reporting */
 #define  PCI_EXP_DEVCAP2_OBFF_MASK	0x000c0000 /* OBFF support mechanism */
 #define  PCI_EXP_DEVCAP2_OBFF_MSG	0x00040000 /* New message signaling */
 #define  PCI_EXP_DEVCAP2_OBFF_WAKE	0x00080000 /* Re-use WAKE# for OBFF */
 #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
 #define  PCI_EXP_DEVCTL2_COMP_TIMEOUT	0x000f	/* Completion Timeout Value */
+#define  PCI_EXP_DEVCTL2_COMP_TMOUT_DIS	0x0010	/* Completion Timeout Disable */
 #define  PCI_EXP_DEVCTL2_ARI		0x0020	/* Alternative Routing-ID */
 #define PCI_EXP_DEVCTL2_ATOMIC_REQ	0x0040	/* Set Atomic requests */
 #define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */
@@ -966,26 +970,28 @@
 
 /* Downstream Port Containment */
 #define PCI_EXP_DPC_CAP			4	/* DPC Capability */
-#define PCI_EXP_DPC_IRQ			0x1f	/* DPC Interrupt Message Number */
-#define  PCI_EXP_DPC_CAP_RP_EXT		0x20	/* Root Port Extensions for DPC */
-#define  PCI_EXP_DPC_CAP_POISONED_TLP	0x40	/* Poisoned TLP Egress Blocking Supported */
-#define  PCI_EXP_DPC_CAP_SW_TRIGGER	0x80	/* Software Triggering Supported */
-#define  PCI_EXP_DPC_RP_PIO_LOG_SIZE	0xF00	/* RP PIO log size */
+#define PCI_EXP_DPC_IRQ			0x001F	/* Interrupt Message Number */
+#define  PCI_EXP_DPC_CAP_RP_EXT		0x0020	/* Root Port Extensions */
+#define  PCI_EXP_DPC_CAP_POISONED_TLP	0x0040	/* Poisoned TLP Egress Blocking Supported */
+#define  PCI_EXP_DPC_CAP_SW_TRIGGER	0x0080	/* Software Triggering Supported */
+#define  PCI_EXP_DPC_RP_PIO_LOG_SIZE	0x0F00	/* RP PIO Log Size */
 #define  PCI_EXP_DPC_CAP_DL_ACTIVE	0x1000	/* ERR_COR signal on DL_Active supported */
 
 #define PCI_EXP_DPC_CTL			6	/* DPC control */
-#define  PCI_EXP_DPC_CTL_EN_NONFATAL 	0x02	/* Enable trigger on ERR_NONFATAL message */
-#define  PCI_EXP_DPC_CTL_INT_EN 	0x08	/* DPC Interrupt Enable */
+#define  PCI_EXP_DPC_CTL_EN_NONFATAL 	0x0002	/* Enable trigger on ERR_NONFATAL message */
+#define  PCI_EXP_DPC_CTL_INT_EN 	0x0008	/* DPC Interrupt Enable */
 
 #define PCI_EXP_DPC_STATUS		8	/* DPC Status */
-#define  PCI_EXP_DPC_STATUS_TRIGGER	0x01	/* Trigger Status */
-#define  PCI_EXP_DPC_STATUS_INTERRUPT	0x08	/* Interrupt Status */
-#define  PCI_EXP_DPC_RP_BUSY		0x10	/* Root Port Busy */
+#define  PCI_EXP_DPC_STATUS_TRIGGER	    0x0001 /* Trigger Status */
+#define  PCI_EXP_DPC_STATUS_TRIGGER_RSN	    0x0006 /* Trigger Reason */
+#define  PCI_EXP_DPC_STATUS_INTERRUPT	    0x0008 /* Interrupt Status */
+#define  PCI_EXP_DPC_RP_BUSY		    0x0010 /* Root Port Busy */
+#define  PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */
 
 #define PCI_EXP_DPC_SOURCE_ID		10	/* DPC Source Identifier */
 
 #define PCI_EXP_DPC_RP_PIO_STATUS	 0x0C	/* RP PIO Status */
-#define PCI_EXP_DPC_RP_PIO_MASK		 0x10	/* RP PIO MASK */
+#define PCI_EXP_DPC_RP_PIO_MASK		 0x10	/* RP PIO Mask */
 #define PCI_EXP_DPC_RP_PIO_SEVERITY	 0x14	/* RP PIO Severity */
 #define PCI_EXP_DPC_RP_PIO_SYSERROR	 0x18	/* RP PIO SysError */
 #define PCI_EXP_DPC_RP_PIO_EXCEPTION	 0x1C	/* RP PIO Exception */
diff --git a/include/standard-headers/linux/virtio_net.h b/include/standard-headers/linux/virtio_net.h
index 30ff249..e9f255e 100644
--- a/include/standard-headers/linux/virtio_net.h
+++ b/include/standard-headers/linux/virtio_net.h
@@ -57,6 +57,8 @@
 					 * Steering */
 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 
+#define VIRTIO_NET_F_SPEED_DUPLEX 63	/* Device set linkspeed and duplex */
+
 #ifndef VIRTIO_NET_NO_LEGACY
 #define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
 #endif /* VIRTIO_NET_NO_LEGACY */
@@ -76,6 +78,17 @@ struct virtio_net_config {
 	uint16_t max_virtqueue_pairs;
 	/* Default maximum transmit unit advice */
 	uint16_t mtu;
+	/*
+	 * speed, in units of 1Mb. All values 0 to INT_MAX are legal.
+	 * Any other value stands for unknown.
+	 */
+	uint32_t speed;
+	/*
+	 * 0x00 - half duplex
+	 * 0x01 - full duplex
+	 * Any other value stands for unknown.
+	 */
+	uint8_t duplex;
 } QEMU_PACKED;
 
 /*
diff --git a/include/standard-headers/linux/virtio_ring.h b/include/standard-headers/linux/virtio_ring.h
index f1dc05d..d26e72b 100644
--- a/include/standard-headers/linux/virtio_ring.h
+++ b/include/standard-headers/linux/virtio_ring.h
@@ -78,7 +78,7 @@ struct vring_avail {
 	__virtio16 ring[];
 };
 
-/* u32 is used here for ids for padding reasons. */
+/* uint32_t is used here for ids for padding reasons. */
 struct vring_used_elem {
 	/* Index of start of used descriptor chain. */
 	__virtio32 id;